mirror of
https://github.com/AetherDroid/android_kernel_samsung_on5xelte.git
synced 2025-09-06 16:28:04 -04:00
Fixed MTP to work with TWRP
This commit is contained in:
commit
f6dfaef42e
50820 changed files with 20846062 additions and 0 deletions
54
Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
Normal file
54
Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
Normal file
|
@ -0,0 +1,54 @@
|
|||
The controls for the mux are GPIO [0,1] for source, and GPIO 2 for muting.
|
||||
|
||||
GPIO0 GPIO1
|
||||
0 0 TV Audio
|
||||
1 0 FM radio
|
||||
0 1 Line-In
|
||||
1 1 Mono tuner bypass or CD passthru (tuner specific)
|
||||
|
||||
GPIO 16(i believe) is tied to the IR port (if present).
|
||||
|
||||
------------------------------------------------------------------------------------
|
||||
|
||||
>From the data sheet:
|
||||
Register 24'h20004 PCI Interrupt Status
|
||||
bit [18] IR_SMP_INT Set when 32 input samples have been collected over
|
||||
gpio[16] pin into GP_SAMPLE register.
|
||||
|
||||
What's missing from the data sheet:
|
||||
|
||||
Setup 4KHz sampling rate (roughly 2x oversampled; good enough for our RC5
|
||||
compat remote)
|
||||
set register 0x35C050 to 0xa80a80
|
||||
|
||||
enable sampling
|
||||
set register 0x35C054 to 0x5
|
||||
|
||||
Of course, enable the IRQ bit 18 in the interrupt mask register .(and
|
||||
provide for a handler)
|
||||
|
||||
GP_SAMPLE register is at 0x35C058
|
||||
|
||||
Bits are then right shifted into the GP_SAMPLE register at the specified
|
||||
rate; you get an interrupt when a full DWORD is received.
|
||||
You need to recover the actual RC5 bits out of the (oversampled) IR sensor
|
||||
bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data) An
|
||||
actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment.
|
||||
|
||||
I'm pretty sure when no IR signal is present the receiver is always in a
|
||||
marking state(1); but stray light, etc can cause intermittent noise values
|
||||
as well. Remember, this is a free running sample of the IR receiver state
|
||||
over time, so don't assume any sample starts at any particular place.
|
||||
|
||||
http://www.atmel.com/dyn/resources/prod_documents/doc2817.pdf
|
||||
This data sheet (google search) seems to have a lovely description of the
|
||||
RC5 basics
|
||||
|
||||
http://www.nenya.be/beor/electronics/rc5.htm and more data
|
||||
|
||||
http://www.ee.washington.edu/circuit_archive/text/ir_decode.txt
|
||||
and even a reference to how to decode a bi-phase data stream.
|
||||
|
||||
http://www.xs4all.nl/~sbp/knowledge/ir/rc5.htm
|
||||
still more info
|
||||
|
Loading…
Add table
Add a link
Reference in a new issue