Fixed MTP to work with TWRP

arch/arm/mach-pxa/Kconfig

@@ -0,0 +1,689 @@
+if ARCH_PXA
+
+menu "Intel PXA2xx/PXA3xx Implementations"
+
+comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
+
+config MACH_PXA3XX_DT
+	bool "Support PXA3xx platforms from device tree"
+	select CPU_PXA300
+	select POWER_SUPPLY
+	select PXA3xx
+	select USE_OF
+	help
+	  Include support for Marvell PXA3xx based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_PXA3XX_DT is enabled.
+
+config ARCH_LUBBOCK
+	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+	select PXA25x
+	select SA1111
+
+config MACH_MAINSTONE
+	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+	select PXA27x
+
+config MACH_ZYLONITE
+	bool
+	select PXA3xx
+
+config MACH_ZYLONITE300
+	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
+	select CPU_PXA300
+	select CPU_PXA310
+	select MACH_ZYLONITE
+
+config MACH_ZYLONITE320
+	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
+	select CPU_PXA320
+	select MACH_ZYLONITE
+
+config MACH_LITTLETON
+	bool "PXA3xx Form Factor Platform (aka Littleton)"
+	select CPU_PXA300
+	select CPU_PXA310
+	select PXA3xx
+
+config MACH_TAVOREVB
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select CPU_PXA930
+	select CPU_PXA935
+	select PXA3xx
+	select FB
+	select FB_PXA
+
+config MACH_SAAR
+	bool "PXA930 Handheld Platform (aka SAAR)"
+	select CPU_PXA930
+	select CPU_PXA935
+	select PXA3xx
+	select FB
+	select FB_PXA
+
+comment "Third Party Dev Platforms (sorted by vendor name)"
+
+config ARCH_PXA_IDP
+	bool "Accelent Xscale IDP"
+	select PXA25x
+
+config ARCH_VIPER
+	bool "Arcom/Eurotech VIPER SBC"
+	select ARCOM_PCMCIA
+	select I2C_GPIO if I2C=y
+	select ISA
+	select PXA25x
+	select PXA_HAVE_ISA_IRQS
+
+config MACH_ARCOM_ZEUS
+	bool "Arcom/Eurotech ZEUS SBC"
+	select ARCOM_PCMCIA
+	select ISA
+	select PXA27x
+	select PXA_HAVE_ISA_IRQS
+
+config MACH_BALLOON3
+	bool "Balloon 3 board"
+	select IWMMXT
+	select PXA27x
+
+config MACH_CSB726
+	bool "Enable Cogent CSB726 System On a Module"
+	select IWMMXT
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on a Cogent
+	  CSB726 System On Module.
+
+config CSB726_CSB701
+	bool "Enable support for CSB701 baseboard"
+	depends on MACH_CSB726
+
+config MACH_ARMCORE
+	bool "CompuLab CM-X255/CM-X270 modules"
+	select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
+	select IWMMXT
+	select MIGHT_HAVE_PCI
+	select NEED_MACH_IO_H if PCI
+	select PXA25x
+	select PXA27x
+
+config MACH_EM_X270
+	bool "CompuLab EM-x270 platform"
+	select PXA27x
+
+config MACH_EXEDA
+	bool "CompuLab eXeda platform"
+	select PXA27x
+
+config MACH_CM_X300
+	bool "CompuLab CM-X300 modules"
+	select CPU_PXA300
+	select CPU_PXA310
+	select PXA3xx
+
+config MACH_CAPC7117
+	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
+	select CPU_PXA320
+	select PXA3xx
+
+config ARCH_GUMSTIX
+	bool "Gumstix XScale 255 boards"
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on
+	  Basix, Connex, ws-200ax, ws-400ax systems
+
+choice
+	prompt "Gumstix Carrier/Expansion Board"
+	depends on ARCH_GUMSTIX
+
+config GUMSTIX_AM200EPD
+	bool "Enable AM200EPD board support"
+
+config GUMSTIX_AM300EPD
+	bool "Enable AM300EPD board support"
+
+endchoice
+
+config MACH_INTELMOTE2
+	bool "Intel Mote 2 Platform"
+	select IWMMXT
+	select PXA27x
+
+config MACH_STARGATE2
+	bool "Intel Stargate 2 Platform"
+	select IWMMXT
+	select PXA27x
+
+config MACH_XCEP
+	bool "Iskratel Electronics XCEP"
+	select MTD
+	select MTD_CFI
+	select MTD_CFI_INTELEXT
+	select MTD_PHYSMAP
+	select PXA25x
+	help
+	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+	  Tuned for usage in Libera instruments for particle accelerators.
