mirror of
https://github.com/AetherDroid/android_kernel_samsung_on5xelte.git
synced 2025-09-06 00:17:46 -04:00
Fixed MTP to work with TWRP
This commit is contained in:
awab228
commit
f6dfaef42e
50820 changed files with 20846062 additions and 0 deletions
|
|
@ -0,0 +1,30 @@
|
|||
* AUO in-cell touchscreen controller using Pixcir sensors
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "auo,auo_pixcir_ts"
|
||||
- reg: I2C address of the chip
|
||||
- interrupts: interrupt to which the chip is connected
|
||||
- gpios: gpios the chip is connected to
|
||||
first one is the interrupt gpio and second one the reset gpio
|
||||
- x-size: horizontal resolution of touchscreen
|
||||
- y-size: vertical resolution of touchscreen
|
||||
|
||||
Example:
|
||||
|
||||
i2c@00000000 {
|
||||
/* ... */
|
||||
|
||||
auo_pixcir_ts@5c {
|
||||
compatible = "auo,auo_pixcir_ts";
|
||||
reg = <0x5c>;
|
||||
interrupts = <2 0>;
|
||||
|
||||
gpios = <&gpf 2 0 2>, /* INT */
|
||||
<&gpf 5 1 0>; /* RST */
|
||||
|
||||
x-size = <800>;
|
||||
y-size = <600>;
|
||||
};
|
||||
|
||||
/* ... */
|
||||
};
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
* Rohm BU21013 Touch Screen
|
||||
|
||||
Required properties:
|
||||
- compatible : "rohm,bu21013_tp"
|
||||
- reg : I2C device address
|
||||
|
||||
Optional properties:
|
||||
- touch-gpio : GPIO pin registering a touch event
|
||||
- <supply_name>-supply : Phandle to a regulator supply
|
||||
- rohm,touch-max-x : Maximum outward permitted limit in the X axis
|
||||
- rohm,touch-max-y : Maximum outward permitted limit in the Y axis
|
||||
- rohm,flip-x : Flip touch coordinates on the X axis
|
||||
- rohm,flip-y : Flip touch coordinates on the Y axis
|
||||
|
||||
Example:
|
||||
|
||||
i2c@80110000 {
|
||||
bu21013_tp@0x5c {
|
||||
compatible = "rohm,bu21013_tp";
|
||||
reg = <0x5c>;
|
||||
touch-gpio = <&gpio2 20 0x4>;
|
||||
avdd-supply = <&ab8500_ldo_aux1_reg>;
|
||||
|
||||
rohm,touch-max-x = <384>;
|
||||
rohm,touch-max-y = <704>;
|
||||
rohm,flip-y;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
FocalTech EDT-FT5x06 Polytouch driver
|
||||
=====================================
|
||||
|
||||
There are 3 variants of the chip for various touch panel sizes
|
||||
FT5206GE1 2.8" .. 3.8"
|
||||
FT5306DE4 4.3" .. 7"
|
||||
FT5406EE8 7" .. 8.9"
|
||||
|
||||
The software interface is identical for all those chips, so that
|
||||
currently there is no need for the driver to distinguish between the
|
||||
different chips. Nevertheless distinct compatible strings are used so
|
||||
that a distinction can be added if necessary without changing the DT
|
||||
bindings.
|
||||
|
||||
|
||||
Required properties:
|
||||
- compatible: "edt,edt-ft5206"
|
||||
or: "edt,edt-ft5306"
|
||||
or: "edt,edt-ft5406"
|
||||
|
||||
- reg: I2C slave address of the chip (0x38)
|
||||
- interrupt-parent: a phandle pointing to the interrupt controller
|
||||
serving the interrupt for this chip
|
||||
- interrupts: interrupt specification for the touchdetect
|
||||
interrupt
|
||||
|
||||
Optional properties:
|
||||
- reset-gpios: GPIO specification for the RESET input
|
||||
- wake-gpios: GPIO specification for the WAKE input
|
||||
|
||||
- pinctrl-names: should be "default"
|
||||
- pinctrl-0: a phandle pointing to the pin settings for the
|
||||
control gpios
|
||||
|
||||
- threshold: allows setting the "click"-threshold in the range
|
||||
from 20 to 80.
|
||||
|
||||
- gain: allows setting the sensitivity in the range from 0 to
|
||||
31. Note that lower values indicate higher
|
||||
sensitivity.
|
||||
|
||||
- offset: allows setting the edge compensation in the range from
|
||||
0 to 31.
