mirror of
https://github.com/AetherDroid/android_kernel_samsung_on5xelte.git
synced 2025-10-31 16:18:51 +01:00
Fixed MTP to work with TWRP
This commit is contained in:
awab228
commit
f6dfaef42e
50820 changed files with 20846062 additions and 0 deletions
636
arch/arm/boot/dts/omap5-uevm.dts
Normal file
636
arch/arm/boot/dts/omap5-uevm.dts
Normal file
|
|
@ -0,0 +1,636 @@
|
|||
/*
|
||||
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "omap5.dtsi"
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
/ {
|
||||
model = "TI OMAP5 uEVM board";
|
||||
compatible = "ti,omap5-uevm", "ti,omap5";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x7F000000>; /* 2032 MB */
|
||||
};
|
||||
|
||||
aliases {
|
||||
display0 = &hdmi0;
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixedregulator-mmcsd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
/* HS USB Host PHY on PORT 2 */
|
||||
hsusb2_phy: hsusb2_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
|
||||
clocks = <&auxclk1_ck>;
|
||||
clock-names = "main_clk";
|
||||
clock-frequency = <19200000>;
|
||||
};
|
||||
|
||||
/* HS USB Host PHY on PORT 3 */
|
||||
hsusb3_phy: hsusb3_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led@1 {
|
||||
label = "omap5:blue:usr1";
|
||||
gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
tpd12s015: encoder@0 {
|
||||
compatible = "ti,tpd12s015";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tpd12s015_pins>;
|
||||
|
||||
gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */
|
||||
<&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
|
||||
<&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
tpd12s015_in: endpoint@0 {
|
||||
remote-endpoint = <&hdmi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
tpd12s015_out: endpoint@0 {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi0: connector@0 {
|
||||
compatible = "hdmi-connector";
|
||||
label = "hdmi";
|
||||
|
||||
type = "b";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&tpd12s015_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sound: sound {
|
||||
compatible = "ti,abe-twl6040";
|
||||
ti,model = "omap5-uevm";
|
||||
|
||||
ti,mclk-freq = <19200000>;
|
||||
|
||||
ti,mcpdm = <&mcpdm>;
|
||||
|
||||
ti,twl6040 = <&twl6040>;
|
||||
|
||||
/* Audio routing */
|
||||
ti,audio-routing =
|
||||
"Headset Stereophone", "HSOL",
|
||||
"Headset Stereophone", "HSOR",
|
||||
"Line Out", "AUXL",
|
||||
"Line Out", "AUXR",
|
||||
"HSMIC", "Headset Mic",
|
||||
"Headset Mic", "Headset Mic Bias",
|
||||
"AFML", "Line In",
|
||||
"AFMR", "Line In";
|
||||
};
|
||||
};
|
||||
|
||||
&omap5_pmx_core {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&usbhost_pins
|
||||
&led_gpio_pins
|
||||
>;
|
||||
|
||||
twl6040_pins: pinmux_twl6040_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
|
||||
>;
|
||||
};
|
||||
|
||||
mcpdm_pins: pinmux_mcpdm_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
|
||||
0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
|
||||
0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
|
||||
0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
|
||||
0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
|
||||
>;
|
||||
};
|
||||
|
||||
mcbsp1_pins: pinmux_mcbsp1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
|
||||
0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
|
||||
0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
|
||||
0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
|
||||
>;
|
||||
};
|
||||
|
||||
mcbsp2_pins: pinmux_mcbsp2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
|
||||
0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
|
||||
0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
|
||||
0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c1_pins: pinmux_i2c1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
|
||||
0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c5_pins: pinmux_i2c5_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
|
||||
0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
mcspi2_pins: pinmux_mcspi2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
|
||||
0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
|
||||
0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
|
||||
0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */
|
||||
>;
|
||||
};
|
||||
|
||||
mcspi3_pins: pinmux_mcspi3_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */
|
||||
0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */
|
||||
0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */
|
||||
0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */
|
||||
>;
|
||||
};
|
||||
|
||||
mcspi4_pins: pinmux_mcspi4_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x164 (PIN_INPUT | MUX_MODE1) /* mcspi4_clk */
|
||||
0x168 (PIN_INPUT | MUX_MODE1) /* mcspi4_simo */
|
||||
0x16a (PIN_INPUT | MUX_MODE1) /* mcspi4_somi */
|
||||
0x16c (PIN_INPUT | MUX_MODE1) /* mcspi4_cs0 */
|
||||
>;
|
||||
};
|
||||
|
||||
usbhost_pins: pinmux_usbhost_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
|
||||
0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
|
||||
|
||||
0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
|
||||
0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
|
||||
|
||||
0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
|
||||
0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
|
||||
>;
|
||||
};
|
||||
|
||||
led_gpio_pins: pinmux_led_gpio_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
|
||||
>;
|
||||
};
|
||||
|
||||
uart1_pins: pinmux_uart1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
|
||||
0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
|
||||
0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
|
||||
0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
|
||||
>;
|
||||
};
|
||||
|
||||
uart3_pins: pinmux_uart3_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
|
||||
0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
|
||||
>;
|
||||
};
|
||||
|
||||
uart5_pins: pinmux_uart5_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
|
||||
0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
|
||||
0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
|
||||
0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
|
||||
>;
|
||||
};
|
||||
|
||||
dss_hdmi_pins: pinmux_dss_hdmi_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
|
||||
0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
|
||||
0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
tpd12s015_pins: pinmux_tpd12s015_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap5_pmx_wkup {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&usbhost_wkup_pins
|
||||
>;
|
||||
|
||||
usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
vmmc-supply = <&ldo9_reg>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
bus-width = <8>;
|
||||
ti,non-removable;
|
||||
};
|
||||
|
||||
&mmc3 {
|
||||
bus-width = <4>;
|
||||
ti,non-removable;
|
||||
};
|
||||
|
||||
&mmc4 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mmc5 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
|
||||
clock-frequency = <400000>;
|
||||
|
||||
palmas: palmas@48 {
|
||||
compatible = "ti,palmas";
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
|
||||
interrupt-parent = <&gic>;
|
||||
reg = <0x48>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
ti,system-power-controller;
|
||||
|
||||
extcon_usb3: palmas_usb {
|
||||
compatible = "ti,palmas-usb-vid";
|
||||
ti,enable-vbus-detection;
|
||||
ti,enable-id-detection;
|
||||
ti,wakeup;
|
||||
};
|
||||
|
||||
clk32kgaudio: palmas_clk32k@1 {
|
||||
compatible = "ti,palmas-clk32kgaudio";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
palmas_pmic {
|
||||
compatible = "ti,palmas-pmic";
|
||||
interrupt-parent = <&palmas>;
|
||||
interrupts = <14 IRQ_TYPE_NONE>;
|
||||
interrupt-name = "short-irq";
|
||||
|
||||
ti,ldo6-vibrator;
|
||||
|
||||
regulators {
|
||||
smps123_reg: smps123 {
|
||||
/* VDD_OPP_MPU */
|
||||
regulator-name = "smps123";
|
||||
regulator-min-microvolt = < 600000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps45_reg: smps45 {
|
||||
/* VDD_OPP_MM */
|
||||
regulator-name = "smps45";
|
||||
regulator-min-microvolt = < 600000>;
|
||||
regulator-max-microvolt = <1310000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps6_reg: smps6 {
|
||||
/* VDD_DDR3 - over VDD_SMPS6 */
|
||||
regulator-name = "smps6";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps7_reg: smps7 {
|
||||
/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
|
||||
regulator-name = "smps7";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps8_reg: smps8 {
|
||||
/* VDD_OPP_CORE */
|
||||
regulator-name = "smps8";
|
||||
regulator-min-microvolt = < 600000>;
|
||||
regulator-max-microvolt = <1310000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps9_reg: smps9 {
|
||||
/* VDDA_2v1_AUD over VDD_2v1 */
|
||||
regulator-name = "smps9";
|
||||
regulator-min-microvolt = <2100000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
ti,smps-range = <0x80>;
|
||||
};
|
||||
|
||||
smps10_out2_reg: smps10_out2 {
|
||||
/* VBUS_5V_OTG */
|
||||