+
+config TRIZEPS_PXA
+	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+
+config MACH_TRIZEPS4
+	bool "Keith und Koep Trizeps4 DIMM-Module"
+	depends on TRIZEPS_PXA
+	select PXA27x
+	select TRIZEPS_PCMCIA
+
+config MACH_TRIZEPS4WL
+	bool "Keith und Koep Trizeps4-WL DIMM-Module"
+	depends on TRIZEPS_PXA
+	select MACH_TRIZEPS4
+	select PXA27x
+	select TRIZEPS_PCMCIA
+
+choice
+	prompt "Select base board for Trizeps module"
+	depends on TRIZEPS_PXA
+
+config MACH_TRIZEPS_CONXS
+	bool "ConXS Eval Board"
+
+config MACH_TRIZEPS_UCONXS
+	bool "uConXS Eval Board"
+
+config MACH_TRIZEPS_ANY
+	bool "another Board"
+
+endchoice
+
+config ARCOM_PCMCIA
+	bool
+	help
+	  Generic option for Arcom Viper/Zeus PCMCIA
+
+config TRIZEPS_PCMCIA
+	bool
+	help
+	  Enable PCMCIA support for Trizeps modules
+
+config MACH_LOGICPD_PXA270
+	bool "LogicPD PXA270 Card Engine Development Platform"
+	select PXA27x
+
+config MACH_PCM027
+	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+	select IWMMXT
+	select PXA27x
+
+config MACH_PCM990_BASEBOARD
+	bool "PHYTEC PCM-990 development board"
+	depends on MACH_PCM027
+
+choice
+	prompt "display on pcm990"
+	depends on MACH_PCM990_BASEBOARD
+
+config PCM990_DISPLAY_SHARP
+	bool "sharp lq084v1dg21 stn display"
+
+config PCM990_DISPLAY_NEC
+	bool "nec nl6448bc20_18d tft display"
+
+config PCM990_DISPLAY_NONE
+	bool "no display"
+
+endchoice
+
+config MACH_COLIBRI
+	bool "Toradex Colibri PXA270"
+	select PXA27x
+
+config MACH_COLIBRI_PXA270_INCOME
+	bool "Income s.r.o. PXA270 SBC"
+	depends on MACH_COLIBRI
+	select PXA27x
+
+config MACH_COLIBRI300
+	bool "Toradex Colibri PXA300/310"
+	select CPU_PXA300
+	select CPU_PXA310
+	select PXA3xx
+
+config MACH_COLIBRI320
+	bool "Toradex Colibri PXA320"
+	select CPU_PXA320
+	select PXA3xx
+
+config MACH_COLIBRI_EVALBOARD
+	bool "Toradex Colibri Evaluation Carrier Board support"
+	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
+
+config MACH_VPAC270
+	bool "Voipac PXA270"
+	select HAVE_PATA_PLATFORM
+	select PXA27x
+	help
+	  PXA270 based Single Board Computer.
+
+comment "End-user Products (sorted by vendor name)"
+
+config MACH_H4700
+	bool "HP iPAQ hx4700"
+	select IWMMXT
+	select PXA27x
+
+config MACH_H5000
+	bool "HP iPAQ h5000"
+	select PXA25x
+
+config MACH_HIMALAYA
+	bool "HTC Himalaya Support"
+	select CPU_PXA26x
+
+config MACH_MAGICIAN
+	bool "Enable HTC Magician Support"
+	select IWMMXT
+	select PXA27x
+
+config MACH_MIOA701
+	bool "Mitac Mio A701 Support"
+	select GPIO_SYSFS
+	select IWMMXT
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on a
+	  MIO A701. Currently there is only basic support
+	  for this PDA.