|
||||
|
||||
Example:
|
||||
polytouch: edt-ft5x06@38 {
|
||||
compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
|
||||
reg = <0x38>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&edt_ft5x06_pins>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <5 0>;
|
||||
reset-gpios = <&gpio2 6 1>;
|
||||
wake-gpios = <&gpio4 9 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
* EETI eGalax Multiple Touch Controller
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "eeti,egalax_ts"
|
||||
- reg: i2c slave address
|
||||
- interrupt-parent: the phandle for the interrupt controller
|
||||
- interrupts: touch controller interrupt
|
||||
- wakeup-gpios: the gpio pin to be used for waking up the controller
|
||||
and also used as irq pin
|
||||
|
||||
Example:
|
||||
|
||||
egalax_ts@04 {
|
||||
compatible = "eeti,egalax_ts";
|
||||
reg = <0x04>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <9 2>;
|
||||
wakeup-gpios = <&gpio1 9 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
* NXP LPC32xx SoC Touchscreen Controller (TSC)
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "nxp,lpc3220-tsc"
|
||||
- reg: physical base address of the controller and length of memory mapped
|
||||
region.
|
||||
- interrupts: The TSC/ADC interrupt
|
||||
|
||||
Example:
|
||||
|
||||
tsc@40048000 {
|
||||
compatible = "nxp,lpc3220-tsc";
|
||||
reg = <0x40048000 0x1000>;
|
||||
interrupt-parent = <&mic>;
|
||||
interrupts = <39 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,34 @@
|
|||
* MELFAS MMS114 touchscreen controller
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "melfas,mms114"
|
||||
- reg: I2C address of the chip
|
||||
- interrupts: interrupt to which the chip is connected
|
||||
- x-size: horizontal resolution of touchscreen
|
||||
- y-size: vertical resolution of touchscreen
|
||||
|
||||
Optional properties:
|
||||
- contact-threshold:
|
||||
- moving-threshold:
|
||||
- x-invert: invert X axis
|
||||
- y-invert: invert Y axis
|
||||
|
||||
Example:
|
||||
|
||||
i2c@00000000 {
|
||||
/* ... */
|
||||
|
||||
touchscreen@48 {
|
||||
compatible = "melfas,mms114";
|
||||
reg = <0x48>;
|
||||
interrupts = <39 0>;
|
||||
x-size = <720>;
|
||||
y-size = <1280>;
|
||||
contact-threshold = <10>;
|
||||
moving-threshold = <10>;
|
||||
x-invert;
|
||||
y-invert;
|
||||
};
|
||||
|
||||
/* ... */
|
||||
};
|
||||
|
|
@ -0,0 +1,26 @@
|
|||
* Pixcir I2C touchscreen controllers
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "pixcir,pixcir_ts" or "pixcir,pixcir_tangoc"
|
||||
- reg: I2C address of the chip
|
||||
- interrupts: interrupt to which the chip is connected
|
||||
- attb-gpio: GPIO connected to the ATTB line of the chip
|
||||
- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
|
||||
- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
|
||||
|
||||
Example:
|
||||
|
||||
i2c@00000000 {
|
||||
/* ... */
|
||||
|
||||
pixcir_ts@5c {
|
||||
compatible = "pixcir,pixcir_ts";
|
||||
reg = <0x5c>;
|
||||
interrupts = <2 0>;
|
||||
attb-gpio = <&gpf 2 0 2>;
|
||||
touchscreen-size-x = <800>;
|
||||
touchscreen-size-y = <600>;
|
||||
};
|
||||
|
||||
/* ... */
|
||||
};
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
* Sitronix st1232 touchscreen controller
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "sitronix,st1232"
|
||||
- reg: I2C address of the chip
|
||||
- interrupts: interrupt to which the chip is connected
|
||||
|
||||
Optional properties:
|
||||
- gpios: a phandle to the reset GPIO
|
||||
|
||||
Example:
|
||||
|
||||
i2c@00000000 {
|
||||
/* ... */
|
||||
|
||||
touchscreen@55 {
|
||||
compatible = "sitronix,st1232";
|
||||
reg = <0x55>;
|
||||
interrupts = <2 0>;
|
||||
gpios = <&gpio1 166 0>;
|
||||
};
|
||||
|
||||
/* ... */
|
||||
};
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
STMPE Touchscreen
|
||||
----------------
|
||||
|
||||
Required properties:
|
||||
- compatible: "st,stmpe-ts"
|
||||
|
||||
Optional properties:
|
||||
- st,sample-time: ADC converstion time in number of clock. (0 -> 36 clocks, 1 ->
|
||||
44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
|
||||
-> 144 clocks), recommended is 4.
|
||||
- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
|
||||
- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
|
||||
reference)
|
||||
- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
|
||||
- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
|
||||
samples, 3 -> 8 samples)
|
||||
- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
|
||||
100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended
|
||||
is 3
|
||||
- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3
|
||||
-> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2
|
||||
- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of
|
||||
the fractional part) recommended is 7
|
||||
- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35
|
||||
mA max, 1 -> 50 mA typical 80 mA max)
|
||||
|
||||
Node name must be stmpe_touchscreen and should be child node of stmpe node to
|
||||
which it belongs.
