Fixed MTP to work with TWRP

arch/mips/pmcs-msp71xx/Kconfig

@@ -0,0 +1,49 @@
+choice
+	prompt "PMC-Sierra MSP SOC type"
+	depends on PMC_MSP
+
+config PMC_MSP4200_EVAL
+	bool "PMC-Sierra MSP4200 Eval Board"
+	select IRQ_MSP_SLP
+	select HW_HAS_PCI
+	select MIPS_L1_CACHE_SHIFT_4
+
+config PMC_MSP4200_GW
+	bool "PMC-Sierra MSP4200 VoIP Gateway"
+	select IRQ_MSP_SLP
+	select HW_HAS_PCI
+
+config PMC_MSP7120_EVAL
+	bool "PMC-Sierra MSP7120 Eval Board"
+	select SYS_SUPPORTS_MULTITHREADING
+	select IRQ_MSP_CIC
+	select HW_HAS_PCI
+
+config PMC_MSP7120_GW
+	bool "PMC-Sierra MSP7120 Residential Gateway"
+	select SYS_SUPPORTS_MULTITHREADING
+	select IRQ_MSP_CIC
+	select HW_HAS_PCI
+	select MSP_HAS_USB
+	select MSP_ETH
+
+config PMC_MSP7120_FPGA
+	bool "PMC-Sierra MSP7120 FPGA"
+	select SYS_SUPPORTS_MULTITHREADING
+	select IRQ_MSP_CIC
+	select HW_HAS_PCI
+
+endchoice
+
+config MSP_HAS_USB
+	boolean
+	depends on PMC_MSP
+
+config MSP_ETH
+	boolean
+	select MSP_HAS_MAC
+	depends on PMC_MSP
+
+config MSP_HAS_MAC
+	boolean
+	depends on PMC_MSP

arch/mips/pmcs-msp71xx/Makefile

@@ -0,0 +1,12 @@
+#
+# Makefile for the PMC-Sierra MSP SOCs
+#
+obj-y += msp_prom.o msp_setup.o msp_irq.o \
+	 msp_time.o msp_serial.o msp_elb.o
+obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o
+obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o
+obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o
+obj-$(CONFIG_PCI) += msp_pci.o
+obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o
+obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o
+obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o

arch/mips/pmcs-msp71xx/Platform

@@ -0,0 +1,7 @@
+#
+# PMC-Sierra MSP SOCs
+#
+platform-$(CONFIG_PMC_MSP)	+= pmcs-msp71xx/
+cflags-$(CONFIG_PMC_MSP)	+= -I$(srctree)/arch/mips/include/asm/mach-pmcs-msp71xx \
+					-mno-branch-likely
+load-$(CONFIG_PMC_MSP)		+= 0xffffffff80100000

arch/mips/pmcs-msp71xx/msp_elb.c

@@ -0,0 +1,46 @@
+/*
+ * Sets up the proper Chip Select configuration registers.  It is assumed that
+ * PMON sets up the ADDR and MASK registers properly.
+ *
+ * Copyright 2005-2006 PMC-Sierra, Inc.
+ * Author: Marc St-Jean, Marc_St-Jean@pmc-sierra.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <msp_regs.h>
+
+static int __init msp_elb_setup(void)
+{
+#if defined(CONFIG_PMC_MSP7120_GW) \
+ || defined(CONFIG_PMC_MSP7120_EVAL)
+	/*
+	 * Force all CNFG to be identical and equal to CS0,
+	 * according to OPS doc
+	 */
+	*CS1_CNFG_REG = *CS2_CNFG_REG = *CS3_CNFG_REG = *CS0_CNFG_REG;
+#endif
+	return 0;
+}
+
+subsys_initcall(msp_elb_setup);