+
+config PXA_EZX
+	bool "Motorola EZX Platform"
+	select IWMMXT
+	select PXA27x
+
+config MACH_EZX_A780
+	bool "Motorola EZX A780"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E680
+	bool "Motorola EZX E680"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A1200
+	bool "Motorola EZX A1200"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A910
+	bool "Motorola EZX A910"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E6
+	bool "Motorola EZX E6"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E2
+	bool "Motorola EZX E2"
+	default y
+	depends on PXA_EZX
+
+config MACH_MP900C
+	bool "Nec Mobilepro 900/c"
+	select PXA25x
+
+config ARCH_PXA_PALM
+	bool "PXA based Palm PDAs"
+
+config MACH_PALM27X
+	bool
+
+config MACH_PALMTE2
+	bool "Palm Tungsten|E2"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
+	  handheld computer.
+
+config MACH_PALMTC
+	bool "Palm Tungsten|C"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
+	  handheld computer.
+
+config MACH_PALMT5
+	bool "Palm Tungsten|T5"
+	default y
+	depends on ARCH_PXA_PALM
+	select IWMMXT
+	select MACH_PALM27X
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+	  handheld computer.
+
+config MACH_PALMTX
+	bool "Palm T|X"
+	default y
+	depends on ARCH_PXA_PALM
+	select IWMMXT
+	select MACH_PALM27X
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on a Palm T|X
+	  handheld computer.
+
+config MACH_PALMZ72
+	bool "Palm Zire 72"
+	default y
+	depends on ARCH_PXA_PALM
+	select IWMMXT
+	select MACH_PALM27X
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on Palm Zire 72
+	  handheld computer.
+
+config MACH_PALMLD
+	bool "Palm LifeDrive"
+	default y
+	depends on ARCH_PXA_PALM
+	select IWMMXT
+	select MACH_PALM27X
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on a Palm LifeDrive
+	  handheld computer.
+
+config PALM_TREO
+	bool
+	depends on ARCH_PXA_PALM
+
+config MACH_CENTRO
+	bool "Palm Centro 685 (GSM)"
+	default y
+	depends on ARCH_PXA_PALM
+	select IWMMXT
+	select MACH_PALM27X
+	select PALM_TREO
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
+	  smartphone.
+
+config MACH_TREO680
+	bool "Palm Treo 680"
+	default y
+	depends on ARCH_PXA_PALM
+	select IWMMXT
+	select MACH_PALM27X
+	select PALM_TREO
+	select PXA27x
+	help
+	  Say Y here if you intend to run this kernel on Palm Treo 680
+	  smartphone.
+
+config MACH_RAUMFELD_RC
+	bool "Raumfeld Controller"
+	select CPU_PXA300
+	select POWER_SUPPLY
+	select PXA3xx
+
+config MACH_RAUMFELD_CONNECTOR
+	bool "Raumfeld Connector"
+	select CPU_PXA300
+	select POWER_SUPPLY
+	select PXA3xx
+
+config MACH_RAUMFELD_SPEAKER
+	bool "Raumfeld Speaker"
+	select CPU_PXA300
+	select POWER_SUPPLY
+	select PXA3xx
+
+config PXA_SHARPSL
+	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
+	select SHARP_PARAM
+	select SHARP_SCOOP
+	help
+	  Say Y here if you intend to run this kernel on a
+	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
+	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
+	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
+	  handheld computer.
+
+config PXA_SHARPSL_DETECT_MACH_ID
+	bool "Detect machine ID at run-time in the decompressor"
+	depends on PXA_SHARPSL
+	help
+	  Say Y here if you want the zImage decompressor to detect
+	  the Zaurus machine ID at run-time. For latest kexec-based
+	  boot loader, this is not necessary.