regulator-name = "smps10_out2";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps10_out1_reg: smps10_out1 {
|
||||
/* VBUS_5V_OTG */
|
||||
regulator-name = "smps10_out1";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
ldo1_reg: ldo1 {
|
||||
/* VDDAPHY_CAM: vdda_csiport */
|
||||
regulator-name = "ldo1";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo2_reg: ldo2 {
|
||||
/* VCC_2V8_DISP: Does not go anywhere */
|
||||
regulator-name = "ldo2";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
/* Unused */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ldo3_reg: ldo3 {
|
||||
/* VDDAPHY_MDM: vdda_lli */
|
||||
regulator-name = "ldo3";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-boot-on;
|
||||
/* Only if Modem is used */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ldo4_reg: ldo4 {
|
||||
/* VDDAPHY_DISP: vdda_dsiport/hdmi */
|
||||
regulator-name = "ldo4";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo5_reg: ldo5 {
|
||||
/* VDDA_1V8_PHY: usb/sata/hdmi.. */
|
||||
regulator-name = "ldo5";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo6_reg: ldo6 {
|
||||
/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
|
||||
regulator-name = "ldo6";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo7_reg: ldo7 {
|
||||
/* VDD_VPP: vpp1 */
|
||||
regulator-name = "ldo7";
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
/* Only for efuse reprograming! */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ldo8_reg: ldo8 {
|
||||
/* VDD_3v0: Does not go anywhere */
|
||||
regulator-name = "ldo8";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-boot-on;
|
||||
/* Unused */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ldo9_reg: ldo9 {
|
||||
/* VCC_DV_SDIO: vdds_sdcard */
|
||||
regulator-name = "ldo9";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldoln_reg: ldoln {
|
||||
/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
|
||||
regulator-name = "ldoln";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldousb_reg: ldousb {
|
||||
/* VDDA_3V_USB: VDDA_USBHS33 */
|
||||
regulator-name = "ldousb";
|
||||
regulator-min-microvolt = <3250000>;
|
||||
regulator-max-microvolt = <3250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
regen3_reg: regen3 {
|
||||
/* REGEN3 controls LDO9 supply to card */
|
||||
regulator-name = "regen3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
twl6040: twl@4b {
|
||||
compatible = "ti,twl6040";
|
||||
reg = <0x4b>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&twl6040_pins>;
|
||||
|
||||
interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
|
||||
interrupt-parent = <&gic>;
|
||||
ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */
|
||||
|
||||
vio-supply = <&smps7_reg>;
|
||||
v2v1-supply = <&smps9_reg>;
|
||||
enable-active-high;
|
||||
|
||||
clocks = <&clk32kgaudio>;
|
||||
clock-names = "clk32k";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5_pins>;
|
||||
|
||||
clock-frequency = <400000>;
|
||||
|
||||
gpio9: gpio@22 {
|
||||
compatible = "ti,tca6424";
|
||||
reg = <0x22>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&mcpdm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcpdm_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mcbsp1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcbsp1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mcbsp2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcbsp2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbhshost {
|
||||
port2-mode = "ehci-hsic";
|
||||
port3-mode = "ehci-hsic";
|
||||
};
|
||||
|
||||
&usbhsehci {
|
||||
phys = <0 &hsusb2_phy &hsusb3_phy>;
|
||||
};
|
||||
|
||||
&usb3 {
|
||||
extcon = <&extcon_usb3>;
|
||||
vbus-supply = <&smps10_out1_reg>;
|
||||
};
|
||||
|
||||
&mcspi1 {
|
||||
|
||||
};
|
||||
|
||||
&mcspi2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcspi2_pins>;
|
||||
};
|
||||
|
||||
&mcspi3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcspi3_pins>;
|
||||
};
|
||||
|
||||
&mcspi4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcspi4_pins>;
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3_pins>;
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart5_pins>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu0-supply = <&smps123_reg>;
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
status = "ok";
|
||||
vdda-supply = <&ldo4_reg>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dss_hdmi_pins>;
|
||||
|
||||
port {
|
||||
hdmi_out: endpoint {
|
||||
remote-endpoint = <&tpd12s015_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Add table
Add a link
Reference in a new issue