arch/mips/pmcs-msp71xx/msp_eth.c

@@ -0,0 +1,111 @@
+/*
+ * The setup file for ethernet related hardware on PMC-Sierra MSP processors.
+ *
+ * Copyright 2010 PMC-Sierra, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <msp_regs.h>
+#include <msp_int.h>
+#include <msp_gpio_macros.h>
+
+
+#define MSP_ETHERNET_GPIO0	14
+#define MSP_ETHERNET_GPIO1	15
+#define MSP_ETHERNET_GPIO2	16
+
+#define MSP_ETH_ID	"pmc_mspeth"
+#define MSP_ETH_SIZE	0xE0
+static struct resource msp_eth0_resources[] = {
+	[0] = {
+		.start	= MSP_MAC0_BASE,
+		.end	= MSP_MAC0_BASE + MSP_ETH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= MSP_INT_MAC0,
+		.end	= MSP_INT_MAC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msp_eth1_resources[] = {
+	[0] = {
+		.start	= MSP_MAC1_BASE,
+		.end	= MSP_MAC1_BASE + MSP_ETH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= MSP_INT_MAC1,
+		.end	= MSP_INT_MAC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+
+static struct platform_device mspeth_device[] = {
+	[0] = {
+		.name	= MSP_ETH_ID,
+		.id	= 0,
+		.num_resources = ARRAY_SIZE(msp_eth0_resources),
+		.resource = msp_eth0_resources,
+	},
+	[1] = {
+		.name	= MSP_ETH_ID,
+		.id	= 1,
+		.num_resources = ARRAY_SIZE(msp_eth1_resources),
+		.resource = msp_eth1_resources,
+	},
+
+};
+#define msp_eth_devs	mspeth_device
+
+int __init msp_eth_setup(void)
+{
+	int i, ret = 0;
+
+	/* Configure the GPIO and take the ethernet PHY out of reset */
+	msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0);
+	msp_gpio_pin_hi(MSP_ETHERNET_GPIO0);
+
+	for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) {
+		ret = platform_device_register(&msp_eth_devs[i]);
+		printk(KERN_INFO "device: %d, return value = %d\n", i, ret);
+		if (ret) {
+			platform_device_unregister(&msp_eth_devs[i]);
+			break;
+		}
+	}
+
+	if (ret)
+		printk(KERN_WARNING "Could not initialize "
+						"MSPETH device structures.\n");
+
+	return ret;
+}
+subsys_initcall(msp_eth_setup);

