Fixed MTP to work with TWRP

2025-09-10 01:12:45 -04:00 · 2018-06-19 23:16:04 +02:00 · 2018-06-19 23:16:04 +02:00 · f6dfaef42e
commit f6dfaef42e
50820 changed files with 20846062 additions and 0 deletions
--- a/arch/arm/mach-spear/spear3xx.c
+++ b/arch/arm/mach-spear/spear3xx.c
@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-spear3xx/spear3xx.c
+ *
+ * SPEAr3XX machines common source file
+ *
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr3xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl080.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <asm/mach/map.h>
+#include "pl080.h"
+#include "generic.h"
+#include <mach/spear.h>
+#include <mach/misc_regs.h>
+
+/* ssp device registration */
+struct pl022_ssp_controller pl022_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 1,
+	.dma_filter = pl08x_filter_id,
+	.dma_tx_param = "ssp0_tx",
+	.dma_rx_param = "ssp0_rx",
+	/*
+	 * This is number of spi devices that can be connected to spi. There are
+	 * two type of chipselects on which slave devices can work. One is chip
+	 * select provided by spi masters other is controlled through external
+	 * gpio's. We can't use chipselect provided from spi master (because as
+	 * soon as FIFO becomes empty, CS is disabled and transfer ends). So
+	 * this number now depends on number of gpios available for spi. each
+	 * slave on each master requires a separate gpio pin.
+	 */
+	.num_chipselect = 2,
+};
+
+/* dmac device registration */
+struct pl08x_platform_data pl080_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl_memcpy =
+			(PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_xfer_signal = pl080_get_signal,
+	.put_xfer_signal = pl080_put_signal,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xD0000000		0xFD000000
+ * 0xFC000000		0xFC000000
+ */
+struct map_desc spear3xx_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long)VA_SPEAR_ICM1_2_BASE,
+		.pfn		= __phys_to_pfn(SPEAR_ICM1_2_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear3xx_map_io(void)
+{
+	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
+}
+
+void __init spear3xx_timer_init(void)
+{
+	char pclk_name[] = "pll3_clk";
+	struct clk *gpt_clk, *pclk;
+
+	spear3xx_clk_init(MISC_BASE, VA_SPEAR320_SOC_CONFIG_BASE);
+
+	/* get the system timer clock */
+	gpt_clk = clk_get_sys("gpt0", NULL);
+	if (IS_ERR(gpt_clk)) {
+		pr_err("%s:couldn't get clk for gpt\n", __func__);
+		BUG();
+	}
+
+	/* get the suitable parent clock for timer*/
+	pclk = clk_get(NULL, pclk_name);
+	if (IS_ERR(pclk)) {
+		pr_err("%s:couldn't get %s as parent for gpt\n",
+				__func__, pclk_name);
+		BUG();
+	}
+
+	clk_set_parent(gpt_clk, pclk);
+	clk_put(gpt_clk);
+	clk_put(pclk);
+
+	spear_setup_of_timer();
+}