mirror of
https://github.com/AetherDroid/android_kernel_samsung_on5xelte.git
synced 2025-10-31 08:08:51 +01:00
Fixed MTP to work with TWRP
This commit is contained in:
awab228
commit
f6dfaef42e
50820 changed files with 20846062 additions and 0 deletions
535
arch/arm/boot/dts/omap4-panda-common.dtsi
Normal file
535
arch/arm/boot/dts/omap4-panda-common.dtsi
Normal file
|
|
@ -0,0 +1,535 @@
|
|||
/*
|
||||
* Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#include "elpida_ecb240abacn.dtsi"
|
||||
|
||||
/ {
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
aliases {
|
||||
display0 = &dvi0;
|
||||
display1 = &hdmi0;
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&led_wkgpio_pins
|
||||
>;
|
||||
|
||||
heartbeat {
|
||||
label = "pandaboard::status1";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
mmc {
|
||||
label = "pandaboard::status2";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
};
|
||||
|
||||
sound: sound {
|
||||
compatible = "ti,abe-twl6040";
|
||||
ti,model = "PandaBoard";
|
||||
|
||||
ti,mclk-freq = <38400000>;
|
||||
|
||||
ti,mcpdm = <&mcpdm>;
|
||||
|
||||
ti,twl6040 = <&twl6040>;
|
||||
|
||||
/* Audio routing */
|
||||
ti,audio-routing =
|
||||
"Headset Stereophone", "HSOL",
|
||||
"Headset Stereophone", "HSOR",
|
||||
"Ext Spk", "HFL",
|
||||
"Ext Spk", "HFR",
|
||||
"Line Out", "AUXL",
|
||||
"Line Out", "AUXR",
|
||||
"HSMIC", "Headset Mic",
|
||||
"Headset Mic", "Headset Mic Bias",
|
||||
"AFML", "Line In",
|
||||
"AFMR", "Line In";
|
||||
};
|
||||
|
||||
/* HS USB Port 1 Power */
|
||||
hsusb1_power: hsusb1_power_reg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "hsusb1_vbus";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio1 1 0>; /* gpio_1 */
|
||||
startup-delay-us = <70000>;
|
||||
enable-active-high;
|
||||
/*
|
||||
* boot-on is required along with always-on as the
|
||||
* regulator framework doesn't enable the regulator
|
||||
* if boot-on is not there.
|
||||
*/
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* HS USB Host PHY on PORT 1 */
|
||||
hsusb1_phy: hsusb1_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
|
||||
vcc-supply = <&hsusb1_power>;
|
||||
clocks = <&auxclk3_ck>;
|
||||
clock-names = "main_clk";
|
||||
clock-frequency = <19200000>;
|
||||
};
|
||||
|
||||
/* regulator for wl12xx on sdio5 */
|
||||
wl12xx_vmmc: wl12xx_vmmc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wl12xx_gpio>;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vwl1271";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
gpio = <&gpio2 11 0>;
|
||||
startup-delay-us = <70000>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
tfp410: encoder@0 {
|
||||
compatible = "ti,tfp410";
|
||||
powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
tfp410_in: endpoint@0 {
|
||||
remote-endpoint = <&dpi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
tfp410_out: endpoint@0 {
|
||||
remote-endpoint = <&dvi_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dvi0: connector@0 {
|
||||
compatible = "dvi-connector";
|
||||
label = "dvi";
|
||||
|
||||
digital;
|
||||
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
|
||||
port {
|
||||
dvi_connector_in: endpoint {
|
||||
remote-endpoint = <&tfp410_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
tpd12s015: encoder@1 {
|
||||
compatible = "ti,tpd12s015";
|
||||
|
||||
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
|
||||
<&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
|
||||
<&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
tpd12s015_in: endpoint@0 {
|
||||
remote-endpoint = <&hdmi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
tpd12s015_out: endpoint@0 {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi0: connector@1 {
|
||||
compatible = "hdmi-connector";
|
||||
label = "hdmi";
|
||||
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&tpd12s015_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&omap4_pmx_core {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&dss_dpi_pins
|
||||
&tfp410_pins
|
||||
&dss_hdmi_pins
|
||||
&tpd12s015_pins
|
||||
&hsusbb1_pins
|
||||
>;
|
||||
|
||||
twl6040_pins: pinmux_twl6040_pins {
|
||||
pinctrl-single,pins = <
|
||||
0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
|
||||
0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
|
||||
>;
|
||||
};
|
||||
|
||||
mcpdm_pins: pinmux_mcpdm_pins {
|
||||
pinctrl-single,pins = <
|
||||
0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
|
||||
0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
|
||||
0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
|
||||
0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
|
||||
0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
|
||||
>;
|
||||
};
|
||||
|
||||
mcbsp1_pins: pinmux_mcbsp1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
|
||||
0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
|
||||
0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
|
||||
0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
|
||||
>;
|
||||
};
|
||||
|
||||
dss_dpi_pins: pinmux_dss_dpi_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x122 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */
|
||||
0x124 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */
|
||||
0x126 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */
|
||||
0x128 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */
|
||||
0x12a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */
|
||||
0x12c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */
|
||||
0x12e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */
|
||||
0x130 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */
|
||||
0x132 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */
|
||||
0x134 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */
|
||||
0x136 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */
|
||||
|
||||
0x174 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */
|
||||
0x176 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */
|
||||
0x178 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */
|
||||
0x17a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */
|
||||
0x17c (PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */
|
||||
0x17e (PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */
|
||||
0x180 (PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */
|
||||
0x182 (PIN_OUTPUT | MUX_MODE5) /* dispc2_de */
|
||||
0x184 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */
|
||||
0x186 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */
|
||||
0x188 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */
|
||||
0x18a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */
|
||||
0x18c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */
|
||||
0x18e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */
|
||||
|
||||
0x190 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */
|
||||
0x192 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */
|
||||
0x194 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */
|
||||
>;
|
||||
};
|
||||
|
||||
tfp410_pins: pinmux_tfp410_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x144 (PIN_OUTPUT | MUX_MODE3) /* gpio_0 */
|
||||
>;
|
||||
};
|
||||
|
||||
dss_hdmi_pins: pinmux_dss_hdmi_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
|
||||
0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
|
||||
0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
tpd12s015_pins: pinmux_tpd12s015_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
|
||||
0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
|
||||
0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
|
||||
>;
|
||||
};
|
||||
|
||||
hsusbb1_pins: pinmux_hsusbb1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
|
||||
0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
|
||||
0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
|
||||
0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
|
||||
0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
|
||||
0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
|
||||
0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
|
||||
0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
|
||||
0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
|
||||
0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
|
||||
0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
|
||||
0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c1_pins: pinmux_i2c1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
|
||||
0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c2_pins: pinmux_i2c2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
|
||||
0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c3_pins: pinmux_i2c3_pins {
|
||||
pinctrl-single,pins = <
|
||||
0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
|
||||
0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c4_pins: pinmux_i2c4_pins {
|
||||
pinctrl-single,pins = <
|
||||
0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
|
||||
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
/*
|
||||
* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
|
||||
* REVISIT: Are the pull-ups needed for GPIO 48 and 49?
|
||||
*/
|
||||
wl12xx_gpio: pinmux_wl12xx_gpio {
|
||||
pinctrl-single,pins = <
|
||||
0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
|
||||
0x2c (PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */
|
||||
0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */
|
||||
0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */
|
||||
>;
|
||||
};
|
||||
|
||||
/* wl12xx GPIO inputs and SDIO pins */
|
||||
wl12xx_pins: pinmux_wl12xx_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
|
||||
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
|
||||
0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
|
||||
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
|
||||
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
|
||||
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
|
||||
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
|
||||
0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap4_pmx_wkup {
|
||||
led_wkgpio_pins: pinmux_leds_wkpins {
|
||||
pinctrl-single,pins = <
|
||||
0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
|
||||
0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
|
||||
clock-frequency = <400000>;
|
||||
|
||||
twl: twl@48 {
|
||||
reg = <0x48>;
|
||||
/* IRQ# = 7 */
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
|
||||
interrupt-parent = <&gic>;
|
||||
};
|
||||
|
||||
twl6040: twl@4b {
|
||||
compatible = "ti,twl6040";
|
||||
reg = <0x4b>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&twl6040_pins>;
|
||||
|
||||
/* IRQ# = 119 */
|
||||
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
|
||||
interrupt-parent = <&gic>;
|
||||
ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
|
||||
|
||||
vio-supply = <&v1v8>;
|
||||
v2v1-supply = <&v2v1>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
#include "twl6030.dtsi"
|
||||
#include "twl6030_omap4.dtsi"
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
|
||||
clock-frequency = <100000>;
|
||||
|
||||
/*
|
||||
* Display monitor features are burnt in their EEPROM as EDID data.
|
||||
* The EEPROM is connected as I2C slave device.
|
||||
*/
|
||||
eeprom@50 {
|
||||
compatible = "ti,eeprom";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
vmmc-supply = <&vmmc>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mmc3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mmc4 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mmc5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wl12xx_pins>;
|
||||
vmmc-supply = <&wl12xx_vmmc>;
|
||||
non-removable;
|
||||
bus-width = <4>;
|
||||
cap-power-off-card;
|
||||
};
|
||||
|
||||
&emif1 {
|
||||
cs1-used;
|
||||
device-handle = <&elpida_ECB240ABACN>;
|
||||
};
|
||||
|
||||
&emif2 {
|
||||
cs1-used;
|
||||
device-handle = <&elpida_ECB240ABACN>;
|
||||
};
|
||||
|
||||
&mcbsp1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcbsp1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mcpdm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcpdm_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&twl_usb_comparator {
|
||||
usb-supply = <&vusb>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
|
||||
&omap4_pmx_core OMAP4_UART2_RX>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
|
||||
&omap4_pmx_core OMAP4_UART3_RX>;
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
|
||||
&omap4_pmx_core OMAP4_UART4_RX>;
|
||||
};
|
||||
|
||||
&usb_otg_hs {
|
||||
interface-type = <1>;
|
||||
mode = <3>;
|
||||
power = <50>;
|
||||
};
|
||||
|
||||
&usbhshost {
|
||||
port1-mode = "ehci-phy";
|
||||
};
|
||||
|
||||
&usbhsehci {
|
||||
phys = <&hsusb1_phy>;
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "ok";
|
||||
|
||||
port {
|
||||
dpi_out: endpoint {
|
||||
remote-endpoint = <&tfp410_in>;
|
||||
data-lines = <24>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi2 {
|
||||
status = "ok";
|
||||
vdd-supply = <&vcxio>;
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
status = "ok";
|
||||
vdda-supply = <&vdac>;
|
||||
|
||||
port {
|
||||
hdmi_out: endpoint {
|
||||
remote-endpoint = <&tpd12s015_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Add table
Add a link
Reference in a new issue