arch/mips/pmcs-msp71xx/msp_hwbutton.c

@@ -0,0 +1,165 @@
+/*
+ * Sets up interrupt handlers for various hardware switches which are
+ * connected to interrupt lines.
+ *
+ * Copyright 2005-2207 PMC-Sierra, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include <msp_int.h>
+#include <msp_regs.h>
+#include <msp_regops.h>
+
+/* For hwbutton_interrupt->initial_state */
+#define HWBUTTON_HI	0x1
+#define HWBUTTON_LO	0x2
+
+/*
+ * This struct describes a hardware button
+ */
+struct hwbutton_interrupt {
+	char *name;			/* Name of button */
+	int irq;			/* Actual LINUX IRQ */
+	int eirq;			/* Extended IRQ number (0-7) */
+	int initial_state;		/* The "normal" state of the switch */
+	void (*handle_hi)(void *);	/* Handler: switch input has gone HI */
+	void (*handle_lo)(void *);	/* Handler: switch input has gone LO */
+	void *data;			/* Optional data to pass to handler */
+};
+
+#ifdef CONFIG_PMC_MSP7120_GW
+extern void msp_restart(char *);
+
+static void softreset_push(void *data)
+{
+	printk(KERN_WARNING "SOFTRESET switch was pushed\n");
+
+	/*
+	 * In the future you could move this to the release handler,
+	 * timing the difference between the 'push' and 'release', and only
+	 * doing this ungraceful restart if the button has been down for
+	 * a certain amount of time; otherwise doing a graceful restart.
+	 */
+
+	msp_restart(NULL);
+}
+
+static void softreset_release(void *data)
+{
+	printk(KERN_WARNING "SOFTRESET switch was released\n");
+
+	/* Do nothing */
+}
+
+static void standby_on(void *data)
+{
+	printk(KERN_WARNING "STANDBY switch was set to ON (not implemented)\n");
+
+	/* TODO: Put board in standby mode */
+}
+
+static void standby_off(void *data)
+{
+	printk(KERN_WARNING
+		"STANDBY switch was set to OFF (not implemented)\n");
+
+	/* TODO: Take out of standby mode */
+}
+
+static struct hwbutton_interrupt softreset_sw = {
+	.name = "Softreset button",
+	.irq = MSP_INT_EXT0,
+	.eirq = 0,
+	.initial_state = HWBUTTON_HI,
+	.handle_hi = softreset_release,
+	.handle_lo = softreset_push,
+	.data = NULL,
+};
+
+static struct hwbutton_interrupt standby_sw = {
+	.name = "Standby switch",
+	.irq = MSP_INT_EXT1,
+	.eirq = 1,
+	.initial_state = HWBUTTON_HI,
+	.handle_hi = standby_off,
+	.handle_lo = standby_on,
+	.data = NULL,
+};
+#endif /* CONFIG_PMC_MSP7120_GW */
+
+static irqreturn_t hwbutton_handler(int irq, void *data)
+{
+	struct hwbutton_interrupt *hirq = data;
+	unsigned long cic_ext = *CIC_EXT_CFG_REG;
+
+	if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) {
+		/* Interrupt: pin is now HI */
+		CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
+		hirq->handle_hi(hirq->data);
+	} else {
+		/* Interrupt: pin is now LO */
+		CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq);
+		hirq->handle_lo(hirq->data);
+	}
+
+	/*
+	 * Invert the POLARITY of this level interrupt to ack the interrupt
+	 * Thus next state change will invoke the opposite message
+	 */
+	*CIC_EXT_CFG_REG = cic_ext;
+
+	return IRQ_HANDLED;
+}
+
+static int msp_hwbutton_register(struct hwbutton_interrupt *hirq)
+{
+	unsigned long cic_ext;
+
+	if (hirq->handle_hi == NULL || hirq->handle_lo == NULL)
+		return -EINVAL;
+
+	cic_ext = *CIC_EXT_CFG_REG;
+	CIC_EXT_SET_TRIGGER_LEVEL(cic_ext, hirq->eirq);
+	if (hirq->initial_state == HWBUTTON_HI)
+		CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
+	else
+		CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq);
+	*CIC_EXT_CFG_REG = cic_ext;
+
+	return request_irq(hirq->irq, hwbutton_handler, 0,
+			   hirq->name, hirq);
+}
+
+static int __init msp_hwbutton_setup(void)
+{
+#ifdef CONFIG_PMC_MSP7120_GW
+	msp_hwbutton_register(&softreset_sw);
+	msp_hwbutton_register(&standby_sw);
+#endif
+	return 0;
+}
+
+subsys_initcall(msp_hwbutton_setup);

