Fixed MTP to work with TWRP

Documentation/devicetree/bindings/video/adi,adv7123.txt

@@ -0,0 +1,50 @@
+Analog Device ADV7123 Video DAC
+-------------------------------
+
+The ADV7123 is a digital-to-analog converter that outputs VGA signals from a
+parallel video input.
+
+Required properties:
+
+- compatible: Should be "adi,adv7123"
+
+Optional properties:
+
+- psave-gpios: Power save control GPIO
+
+Required nodes:
+
+The ADV7123 has two video ports. Their connections are modeled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for DPI input
+- Video port 1 for VGA output
+
+
+Example
+-------
+
+	adv7123: encoder@0 {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7123_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7123_out: endpoint@0 {
+					remote-endpoint = <&vga_connector_in>;
+				};
+			};
+		};
+	};

Documentation/devicetree/bindings/video/analog-tv-connector.txt

@@ -0,0 +1,25 @@
+Analog TV Connector
+===================
+
+Required properties:
+- compatible: "composite-video-connector" or "svideo-connector"
+
+Optional properties:
+- label: a symbolic name for the connector
+
+Required nodes:
+- Video port for TV input
+
+Example
+-------
+
+tv: connector {
+	compatible = "composite-video-connector";
+	label = "tv";
+
+	port {
+		tv_connector_in: endpoint {
+			remote-endpoint = <&venc_out>;
+		};
+	};
+};

Documentation/devicetree/bindings/video/arm,pl11x.txt

@@ -0,0 +1,109 @@
+* ARM PrimeCell Color LCD Controller PL110/PL111
+
+See also Documentation/devicetree/bindings/arm/primecell.txt
+
+Required properties:
+
+- compatible: must be one of:
+	"arm,pl110", "arm,primecell"
+	"arm,pl111", "arm,primecell"
+
+- reg: base address and size of the control registers block
+
+- interrupt-names: either the single entry "combined" representing a
+	combined interrupt output (CLCDINTR), or the four entries
+	"mbe", "vcomp", "lnbu", "fuf" representing the individual
+	CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts
+
+- interrupts: contains an interrupt specifier for each entry in
+	interrupt-names
+
+- clock-names: should contain "clcdclk" and "apb_pclk"
+
+- clocks: contains phandle and clock specifier pairs for the entries
+	in the clock-names property. See
+	Documentation/devicetree/binding/clock/clock-bindings.txt
+
+Optional properties:
+
+- memory-region: phandle to a node describing memory (see
+	Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
+	to be used for the framebuffer; if not present, the framebuffer
+	may be located anywhere in the memory
+
+- max-memory-bandwidth: maximum bandwidth in bytes per second that the
+	cell's memory interface can handle; if not present, the memory
+	interface is fast enough to handle all possible video modes
+
+Required sub-nodes:
+
+- port: describes LCD panel signals, following the common binding
+	for video transmitter interfaces; see
+	Documentation/devicetree/bindings/media/video-interfaces.txt;
+	when it is a TFT panel, the port's endpoint must define the
+	following property:
+
+	- arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values,
+		defining the way CLD pads are wired up; first value
+		contains index of the "CLD" external pin (pad) used
+		as R0 (first bit of the red component), second value
+	        index of the pad used as G0, third value index of the
+		pad used as B0, see also "LCD panel signal multiplexing
+		details" paragraphs in the PL110/PL111 Technical
+		Reference Manuals; this implicitly defines available
+		color modes, for example:
+		- PL111 TFT 4:4:4 panel:
+			arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
+		- PL110 TFT (1:)5:5:5 panel:
+			arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+		- PL111 TFT (1:)5:5:5 panel:
+			arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
+		- PL111 TFT 5:6:5 panel:
+			arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
+		- PL110 and PL111 TFT 8:8:8 panel:
+			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+		- PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
+			arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+
+
+Example:
+
+	clcd@10020000 {
+		compatible = "arm,pl111", "arm,primecell";
+		reg = <0x10020000 0x1000>;
+		interrupt-names = "combined";
+		interrupts = <0 44 4>;
+		clocks = <&oscclk1>, <&oscclk2>;
+		clock-names = "clcdclk", "apb_pclk";
+		max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
+
+		port {
+			clcd_pads: endpoint {
+				remote-endpoint = <&clcd_panel>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+
+	};
+
+	panel {
+		compatible = "panel-dpi";
+
+		port {
+			clcd_panel: endpoint {
+				remote-endpoint = <&clcd_pads>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <25175000>;
+			hactive = <640>;
+			hback-porch = <40>;
+			hfront-porch = <24>;
+			hsync-len = <96>;
+			vactive = <480>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <2>;
+		};
+	};

Documentation/devicetree/bindings/video/atmel,lcdc.txt

@@ -0,0 +1,79 @@
+Atmel LCDC Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible :
+	"atmel,at91sam9261-lcdc" , 
+	"atmel,at91sam9263-lcdc" ,
+	"atmel,at91sam9g10-lcdc" ,
+	"atmel,at91sam9g45-lcdc" ,
+	"atmel,at91sam9g45es-lcdc" ,
+	"atmel,at91sam9rl-lcdc" ,
+	"atmel,at32ap-lcdc"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : framebuffer controller interrupt
+- display: a phandle pointing to the display node
+
+Required nodes:
+- display: a display node is required to initialize the lcd panel
+	This should be in the board dts.
+- default-mode: a videomode within the display with timing parameters
+	as specified below.
+
+Optional properties:
+- lcd-supply: Regulator for LCD supply voltage.
+
+Example:
+
+	fb0: fb@0x00500000 {
+		compatible = "atmel,at91sam9g45-lcdc";
+		reg = <0x00500000 0x1000>;
+		interrupts = <23 3 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fb>;
+		display = <&display0>;
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+	};
+
+Atmel LCDC Display
+-----------------------------------------------------
+Required properties (as per of_videomode_helper):
+
+ - atmel,dmacon: dma controller configuration
+ - atmel,lcdcon2: lcd controller configuration
+ - atmel,guard-time: lcd guard time (Delay in frame periods)
+ - bits-per-pixel: lcd panel bit-depth.
+
+Optional properties (as per of_videomode_helper):
+ - atmel,lcdcon-backlight: enable backlight
+ - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity
+ - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG"
+ - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
+
+Example:
+	display0: display {
+		bits-per-pixel = <32>;
+		atmel,lcdcon-backlight;
+		atmel,dmacon = <0x1>;
+		atmel,lcdcon2 = <0x80008002>;
+		atmel,guard-time = <9>;
+		atmel,lcd-wiring-mode = <1>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <1>;
+				hfront-porch = <1>;
+				vback-porch = <40>;
+				vfront-porch = <1>;
+				hsync-len = <45>;
+				vsync-len = <1>;
+			};
+		};
+	};