|
||||
|
||||
Example:
|
||||
|
||||
stmpe_touchscreen {
|
||||
compatible = "st,stmpe-ts";
|
||||
st,sample-time = <4>;
|
||||
st,mod-12b = <1>;
|
||||
st,ref-sel = <0>;
|
||||
st,adc-freq = <1>;
|
||||
st,ave-ctrl = <1>;
|
||||
st,touch-det-delay = <2>;
|
||||
st,settling = <2>;
|
||||
st,fraction-z = <7>;
|
||||
st,i-drive = <1>;
|
||||
};
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
sun4i resistive touchscreen controller
|
||||
--------------------------------------
|
||||
|
||||
Required properties:
|
||||
- compatible: "allwinner,sun4i-a10-ts"
|
||||
- reg: mmio address range of the chip
|
||||
- interrupts: interrupt to which the chip is connected
|
||||
|
||||
Optional properties:
|
||||
- allwinner,ts-attached: boolean indicating that an actual touchscreen is
|
||||
attached to the controller
|
||||
|
||||
Example:
|
||||
|
||||
rtp: rtp@01c25000 {
|
||||
compatible = "allwinner,sun4i-a10-ts";
|
||||
reg = <0x01c25000 0x100>;
|
||||
interrupts = <29>;
|
||||
allwinner,ts-attached;
|
||||
};
|
||||
|
|
@ -0,0 +1,44 @@
|
|||
* TI - TSC ADC (Touschscreen and analog digital converter)
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
Required properties:
|
||||
- child "tsc"
|
||||
ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
|
||||
support on the platform.
|
||||
ti,x-plate-resistance: X plate resistance
|
||||
ti,coordinate-readouts: The sequencer supports a total of 16
|
||||
programmable steps each step is used to
|
||||
read a single coordinate. A single
|
||||
readout is enough but multiple reads can
|
||||
increase the quality.
|
||||
A value of 5 means, 5 reads for X, 5 for
|
||||
Y and 2 for Z (always). This utilises 12
|
||||
of the 16 software steps available. The
|
||||
remaining 4 can be used by the ADC.
|
||||
ti,wire-config: Different boards could have a different order for
|
||||
connecting wires on touchscreen. We need to provide an
|
||||
8 bit number where in the 1st four bits represent the
|
||||
analog lines and the next 4 bits represent positive/
|
||||
negative terminal on that input line. Notations to
|
||||
represent the input lines and terminals resoectively
|
||||
is as follows:
|
||||
AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
|
||||
XP = 0, XN = 1, YP = 2, YN = 3.
|
||||
- child "adc"
|
||||
ti,adc-channels: List of analog inputs available for ADC.
|
||||
AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
|
||||
|
||||
Example:
|
||||
tscadc: tscadc@44e0d000 {
|
||||
compatible = "ti,am3359-tscadc";
|
||||
tsc {
|
||||
ti,wires = <4>;
|
||||
ti,x-plate-resistance = <200>;
|
||||
ti,coordiante-readouts = <5>;
|
||||
ti,wire-config = <0x00 0x11 0x22 0x33>;
|
||||
};
|
||||
|
||||
adc {
|
||||
ti,adc-channels = <4 5 6 7>;
|
||||
};
|
||||
}
|
||||
|
|
@ -0,0 +1,27 @@
|
|||
General Touchscreen Properties:
|
||||
|
||||
Optional properties for Touchscreens:
|
||||
- touchscreen-size-x : horizontal resolution of touchscreen
|
||||
(in pixels)
|
||||
- touchscreen-size-y : vertical resolution of touchscreen
|
||||
(in pixels)
|
||||
- touchscreen-max-pressure : maximum reported pressure (arbitrary range
|
||||
dependent on the controller)
|
||||
- touchscreen-fuzz-x : horizontal noise value of the absolute input
|
||||
device (in pixels)
|
||||
- touchscreen-fuzz-y : vertical noise value of the absolute input
|
||||
device (in pixels)
|
||||
- touchscreen-fuzz-pressure : pressure noise value of the absolute input
|
||||
device (arbitrary range dependent on the
|
||||
controller)
|
||||
- touchscreen-inverted-x : X axis is inverted (boolean)
|
||||
- touchscreen-inverted-y : Y axis is inverted (boolean)
|
||||
|
||||
Deprecated properties for Touchscreens:
|
||||
- x-size : deprecated name for touchscreen-size-x
|
||||
- y-size : deprecated name for touchscreen-size-y
|
||||
- moving-threshold : deprecated name for a combination of
|
||||
touchscreen-fuzz-x and touchscreen-fuzz-y
|
||||
- contact-threshold : deprecated name for touchscreen-fuzz-pressure
|
||||
- x-invert : deprecated name for touchscreen-inverted-x
|
||||
- y-invert : deprecated name for touchscreen-inverted-y
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
* Texas Instruments tsc2005 touchscreen controller
|
||||
|
||||
Required properties:
|
||||
- compatible : "ti,tsc2005"
|
||||
- reg : SPI device address
|
||||
- spi-max-frequency : Maximal SPI speed
|
||||
- interrupts : IRQ specifier
|
||||
- reset-gpios : GPIO specifier
|
||||
- vio-supply : Regulator specifier
|
||||
|
||||
Optional properties:
|
||||
- ti,x-plate-ohms : integer, resistance of the touchscreen's X plates
|
||||
in ohm (defaults to 280)
|
||||
- ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after
|
||||
the configured time (in milli seconds), the driver
|
||||
will reset it. This is disabled by default.