arch/mips/pmcs-msp71xx/msp_irq.c

@@ -0,0 +1,159 @@
+/*
+ * IRQ vector handles
+ *
+ * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/time.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/setup.h>
+
+#include <msp_int.h>
+
+/* SLP bases systems */
+extern void msp_slp_irq_init(void);
+extern void msp_slp_irq_dispatch(void);
+
+/* CIC based systems */
+extern void msp_cic_irq_init(void);
+extern void msp_cic_irq_dispatch(void);
+
+/* VSMP support init */
+extern void msp_vsmp_int_init(void);
+
+/* vectored interrupt implementation */
+
+/* SW0/1 interrupts are used for SMP  */
+static inline void mac0_int_dispatch(void) { do_IRQ(MSP_INT_MAC0); }
+static inline void mac1_int_dispatch(void) { do_IRQ(MSP_INT_MAC1); }
+static inline void mac2_int_dispatch(void) { do_IRQ(MSP_INT_SAR); }
+static inline void usb_int_dispatch(void)  { do_IRQ(MSP_INT_USB);  }
+static inline void sec_int_dispatch(void)  { do_IRQ(MSP_INT_SEC);  }
+
+/*
+ * The PMC-Sierra MSP interrupts are arranged in a 3 level cascaded
+ * hierarchical system.	 The first level are the direct MIPS interrupts
+ * and are assigned the interrupt range 0-7.  The second level is the SLM
+ * interrupt controller and is assigned the range 8-39.	 The third level
+ * comprises the Peripherial block, the PCI block, the PCI MSI block and
+ * the SLP.  The PCI interrupts and the SLP errors are handled by the
+ * relevant subsystems so the core interrupt code needs only concern
+ * itself with the Peripheral block.  These are assigned interrupts in
+ * the range 40-71.
+ */
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	u32 pending;
+
+	pending = read_c0_status() & read_c0_cause();
+
+	/*
+	 * jump to the correct interrupt routine
+	 * These are arranged in priority order and the timer
+	 * comes first!
+	 */
+
+#ifdef CONFIG_IRQ_MSP_CIC	/* break out the CIC stuff for now */
+	if (pending & C_IRQ4)	/* do the peripherals first, that's the timer */
+		msp_cic_irq_dispatch();
+
+	else if (pending & C_IRQ0)
+		do_IRQ(MSP_INT_MAC0);
+
+	else if (pending & C_IRQ1)
+		do_IRQ(MSP_INT_MAC1);
+
+	else if (pending & C_IRQ2)
+		do_IRQ(MSP_INT_USB);
+
+	else if (pending & C_IRQ3)
+		do_IRQ(MSP_INT_SAR);
+
+	else if (pending & C_IRQ5)
+		do_IRQ(MSP_INT_SEC);
+
+#else
+	if (pending & C_IRQ5)
+		do_IRQ(MSP_INT_TIMER);
+
+	else if (pending & C_IRQ0)
+		do_IRQ(MSP_INT_MAC0);
+
+	else if (pending & C_IRQ1)
+		do_IRQ(MSP_INT_MAC1);
+
+	else if (pending & C_IRQ3)
+		do_IRQ(MSP_INT_VE);
+
+	else if (pending & C_IRQ4)
+		msp_slp_irq_dispatch();
+#endif
+
+	else if (pending & C_SW0)	/* do software after hardware */
+		do_IRQ(MSP_INT_SW0);
+
+	else if (pending & C_SW1)
+		do_IRQ(MSP_INT_SW1);
+}
+
+static struct irqaction cic_cascade_msp = {
+	.handler = no_action,
+	.name	 = "MSP CIC cascade",
+	.flags	 = IRQF_NO_THREAD,
+};
+
+static struct irqaction per_cascade_msp = {
+	.handler = no_action,
+	.name	 = "MSP PER cascade",
+	.flags	 = IRQF_NO_THREAD,
+};
+
+void __init arch_init_irq(void)
+{
+	/* assume we'll be using vectored interrupt mode except in UP mode*/
+#ifdef CONFIG_MIPS_MT
+	BUG_ON(!cpu_has_vint);
+#endif
+	/* initialize the 1st-level CPU based interrupt controller */
+	mips_cpu_irq_init();
+
+#ifdef CONFIG_IRQ_MSP_CIC
+	msp_cic_irq_init();
+#ifdef CONFIG_MIPS_MT
+	set_vi_handler(MSP_INT_CIC, msp_cic_irq_dispatch);
+	set_vi_handler(MSP_INT_MAC0, mac0_int_dispatch);
+	set_vi_handler(MSP_INT_MAC1, mac1_int_dispatch);
+	set_vi_handler(MSP_INT_SAR, mac2_int_dispatch);
+	set_vi_handler(MSP_INT_USB, usb_int_dispatch);
+	set_vi_handler(MSP_INT_SEC, sec_int_dispatch);
+#ifdef CONFIG_MIPS_MT_SMP
+	msp_vsmp_int_init();
+#endif	/* CONFIG_MIPS_MT_SMP */
+#endif	/* CONFIG_MIPS_MT */
+	/* setup the cascaded interrupts */
+	setup_irq(MSP_INT_CIC, &cic_cascade_msp);
+	setup_irq(MSP_INT_PER, &per_cascade_msp);
+
+#else
+	/*
+	 * Setup the 2nd-level SLP register based interrupt controller.
+	 * VSMP support support is not enabled for SLP.
+	 */
+	msp_slp_irq_init();
+
+	/* setup the cascaded SLP/PER interrupts */
+	setup_irq(MSP_INT_SLP, &cic_cascade_msp);
+	setup_irq(MSP_INT_PER, &per_cascade_msp);
+#endif
+}

