Fixed MTP to work with TWRP

2025-09-10 09:22:44 -04:00 · 2018-06-19 23:16:04 +02:00 · 2018-06-19 23:16:04 +02:00 · f6dfaef42e
commit f6dfaef42e
50820 changed files with 20846062 additions and 0 deletions
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@ -0,0 +1,773 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ *
+ * Helper functions to abstract board specific data about
+ * network ports from the rest of the cvmx-helper files.
+ */
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-bootinfo.h>
+
+#include <asm/octeon/cvmx-config.h>
+
+#include <asm/octeon/cvmx-mdio.h>
+
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-helper-util.h>
+#include <asm/octeon/cvmx-helper-board.h>
+
+#include <asm/octeon/cvmx-gmxx-defs.h>
+#include <asm/octeon/cvmx-asxx-defs.h>
+
+/**
+ * cvmx_override_board_link_get(int ipd_port) is a function
+ * pointer. It is meant to allow customization of the process of
+ * talking to a PHY to determine link speed. It is called every
+ * time a PHY must be polled for link status. Users should set
+ * this pointer to a function before calling any cvmx-helper
+ * operations.
+ */
+cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port) =
+    NULL;
+
+/**
+ * Return the MII PHY address associated with the given IPD
+ * port. A result of -1 means there isn't a MII capable PHY
+ * connected to this port. On chips supporting multiple MII
+ * busses the bus number is encoded in bits <15:8>.
+ *
+ * This function must be modified for every new Octeon board.
+ * Internally it uses switch statements based on the cvmx_sysinfo
+ * data to determine board types and revisions. It replies on the
+ * fact that every Octeon board receives a unique board type
+ * enumeration from the bootloader.
+ *
+ * @ipd_port: Octeon IPD port to get the MII address for.
+ *
+ * Returns MII PHY address and bus number or -1.
+ */
+int cvmx_helper_board_get_mii_address(int ipd_port)
+{
+	switch (cvmx_sysinfo_get()->board_type) {
+	case CVMX_BOARD_TYPE_SIM:
+		/* Simulator doesn't have MII */
+		return -1;
+	case CVMX_BOARD_TYPE_EBT3000:
+	case CVMX_BOARD_TYPE_EBT5800:
+	case CVMX_BOARD_TYPE_THUNDER:
+	case CVMX_BOARD_TYPE_NICPRO2:
+		/* Interface 0 is SPI4, interface 1 is RGMII */
+		if ((ipd_port >= 16) && (ipd_port < 20))
+			return ipd_port - 16;
+		else
+			return -1;
+	case CVMX_BOARD_TYPE_KODAMA:
+	case CVMX_BOARD_TYPE_EBH3100:
+	case CVMX_BOARD_TYPE_HIKARI:
+	case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
+	case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
+	case CVMX_BOARD_TYPE_CN3020_EVB_HS5:
+		/*
+		 * Port 0 is WAN connected to a PHY, Port 1 is GMII
+		 * connected to a switch
+		 */
+		if (ipd_port == 0)
+			return 4;
+		else if (ipd_port == 1)
+			return 9;
+		else
+			return -1;
+	case CVMX_BOARD_TYPE_NAC38:
+		/* Board has 8 RGMII ports PHYs are 0-7 */
+		if ((ipd_port >= 0) && (ipd_port < 4))
+			return ipd_port;
+		else if ((ipd_port >= 16) && (ipd_port < 20))
+			return ipd_port - 16 + 4;
+		else
+			return -1;
+	case CVMX_BOARD_TYPE_EBH3000:
+		/* Board has dual SPI4 and no PHYs */
+		return -1;
+	case CVMX_BOARD_TYPE_EBH5200:
+	case CVMX_BOARD_TYPE_EBH5201:
+	case CVMX_BOARD_TYPE_EBT5200:
+		/* Board has 2 management ports */
+		if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) &&
+		    (ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2)))
+			return ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT;
+		/*
+		 * Board has 4 SGMII ports. The PHYs start right after the MII
+		 * ports MII0 = 0, MII1 = 1, SGMII = 2-5.
