Fixed MTP to work with TWRP

2025-09-07 16:58:04 -04:00 · 2018-06-19 23:16:04 +02:00 · 2018-06-19 23:16:04 +02:00 · f6dfaef42e
commit f6dfaef42e
50820 changed files with 20846062 additions and 0 deletions
--- a/Documentation/devicetree/bindings/usb/exynos-usb.txt
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
@ -0,0 +1,115 @@
+Samsung Exynos SoC USB controller
+
+The USB devices interface with USB controllers on Exynos SOCs.
+The device node has following properties.
+
+EHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
+   EHCI controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
+ - port: if in the SoC there are EHCI phys, they should be listed here.
+   One phy per port. Each port should have following entries:
+	- reg: port number on EHCI controller, e.g
+	       On Exynos5250, port 0 is USB2.0 otg phy
+			      port 1 is HSIC phy0
+			      port 2 is HSIC phy1
+	- phys: from the *Generic PHY* bindings; specifying phy used by port.
+
+Optional properties:
+ - samsung,vbus-gpio:  if present, specifies the GPIO that
+   needs to be pulled up for the bus to be powered.
+
+Example:
+
+	usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+
+		clocks = <&clock 285>;
+		clock-names = "usbhost";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+		    reg = <0>;
+		    phys = <&usb2phy 1>;
+		    status = "disabled";
+		};
+	};
+
+OHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
+   OHCI companion controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
+ - port: if in the SoC there are OHCI phys, they should be listed here.
+   One phy per port. Each port should have following entries:
+	- reg: port number on OHCI controller, e.g
+	       On Exynos5250, port 0 is USB2.0 otg phy
+			      port 1 is HSIC phy0
+			      port 2 is HSIC phy1
+	- phys: from the *Generic PHY* bindings, specifying phy used by port.
+
+Example:
+	usb@12120000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12120000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock 285>;
+		clock-names = "usbhost";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+		    reg = <0>;
+		    phys = <&usb2phy 1>;
+		    status = "disabled";
+		};
+
+	};
+
+DWC3
+Required properties:
+ - compatible: should be "samsung,exynos5250-dwusb3" for USB 3.0 DWC3
+	       controller.
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+				 with 'reg' property.
+ - ranges: allows valid 1:1 translation between child's address space and
+	   parent's address space
+ - clocks: Clock IDs array as required by the controller.
+ - clock-names: names of clocks correseponding to IDs in the clock property
+
+Sub-nodes:
+The dwc3 core should be added as subnode to Exynos dwc3 glue.
+- dwc3 :
+   The binding details of dwc3 can be found in:
+   Documentation/devicetree/bindings/usb/dwc3.txt
+
+Example:
+	usb@12000000 {
+		compatible = "samsung,exynos5250-dwusb3";
+		clocks = <&clock 286>;
+		clock-names = "usbdrd30";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dwc3 {
+			compatible = "synopsys,dwc3";
+			reg = <0x12000000 0x10000>;
+			interrupts = <0 72 0>;
+			usb-phy = <&usb2_phy &usb3_phy>;
+		};
+	};