arch/mips/pmcs-msp71xx/msp_irq_cic.c

@@ -0,0 +1,211 @@
+/*
+ * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
+ *
+ * This file define the irq handler for MSP CIC subsystem interrupts.
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/irq.h>
+
+#include <asm/mipsregs.h>
+
+#include <msp_cic_int.h>
+#include <msp_regs.h>
+
+/*
+ * External API
+ */
+extern void msp_per_irq_init(void);
+extern void msp_per_irq_dispatch(void);
+
+
+/*
+ * Convenience Macro.  Should be somewhere generic.
+ */
+#define get_current_vpe()   \
+	((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
+
+#ifdef CONFIG_SMP
+
+#define LOCK_VPE(flags, mtflags) \
+do {				\
+	local_irq_save(flags);	\
+	mtflags = dmt();	\
+} while (0)
+
+#define UNLOCK_VPE(flags, mtflags) \
+do {				\
+	emt(mtflags);		\
+	local_irq_restore(flags);\
+} while (0)
+
+#define LOCK_CORE(flags, mtflags) \
+do {				\
+	local_irq_save(flags);	\
+	mtflags = dvpe();	\
+} while (0)
+
+#define UNLOCK_CORE(flags, mtflags)		\
+do {				\
+	evpe(mtflags);		\
+	local_irq_restore(flags);\
+} while (0)
+
+#else
+
+#define LOCK_VPE(flags, mtflags)
+#define UNLOCK_VPE(flags, mtflags)
+#endif
+
+/* ensure writes to cic are completed */
+static inline void cic_wmb(void)
+{
+	const volatile void __iomem *cic_mem = CIC_VPE0_MSK_REG;
+	volatile u32 dummy_read;
+
+	wmb();
+	dummy_read = __raw_readl(cic_mem);
+	dummy_read++;
+}
+
+static void unmask_cic_irq(struct irq_data *d)
+{
+	volatile u32   *cic_msk_reg = CIC_VPE0_MSK_REG;
+	int vpe;
+#ifdef CONFIG_SMP
+	unsigned int mtflags;
+	unsigned long  flags;
+
+	/*
+	* Make sure we have IRQ affinity.  It may have changed while
+	* we were processing the IRQ.
+	*/
+	if (!cpumask_test_cpu(smp_processor_id(), d->affinity))
+		return;
+#endif
+
+	vpe = get_current_vpe();
+	LOCK_VPE(flags, mtflags);
+	cic_msk_reg[vpe] |= (1 << (d->irq - MSP_CIC_INTBASE));
+	UNLOCK_VPE(flags, mtflags);
+	cic_wmb();
+}
+
+static void mask_cic_irq(struct irq_data *d)
+{
+	volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG;
+	int	vpe = get_current_vpe();
+#ifdef CONFIG_SMP
+	unsigned long flags, mtflags;
+#endif
+	LOCK_VPE(flags, mtflags);
+	cic_msk_reg[vpe] &= ~(1 << (d->irq - MSP_CIC_INTBASE));
+	UNLOCK_VPE(flags, mtflags);
+	cic_wmb();
+}
+static void msp_cic_irq_ack(struct irq_data *d)
+{
+	mask_cic_irq(d);
+	/*
+	* Only really necessary for 18, 16-14 and sometimes 3:0
+	* (since these can be edge sensitive) but it doesn't
+	* hurt for the others
+	*/