+		 */
+		if ((ipd_port >= 0) && (ipd_port < 4))
+			return ipd_port + 2;
+		else
+			return -1;
+	case CVMX_BOARD_TYPE_EBH5600:
+	case CVMX_BOARD_TYPE_EBH5601:
+	case CVMX_BOARD_TYPE_EBH5610:
+		/* Board has 1 management port */
+		if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
+			return 0;
+		/*
+		 * Board has 8 SGMII ports. 4 connect out, two connect
+		 * to a switch, and 2 loop to each other
+		 */
+		if ((ipd_port >= 0) && (ipd_port < 4))
+			return ipd_port + 1;
+		else
+			return -1;
+	case CVMX_BOARD_TYPE_CUST_NB5:
+		if (ipd_port == 2)
+			return 4;
+		else
+			return -1;
+	case CVMX_BOARD_TYPE_NIC_XLE_4G:
+		/* Board has 4 SGMII ports. connected QLM3(interface 1) */
+		if ((ipd_port >= 16) && (ipd_port < 20))
+			return ipd_port - 16 + 1;
+		else
+			return -1;
+	case CVMX_BOARD_TYPE_NIC_XLE_10G:
+	case CVMX_BOARD_TYPE_NIC10E:
+		return -1;
+	case CVMX_BOARD_TYPE_NIC4E:
+		if (ipd_port >= 0 && ipd_port <= 3)
+			return (ipd_port + 0x1f) & 0x1f;
+		else
+			return -1;
+	case CVMX_BOARD_TYPE_NIC2E:
+		if (ipd_port >= 0 && ipd_port <= 1)
+			return ipd_port + 1;
+		else
+			return -1;
+	case CVMX_BOARD_TYPE_BBGW_REF:
+		/*
+		 * No PHYs are connected to Octeon, everything is
+		 * through switch.
+		 */
+		return -1;
+
+	case CVMX_BOARD_TYPE_CUST_WSX16:
+		if (ipd_port >= 0 && ipd_port <= 3)
+			return ipd_port;
+		else if (ipd_port >= 16 && ipd_port <= 19)
+			return ipd_port - 16 + 4;
+		else
+			return -1;
+	case CVMX_BOARD_TYPE_UBNT_E100:
+		if (ipd_port >= 0 && ipd_port <= 2)
+			return 7 - ipd_port;
+		else
+			return -1;
+	case CVMX_BOARD_TYPE_CUST_DSR1000N:
+		/*
+		 * Port 2 connects to Broadcom PHY (B5081). Other ports (0-1)
+		 * connect to a switch (BCM53115).
+		 */
+		if (ipd_port == 2)
+			return 8;
+		else
+			return -1;
+	}
+
+	/* Some unknown board. Somebody forgot to update this function... */
+	cvmx_dprintf
+	    ("cvmx_helper_board_get_mii_address: Unknown board type %d\n",
+	     cvmx_sysinfo_get()->board_type);
+	return -1;
+}
+
+/**
+ * This function is the board specific method of determining an
+ * ethernet ports link speed. Most Octeon boards have Marvell PHYs
+ * and are handled by the fall through case. This function must be
+ * updated for boards that don't have the normal Marvell PHYs.
+ *
+ * This function must be modified for every new Octeon board.
+ * Internally it uses switch statements based on the cvmx_sysinfo
+ * data to determine board types and revisions. It relies on the
+ * fact that every Octeon board receives a unique board type
+ * enumeration from the bootloader.
+ *
+ * @ipd_port: IPD input port associated with the port we want to get link
+ *		   status for.
+ *
+ * Returns The ports link status. If the link isn't fully resolved, this must
+ *	   return zero.
