Fixed MTP to work with TWRP

arch/arm/mach-mmp/Kconfig

@@ -0,0 +1,142 @@
+if ARCH_MMP
+
+menu "Marvell PXA168/910/MMP2 Implmentations"
+
+config MACH_ASPENITE
+	bool "Marvell's PXA168 Aspenite Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Aspenite Development Board.
+
+config MACH_ZYLONITE2
+	bool "Marvell's PXA168 Zylonite2 Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Zylonite2 Development Board.
+
+config MACH_AVENGERS_LITE
+	bool "Marvell's PXA168 Avengers Lite Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Avengers Lite Development Board.
+
+config MACH_TAVOREVB
+	bool "Marvell's PXA910 TavorEVB Development Board"
+	select CPU_PXA910
+	help
+	  Say 'Y' here if you want to support the Marvell PXA910-based
+	  TavorEVB Development Board.
+
+config MACH_TTC_DKB
+	bool "Marvell's PXA910 TavorEVB Development Board"
+	select CPU_PXA910
+	help
+	  Say 'Y' here if you want to support the Marvell PXA910-based
+	  TTC_DKB Development Board.
+
+config MACH_BROWNSTONE
+	bool "Marvell's Brownstone Development Platform"
+	depends on !CPU_MOHAWK
+	select CPU_MMP2
+	help
+	  Say 'Y' here if you want to support the Marvell MMP2-based
+	  Brown Development Platform.
+	  MMP2-based board can't be co-existed with PXA168-based &
+	  PXA910-based development board. Since MMP2 is compatible to
+	  ARMv7 architecture.
+
+config MACH_FLINT
+	bool "Marvell's Flint Development Platform"
+	depends on !CPU_MOHAWK
+	select CPU_MMP2
+	help
+	  Say 'Y' here if you want to support the Marvell MMP2-based
+	  Flint Development Platform.
+	  MMP2-based board can't be co-existed with PXA168-based &
+	  PXA910-based development board. Since MMP2 is compatible to
+	  ARMv7 architecture.
+
+config MACH_MARVELL_JASPER
+	bool "Marvell's Jasper Development Platform"
+	depends on !CPU_MOHAWK
+	select CPU_MMP2
+	help
+	  Say 'Y' here if you want to support the Marvell MMP2-base
+	  Jasper Development Platform.
+	  MMP2-based board can't be co-existed with PXA168-based &
+	  PXA910-based development board. Since MMP2 is compatible to
+	  ARMv7 architecture.
+
+config MACH_TETON_BGA
+	bool "Marvell's PXA168 Teton BGA Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Teton BGA Development Board.
+
+config MACH_GPLUGD
+	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  GuruPlug Display (gplugD) Board
+
+config MACH_MMP_DT
+	bool "Support MMP (ARMv5) platforms from device tree"
+	select CPU_PXA168
+	select CPU_PXA910
+	select USE_OF
+	select PINCTRL
+	select PINCTRL_SINGLE
+	help
+	  Include support for Marvell MMP2 based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_MMP_DT is enabled.
+
+config MACH_MMP2_DT
+	bool "Support MMP2 (ARMv7) platforms from device tree"
+	depends on !CPU_MOHAWK
+	select CPU_MMP2
+	select USE_OF
+	select PINCTRL
+	select PINCTRL_SINGLE
+	help
+	  Include support for Marvell MMP2 based platforms using
+	  the device tree.
+
+endmenu
+
+config CPU_PXA168
+	bool
+	select COMMON_CLK
+	select CPU_MOHAWK
+	help
+	  Select code specific to PXA168
+
+config CPU_PXA910
+	bool
+	select COMMON_CLK
+	select CPU_MOHAWK
+	help
+	  Select code specific to PXA910
+
+config CPU_MMP2
+	bool
+	select COMMON_CLK
+	select CPU_PJ4
+	help
+	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
+
+config USB_EHCI_MV_U2O
+        bool "EHCI support for PXA USB OTG controller"
+	depends on USB_EHCI_MV
+	help
+	  Enables support for OTG controller which can be switched to host mode.
+
+config MMP_SRAM
+	bool
+
+endif