+	*CIC_STS_REG = (1 << (d->irq - MSP_CIC_INTBASE));
+}
+
+/* Note: Limiting to VSMP.  */
+
+#ifdef CONFIG_MIPS_MT_SMP
+static int msp_cic_irq_set_affinity(struct irq_data *d,
+				    const struct cpumask *cpumask, bool force)
+{
+	int cpu;
+	unsigned long flags;
+	unsigned int  mtflags;
+	unsigned long imask = (1 << (d->irq - MSP_CIC_INTBASE));
+	volatile u32 *cic_mask = (volatile u32 *)CIC_VPE0_MSK_REG;
+
+	/* timer balancing should be disabled in kernel code */
+	BUG_ON(d->irq == MSP_INT_VPE0_TIMER || d->irq == MSP_INT_VPE1_TIMER);
+
+	LOCK_CORE(flags, mtflags);
+	/* enable if any of each VPE's TCs require this IRQ */
+	for_each_online_cpu(cpu) {
+		if (cpumask_test_cpu(cpu, cpumask))
+			cic_mask[cpu] |= imask;
+		else
+			cic_mask[cpu] &= ~imask;
+
+	}
+
+	UNLOCK_CORE(flags, mtflags);
+	return 0;
+
+}
+#endif
+
+static struct irq_chip msp_cic_irq_controller = {
+	.name = "MSP_CIC",
+	.irq_mask = mask_cic_irq,
+	.irq_mask_ack = msp_cic_irq_ack,
+	.irq_unmask = unmask_cic_irq,
+	.irq_ack = msp_cic_irq_ack,
+#ifdef CONFIG_MIPS_MT_SMP
+	.irq_set_affinity = msp_cic_irq_set_affinity,
+#endif
+};
+
+void __init msp_cic_irq_init(void)
+{
+	int i;
+	/* Mask/clear interrupts. */
+	*CIC_VPE0_MSK_REG = 0x00000000;
+	*CIC_VPE1_MSK_REG = 0x00000000;
+	*CIC_STS_REG	  = 0xFFFFFFFF;
+	/*
+	* The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI.
+	* These inputs map to EXT_INT_POL[6:4] inside the CIC.
+	* They are to be active low, level sensitive.
+	*/
+	*CIC_EXT_CFG_REG &= 0xFFFF8F8F;
+
+	/* initialize all the IRQ descriptors */
+	for (i = MSP_CIC_INTBASE ; i < MSP_CIC_INTBASE + 32 ; i++) {
+		irq_set_chip_and_handler(i, &msp_cic_irq_controller,
+					 handle_level_irq);
+	}
+
+	/* Initialize the PER interrupt sub-system */
+	 msp_per_irq_init();
+}
+
+/* CIC masked by CIC vector processing before dispatch called */
+void msp_cic_irq_dispatch(void)
+{
+	volatile u32	*cic_msk_reg = (volatile u32 *)CIC_VPE0_MSK_REG;
+	u32	cic_mask;
+	u32	 pending;
+	int	cic_status = *CIC_STS_REG;
+	cic_mask = cic_msk_reg[get_current_vpe()];
+	pending = cic_status & cic_mask;
+	if (pending & (1 << (MSP_INT_VPE0_TIMER - MSP_CIC_INTBASE))) {
+		do_IRQ(MSP_INT_VPE0_TIMER);
+	} else if (pending & (1 << (MSP_INT_VPE1_TIMER - MSP_CIC_INTBASE))) {
+		do_IRQ(MSP_INT_VPE1_TIMER);
+	} else if (pending & (1 << (MSP_INT_PER - MSP_CIC_INTBASE))) {
+		msp_per_irq_dispatch();
+	} else if (pending) {
+		do_IRQ(ffs(pending) + MSP_CIC_INTBASE - 1);
+	} else{
+		spurious_interrupt();
+	}
+}

