Fixed MTP to work with TWRP

This commit is contained in:
awab228 2018-06-19 23:16:04 +02:00
commit f6dfaef42e
50820 changed files with 20846062 additions and 0 deletions

View file

@ -0,0 +1,57 @@
#
# Copyright (C) 2004-2006 Atmel Corporation
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
extra-y := vmlinux.bin vmlinux.gz
OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
UIMAGE_LOADADDR = $(CONFIG_LOAD_ADDRESS)
UIMAGE_ENTRYADDR = $(CONFIG_ENTRY_ADDRESS)
UIMAGE_COMPRESSION = gzip
targets += uImage uImage.srec
$(obj)/uImage: $(obj)/vmlinux.gz
$(call if_changed,uimage)
@echo ' Image $@ is ready'
OBJCOPYFLAGS_uImage.srec := -I binary -O srec
$(obj)/uImage.srec: $(obj)/uImage
$(call if_changed,objcopy)
OBJCOPYFLAGS_vmlinux.elf := --change-section-lma .text-0x80000000 \
--change-section-lma __ex_table-0x80000000 \
--change-section-lma .rodata-0x80000000 \
--change-section-lma .data-0x80000000 \
--change-section-lma .init-0x80000000 \
--change-section-lma .bss-0x80000000 \
--change-section-lma __param-0x80000000 \
--change-section-lma __ksymtab-0x80000000 \
--change-section-lma __ksymtab_gpl-0x80000000 \
--change-section-lma __kcrctab-0x80000000 \
--change-section-lma __kcrctab_gpl-0x80000000 \
--change-section-lma __ksymtab_strings-0x80000000 \
--set-start 0xa0000000
$(obj)/vmlinux.elf: vmlinux FORCE
$(call if_changed,objcopy)
quiet_cmd_sfdwarf = SFDWARF $@
cmd_sfdwarf = sfdwarf $< TO $@ GNUAVR IW $(SFDWARF_FLAGS) > $(obj)/sfdwarf.log
$(obj)/vmlinux.cso: $(obj)/vmlinux.elf FORCE
$(call if_changed,sfdwarf)
install: $(BOOTIMAGE)
sh $(srctree)/install-kernel.sh $<
# Generated files to be removed upon make clean
clean-files := vmlinux.elf vmlinux.bin vmlinux.gz uImage uImage.srec

View file

@ -0,0 +1,3 @@
extra-y := head.o
obj-y := empty.o

View file

@ -0,0 +1 @@
/* Empty file */

View file

@ -0,0 +1,83 @@
/*
* Startup code for use with the u-boot bootloader.
*
* Copyright (C) 2004-2006 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <asm/setup.h>
#include <asm/thread_info.h>
#include <asm/sysreg.h>
/*
* The kernel is loaded where we want it to be and all caches
* have just been flushed. We get two parameters from u-boot:
*
* r12 contains a magic number (ATAG_MAGIC)
* r11 points to a tag table providing information about
* the system.
*/
.section .init.text,"ax"
.global _start
_start:
/* Initialize .bss */
lddpc r2, bss_start_addr
lddpc r3, end_addr
mov r0, 0
mov r1, 0
1: st.d r2++, r0
cp r2, r3
brlo 1b
/* Initialize status register */
lddpc r0, init_sr
mtsr SYSREG_SR, r0
/* Set initial stack pointer */
lddpc sp, stack_addr
sub sp, -THREAD_SIZE
#ifdef CONFIG_FRAME_POINTER
/* Mark last stack frame */
mov lr, 0
mov r7, 0
#endif
/* Check if the boot loader actually provided a tag table */
lddpc r0, magic_number
cp.w r12, r0
brne no_tag_table
/*
* Save the tag table address for later use. This must be done
* _after_ .bss has been initialized...
*/
lddpc r0, tag_table_addr
st.w r0[0], r11
/* Jump to loader-independent setup code */
rjmp kernel_entry
.align 2
magic_number:
.long ATAG_MAGIC
tag_table_addr:
.long bootloader_tags
bss_start_addr:
.long __bss_start
end_addr:
.long _end
init_sr:
.long 0x007f0000 /* Supervisor mode, everything masked */
stack_addr:
.long init_thread_union
panic_addr:
.long panic
no_tag_table:
sub r12, pc, (. - 2f)
/* branch to panic() which can be far away with that construct */
lddpc pc, panic_addr
2: .asciz "Boot loader didn't provide correct magic number\n"