Documentation/devicetree/bindings/video/backlight/88pm860x.txt

@@ -0,0 +1,15 @@
+88pm860x-backlight bindings
+
+Optional properties:
+  - marvell,88pm860x-iset: Current supplies on backlight device.
+  - marvell,88pm860x-pwm: PWM frequency on backlight device.
+
+Example:
+
+	backlights {
+		backlight-0 {
+			marvell,88pm860x-iset = <4>;
+			marvell,88pm860x-pwm = <3>;
+		};
+		backlight-2 {
+		};

Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt

@@ -0,0 +1,16 @@
+gpio-backlight bindings
+
+Required properties:
+  - compatible: "gpio-backlight"
+  - gpios: describes the gpio that is used for enabling/disabling the backlight.
+    refer to bindings/gpio/gpio.txt for more details.
+
+Optional properties:
+  - default-on: enable the backlight at boot.
+
+Example:
+	backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};

Documentation/devicetree/bindings/video/backlight/lp855x.txt

@@ -0,0 +1,68 @@
+lp855x bindings
+
+Required properties:
+  - compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553",
+                "ti,lp8555", "ti,lp8556", "ti,lp8557"
+  - reg: I2C slave address (u8)
+  - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device.
+
+Optional properties:
+  - bl-name: Backlight device name (string)
+  - init-brt: Initial value of backlight brightness (u8)
+  - pwm-period: PWM period value. Set only PWM input mode used (u32)
+  - rom-addr: Register address of ROM area to be updated (u8)
+  - rom-val: Register value to be updated (u8)
+
+Example:
+
+	/* LP8555 */
+	backlight@2c {
+		compatible = "ti,lp8555";
+		reg = <0x2c>;
+
+		dev-ctrl = /bits/ 8 <0x00>;
+		pwm-period = <10000>;
+
+		/* 4V OV, 4 output LED0 string enabled */
+		rom_14h {
+			rom-addr = /bits/ 8 <0x14>;
+			rom-val = /bits/ 8 <0xcf>;
+		};
+
+		/* Heavy smoothing, 24ms ramp time step */
+		rom_15h {
+			rom-addr = /bits/ 8 <0x15>;
+			rom-val = /bits/ 8 <0xc7>;
+		};
+
+		/* 4 output LED1 string enabled */
+		rom_19h {
+			rom-addr = /bits/ 8 <0x19>;
+			rom-val = /bits/ 8 <0x0f>;
+		};
+	};
+
+	/* LP8556 */
+	backlight@2c {
+		compatible = "ti,lp8556";
+		reg = <0x2c>;
+
+		bl-name = "lcd-bl";
+		dev-ctrl = /bits/ 8 <0x85>;
+		init-brt = /bits/ 8 <0x10>;
+	};
+
+	/* LP8557 */
+	backlight@2c {
+		compatible = "ti,lp8557";
+		reg = <0x2c>;
+
+		dev-ctrl = /bits/ 8 <0x41>;
+		init-brt = /bits/ 8 <0x0a>;
+
+		/* 4V OV, 4 output LED string enabled */
+		rom_14h {
+			rom-addr = /bits/ 8 <0x14>;
+			rom-val = /bits/ 8 <0xcf>;
+		};
+	};

Documentation/devicetree/bindings/video/backlight/max8925-backlight.txt

@@ -0,0 +1,10 @@
+88pm860x-backlight bindings
+
+Optional properties:
+  - maxim,max8925-dual-string: whether support dual string
+
+Example:
+
+	backlights {
+		maxim,max8925-dual-string = <0>;
+	};

Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt

@@ -0,0 +1,35 @@
+pwm-backlight bindings
+
+Required properties:
+  - compatible: "pwm-backlight"
+  - pwms: OF device-tree PWM specification (see PWM binding[0])
+  - brightness-levels: Array of distinct brightness levels. Typically these
+      are in the range from 0 to 255, but any range starting at 0 will do.
+      The actual brightness level (PWM duty cycle) will be interpolated
+      from these values. 0 means a 0% duty cycle (darkest/off), while the
+      last value in the array represents a 100% duty cycle (brightest).
+  - default-brightness-level: the default brightness level (index into the
+      array defined by the "brightness-levels" property)
+  - power-supply: regulator for supply voltage
+
+Optional properties:
+  - pwm-names: a list of names for the PWM devices specified in the
+               "pwms" property (see PWM binding[0])
+  - enable-gpios: contains a single GPIO specifier for the GPIO which enables
+                  and disables the backlight (see GPIO binding[1])
+
+[0]: Documentation/devicetree/bindings/pwm/pwm.txt
+[1]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&vdd_bl_reg>;
+		enable-gpios = <&gpio 58 0>;
+	};

Documentation/devicetree/bindings/video/backlight/tps65217-backlight.txt

@@ -0,0 +1,27 @@
+TPS65217 family of regulators
+
+The TPS65217 chip contains a boost converter and current sinks which can be
+used to drive LEDs for use as backlights.
+
+Required properties:
+- compatible: "ti,tps65217"
+- reg: I2C slave address
+- backlight: node for specifying WLED1 and WLED2 lines in TPS65217
+- isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level)
+- fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000
+- default-brightness: valid values: 0-100
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	tps: tps@24 {
+		reg = <0x24>;
+		compatible = "ti,tps65217";
+		backlight {
+			isel = <1>;  /* 1 - ISET1, 2 ISET2 */
+			fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
+			default-brightness = <50>;
+		};
+	};
+

Documentation/devicetree/bindings/video/cirrus,clps711x-fb.txt

@@ -0,0 +1,47 @@
+* Currus Logic CLPS711X Framebuffer
+
+Required properties:
+- compatible: Shall contain "cirrus,clps711x-fb".
+- reg       : Physical base address and length of the controller's registers +
+              location and size of the framebuffer memory.
+- clocks    : phandle + clock specifier pair of the FB reference clock.
+- display   : phandle to a display node as described in
+              Documentation/devicetree/bindings/video/display-timing.txt.
+              Additionally, the display node has to define properties:
+  - bits-per-pixel: Bits per pixel.
+  - ac-prescale   : LCD AC bias frequency. This frequency is the required
+                    AC bias frequency for a given manufacturer's LCD plate.
+  - cmap-invert   : Invert the color levels (Optional).
+
+Optional properties:
+- lcd-supply: Regulator for LCD supply voltage.
+
+Example:
+	fb: fb@800002c0 {
+		compatible = "cirrus,ep7312-fb", "cirrus,clps711x-fb";
+		reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
+		clocks = <&clks 2>;
+		lcd-supply = <&reg5v0>;
+		display = <&display>;
+	};
+
+	display: display {
+		model = "320x240x4";
+		native-mode = <&timing0>;
+		bits-per-pixel = <4>;
+		ac-prescale = <17>;
+
+		display-timings {
+			timing0: 320x240 {
+				hactive = <320>;
+				hback-porch = <0>;
+				hfront-porch = <0>;
+				hsync-len = <0>;
+				vactive = <240>;
+				vback-porch = <0>;
+				vfront-porch = <0>;
+				vsync-len = <0>;
+				clock-frequency = <6500000>;
+			};
+		};
+	};