|
||||
- properties defined in touchscreen.txt
|
||||
|
||||
Example:
|
||||
|
||||
&mcspi1 {
|
||||
tsc2005@0 {
|
||||
compatible = "ti,tsc2005";
|
||||
spi-max-frequency = <6000000>;
|
||||
reg = <0>;
|
||||
|
||||
vio-supply = <&vio>;
|
||||
|
||||
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
|
||||
interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
|
||||
|
||||
touchscreen-fuzz-x = <4>;
|
||||
touchscreen-fuzz-y = <7>;
|
||||
touchscreen-fuzz-pressure = <2>;
|
||||
touchscreen-max-x = <4096>;
|
||||
touchscreen-max-y = <4096>;
|
||||
touchscreen-max-pressure = <2048>;
|
||||
|
||||
ti,x-plate-ohms = <280>;
|
||||
ti,esd-recovery-timeout-ms = <8000>;
|
||||
};
|
||||
}
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
* Texas Instruments tsc2007 touchscreen controller
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "ti,tsc2007".
|
||||
- reg: I2C address of the chip.
|
||||
- ti,x-plate-ohms: X-plate resistance in ohms.
|
||||
|
||||
Optional properties:
|
||||
- gpios: the interrupt gpio the chip is connected to (trough the penirq pin).
|
||||
The penirq pin goes to low when the panel is touched.
|
||||
(see GPIO binding[1] for more details).
|
||||
- interrupt-parent: the phandle for the gpio controller
|
||||
(see interrupt binding[0]).
|
||||
- interrupts: (gpio) interrupt to which the chip is connected
|
||||
(see interrupt binding[0]).
|
||||
- ti,max-rt: maximum pressure.
|
||||
- ti,fuzzx: specifies the absolute input fuzz x value.
|
||||
If set, it will permit noise in the data up to +- the value given to the fuzz
|
||||
parameter, that is used to filter noise from the event stream.
|
||||
- ti,fuzzy: specifies the absolute input fuzz y value.
|
||||
- ti,fuzzz: specifies the absolute input fuzz z value.
|
||||
- ti,poll-period: how much time to wait (in milliseconds) before reading again the
|
||||
values from the tsc2007.
|
||||
|
||||
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
||||
[1]: Documentation/devicetree/bindings/gpio/gpio.txt
|
||||
|
||||
Example:
|
||||
&i2c1 {
|
||||
/* ... */
|
||||
tsc2007@49 {
|
||||
compatible = "ti,tsc2007";
|
||||
reg = <0x49>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <0x0 0x8>;
|
||||
gpios = <&gpio4 0 0>;
|
||||
ti,x-plate-ohms = <180>;
|
||||
};
|
||||
|
||||
/* ... */
|
||||
};
|
||||
|
|
@ -0,0 +1,34 @@
|
|||
* Neonode infrared touchscreen controller
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "neonode,zforce"
|
||||
- reg: I2C address of the chip
|
||||
- interrupts: interrupt to which the chip is connected
|
||||
- gpios: gpios the chip is connected to
|
||||
first one is the interrupt gpio and second one the reset gpio
|
||||
- x-size: horizontal resolution of touchscreen
|
||||
- y-size: vertical resolution of touchscreen
|
||||
|
||||
Optional properties:
|
||||
- vdd-supply: Regulator controlling the controller supply
|
||||
|
||||
Example:
|
||||
|
||||
i2c@00000000 {
|
||||
/* ... */
|
||||
|
||||
zforce_ts@50 {
|
||||
compatible = "neonode,zforce";
|
||||
reg = <0x50>;
|
||||
interrupts = <2 0>;
|
||||
vdd-supply = <®_zforce_vdd>;
|
||||
|
||||
gpios = <&gpio5 6 0>, /* INT */
|
||||
<&gpio5 9 0>; /* RST */
|
||||
|
||||
x-size = <800>;
|
||||
y-size = <600>;
|
||||
};
|
||||
|
||||
/* ... */
|
||||
};
|
||||
Loading…
Add table
Add a link
Reference in a new issue