Fixed MTP to work with TWRP

Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt

@@ -0,0 +1,61 @@
+* Renesas R-Car GPIO Controller
+
+Required Properties:
+
+  - compatible: should contain one of the following.
+    - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller.
+    - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
+    - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller.
+    - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2) compatible GPIO controller.
+    - "renesas,gpio-rcar": for generic R-Car GPIO controller.
+
+  - reg: Base address and length of each memory resource used by the GPIO
+    controller hardware module.
+
+  - interrupt-parent: phandle of the parent interrupt controller.
+  - interrupts: Interrupt specifier for the controllers interrupt.
+
+  - gpio-controller: Marks the device node as a gpio controller.
+  - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
+    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
+    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+  - gpio-ranges: Range of pins managed by the GPIO controller.
+
+Optional properties:
+
+  - clocks: Must contain a reference to the functional clock.  The property is
+    mandatory if the hardware implements a controllable functional clock for
+    the GPIO instance.
+
+Please refer to gpio.txt in this directory for details of gpio-ranges property
+and the common GPIO bindings used by client devices.
+
+The GPIO controller also acts as an interrupt controller. It uses the default
+two cells specifier as described in Documentation/devicetree/bindings/
+interrupt-controller/interrupts.txt.
+
+Example: R8A7779 (R-Car H1) GPIO controller nodes
+
+	gpio0: gpio@ffc40000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc40000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 141 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	...
+	gpio6: gpio@ffc46000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc46000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 147 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 9>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};