mirror of
				https://github.com/AetherDroid/android_kernel_samsung_on5xelte.git
				synced 2025-10-31 08:08:51 +01:00 
			
		
		
		
	Fixed MTP to work with TWRP
This commit is contained in:
		
						commit
						f6dfaef42e
					
				
					 50820 changed files with 20846062 additions and 0 deletions
				
			
		
							
								
								
									
										107
									
								
								arch/arm/boot/dts/at91sam9x5cm.dtsi
									
										
									
									
									
										Normal file
									
								
							
							
						
						
									
										107
									
								
								arch/arm/boot/dts/at91sam9x5cm.dtsi
									
										
									
									
									
										Normal file
									
								
							|  | @ -0,0 +1,107 @@ | |||
| /* | ||||
|  * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module | ||||
|  * | ||||
|  *  Copyright (C) 2012 Atmel, | ||||
|  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com> | ||||
|  * | ||||
|  * Licensed under GPLv2 or later. | ||||
|  */ | ||||
| 
 | ||||
| / { | ||||
| 	memory { | ||||
| 		reg = <0x20000000 0x8000000>; | ||||
| 	}; | ||||
| 
 | ||||
| 	clocks { | ||||
| 		#address-cells = <1>; | ||||
| 		#size-cells = <1>; | ||||
| 		ranges; | ||||
| 
 | ||||
| 		main_clock: clock@0 { | ||||
| 			compatible = "atmel,osc", "fixed-clock"; | ||||
| 			clock-frequency = <12000000>; | ||||
| 		}; | ||||
| 	}; | ||||
| 
 | ||||
| 	clocks { | ||||
| 		slow_xtal { | ||||
| 			clock-frequency = <32768>; | ||||
| 		}; | ||||
| 
 | ||||
| 		main_xtal { | ||||
| 			clock-frequency = <12000000>; | ||||
| 		}; | ||||
| 	}; | ||||
| 
 | ||||
| 	ahb { | ||||
| 		apb { | ||||
| 			pinctrl@fffff400 { | ||||
| 				1wire_cm { | ||||
| 					pinctrl_1wire_cm: 1wire_cm-0 { | ||||
| 						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */ | ||||
| 					}; | ||||
| 				}; | ||||
| 			}; | ||||
| 		}; | ||||
| 
 | ||||
| 		nand0: nand@40000000 { | ||||
| 			nand-bus-width = <8>; | ||||
| 			nand-ecc-mode = "hw"; | ||||
| 			atmel,has-pmecc;	/* Enable PMECC */ | ||||
| 			atmel,pmecc-cap = <2>; | ||||
| 			atmel,pmecc-sector-size = <512>; | ||||
| 			nand-on-flash-bbt; | ||||
| 			status = "okay"; | ||||
| 
 | ||||
| 			at91bootstrap@0 { | ||||
| 				label = "at91bootstrap"; | ||||
| 				reg = <0x0 0x40000>; | ||||
| 			}; | ||||
| 
 | ||||
| 			uboot@40000 { | ||||
| 				label = "u-boot"; | ||||
| 				reg = <0x40000 0x80000>; | ||||
| 			}; | ||||
| 
 | ||||
| 			ubootenv@c0000 { | ||||
| 				label = "U-Boot Env"; | ||||
| 				reg = <0xc0000 0x140000>; | ||||
| 			}; | ||||
| 
 | ||||
| 			kernel@200000 { | ||||
| 				label = "kernel"; | ||||
| 				reg = <0x200000 0x600000>; | ||||
| 			}; | ||||
| 
 | ||||
| 			rootfs@800000 { | ||||
| 				label = "rootfs"; | ||||
| 				reg = <0x800000 0x1f800000>; | ||||
| 			}; | ||||
| 		}; | ||||
| 	}; | ||||
| 
 | ||||
| 	leds { | ||||
| 		compatible = "gpio-leds"; | ||||
| 
 | ||||
| 		pb18 { | ||||
| 			label = "pb18"; | ||||
| 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>; | ||||
| 			linux,default-trigger = "heartbeat"; | ||||
| 		}; | ||||
| 
 | ||||
| 		pd21 { | ||||
| 			label = "pd21"; | ||||
| 			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>; | ||||
| 		}; | ||||
| 	}; | ||||
| 
 | ||||
| 	1wire_cm { | ||||
| 		compatible = "w1-gpio"; | ||||
| 		gpios = <&pioB 18 GPIO_ACTIVE_HIGH>; | ||||
| 		linux,open-drain; | ||||
| 		pinctrl-names = "default"; | ||||
| 		pinctrl-0 = <&pinctrl_1wire_cm>; | ||||
| 		status = "okay"; | ||||
| 	}; | ||||
| 
 | ||||
| }; | ||||
		Loading…
	
	Add table
		Add a link
		
	
		Reference in a new issue
	
	 awab228
						awab228