Fixed MTP to work with TWRP

arch/microblaze/pci/Makefile

@@ -0,0 +1,6 @@
+#
+# Makefile
+#
+
+obj-$(CONFIG_PCI)		+= pci-common.o indirect_pci.o iomap.o
+obj-$(CONFIG_PCI_XILINX)	+= xilinx_pci.o

arch/microblaze/pci/indirect_pci.c

@@ -0,0 +1,163 @@
+/*
+ * Support for indirect PCI bridges.
+ *
+ * Copyright (C) 1998 Gabriel Paubert.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+
+#include <linux/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+static int
+indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		     int len, u32 *val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	volatile void __iomem *cfg_data;
+	u8 cfg_type = 0;
+	u32 bus_no, reg;
+
+	if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
+		if (bus->number != hose->first_busno)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		if (devfn != 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
+		if (bus->number != hose->first_busno)
+			cfg_type = 1;
+
+	bus_no = (bus->number == hose->first_busno) ?
+			hose->self_busno : bus->number;
+
+	if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
+		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
+	else
+		reg = offset & 0xfc; /* Only 3 bits for function */
+
+	if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
+		out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+	else
+		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + (offset & 3); /* Only 3 bits for function */
+	switch (len) {
+	case 1:
+		*val = in_8(cfg_data);
+		break;
+	case 2:
+		*val = in_le16(cfg_data);
+		break;
+	default:
+		*val = in_le32(cfg_data);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		      int len, u32 val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	volatile void __iomem *cfg_data;
+	u8 cfg_type = 0;
+	u32 bus_no, reg;
+
+	if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
+		if (bus->number != hose->first_busno)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		if (devfn != 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
+		if (bus->number != hose->first_busno)
+			cfg_type = 1;
+
+	bus_no = (bus->number == hose->first_busno) ?
+			hose->self_busno : bus->number;
+
+	if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
+		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
+	else
+		reg = offset & 0xfc;
+
+	if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
+		out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+	else
+		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+
+	/* suppress setting of PCI_PRIMARY_BUS */
+	if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
+		if ((offset == PCI_PRIMARY_BUS) &&
+			(bus->number == hose->first_busno))
+			val &= 0xffffff00;
+
+	/* Workaround for PCI_28 Errata in 440EPx/GRx */
+	if ((hose->indirect_type & INDIRECT_TYPE_BROKEN_MRM) &&
+			offset == PCI_CACHE_LINE_SIZE) {
+		val = 0;
+	}
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + (offset & 3);
+	switch (len) {
+	case 1:
+		out_8(cfg_data, val);
+		break;
+	case 2:
+		out_le16(cfg_data, val);
+		break;
+	default:
+		out_le32(cfg_data, val);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops indirect_pci_ops = {
+	.read = indirect_read_config,
+	.write = indirect_write_config,
+};
+
+void __init
+setup_indirect_pci(struct pci_controller *hose,
+		   resource_size_t cfg_addr,
+		   resource_size_t cfg_data, u32 flags)
+{
+	resource_size_t base = cfg_addr & PAGE_MASK;
+	void __iomem *mbase;
+
+	mbase = ioremap(base, PAGE_SIZE);
+	hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK);
+	if ((cfg_data & PAGE_MASK) != base)
+		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
+	hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK);
+	hose->ops = &indirect_pci_ops;
+	hose->indirect_type = flags;
+}

arch/microblaze/pci/iomap.c

@@ -0,0 +1,21 @@
+/*
+ * ppc64 "iomap" interface implementation.
+ *
+ * (C) Copyright 2004 Linus Torvalds
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/mm.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <asm/pci-bridge.h>
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+	if (isa_vaddr_is_ioport(addr))
+		return;
+	if (pcibios_vaddr_is_ioport(addr))
+		return;
+	iounmap(addr);
+}
+EXPORT_SYMBOL(pci_iounmap);