Documentation/devicetree/bindings/video/display-timing.txt

@@ -0,0 +1,110 @@
+display-timing bindings
+=======================
+
+display-timings node
+--------------------
+
+required properties:
+ - none
+
+optional properties:
+ - native-mode: The native mode for the display, in case multiple modes are
+		provided. When omitted, assume the first node is the native.
+
+timing subnode
+--------------
+
+required properties:
+ - hactive, vactive: display resolution
+ - hfront-porch, hback-porch, hsync-len: horizontal display timing parameters
+   in pixels
+   vfront-porch, vback-porch, vsync-len: vertical display timing parameters in
+   lines
+ - clock-frequency: display clock in Hz
+
+optional properties:
+ - hsync-active: hsync pulse is active low/high/ignored
+ - vsync-active: vsync pulse is active low/high/ignored
+ - de-active: data-enable pulse is active low/high/ignored
+ - pixelclk-active: with
+			- active high = drive pixel data on rising edge/
+					sample data on falling edge
+			- active low  = drive pixel data on falling edge/
+					sample data on rising edge
+			- ignored     = ignored
+ - interlaced (bool): boolean to enable interlaced mode
+ - doublescan (bool): boolean to enable doublescan mode
+ - doubleclk (bool): boolean to enable doubleclock mode
+
+All the optional properties that are not bool follow the following logic:
+    <1>: high active
+    <0>: low active
+    omitted: not used on hardware
+
+There are different ways of describing the capabilities of a display. The
+devicetree representation corresponds to the one commonly found in datasheets
+for displays. If a display supports multiple signal timings, the native-mode
+can be specified.
+
+The parameters are defined as:
+
+  +----------+-------------------------------------+----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vback_porch                 |          |       |
+  |          |        ↓                            |          |       |
+  +----------#######################################----------+-------+
+  |          #        ↑                            #          |       |
+  |          #        |                            #          |       |
+  |  hback   #        |                            #  hfront  | hsync |
+  |   porch  #        |       hactive              #  porch   |  len  |
+  |<-------->#<-------+--------------------------->#<-------->|<----->|
+  |          #        |                            #          |       |
+  |          #        |vactive                     #          |       |
+  |          #        |                            #          |       |
+  |          #        ↓                            #          |       |
+  +----------#######################################----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vfront_porch                |          |       |
+  |          |        ↓                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vsync_len                   |          |       |
+  |          |        ↓                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+
+Example:
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 1080p24 {
+			/* 1920x1080p24 */
+			clock-frequency = <52000000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hfront-porch = <25>;
+			hback-porch = <25>;
+			hsync-len = <25>;
+			vback-porch = <2>;
+			vfront-porch = <2>;
+			vsync-len = <2>;
+			hsync-active = <1>;
+		};
+	};
+
+Every required property also supports the use of ranges, so the commonly used
+datasheet description with minimum, typical and maximum values can be used.
+
+Example:
+
+	timing1: timing {
+		/* 1920x1080p24 */
+		clock-frequency = <148500000>;
+		hactive = <1920>;
+		vactive = <1080>;
+		hsync-len = <0 44 60>;
+		hfront-porch = <80 88 95>;
+		hback-porch = <100 148 160>;
+		vfront-porch = <0 4 6>;
+		vback-porch = <0 36 50>;
+		vsync-len = <0 5 6>;
+	};

Documentation/devicetree/bindings/video/dvi-connector.txt

@@ -0,0 +1,35 @@
+DVI Connector
+==============
+
+Required properties:
+- compatible: "dvi-connector"
+
+Optional properties:
+- label: a symbolic name for the connector
+- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC
+- analog: the connector has DVI analog pins
+- digital: the connector has DVI digital pins
+- dual-link: the connector has pins for DVI dual-link
+
+Required nodes:
+- Video port for DVI input
+
+Note: One (or both) of 'analog' or 'digital' must be set.
+
+Example
+-------
+
+dvi0: connector@0 {
+	compatible = "dvi-connector";
+	label = "dvi";
+
+	digital;
+
+	ddc-i2c-bus = <&i2c3>;
+
+	port {
+		dvi_connector_in: endpoint {
+			remote-endpoint = <&tfp410_out>;
+		};
+	};
+};

Documentation/devicetree/bindings/video/exynos_dp.txt

@@ -0,0 +1,108 @@
+The Exynos display port interface should be configured based on
+the type of panel connected to it.
+
+We use two nodes:
+	-dp-controller node
+	-dptx-phy node(defined inside dp-controller node)
+
+For the DP-PHY initialization, we use the dptx-phy node.
+Required properties for dptx-phy: deprecated, use phys and phy-names
+	-reg: deprecated
+		Base address of DP PHY register.
+	-samsung,enable-mask: deprecated
+		The bit-mask used to enable/disable DP PHY.
+
+For the Panel initialization, we read data from dp-controller node.
+Required properties for dp-controller:
+	-compatible:
+		should be "samsung,exynos5-dp".
+	-reg:
+		physical base address of the controller and length
+		of memory mapped region.
+	-interrupts:
+		interrupt combiner values.
+	-clocks:
+		from common clock binding: handle to dp clock.
+	-clock-names:
+		from common clock binding: Shall be "dp".
+	-interrupt-parent:
+		phandle to Interrupt combiner node.
+	-phys:
+		from general PHY binding: the phandle for the PHY device.
+	-phy-names:
+		from general PHY binding: Should be "dp".
+	-samsung,color-space:
+		input video data format.
+			COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
+	-samsung,dynamic-range:
+		dynamic range for input video data.
+			VESA = 0, CEA = 1
+	-samsung,ycbcr-coeff:
+		YCbCr co-efficients for input video.
+			COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
+	-samsung,color-depth:
+		number of bits per colour component.
+			COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
+	-samsung,link-rate:
+		link rate supported by the panel.
+			LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
+	-samsung,lane-count:
+		number of lanes supported by the panel.
+			LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
+	- display-timings: timings for the connected panel as described by
+		Documentation/devicetree/bindings/video/display-timing.txt
+
+Optional properties for dp-controller:
+	-interlaced:
+		interlace scan mode.
+			Progressive if defined, Interlaced if not defined
+	-vsync-active-high:
+		VSYNC polarity configuration.
+			High if defined, Low if not defined
+	-hsync-active-high:
+		HSYNC polarity configuration.
+			High if defined, Low if not defined
+	-samsung,hpd-gpio:
+		Hotplug detect GPIO.
+			Indicates which GPIO should be used for hotplug
+			detection
+
+Example:
+
+SOC specific portion:
+	dp-controller {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145b0000 0x10000>;
+		interrupts = <10 3>;
+		interrupt-parent = <&combiner>;
+		clocks = <&clock 342>;
+		clock-names = "dp";
+
+		phys = <&dp_phy>;
+		phy-names = "dp";
+	};
+
+Board Specific portion:
+	dp-controller {
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,link-rate = <0x0a>;
+		samsung,lane-count = <4>;
+
+		display-timings {
+			native-mode = <&lcd_timing>;
+			lcd_timing: 1366x768 {
+				clock-frequency = <70589280>;
+				hactive = <1366>;
+				vactive = <768>;
+				hfront-porch = <40>;
+				hback-porch = <40>;
+				hsync-len = <32>;
+				vback-porch = <10>;
+				vfront-porch = <12>;
+				vsync-len = <6>;
+			};
+		};
+	};