+ */
+cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
+{
+	cvmx_helper_link_info_t result;
+	int phy_addr;
+	int is_broadcom_phy = 0;
+
+	/* Give the user a chance to override the processing of this function */
+	if (cvmx_override_board_link_get)
+		return cvmx_override_board_link_get(ipd_port);
+
+	/* Unless we fix it later, all links are defaulted to down */
+	result.u64 = 0;
+
+	/*
+	 * This switch statement should handle all ports that either don't use
+	 * Marvell PHYS, or don't support in-band status.
+	 */
+	switch (cvmx_sysinfo_get()->board_type) {
+	case CVMX_BOARD_TYPE_SIM:
+		/* The simulator gives you a simulated 1Gbps full duplex link */
+		result.s.link_up = 1;
+		result.s.full_duplex = 1;
+		result.s.speed = 1000;
+		return result;
+	case CVMX_BOARD_TYPE_EBH3100:
+	case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
+	case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
+	case CVMX_BOARD_TYPE_CN3020_EVB_HS5:
+		/* Port 1 on these boards is always Gigabit */
+		if (ipd_port == 1) {
+			result.s.link_up = 1;
+			result.s.full_duplex = 1;
+			result.s.speed = 1000;
+			return result;
+		}
+		/* Fall through to the generic code below */
+		break;
+	case CVMX_BOARD_TYPE_CUST_NB5:
+		/* Port 1 on these boards is always Gigabit */
+		if (ipd_port == 1) {
+			result.s.link_up = 1;
+			result.s.full_duplex = 1;
+			result.s.speed = 1000;
+			return result;
+		} else		/* The other port uses a broadcom PHY */
+			is_broadcom_phy = 1;
+		break;
+	case CVMX_BOARD_TYPE_BBGW_REF:
+		/* Port 1 on these boards is always Gigabit */
+		if (ipd_port == 2) {
+			/* Port 2 is not hooked up */
+			result.u64 = 0;
+			return result;
+		} else {
+			/* Ports 0 and 1 connect to the switch */
+			result.s.link_up = 1;
+			result.s.full_duplex = 1;
+			result.s.speed = 1000;
+			return result;
+		}
+		break;
+	case CVMX_BOARD_TYPE_CUST_DSR1000N:
+		if (ipd_port == 0 || ipd_port == 1) {
+			/* Ports 0 and 1 connect to a switch (BCM53115). */
+			result.s.link_up = 1;
+			result.s.full_duplex = 1;
+			result.s.speed = 1000;
+			return result;
+		} else {
+			/* Port 2 uses a Broadcom PHY (B5081). */
+			is_broadcom_phy = 1;
+		}
+		break;
+	}
+
+	phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
+	if (phy_addr != -1) {
+		if (is_broadcom_phy) {
+			/*
+			 * Below we are going to read SMI/MDIO
+			 * register 0x19 which works on Broadcom
+			 * parts
+			 */
+			int phy_status =
+			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+					   0x19);
+			switch ((phy_status >> 8) & 0x7) {
+			case 0:
+				result.u64 = 0;
+				break;
+			case 1:
+				result.s.link_up = 1;
+				result.s.full_duplex = 0;
+				result.s.speed = 10;
+				break;
+			case 2:
+				result.s.link_up = 1;
+				result.s.full_duplex = 1;
+				result.s.speed = 10;
+				break;
+			case 3:
+				result.s.link_up = 1;
+				result.s.full_duplex = 0;
+				result.s.speed = 100;
+				break;
+			case 4:
+				result.s.link_up = 1;
+				result.s.full_duplex = 1;
+				result.s.speed = 100;
+				break;
+			case 5:
+				result.s.link_up = 1;
+				result.s.full_duplex = 1;
+				result.s.speed = 100;
+				break;
+			case 6:
+				result.s.link_up = 1;
+				result.s.full_duplex = 0;
+				result.s.speed = 1000;
+				break;
+			case 7:
+				result.s.link_up = 1;
+				result.s.full_duplex = 1;
+				result.s.speed = 1000;
+				break;
+			}
+		} else {
+			/*
+			 * This code assumes we are using a Marvell
+			 * Gigabit PHY. All the speed information can
+			 * be read from register 17 in one
+			 * go. Somebody using a different PHY will
+			 * need to handle it above in the board
+			 * specific area.