+
+config MACH_POODLE
+	bool "Enable Sharp SL-5600 (Poodle) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select SHARP_LOCOMO
+
+config MACH_CORGI
+	bool "Enable Sharp SL-C700 (Corgi) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+	bool "Enable Sharp SL-C750 (Shepherd) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+	bool "Enable Sharp SL-C760 (Husky) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_AKITA
+	bool "Enable Sharp SL-1000 (Akita) Support"
+	depends on PXA_SHARPSL
+	select I2C
+	select I2C_PXA
+	select MACH_SPITZ
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_SPITZ
+	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+
+config TOSA_BT
+	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+	depends on MACH_TOSA
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on tosa.
+
+config TOSA_USE_EXT_KEYCODES
+	bool "Tosa keyboard: use extended keycodes"
+	depends on MACH_TOSA
+	default n
+	help
+	  Say Y here to enable the tosa keyboard driver to generate extended
+	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+	  by either console keyboard driver or by Kdrive keybd driver.
+
+	  Say Y only if you know, what you are doing!
+
+config MACH_ICONTROL
+	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
+	select CPU_PXA320
+	select PXA3xx
+
+config ARCH_PXA_ESERIES
+	bool "PXA based Toshiba e-series PDAs"
+	select FB_W100
+	select PXA25x
+
+config MACH_E330
+	bool "Toshiba e330"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e330 family PDA.
+
+config MACH_E350
+	bool "Toshiba e350"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e350 family PDA.
+
+config MACH_E740
+	bool "Toshiba e740"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e740 family PDA.
+
+config MACH_E750
+	bool "Toshiba e750"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e750 family PDA.
+
+config MACH_E400
+	bool "Toshiba e400"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e400 family PDA.
+
+config MACH_E800
+	bool "Toshiba e800"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e800 family PDA.
+
+config MACH_ZIPIT2
+	bool "Zipit Z2 Handheld"
+	select PXA27x
+endmenu
+
+config PXA25x
+	bool
+	select CPU_XSCALE
+	help
+	  Select code specific to PXA21x/25x/26x variants
+
+config PXA27x
+	bool
+	select CPU_XSCALE
+	help
+	  Select code specific to PXA27x variants
+
+config CPU_PXA26x
+	bool
+	select PXA25x
+	help
+	  Select code specific to PXA26x (codename Dalhart)
+
+config PXA3xx
+	bool
+	select CPU_XSC3
+	help
+	  Select code specific to PXA3xx variants
+
+config CPU_PXA300
+	bool
+	select PXA3xx
+	help
+	  PXA300 (codename Monahans-L)
+
+config CPU_PXA310
+	bool
+	select CPU_PXA300
+	select PXA310_ULPI if USB_ULPI
+	help
+	  PXA310 (codename Monahans-LV)
+
+config CPU_PXA320
+	bool
+	select PXA3xx
+	help
+	  PXA320 (codename Monahans-P)
+
+config CPU_PXA930
+	bool
+	select PXA3xx
+	help
+	  PXA930 (codename Tavor-P)
+
+config CPU_PXA935
+	bool
+	select CPU_PXA930
+	help
+	  PXA935 (codename Tavor-P65)
+
+config PXA_SHARP_C7xx
+	bool
+	select SHARPSL_PM
+	help
+	  Enable support for all Sharp C7xx models
+
+config PXA_SHARP_Cxx00
+	bool
+	select SHARPSL_PM
+	help
+	  Enable common support for Sharp Cxx00 models
+
+config SHARPSL_PM
+	bool
+	select APM_EMULATION
+	select SHARPSL_PM_MAX1111
+
+config SHARPSL_PM_MAX1111
+	bool
+	select HWMON
+	select SENSORS_MAX1111
+	select SPI
+	select SPI_MASTER
+
+config PXA_HAVE_ISA_IRQS
+	bool
+
+config PXA310_ULPI
+	bool
+
+endif