Documentation/devicetree/bindings/video/exynos_dsim.txt

@@ -0,0 +1,83 @@
+Exynos MIPI DSI Master
+
+Required properties:
+  - compatible: value should be one of the following
+		"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
+		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
+		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
+  - reg: physical base address and length of the registers set for the device
+  - interrupts: should contain DSI interrupt
+  - clocks: list of clock specifiers, must contain an entry for each required
+    entry in clock-names
+  - clock-names: should include "bus_clk"and "pll_clk" entries
+  - phys: list of phy specifiers, must contain an entry for each required
+    entry in phy-names
+  - phy-names: should include "dsim" entry
+  - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
+  - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
+  - samsung,pll-clock-frequency: specifies frequency of the "pll_clk" clock
+  - #address-cells, #size-cells: should be set respectively to <1> and <0>
+    according to DSI host bindings (see MIPI DSI bindings [1])
+
+Optional properties:
+  - samsung,power-domain: a phandle to DSIM power domain node
+
+Child nodes:
+  Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
+
+Video interfaces:
+  Device node can contain video interface port nodes according to [2].
+  The following are properties specific to those nodes:
+
+  port node:
+    - reg: (required) can be 0 for input RGB/I80 port or 1 for DSI port;
+
+  endpoint node of DSI port (reg = 1):
+    - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
+      mode
+    - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
+
+[1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+	dsi@11C80000 {
+		compatible = "samsung,exynos4210-mipi-dsi";
+		reg = <0x11C80000 0x10000>;
+		interrupts = <0 79 0>;
+		clocks = <&clock 286>, <&clock 143>;
+		clock-names = "bus_clk", "pll_clk";
+		phys = <&mipi_phy 1>;
+		phy-names = "dsim";
+		vddcore-supply = <&vusb_reg>;
+		vddio-supply = <&vmipi_reg>;
+		samsung,power-domain = <&pd_lcd0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		samsung,pll-clock-frequency = <24000000>;
+
+		panel@1 {
+			reg = <0>;
+			...
+			port {
+				panel_ep: endpoint {
+					remote-endpoint = <&dsi_ep>;
+				};
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				dsi_ep: endpoint {
+					reg = <0>;
+					samsung,burst-clock-frequency = <500000000>;
+					samsung,esc-clock-frequency = <20000000>;
+					remote-endpoint = <&panel_ep>;
+				};
+			};
+		};
+	};

Documentation/devicetree/bindings/video/exynos_hdmi.txt

@@ -0,0 +1,43 @@
+Device-Tree bindings for drm hdmi driver
+
+Required properties:
+- compatible: value should be one among the following:
+	1) "samsung,exynos5-hdmi" <DEPRECATED>
+	2) "samsung,exynos4210-hdmi"
+	3) "samsung,exynos4212-hdmi"
+	4) "samsung,exynos5420-hdmi"
+- reg: physical base address of the hdmi and length of memory mapped
+	region.
+- interrupts: interrupt number to the cpu.
+- hpd-gpio: following information about the hotplug gpio pin.
+	a) phandle of the gpio controller node.
+	b) pin number within the gpio controller.
+	c) optional flags and pull up/down.
+- clocks: list of clock IDs from SoC clock driver.
+	a) hdmi: Gate of HDMI IP bus clock.
+	b) sclk_hdmi: Gate of HDMI special clock.
+	c) sclk_pixel: Pixel special clock, one of the two possible inputs of
+		HDMI clock mux.
+	d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
+		HDMI clock mux.
+	e) mout_hdmi: It is required by the driver to switch between the 2
+		parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
+		after configuration, parent is set to sclk_hdmiphy else
+		sclk_pixel.
+- clock-names: aliases as per driver requirements for above clock IDs:
+	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
+- ddc: phandle to the hdmi ddc node
+- phy: phandle to the hdmi phy node
+- samsung,syscon-phandle: phandle for system controller node for PMU.
+
+Example:
+
+	hdmi {
+		compatible = "samsung,exynos4212-hdmi";
+		reg = <0x14530000 0x100000>;
+		interrupts = <0 95 0>;
+		hpd-gpio = <&gpx3 7 1>;
+		ddc = <&hdmi_ddc_node>;
+		phy = <&hdmi_phy_node>;
+		samsung,syscon-phandle = <&pmu_system_controller>;
+	};

Documentation/devicetree/bindings/video/exynos_hdmiddc.txt

@@ -0,0 +1,15 @@
+Device-Tree bindings for hdmiddc driver
+
+Required properties:
+- compatible: value should be one of the following
+	1) "samsung,exynos5-hdmiddc" <DEPRECATED>
+	2) "samsung,exynos4210-hdmiddc"
+
+- reg: I2C address of the hdmiddc device.
+
+Example:
+
+	hdmiddc {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};

Documentation/devicetree/bindings/video/exynos_hdmiphy.txt

@@ -0,0 +1,15 @@
+Device-Tree bindings for hdmiphy driver
+
+Required properties:
+- compatible: value should be one of the following:
+	1) "samsung,exynos5-hdmiphy" <DEPRECATED>
+	2) "samsung,exynos4210-hdmiphy".
+	3) "samsung,exynos4212-hdmiphy".
+- reg: I2C address of the hdmiphy device.
+
+Example:
+
+	hdmiphy {
+		compatible = "samsung,exynos4210-hdmiphy";
+		reg = <0x38>;
+	};