+			 */
+			int phy_status =
+			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17);
+
+			/*
+			 * If the resolve bit 11 isn't set, see if
+			 * autoneg is turned off (bit 12, reg 0). The
+			 * resolve bit doesn't get set properly when
+			 * autoneg is off, so force it.
+			 */
+			if ((phy_status & (1 << 11)) == 0) {
+				int auto_status =
+				    cvmx_mdio_read(phy_addr >> 8,
+						   phy_addr & 0xff, 0);
+				if ((auto_status & (1 << 12)) == 0)
+					phy_status |= 1 << 11;
+			}
+
+			/*
+			 * Only return a link if the PHY has finished
+			 * auto negotiation and set the resolved bit
+			 * (bit 11)
+			 */
+			if (phy_status & (1 << 11)) {
+				result.s.link_up = 1;
+				result.s.full_duplex = ((phy_status >> 13) & 1);
+				switch ((phy_status >> 14) & 3) {
+				case 0: /* 10 Mbps */
+					result.s.speed = 10;
+					break;
+				case 1: /* 100 Mbps */
+					result.s.speed = 100;
+					break;
+				case 2: /* 1 Gbps */
+					result.s.speed = 1000;
+					break;
+				case 3: /* Illegal */
+					result.u64 = 0;
+					break;
+				}
+			}
+		}
+	} else if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
+		   || OCTEON_IS_MODEL(OCTEON_CN58XX)
+		   || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
+		/*
+		 * We don't have a PHY address, so attempt to use
+		 * in-band status. It is really important that boards
+		 * not supporting in-band status never get
+		 * here. Reading broken in-band status tends to do bad
+		 * things
+		 */
+		union cvmx_gmxx_rxx_rx_inbnd inband_status;
+		int interface = cvmx_helper_get_interface_num(ipd_port);
+		int index = cvmx_helper_get_interface_index_num(ipd_port);
+		inband_status.u64 =
+		    cvmx_read_csr(CVMX_GMXX_RXX_RX_INBND(index, interface));
+
+		result.s.link_up = inband_status.s.status;
+		result.s.full_duplex = inband_status.s.duplex;
+		switch (inband_status.s.speed) {
+		case 0: /* 10 Mbps */
+			result.s.speed = 10;
+			break;
+		case 1: /* 100 Mbps */
+			result.s.speed = 100;
+			break;
+		case 2: /* 1 Gbps */
+			result.s.speed = 1000;
+			break;
+		case 3: /* Illegal */
+			result.u64 = 0;
+			break;
+		}
+	} else {
+		/*
+		 * We don't have a PHY address and we don't have
+		 * in-band status. There is no way to determine the
+		 * link speed. Return down assuming this port isn't
+		 * wired
+		 */
+		result.u64 = 0;
+	}
+
+	/* If link is down, return all fields as zero. */
+	if (!result.s.link_up)
+		result.u64 = 0;
+
+	return result;
+}
+
+/**
+ * This function as a board specific method of changing the PHY
+ * speed, duplex, and auto-negotiation. This programs the PHY and
+ * not Octeon. This can be used to force Octeon's links to
+ * specific settings.
+ *
+ * @phy_addr:  The address of the PHY to program
+ * @enable_autoneg:
+ *		    Non zero if you want to enable auto-negotiation.
+ * @link_info: Link speed to program. If the speed is zero and auto-negotiation
+ *		    is enabled, all possible negotiation speeds are advertised.