arch/mips/pmcs-msp71xx/msp_irq_per.c

@@ -0,0 +1,131 @@
+/*
+ * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
+ *
+ * This file define the irq handler for MSP PER subsystem interrupts.
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+
+#include <asm/mipsregs.h>
+
+#include <msp_cic_int.h>
+#include <msp_regs.h>
+
+
+/*
+ * Convenience Macro.  Should be somewhere generic.
+ */
+#define get_current_vpe()	\
+	((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
+
+#ifdef CONFIG_SMP
+/*
+ * The PER registers must be protected from concurrent access.
+ */
+
+static DEFINE_SPINLOCK(per_lock);
+#endif
+
+/* ensure writes to per are completed */
+
+static inline void per_wmb(void)
+{
+	const volatile void __iomem *per_mem = PER_INT_MSK_REG;
+	volatile u32 dummy_read;
+
+	wmb();
+	dummy_read = __raw_readl(per_mem);
+	dummy_read++;
+}
+
+static inline void unmask_per_irq(struct irq_data *d)
+{
+#ifdef CONFIG_SMP
+	unsigned long flags;
+	spin_lock_irqsave(&per_lock, flags);
+	*PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE));
+	spin_unlock_irqrestore(&per_lock, flags);
+#else
+	*PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE));
+#endif
+	per_wmb();
+}
+
+static inline void mask_per_irq(struct irq_data *d)
+{
+#ifdef CONFIG_SMP
+	unsigned long flags;
+	spin_lock_irqsave(&per_lock, flags);
+	*PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE));
+	spin_unlock_irqrestore(&per_lock, flags);
+#else
+	*PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE));
+#endif
+	per_wmb();
+}
+
+static inline void msp_per_irq_ack(struct irq_data *d)
+{
+	mask_per_irq(d);
+	/*
+	 * In the PER interrupt controller, only bits 11 and 10
+	 * are write-to-clear, (SPI TX complete, SPI RX complete).
+	 * It does nothing for any others.
+	 */
+	*PER_INT_STS_REG = (1 << (d->irq - MSP_PER_INTBASE));
+}
+
+#ifdef CONFIG_SMP
+static int msp_per_irq_set_affinity(struct irq_data *d,
+				    const struct cpumask *affinity, bool force)
+{
+	/* WTF is this doing ????? */
+	unmask_per_irq(d);
+	return 0;
+}
+#endif
+
+static struct irq_chip msp_per_irq_controller = {
+	.name = "MSP_PER",
+	.irq_enable = unmask_per_irq,
+	.irq_disable = mask_per_irq,
+	.irq_ack = msp_per_irq_ack,
+#ifdef CONFIG_SMP
+	.irq_set_affinity = msp_per_irq_set_affinity,
+#endif
+};
+
+void __init msp_per_irq_init(void)
+{
+	int i;
+	/* Mask/clear interrupts. */
+	*PER_INT_MSK_REG  = 0x00000000;
+	*PER_INT_STS_REG  = 0xFFFFFFFF;
+	/* initialize all the IRQ descriptors */
+	for (i = MSP_PER_INTBASE; i < MSP_PER_INTBASE + 32; i++) {
+		irq_set_chip(i, &msp_per_irq_controller);
+	}
+}
+
+void msp_per_irq_dispatch(void)
+{
+	u32	per_mask = *PER_INT_MSK_REG;
+	u32	per_status = *PER_INT_STS_REG;
+	u32	pending;
+
+	pending = per_status & per_mask;
+	if (pending) {
+		do_IRQ(ffs(pending) + MSP_PER_INTBASE - 1);
+	} else {
+		spurious_interrupt();
+	}
+}