Documentation/devicetree/bindings/video/exynos_mixer.txt

@@ -0,0 +1,25 @@
+Device-Tree bindings for mixer driver
+
+Required properties:
+- compatible: value should be one of the following:
+	1) "samsung,exynos5-mixer" <DEPRECATED>
+	2) "samsung,exynos4210-mixer"
+	3) "samsung,exynos4212-mixer"
+	4) "samsung,exynos5250-mixer"
+	5) "samsung,exynos5420-mixer"
+
+- reg: physical base address of the mixer and length of memory mapped
+	region.
+- interrupts: interrupt number to the cpu.
+- clocks: list of clock IDs from SoC clock driver.
+	a) mixer: Gate of Mixer IP bus clock.
+	b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
+               mixer mux.
+
+Example:
+
+	mixer {
+		compatible = "samsung,exynos5250-mixer";
+		reg = <0x14450000 0x10000>;
+		interrupts = <0 94 0>;
+	};

Documentation/devicetree/bindings/video/fsl,imx-fb.txt

@@ -0,0 +1,55 @@
+Freescale imx21 Framebuffer
+
+This framebuffer driver supports devices imx1, imx21, imx25, and imx27.
+
+Required properties:
+- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : One interrupt of the fb dev
+
+Required nodes:
+- display: Phandle to a display node as described in
+	Documentation/devicetree/bindings/video/display-timing.txt
+	Additional, the display node has to define properties:
+	- bits-per-pixel: Bits per pixel
+	- fsl,pcr: LCDC PCR value
+
+Optional properties:
+- lcd-supply: Regulator for LCD supply voltage.
+- fsl,dmacr: DMA Control Register value. This is optional. By default, the
+	register is not modified as recommended by the datasheet.
+- fsl,lpccr: Contrast Control Register value. This property provides the
+	default value for the contrast control register.
+	If that property is omitted, the register is zeroed.
+- fsl,lscr1: LCDC Sharp Configuration Register value.
+
+Example:
+
+	imxfb: fb@10021000 {
+		compatible = "fsl,imx21-fb";
+		interrupts = <61>;
+		reg = <0x10021000 0x1000>;
+		display = <&display0>;
+	};
+
+	...
+
+	display0: display0 {
+		model = "Primeview-PD050VL1";
+		native-mode = <&timing_disp0>;
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
+		display-timings {
+			timing_disp0: 640x480 {
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <112>;
+				hfront-porch = <36>;
+				hsync-len = <32>;
+				vback-porch = <33>;
+				vfront-porch = <33>;
+				vsync-len = <2>;
+				clock-frequency = <25000000>;
+			};
+		};
+	};

Documentation/devicetree/bindings/video/hdmi-connector.txt

@@ -0,0 +1,29 @@
+HDMI Connector
+==============
+
+Required properties:
+- compatible: "hdmi-connector"
+- type: the HDMI connector type: "a", "b", "c", "d" or "e"
+
+Optional properties:
+- label: a symbolic name for the connector
+- hpd-gpios: HPD GPIO number
+
+Required nodes:
+- Video port for HDMI input
+
+Example
+-------
+
+hdmi0: connector@1 {
+	compatible = "hdmi-connector";
+	label = "hdmi";
+
+	type = "a";
+
+	port {
+		hdmi_connector_in: endpoint {
+			remote-endpoint = <&tpd12s015_out>;
+		};
+	};
+};

Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt

@@ -0,0 +1,33 @@
+LG.Philips LB035Q02 Panel
+=========================
+
+Required properties:
+- compatible: "lgphilips,lb035q02"
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: panel@0 {
+	compatible = "lgphilips,lb035q02";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+
+	enable-gpios = <&gpio7 7 0>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};

Documentation/devicetree/bindings/video/panel-dpi.txt

@@ -0,0 +1,45 @@
+Generic MIPI DPI Panel
+======================
+
+Required properties:
+- compatible: "panel-dpi"
+
+Optional properties:
+- label: a symbolic name for the panel
+- enable-gpios: panel enable gpio
+
+Required nodes:
+- "panel-timing" containing video timings
+  (Documentation/devicetree/bindings/video/display-timing.txt)
+- Video port for DPI input
+
+Example
+-------
+
+lcd0: display@0 {
+        compatible = "samsung,lte430wq-f0c", "panel-dpi";
+        label = "lcd";
+
+        port {
+            lcd_in: endpoint {
+                    remote-endpoint = <&dpi_out>;
+            };
+        };
+
+        panel-timing {
+                clock-frequency = <9200000>;
+                hactive = <480>;
+                vactive = <272>;
+                hfront-porch = <8>;
+                hback-porch = <4>;
+                hsync-len = <41>;
+                vback-porch = <2>;
+                vfront-porch = <4>;
+                vsync-len = <10>;
+
+                hsync-active = <0>;
+                vsync-active = <0>;
+                de-active = <1>;
+                pixelclk-active = <1>;
+        };
+};

Documentation/devicetree/bindings/video/panel-dsi-cm.txt

@@ -0,0 +1,29 @@
+Generic MIPI DSI Command Mode Panel
+===================================
+
+Required properties:
+- compatible: "panel-dsi-cm"
+
+Optional properties:
+- label: a symbolic name for the panel
+- reset-gpios: panel reset gpio
+- te-gpios: panel TE gpio
+
+Required nodes:
+- Video port for DSI input
+
+Example
+-------
+
+lcd0: display {
+	compatible = "tpo,taal", "panel-dsi-cm";
+	label = "lcd0";
+
+	reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd0_in: endpoint {
+			remote-endpoint = <&dsi1_out_ep>;
+		};
+	};
+};