+ *
+ * Returns Zero on success, negative on failure
+ */
+int cvmx_helper_board_link_set_phy(int phy_addr,
+				   cvmx_helper_board_set_phy_link_flags_types_t
+				   link_flags,
+				   cvmx_helper_link_info_t link_info)
+{
+
+	/* Set the flow control settings based on link_flags */
+	if ((link_flags & set_phy_link_flags_flow_control_mask) !=
+	    set_phy_link_flags_flow_control_dont_touch) {
+		cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
+		reg_autoneg_adver.u16 =
+		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+				   CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
+		reg_autoneg_adver.s.asymmetric_pause =
+		    (link_flags & set_phy_link_flags_flow_control_mask) ==
+		    set_phy_link_flags_flow_control_enable;
+		reg_autoneg_adver.s.pause =
+		    (link_flags & set_phy_link_flags_flow_control_mask) ==
+		    set_phy_link_flags_flow_control_enable;
+		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+				CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
+				reg_autoneg_adver.u16);
+	}
+
+	/* If speed isn't set and autoneg is on advertise all supported modes */
+	if ((link_flags & set_phy_link_flags_autoneg)
+	    && (link_info.s.speed == 0)) {
+		cvmx_mdio_phy_reg_control_t reg_control;
+		cvmx_mdio_phy_reg_status_t reg_status;
+		cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
+		cvmx_mdio_phy_reg_extended_status_t reg_extended_status;
+		cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
+
+		reg_status.u16 =
+		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+				   CVMX_MDIO_PHY_REG_STATUS);
+		reg_autoneg_adver.u16 =
+		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+				   CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
+		reg_autoneg_adver.s.advert_100base_t4 =
+		    reg_status.s.capable_100base_t4;
+		reg_autoneg_adver.s.advert_10base_tx_full =
+		    reg_status.s.capable_10_full;
+		reg_autoneg_adver.s.advert_10base_tx_half =
+		    reg_status.s.capable_10_half;
+		reg_autoneg_adver.s.advert_100base_tx_full =
+		    reg_status.s.capable_100base_x_full;
+		reg_autoneg_adver.s.advert_100base_tx_half =
+		    reg_status.s.capable_100base_x_half;
+		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+				CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
+				reg_autoneg_adver.u16);
+		if (reg_status.s.capable_extended_status) {
+			reg_extended_status.u16 =
+			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+					   CVMX_MDIO_PHY_REG_EXTENDED_STATUS);
+			reg_control_1000.u16 =
+			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+					   CVMX_MDIO_PHY_REG_CONTROL_1000);
+			reg_control_1000.s.advert_1000base_t_full =
+			    reg_extended_status.s.capable_1000base_t_full;
+			reg_control_1000.s.advert_1000base_t_half =
+			    reg_extended_status.s.capable_1000base_t_half;
+			cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+					CVMX_MDIO_PHY_REG_CONTROL_1000,
+					reg_control_1000.u16);
+		}
+		reg_control.u16 =
+		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+				   CVMX_MDIO_PHY_REG_CONTROL);
+		reg_control.s.autoneg_enable = 1;
+		reg_control.s.restart_autoneg = 1;
+		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+				CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
+	} else if ((link_flags & set_phy_link_flags_autoneg)) {
+		cvmx_mdio_phy_reg_control_t reg_control;
+		cvmx_mdio_phy_reg_status_t reg_status;
+		cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
+		cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
+
+		reg_status.u16 =
+		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+				   CVMX_MDIO_PHY_REG_STATUS);
+		reg_autoneg_adver.u16 =
+		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+				   CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
+		reg_autoneg_adver.s.advert_100base_t4 = 0;
+		reg_autoneg_adver.s.advert_10base_tx_full = 0;
+		reg_autoneg_adver.s.advert_10base_tx_half = 0;
+		reg_autoneg_adver.s.advert_100base_tx_full = 0;
+		reg_autoneg_adver.s.advert_100base_tx_half = 0;
