mirror of
https://github.com/AetherDroid/android_kernel_samsung_on5xelte.git
synced 2025-09-07 08:48:05 -04:00
Fixed MTP to work with TWRP
This commit is contained in:
awab228
commit
f6dfaef42e
50820 changed files with 20846062 additions and 0 deletions
304
Documentation/devicetree/bindings/pci/mvebu-pci.txt
Normal file
304
Documentation/devicetree/bindings/pci/mvebu-pci.txt
Normal file
|
|
@ -0,0 +1,304 @@
|
|||
* Marvell EBU PCIe interfaces
|
||||
|
||||
Mandatory properties:
|
||||
|
||||
- compatible: one of the following values:
|
||||
marvell,armada-370-pcie
|
||||
marvell,armada-xp-pcie
|
||||
marvell,dove-pcie
|
||||
marvell,kirkwood-pcie
|
||||
- #address-cells, set to <3>
|
||||
- #size-cells, set to <2>
|
||||
- #interrupt-cells, set to <1>
|
||||
- bus-range: PCI bus numbers covered
|
||||
- device_type, set to "pci"
|
||||
- ranges: ranges describing the MMIO registers to control the PCIe
|
||||
interfaces, and ranges describing the MBus windows needed to access
|
||||
the memory and I/O regions of each PCIe interface.
|
||||
- msi-parent: Link to the hardware entity that serves as the Message
|
||||
Signaled Interrupt controller for this PCI controller.
|
||||
|
||||
The ranges describing the MMIO registers have the following layout:
|
||||
|
||||
0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s
|
||||
|
||||
where:
|
||||
|
||||
* r is a 32-bits value that gives the offset of the MMIO
|
||||
registers of this PCIe interface, from the base of the internal
|
||||
registers.
|
||||
|
||||
* s is a 32-bits value that give the size of this MMIO
|
||||
registers area. This range entry translates the '0x82000000 0 r' PCI
|
||||
address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part
|
||||
of the internal register window (as identified by MBUS_ID(0xf0,
|
||||
0x01)).
|
||||
|
||||
The ranges describing the MBus windows have the following layout:
|
||||
|
||||
0x8t000000 s 0 MBUS_ID(w, a) 0 1 0
|
||||
|
||||
where:
|
||||
|
||||
* t is the type of the MBus window (as defined by the standard PCI DT
|
||||
bindings), 1 for I/O and 2 for memory.
|
||||
|
||||
* s is the PCI slot that corresponds to this PCIe interface
|
||||
|
||||
* w is the 'target ID' value for the MBus window
|
||||
|
||||
* a the 'attribute' value for the MBus window.
|
||||
|
||||
Since the location and size of the different MBus windows is not fixed in
|
||||
hardware, and only determined in runtime, those ranges cover the full first
|
||||
4 GB of the physical address space, and do not translate into a valid CPU
|
||||
address.
|
||||
|
||||
In addition, the device tree node must have sub-nodes describing each
|
||||
PCIe interface, having the following mandatory properties:
|
||||
|
||||
- reg: used only for interrupt mapping, so only the first four bytes
|
||||
are used to refer to the correct bus number and device number.
|
||||
- assigned-addresses: reference to the MMIO registers used to control
|
||||
this PCIe interface.
|
||||
- clocks: the clock associated to this PCIe interface
|
||||
- marvell,pcie-port: the physical PCIe port number
|
||||
- status: either "disabled" or "okay"
|
||||
- device_type, set to "pci"
|
||||
- #address-cells, set to <3>
|
||||
- #size-cells, set to <2>
|
||||
- #interrupt-cells, set to <1>
|
||||
- ranges, translating the MBus windows ranges of the parent node into
|
||||
standard PCI addresses.
|
||||
- interrupt-map-mask and interrupt-map, standard PCI properties to
|
||||
define the mapping of the PCIe interface to interrupt numbers.
|
||||
|
||||
and the following optional properties:
|
||||
- marvell,pcie-lane: the physical PCIe lane number, for ports having
|
||||
multiple lanes. If this property is not found, we assume that the
|
||||
value is 0.
|
||||
- reset-gpios: optional gpio to PERST#
|
||||
- reset-delay-us: delay in us to wait after reset de-assertion
|
||||
|
||||
Example:
|
||||
|
||||
pcie-controller {
|
||||
compatible = "marvell,armada-xp-pcie";
|
||||
status = "disabled";
|
||||
device_type = "pci";
|
||||
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
bus-range = <0x00 0xff>;
|
||||
msi-parent = <&mpic>;
|
||||
|
||||
ranges =
|
||||
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
|
||||
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
|
||||
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
|
||||
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
|
||||
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
|
||||
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
|
||||
0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
|
||||
0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
|
||||
0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
|
||||
0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
|
||||
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
|
||||
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
|
||||
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
|
||||
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
|
||||
0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
|
||||
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
|
||||
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
|
||||
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
|
||||
|
||||
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
|
||||
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
|
||||
0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
|
||||
0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
|
||||
0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
|
||||
0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
|
||||
0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
|
||||
0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
|
||||
|
||||
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
|
||||
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */
|
||||
|
||||
0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
|
||||
0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
|
||||
|
||||
pcie@1,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
|
||||
reg = <0x0800 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x1 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 58>;
|
||||
marvell,pcie-port = <0>;
|
||||
marvell,pcie-lane = <0>;
|
||||
/* low-active PERST# reset on GPIO 25 */
|
||||
reset-gpios = <&gpio0 25 1>;
|
||||
/* wait 20ms for device settle after reset deassertion */
|
||||
reset-delay-us = <20000>;
|
||||
clocks = <&gateclk 5>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@2,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
|
||||
reg = <0x1000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x2 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 59>;
|
||||
marvell,pcie-port = <0>;
|
||||
marvell,pcie-lane = <1>;
|
||||
clocks = <&gateclk 6>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@3,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
|
||||
reg = <0x1800 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x3 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 60>;
|
||||
marvell,pcie-port = <0>;
|
||||
marvell,pcie-lane = <2>;
|
||||
clocks = <&gateclk 7>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@4,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
|
||||
reg = <0x2000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x4 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 61>;
|
||||
marvell,pcie-port = <0>;
|
||||
marvell,pcie-lane = <3>;
|
||||
clocks = <&gateclk 8>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@5,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
|
||||
reg = <0x2800 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x5 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 62>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <0>;
|
||||
clocks = <&gateclk 9>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@6,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
|
||||
reg = <0x3000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x6 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 63>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <1>;
|
||||
clocks = <&gateclk 10>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@7,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
|
||||
reg = <0x3800 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x7 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 64>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <2>;
|
||||
clocks = <&gateclk 11>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@8,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
|
||||
reg = <0x4000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x8 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 65>;
|
||||
marvell,pcie-port = <1>;
|
||||
marvell,pcie-lane = <3>;
|
||||
clocks = <&gateclk 12>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@9,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
|
||||
reg = <0x4800 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
|
||||
0x81000000 0 0 0x81000000 0x9 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 99>;
|
||||
marvell,pcie-port = <2>;
|
||||
marvell,pcie-lane = <0>;
|
||||
clocks = <&gateclk 26>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie@10,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
|
||||
reg = <0x5000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
|
||||
0x81000000 0 0 0x81000000 0xa 0 1 0>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &mpic 103>;
|
||||
marvell,pcie-port = <3>;
|
||||
marvell,pcie-lane = <0>;
|
||||
clocks = <&gateclk 27>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
Loading…
Add table
Add a link
Reference in a new issue