arch/microblaze/pci/xilinx_pci.c

@@ -0,0 +1,169 @@
+/*
+ * PCI support for Xilinx plbv46_pci soft-core which can be used on
+ * Xilinx Virtex ML410 / ML510 boards.
+ *
+ * Copyright 2009 Roderick Colenbrander
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ *
+ * The pci bridge fixup code was copied from ppc4xx_pci.c and was written
+ * by Benjamin Herrenschmidt.
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+
+#define XPLB_PCI_ADDR 0x10c
+#define XPLB_PCI_DATA 0x110
+#define XPLB_PCI_BUS  0x114
+
+#define PCI_HOST_ENABLE_CMD (PCI_COMMAND_SERR | PCI_COMMAND_PARITY | \
+				PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY)
+
+static struct of_device_id xilinx_pci_match[] = {
+	{ .compatible = "xlnx,plbv46-pci-1.03.a", },
+	{}
+};
+
+/**
+ * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration.
+ */
+static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
+{
+	struct pci_controller *hose;
+	int i;
+
+	if (dev->devfn || dev->bus->self)
+		return;
+
+	hose = pci_bus_to_host(dev->bus);
+	if (!hose)
+		return;
+
+	if (!of_match_node(xilinx_pci_match, hose->dn))
+		return;
+
+	/* Hide the PCI host BARs from the kernel as their content doesn't
+	 * fit well in the resource management
+	 */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		dev->resource[i].start = 0;
+		dev->resource[i].end = 0;
+		dev->resource[i].flags = 0;
+	}
+
+	dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n",
+		 pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge);
+
+#ifdef DEBUG
+/**
+ * xilinx_pci_exclude_device - Don't do config access for non-root bus
+ *
+ * This is a hack.  Config access to any bus other than bus 0 does not
+ * currently work on the ML510 so we prevent it here.
+ */
+static int
+xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn)
+{
+	return (bus != 0);
+}
+
+/**
+ * xilinx_early_pci_scan - List pci config space for available devices
+ *
+ * List pci devices in very early phase.
+ */
+static void __init xilinx_early_pci_scan(struct pci_controller *hose)
+{
+	u32 bus = 0;
+	u32 val, dev, func, offset;
+
+	/* Currently we have only 2 device connected - up-to 32 devices */
+	for (dev = 0; dev < 2; dev++) {
+		/* List only first function number - up-to 8 functions */
+		for (func = 0; func < 1; func++) {
+			pr_info("%02x:%02x:%02x", bus, dev, func);
+			/* read the first 64 standardized bytes */
+			/* Up-to 192 bytes can be list of capabilities */
+			for (offset = 0; offset < 64; offset += 4) {
+				early_read_config_dword(hose, bus,
+					PCI_DEVFN(dev, func), offset, &val);
+				if (offset == 0 && val == 0xFFFFFFFF) {
+					pr_cont("\nABSENT");
+					break;
+				}
+				if (!(offset % 0x10))
+					pr_cont("\n%04x:    ", offset);
+
+				pr_cont("%08x  ", val);
+			}
+			pr_info("\n");
+		}
+	}
+}
+#else
+static void __init xilinx_early_pci_scan(struct pci_controller *hose)
+{
+}
+#endif
+
+/**
+ * xilinx_pci_init - Find and register a Xilinx PCI host bridge
+ */
+void __init xilinx_pci_init(void)
+{
+	struct pci_controller *hose;
+	struct resource r;
+	void __iomem *pci_reg;
+	struct device_node *pci_node;
+
+	pci_node = of_find_matching_node(NULL, xilinx_pci_match);
+	if (!pci_node)
+		return;
+
+	if (of_address_to_resource(pci_node, 0, &r)) {
+		pr_err("xilinx-pci: cannot resolve base address\n");
+		return;
+	}
+
+	hose = pcibios_alloc_controller(pci_node);
+	if (!hose) {
+		pr_err("xilinx-pci: pcibios_alloc_controller() failed\n");
+		return;
+	}
+
+	/* Setup config space */
+	setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
+			   r.start + XPLB_PCI_DATA,
+			   INDIRECT_TYPE_SET_CFG_TYPE);
+
+	/* According to the xilinx plbv46_pci documentation the soft-core starts
+	 * a self-init when the bus master enable bit is set. Without this bit
+	 * set the pci bus can't be scanned.
+	 */
+	early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
+
+	/* Set the max latency timer to 255 */
+	early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
+
+	/* Set the max bus number to 255, and bus/subbus no's to 0 */
+	pci_reg = of_iomap(pci_node, 0);
+	out_be32(pci_reg + XPLB_PCI_BUS, 0x000000ff);
+	iounmap(pci_reg);
+
+	/* Register the host bridge with the linux kernel! */
+	pci_process_bridge_OF_ranges(hose, pci_node,
+					INDIRECT_TYPE_SET_CFG_TYPE);
+
+	pr_info("xilinx-pci: Registered PCI host bridge\n");
+	xilinx_early_pci_scan(hose);
+}