+		if (reg_status.s.capable_extended_status) {
+			reg_control_1000.u16 =
+			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+					   CVMX_MDIO_PHY_REG_CONTROL_1000);
+			reg_control_1000.s.advert_1000base_t_full = 0;
+			reg_control_1000.s.advert_1000base_t_half = 0;
+		}
+		switch (link_info.s.speed) {
+		case 10:
+			reg_autoneg_adver.s.advert_10base_tx_full =
+			    link_info.s.full_duplex;
+			reg_autoneg_adver.s.advert_10base_tx_half =
+			    !link_info.s.full_duplex;
+			break;
+		case 100:
+			reg_autoneg_adver.s.advert_100base_tx_full =
+			    link_info.s.full_duplex;
+			reg_autoneg_adver.s.advert_100base_tx_half =
+			    !link_info.s.full_duplex;
+			break;
+		case 1000:
+			reg_control_1000.s.advert_1000base_t_full =
+			    link_info.s.full_duplex;
+			reg_control_1000.s.advert_1000base_t_half =
+			    !link_info.s.full_duplex;
+			break;
+		}
+		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+				CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
+				reg_autoneg_adver.u16);
+		if (reg_status.s.capable_extended_status)
+			cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+					CVMX_MDIO_PHY_REG_CONTROL_1000,
+					reg_control_1000.u16);
+		reg_control.u16 =
+		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+				   CVMX_MDIO_PHY_REG_CONTROL);
+		reg_control.s.autoneg_enable = 1;
+		reg_control.s.restart_autoneg = 1;
+		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+				CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
+	} else {
+		cvmx_mdio_phy_reg_control_t reg_control;
+		reg_control.u16 =
+		    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+				   CVMX_MDIO_PHY_REG_CONTROL);
+		reg_control.s.autoneg_enable = 0;
+		reg_control.s.restart_autoneg = 1;
+		reg_control.s.duplex = link_info.s.full_duplex;
+		if (link_info.s.speed == 1000) {
+			reg_control.s.speed_msb = 1;
+			reg_control.s.speed_lsb = 0;
+		} else if (link_info.s.speed == 100) {
+			reg_control.s.speed_msb = 0;
+			reg_control.s.speed_lsb = 1;
+		} else if (link_info.s.speed == 10) {
+			reg_control.s.speed_msb = 0;
+			reg_control.s.speed_lsb = 0;
+		}
+		cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+				CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
+	}
+	return 0;
+}
+
+/**
+ * This function is called by cvmx_helper_interface_probe() after it
+ * determines the number of ports Octeon can support on a specific
+ * interface. This function is the per board location to override
+ * this value. It is called with the number of ports Octeon might
+ * support and should return the number of actual ports on the
+ * board.
+ *
+ * This function must be modifed for every new Octeon board.
+ * Internally it uses switch statements based on the cvmx_sysinfo
+ * data to determine board types and revisions. It relys on the
+ * fact that every Octeon board receives a unique board type
+ * enumeration from the bootloader.
+ *
+ * @interface: Interface to probe
+ * @supported_ports:
+ *		    Number of ports Octeon supports.
+ *
+ * Returns Number of ports the actual board supports. Many times this will
+ *	   simple be "support_ports".
+ */
+int __cvmx_helper_board_interface_probe(int interface, int supported_ports)
+{
+	switch (cvmx_sysinfo_get()->board_type) {
+	case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
+		if (interface == 0)
+			return 2;
+		break;
+	case CVMX_BOARD_TYPE_BBGW_REF:
+		if (interface == 0)
+			return 2;
+		break;
+	case CVMX_BOARD_TYPE_NIC_XLE_4G:
+		if (interface == 0)
+			return 0;
+		break;
+		/* The 2nd interface on the EBH5600 is connected to the Marvel switch,
+		   which we don't support. Disable ports connected to it */
+	case CVMX_BOARD_TYPE_EBH5600:
+		if (interface == 1)
+			return 0;
+		break;
+	}
+	return supported_ports;
+}
+
+/**
+ * Enable packet input/output from the hardware. This function is
+ * called after by cvmx_helper_packet_hardware_enable() to
+ * perform board specific initialization. For most boards
+ * nothing is needed.