Documentation/devicetree/bindings/video/renesas,du.txt

@@ -0,0 +1,84 @@
+* Renesas R-Car Display Unit (DU)
+
+Required Properties:
+
+  - compatible: must be one of the following.
+    - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
+    - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
+    - "renesas,du-r8a7791" for R8A7791 (R-Car M2) compatible DU
+
+  - reg: A list of base address and length of each memory resource, one for
+    each entry in the reg-names property.
+  - reg-names: Name of the memory resources. The DU requires one memory
+    resource for the DU core (named "du") and one memory resource for each
+    LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
+    index).
+
+  - interrupt-parent: phandle of the parent interrupt controller.
+  - interrupts: Interrupt specifiers for the DU interrupts.
+
+  - clocks: A list of phandles + clock-specifier pairs, one for each entry in
+    the clock-names property.
+  - clock-names: Name of the clocks. This property is model-dependent.
+    - R8A7779 uses a single functional clock. The clock doesn't need to be
+      named.
+    - R8A7790 and R8A7791 use one functional clock per channel and one clock
+      per LVDS encoder. The functional clocks must be named "du.x" with "x"
+      being the channel numerical index. The LVDS clocks must be named
+      "lvds.x" with "x" being the LVDS encoder numerical index.
+
+Required nodes:
+
+The connections to the DU output video ports are modeled using the OF graph
+bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+The following table lists for each supported model the port number
+corresponding to each DU output.
+
+		Port 0		Port1		Port2
+-----------------------------------------------------------------------------
+ R8A7779 (H1)	DPAD 0		DPAD 1		-
+ R8A7790 (H2)	DPAD		LVDS 0		LVDS 1
+ R8A7791 (M2)	DPAD		LVDS 0		-
+
+
+Example: R8A7790 (R-Car H2) DU
+
+	du: du@feb00000 {
+		compatible = "renesas,du-r8a7790";
+		reg = <0 0xfeb00000 0 0x70000>,
+		      <0 0xfeb90000 0 0x1c>,
+		      <0 0xfeb94000 0 0x1c>;
+		reg-names = "du", "lvds.0", "lvds.1";
+		interrupt-parent = <&gic>;
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
+		         <&mstp7_clks R8A7790_CLK_DU1>,
+		         <&mstp7_clks R8A7790_CLK_DU2>,
+		         <&mstp7_clks R8A7790_CLK_LVDS0>,
+		         <&mstp7_clks R8A7790_CLK_LVDS1>;
+		clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_lvds0: endpoint {
+				};
+			};
+			port@2 {
+				reg = <2>;
+				du_out_lvds1: endpoint {
+				};
+			};
+		};
+	};

Documentation/devicetree/bindings/video/samsung-fimd.txt

@@ -0,0 +1,109 @@
+Device-Tree bindings for Samsung SoC display controller (FIMD)
+
+FIMD (Fully Interactive Mobile Display) is the Display Controller for the
+Samsung series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be one of the following
+		"samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
+		"samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
+		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
+		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
+		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
+		"samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
+
+- reg: physical base address and length of the FIMD registers set.
+
+- interrupt-parent: should be the phandle of the fimd controller's
+		parent interrupt controller.
+
+- interrupts: should contain a list of all FIMD IP block interrupts in the
+		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
+		 format depends on the interrupt controller used.
+
+- interrupt-names: should contain the interrupt names: "fifo", "vsync",
+	"lcd_sys", in the same order as they were listed in the interrupts
+        property.
+
+- pinctrl-0: pin control group to be used for this controller.
+
+- pinctrl-names: must contain a "default" entry.
+
+- clocks: must include clock specifiers corresponding to entries in the
+         clock-names property.
+
+- clock-names: list of clock names sorted in the same order as the clocks
+               property. Must contain "sclk_fimd" and "fimd".
+
+Optional Properties:
+- samsung,power-domain: a phandle to FIMD power domain node.
+- samsung,invert-vden: video enable signal is inverted
+- samsung,invert-vclk: video clock signal is inverted
+- display-timings: timing settings for FIMD, as described in document [1].
+		Can be used in case timings cannot be provided otherwise
+		or to override timings provided by the panel.
+- samsung,sysreg: handle to syscon used to control the system registers
+- i80-if-timings: timing configuration for lcd i80 interface support.
+  - cs-setup: clock cycles for the active period of address signal is enabled
+              until chip select is enabled.
+              If not specified, the default value(0) will be used.
+  - wr-setup: clock cycles for the active period of CS signal is enabled until
+              write signal is enabled.
+              If not specified, the default value(0) will be used.
+  - wr-active: clock cycles for the active period of CS is enabled.
+               If not specified, the default value(1) will be used.
+  - wr-hold: clock cycles for the active period of CS is disabled until write
+             signal is disabled.
+             If not specified, the default value(0) will be used.
+
+  The parameters are defined as:
+
+    VCLK(internal)  __|??????|_____|??????|_____|??????|_____|??????|_____|??
+                      :            :            :            :            :
+    Address Output  --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
+                      | cs-setup+1 |            :            :            :
+                      |<---------->|            :            :            :
+    Chip Select     ???????????????|____________:____________:____________|??
+                                   | wr-setup+1 |            | wr-hold+1  |
+                                   |<---------->|            |<---------->|
+    Write Enable    ????????????????????????????|____________|???????????????
+                                                | wr-active+1|
+                                                |<---------->|
+    Video Data      ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
+
+The device node can contain 'port' child nodes according to the bindings defined
+in [2]. The following are properties specific to those nodes:
+- reg: (required) port index, can be:
+		0 - for CAMIF0 input,
+		1 - for CAMIF1 input,
+		2 - for CAMIF2 input,
+		3 - for parallel output,
+		4 - for write-back interface
+
+[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+SoC specific DT entry:
+
+	fimd@11c00000 {
+		compatible = "samsung,exynos4210-fimd";
+		interrupt-parent = <&combiner>;
+		reg = <0x11c00000 0x20000>;
+		interrupt-names = "fifo", "vsync", "lcd_sys";
+		interrupts = <11 0>, <11 1>, <11 2>;
+		clocks = <&clock 140>, <&clock 283>;
+		clock-names = "sclk_fimd", "fimd";
+		samsung,power-domain = <&pd_lcd0>;
+		status = "disabled";
+	};
+
+Board specific DT entry:
+
+	fimd@11c00000 {
+		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+		pinctrl-names = "default";
+		status = "okay";
+	};

Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt

@@ -0,0 +1,43 @@
+SHARP LS037V7DW01 TFT-LCD panel
+===================================
+
+Required properties:
+- compatible: "sharp,ls037v7dw01"
+
+Optional properties:
+- label: a symbolic name for the panel
+- enable-gpios: a GPIO spec for the optional enable pin.
+  This pin is the INI pin as specified in the LS037V7DW01.pdf file.
+- reset-gpios: a GPIO spec for the optional reset pin.
+  This pin is the RESB pin as specified in the LS037V7DW01.pdf file.
+- mode-gpios: a GPIO
+  ordered MO, LR, and UD as specified in the LS037V7DW01.pdf file.
+
+Required nodes:
+- Video port for DPI input
+
+This panel can have zero to five GPIOs to configure to change configuration
+between QVGA and VGA mode and the scan direction. As these pins can be also
+configured with external pulls, all the GPIOs are considered optional with holes
+in the array.
+
+Example
+-------
+
+Example when connected to a omap2+ based device:
+
+lcd0: display {
+	compatible = "sharp,ls037v7dw01";
+	power-supply = <&lcd_3v3>;
+	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
+	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
+	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
+		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
+		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};

