Fixed MTP to work with TWRP

Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt

@@ -0,0 +1,88 @@
+Samsung's Multi Core Timer (MCT)
+
+The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
+global timer and CPU local timers. The global timer is a 64-bit free running
+up-counter and can generate 4 interrupts when the counter reaches one of the
+four preset counter values. The CPU local timers are 32-bit free running
+down-counters and generate an interrupt when the counter expires. There is
+one CPU local timer instantiated in MCT for every CPU in the system.
+
+Required properties:
+
+- compatible: should be "samsung,exynos4210-mct".
+  (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
+  (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
+
+- reg: base address of the mct controller and length of the address space
+  it occupies.
+
+- interrupts: the list of interrupts generated by the controller. The following
+  should be the order of the interrupts specified. The local timer interrupts
+  should be specified after the four global timer interrupts have been
+  specified.
+
+	0: Global Timer Interrupt 0
+	1: Global Timer Interrupt 1
+	2: Global Timer Interrupt 2
+	3: Global Timer Interrupt 3
+	4: Local Timer Interrupt 0
+	5: Local Timer Interrupt 1
+	6: ..
+	7: ..
+	i: Local Timer Interrupt n
+
+  For MCT block that uses a per-processor interrupt for local timers, such
+  as ones compatible with "samsung,exynos4412-mct", only one local timer
+  interrupt might be specified, meaning that all local timers use the same
+  per processor interrupt.
+
+Example 1: In this example, the IP contains two local timers, using separate
+	   interrupts, so two local timer interrupts have been specified,
+	   in addition to four global timer interrupts.
+
+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
+			     <0 42 0>, <0 48 0>;
+	};
+
+Example 2: In this example, the timer interrupts are connected to two separate
+	   interrupt controllers. Hence, an interrupt-map is created to map
+	   the interrupts to the respective interrupt controllers.
+
+	mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &gic 0 57 0>,
+					<1 &gic 0 69 0>,
+					<2 &combiner 12 6>,
+					<3 &combiner 12 7>,
+					<4 &gic 0 42 0>,
+					<5 &gic 0 48 0>;
+		};
+	};
+
+Example 3: In this example, the IP contains four local timers, but using
+	   a per-processor interrupt to handle them. Either all the local
+	   timer interrupts can be specified, with the same interrupt specifier
+	   value or just the first one.
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+
+		/* Both ways are possible in this case. Either: */
+		interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
+			     <0 42 0>;
+		/* or: */
+		interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
+			     <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>;
+	};