+ *
+ * @interface: Interface to enable
+ *
+ * Returns Zero on success, negative on failure
+ */
+int __cvmx_helper_board_hardware_enable(int interface)
+{
+	if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5) {
+		if (interface == 0) {
+			/* Different config for switch port */
+			cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0);
+			cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
+			/*
+			 * Boards with gigabit WAN ports need a
+			 * different setting that is compatible with
+			 * 100 Mbit settings
+			 */
+			cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface),
+				       0xc);
+			cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface),
+				       0xc);
+		}
+	} else if (cvmx_sysinfo_get()->board_type ==
+		   CVMX_BOARD_TYPE_CN3010_EVB_HS5) {
+		/*
+		 * Broadcom PHYs require differnet ASX
+		 * clocks. Unfortunately many boards don't define a
+		 * new board Id and simply mangle the
+		 * CN3010_EVB_HS5
+		 */
+		if (interface == 0) {
+			/*
+			 * Some boards use a hacked up bootloader that
+			 * identifies them as CN3010_EVB_HS5
+			 * evaluation boards.  This leads to all kinds
+			 * of configuration problems.  Detect one
+			 * case, and print warning, while trying to do
+			 * the right thing.
+			 */
+			int phy_addr = cvmx_helper_board_get_mii_address(0);
+			if (phy_addr != -1) {
+				int phy_identifier =
+				    cvmx_mdio_read(phy_addr >> 8,
+						   phy_addr & 0xff, 0x2);
+				/* Is it a Broadcom PHY? */
+				if (phy_identifier == 0x0143) {
+					cvmx_dprintf("\n");
+					cvmx_dprintf("ERROR:\n");
+					cvmx_dprintf
+					    ("ERROR: Board type is CVMX_BOARD_TYPE_CN3010_EVB_HS5, but Broadcom PHY found.\n");
+					cvmx_dprintf
+					    ("ERROR: The board type is mis-configured, and software malfunctions are likely.\n");
+					cvmx_dprintf
+					    ("ERROR: All boards require a unique board type to identify them.\n");
+					cvmx_dprintf("ERROR:\n");
+					cvmx_dprintf("\n");
+					cvmx_wait(1000000000);
+					cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX
+						       (0, interface), 5);
+					cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX
+						       (0, interface), 5);
+				}
+			}
+		}
+	} else if (cvmx_sysinfo_get()->board_type ==
+			CVMX_BOARD_TYPE_UBNT_E100) {
+		cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0);
+		cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10);
+		cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
+		cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0x10);
+		cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(2, interface), 0);
+		cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(2, interface), 0x10);
+	}
+	return 0;
+}
+
+/**
+ * Get the clock type used for the USB block based on board type.
+ * Used by the USB code for auto configuration of clock type.
+ *
+ * Return USB clock type enumeration
+ */
+enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(void)
+{
+	switch (cvmx_sysinfo_get()->board_type) {
+	case CVMX_BOARD_TYPE_BBGW_REF:
+	case CVMX_BOARD_TYPE_LANAI2_A:
+	case CVMX_BOARD_TYPE_LANAI2_U:
+	case CVMX_BOARD_TYPE_LANAI2_G:
+	case CVMX_BOARD_TYPE_NIC10E_66:
+	case CVMX_BOARD_TYPE_UBNT_E100:
+	case CVMX_BOARD_TYPE_CUST_DSR1000N:
+		return USB_CLOCK_TYPE_CRYSTAL_12;
+	case CVMX_BOARD_TYPE_NIC10E:
+		return USB_CLOCK_TYPE_REF_12;
+	default:
+		break;
+	}
+	/* Most boards except NIC10e use a 12MHz crystal */
+	if (OCTEON_IS_MODEL(OCTEON_FAM_2))
+		return USB_CLOCK_TYPE_CRYSTAL_12;
+	return USB_CLOCK_TYPE_REF_48;
+}