Documentation/devicetree/bindings/video/simple-framebuffer.txt

@@ -0,0 +1,26 @@
+Simple Framebuffer
+
+A simple frame-buffer describes a raw memory region that may be rendered to,
+with the assumption that the display hardware has already been set up to scan
+out from that buffer.
+
+Required properties:
+- compatible: "simple-framebuffer"
+- reg: Should contain the location and size of the framebuffer memory.
+- width: The width of the framebuffer in pixels.
+- height: The height of the framebuffer in pixels.
+- stride: The number of bytes in each line of the framebuffer.
+- format: The format of the framebuffer surface. Valid values are:
+  - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
+  - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
+
+Example:
+
+	framebuffer {
+		compatible = "simple-framebuffer";
+		reg = <0x1d385000 (1600 * 1200 * 2)>;
+		width = <1600>;
+		height = <1200>;
+		stride = <(1600 * 2)>;
+		format = "r5g6b5";
+	};

Documentation/devicetree/bindings/video/sony,acx565akm.txt

@@ -0,0 +1,30 @@
+Sony ACX565AKM SDI Panel
+========================
+
+Required properties:
+- compatible: "sony,acx565akm"
+
+Optional properties:
+- label: a symbolic name for the panel
+- reset-gpios: panel reset gpio
+
+Required nodes:
+- Video port for SDI input
+
+Example
+-------
+
+acx565akm@2 {
+	compatible = "sony,acx565akm";
+	spi-max-frequency = <6000000>;
+	reg = <2>;
+
+	label = "lcd";
+	reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&sdi_out>;
+		};
+	};
+};

Documentation/devicetree/bindings/video/ssd1289fb.txt

@@ -0,0 +1,13 @@
+* Solomon SSD1289 Framebuffer Driver
+
+Required properties:
+  - compatible: Should be "solomon,ssd1289fb". The only supported bus for
+    now is lbc.
+  - reg: Should contain address of the controller on the LBC bus. The detail
+    was described in Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
+
+Examples:
+display@2,0 {
+	compatible = "solomon,ssd1289fb";
+	reg = <0x2 0x0000 0x0004>;
+};

Documentation/devicetree/bindings/video/ssd1307fb.txt

@@ -0,0 +1,28 @@
+* Solomon SSD1307 Framebuffer Driver
+
+Required properties:
+  - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for
+    now is i2c, and the supported chips are ssd1306 and ssd1307.
+  - reg: Should contain address of the controller on the I2C bus. Most likely
+         0x3c or 0x3d
+  - pwm: Should contain the pwm to use according to the OF device tree PWM
+         specification [0]. Only required for the ssd1307.
+  - reset-gpios: Should contain the GPIO used to reset the OLED display
+  - solomon,height: Height in pixel of the screen driven by the controller
+  - solomon,width: Width in pixel of the screen driven by the controller
+  - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is
+    mapped to.
+
+Optional properties:
+  - reset-active-low: Is the reset gpio is active on physical low?
+
+[0]: Documentation/devicetree/bindings/pwm/pwm.txt
+
+Examples:
+ssd1307: oled@3c {
+        compatible = "solomon,ssd1307fb-i2c";
+        reg = <0x3c>;
+        pwms = <&pwm 4 3000>;
+        reset-gpios = <&gpio2 7>;
+        reset-active-low;
+};

Documentation/devicetree/bindings/video/thine,thc63lvdm83d

@@ -0,0 +1,50 @@
+THine Electronics THC63LVDM83D LVDS serializer
+----------------------------------------------
+
+The THC63LVDM83D is an LVDS serializer designed to support pixel data
+transmission between a host and a flat panel.
+
+Required properties:
+
+- compatible: Should be "thine,thc63lvdm83d"
+
+Optional properties:
+
+- pwdn-gpios: Power down control GPIO
+
+Required nodes:
+
+The THC63LVDM83D has two video ports. Their connections are modeled using the
+OFgraph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for CMOS/TTL input
+- Video port 1 for LVDS output
+
+
+Example
+-------
+
+	lvds_enc: encoder@0 {
+		compatible = "thine,thc63lvdm83d";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_enc_in: endpoint@0 {
+					remote-endpoint = <&rgb_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_enc_out: endpoint@0 {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};

Documentation/devicetree/bindings/video/ti,omap-dss.txt

@@ -0,0 +1,211 @@
+Texas Instruments OMAP Display Subsystem
+========================================
+
+Generic Description
+-------------------
+
+This document is a generic description of the OMAP Display Subsystem bindings.
+Binding details for each OMAP SoC version are described in respective binding
+documentation.
+
+The OMAP Display Subsystem (DSS) hardware consists of DSS Core, DISPC module and
+a number of encoder modules. All DSS versions contain DSS Core and DISPC, but
+the encoder modules vary.
+
+The DSS Core is the parent of the other DSS modules, and manages clock routing,
+integration to the SoC, etc.
+
+DISPC is the display controller, which reads pixels from the memory and outputs
+a RGB pixel stream to encoders.
+
+The encoder modules encode the received RGB pixel stream to a video output like
+HDMI, MIPI DPI, etc.
+
+Video Ports
+-----------
+
+The DSS Core and the encoders have video port outputs. The structure of the
+video ports is described in Documentation/devicetree/bindings/video/video-
+ports.txt, and the properties for the ports and endpoints for each encoder are
+described in the SoC's DSS binding documentation.
+
+The video ports are used to describe the connections to external hardware, like
+panels or external encoders.
+
+Aliases
+-------
+
+The board dts file may define aliases for displays to assign "displayX" style
+name for each display. If no aliases are defined, a semi-random number is used
+for the display.
+
+Example
+-------
+
+A shortened example of the DSS description for OMAP4, with non-relevant parts
+removed, defined in omap4.dtsi:
+
+dss: dss@58000000 {
+	compatible = "ti,omap4-dss";
+	reg = <0x58000000 0x80>;
+	status = "disabled";
+	ti,hwmods = "dss_core";
+	clocks = <&dss_dss_clk>;
+	clock-names = "fck";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	dispc@58001000 {
+		compatible = "ti,omap4-dispc";
+		reg = <0x58001000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "dss_dispc";
+		clocks = <&dss_dss_clk>;
+		clock-names = "fck";
+	};
+
+	hdmi: encoder@58006000 {
+		compatible = "ti,omap4-hdmi";
+		reg = <0x58006000 0x200>,
+		      <0x58006200 0x100>,
+		      <0x58006300 0x100>,
+		      <0x58006400 0x1000>;
+		reg-names = "wp", "pll", "phy", "core";
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+		ti,hwmods = "dss_hdmi";
+		clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+		clock-names = "fck", "sys_clk";
+	};
+};
+
+A shortened example of the board description for OMAP4 Panda board, defined in
+omap4-panda.dts.
+
+The Panda board has a DVI and a HDMI connector, and the board contains a TFP410
+chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level
+shifter). The video pipelines for the connectors are formed as follows:
+
+DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector
+OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector
+
+/ {
+	aliases {
+		display0 = &dvi0;
+		display1 = &hdmi0;
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* 0, power-down */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tfp410_pins>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder@1 {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@1 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};

Documentation/devicetree/bindings/video/ti,omap2-dss.txt

@@ -0,0 +1,54 @@
+Texas Instruments OMAP2 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap2-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+
+Optional nodes:
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap2-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap2-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap2-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+
+VENC Endpoint required properties:
+
+Required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video

Documentation/devicetree/bindings/video/ti,omap3-dss.txt

@@ -0,0 +1,83 @@
+Texas Instruments OMAP3 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap3-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video ports:
+	- Port 0: DPI output
+	- Port 1: SDI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+SDI Endpoint required properties:
+- datapairs: number of datapairs used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap3-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap3-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap3-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap3-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...

Documentation/devicetree/bindings/video/ti,omap4-dss.txt

@@ -0,0 +1,115 @@
+Texas Instruments OMAP4 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap4-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: RFBI, VENC, DSI, HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap4-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap4-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+Optional nodes:
+- Video port for RFBI output
+- RFBI controlled peripherals
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap4-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video port for VENC output
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap4-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1" or "dss_dsi2"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for DSI output
+- DSI controlled peripherals
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,omap4-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+       'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+  D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)

Documentation/devicetree/bindings/video/ti,omap5-dss.txt

@@ -0,0 +1,96 @@
+Texas Instruments OMAP5 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap5-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: RFBI, DSI, HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap5-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap5-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+Optional nodes:
+- Video port for RFBI output
+- RFBI controlled peripherals
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap5-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1" or "dss_dsi2"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for DSI output
+- DSI controlled peripherals
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,omap5-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+       'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+  D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)

Documentation/devicetree/bindings/video/ti,tfp410.txt

@@ -0,0 +1,41 @@
+TFP410 DPI to DVI encoder
+=========================
+
+Required properties:
+- compatible: "ti,tfp410"
+
+Optional properties:
+- powerdown-gpios: power-down gpio
+
+Required nodes:
+- Video port 0 for DPI input
+- Video port 1 for DVI output
+
+Example
+-------
+
+tfp410: encoder@0 {
+	compatible = "ti,tfp410";
+	powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tfp410_in: endpoint@0 {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			tfp410_out: endpoint@0 {
+				remote-endpoint = <&dvi_connector_in>;
+			};
+		};
+	};
+};

Documentation/devicetree/bindings/video/ti,tpd12s015.txt

@@ -0,0 +1,44 @@
+TPD12S015 HDMI level shifter and ESD protection chip
+====================================================
+
+Required properties:
+- compatible: "ti,tpd12s015"
+
+Optional properties:
+- gpios: CT CP HPD, LS OE and HPD gpios
+
+Required nodes:
+- Video port 0 for HDMI input
+- Video port 1 for HDMI output
+
+Example
+-------
+
+tpd12s015: encoder@1 {
+	compatible = "ti,tpd12s015";
+
+	gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+		<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+		<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tpd12s015_in: endpoint@0 {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			tpd12s015_out: endpoint@0 {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};

Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt

@@ -0,0 +1,30 @@
+Toppoly TD028TTEC1 Panel
+========================
+
+Required properties:
+- compatible: "toppoly,td028ttec1"
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: td028ttec1@0 {
+	compatible = "toppoly,td028ttec1";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
+

Documentation/devicetree/bindings/video/tpo,td043mtea1.txt

@@ -0,0 +1,33 @@
+TPO TD043MTEA1 Panel
+====================
+
+Required properties:
+- compatible: "tpo,td043mtea1"
+- reset-gpios: panel reset gpio
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: panel@0 {
+	compatible = "tpo,td043mtea1";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+
+	reset-gpios = <&gpio7 7 0>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};

Documentation/devicetree/bindings/video/vga-connector.txt

@@ -0,0 +1,36 @@
+VGA Connector
+=============
+
+Required properties:
+
+- compatible: "vga-connector"
+
+Optional properties:
+
+- label: a symbolic name for the connector corresponding to a hardware label
+- ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC
+
+Required nodes:
+
+The VGA connector internal connections are modeled using the OF graph bindings
+specified in Documentation/devicetree/bindings/graph.txt.
+
+The VGA connector has a single port that must be connected to a video source
+port.
+
+
+Example
+-------
+
+vga0: connector@0 {
+	compatible = "vga-connector";
+	label = "vga";
+
+	ddc-i2c-bus = <&i2c3>;
+
+	port {
+		vga_connector_in: endpoint {
+			remote-endpoint = <&adv7123_out>;
+		};
+	};
+};

Documentation/devicetree/bindings/video/via,vt8500-fb.txt

@@ -0,0 +1,36 @@
+VIA VT8500 Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-fb"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : framebuffer controller interrupt
+- bits-per-pixel : bit depth of framebuffer (16 or 32)
+
+Required subnodes:
+- display-timings: see display-timing.txt for information
+
+Example:
+
+	fb@d8050800 {
+		compatible = "via,vt8500-fb";
+		reg = <0xd800e400 0x400>;
+		interrupts = <12>;
+		bits-per-pixel = <16>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 800x480 {
+				clock-frequency = <0>; /* unused but required */
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <40>;
+				hback-porch = <88>;
+				hsync-len = <0>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+			};
+		};
+	};
+

Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt

@@ -0,0 +1,13 @@
+VIA/Wondermedia Graphics Engine Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "wm,prizm-ge-rops"
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+
+	ge_rops@d8050400 {
+		compatible = "wm,prizm-ge-rops";
+		reg = <0xd8050400 0x100>;
+	};

Documentation/devicetree/bindings/video/wm,wm8505-fb.txt

@@ -0,0 +1,33 @@
+Wondermedia WM8505 Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "wm,wm8505-fb"
+- reg : Should contain 1 register ranges(address and length)
+- bits-per-pixel : bit depth of framebuffer (16 or 32)
+
+Required subnodes:
+- display-timings: see display-timing.txt for information
+
+Example:
+
+	fb@d8051700 {
+		compatible = "wm,wm8505-fb";
+		reg = <0xd8051700 0x200>;
+		bits-per-pixel = <16>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 800x480 {
+				clock-frequency = <0>; /* unused but required */
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <40>;
+				hback-porch = <88>;
+				hsync-len = <0>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+			};
+		};
+	};