arch/mips/pmcs-msp71xx/msp_irq_slp.c

@@ -0,0 +1,106 @@
+/*
+ * This file define the irq handler for MSP SLM subsystem interrupts.
+ *
+ * Copyright 2005-2006 PMC-Sierra, Inc, derived from irq_cpu.c
+ * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+
+#include <asm/mipsregs.h>
+
+#include <msp_slp_int.h>
+#include <msp_regs.h>
+
+static inline void unmask_msp_slp_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	/* check for PER interrupt range */
+	if (irq < MSP_PER_INTBASE)
+		*SLP_INT_MSK_REG |= (1 << (irq - MSP_SLP_INTBASE));
+	else
+		*PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE));
+}
+
+static inline void mask_msp_slp_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	/* check for PER interrupt range */
+	if (irq < MSP_PER_INTBASE)
+		*SLP_INT_MSK_REG &= ~(1 << (irq - MSP_SLP_INTBASE));
+	else
+		*PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE));
+}
+
+/*
+ * While we ack the interrupt interrupts are disabled and thus we don't need
+ * to deal with concurrency issues.  Same for msp_slp_irq_end.
+ */
+static inline void ack_msp_slp_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	/* check for PER interrupt range */
+	if (irq < MSP_PER_INTBASE)
+		*SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE));
+	else
+		*PER_INT_STS_REG = (1 << (irq - MSP_PER_INTBASE));
+}
+
+static struct irq_chip msp_slp_irq_controller = {
+	.name = "MSP_SLP",
+	.irq_ack = ack_msp_slp_irq,
+	.irq_mask = mask_msp_slp_irq,
+	.irq_unmask = unmask_msp_slp_irq,
+};
+
+void __init msp_slp_irq_init(void)
+{
+	int i;
+
+	/* Mask/clear interrupts. */
+	*SLP_INT_MSK_REG = 0x00000000;
+	*PER_INT_MSK_REG = 0x00000000;
+	*SLP_INT_STS_REG = 0xFFFFFFFF;
+	*PER_INT_STS_REG = 0xFFFFFFFF;
+
+	/* initialize all the IRQ descriptors */
+	for (i = MSP_SLP_INTBASE; i < MSP_PER_INTBASE + 32; i++)
+		irq_set_chip_and_handler(i, &msp_slp_irq_controller,
+					 handle_level_irq);
+}
+
+void msp_slp_irq_dispatch(void)
+{
+	u32 pending;
+	int intbase;
+
+	intbase = MSP_SLP_INTBASE;
+	pending = *SLP_INT_STS_REG & *SLP_INT_MSK_REG;
+
+	/* check for PER interrupt */
+	if (pending == (1 << (MSP_INT_PER - MSP_SLP_INTBASE))) {
+		intbase = MSP_PER_INTBASE;
+		pending = *PER_INT_STS_REG & *PER_INT_MSK_REG;
+	}
+
+	/* check for spurious interrupt */
+	if (pending == 0x00000000) {
+		printk(KERN_ERR "Spurious %s interrupt?\n",
+			(intbase == MSP_SLP_INTBASE) ? "SLP" : "PER");
+		return;
+	}
+
+	/* dispatch the irq */
+	do_IRQ(ffs(pending) + intbase - 1);
+}

arch/mips/pmcs-msp71xx/msp_pci.c

@@ -0,0 +1,50 @@
+/*
+ * The setup file for PCI related hardware on PMC-Sierra MSP processors.
+ *
+ * Copyright 2005-2006 PMC-Sierra, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+
+#include <msp_prom.h>
+#include <msp_regs.h>
+
+extern void msp_pci_init(void);
+
+static int __init msp_pci_setup(void)
+{
+#if 0 /* Linux 2.6 initialization code to be completed */
+	if (getdeviceid() & DEV_ID_SINGLE_PC) {
+		/* If single card mode */
+		slmRegs *sreg = (slmRegs *) SREG_BASE;
+
+		sreg->single_pc_enable = SINGLE_PCCARD;
+	}
+#endif
+
+	msp_pci_init();
+
+	return 0;
+}
+
+subsys_initcall(msp_pci_setup);

arch/mips/pmcs-msp71xx/msp_prom.c

@@ -0,0 +1,503 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *    PROM library initialisation code, assuming a version of
+ *    pmon is the boot code.
+ *
+ * Copyright 2000,2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ * This file was derived from Carsten Langgaard's
+ * arch/mips/mips-boards/xx files.
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm-generic/sections.h>
+#include <asm/page.h>
+
+#include <msp_prom.h>
+#include <msp_regs.h>
+
+/* global PROM environment variables and pointers */
+int prom_argc;
+char **prom_argv, **prom_envp;
+int *prom_vec;
+
+/* debug flag */
+int init_debug = 1;
+
+/* memory blocks */
+struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+
+/* default feature sets */
+static char msp_default_features[] =
+#if defined(CONFIG_PMC_MSP4200_EVAL) \
+ || defined(CONFIG_PMC_MSP4200_GW)
+	"ERER";
+#elif defined(CONFIG_PMC_MSP7120_EVAL) \
+ || defined(CONFIG_PMC_MSP7120_GW)
+	"EMEMSP";
+#elif defined(CONFIG_PMC_MSP7120_FPGA)
+	"EMEM";
+#endif
+
+/* conversion functions */
+static inline unsigned char str2hexnum(unsigned char c)
+{
+	if (c >= '0' && c <= '9')
+		return c - '0';
+	if (c >= 'a' && c <= 'f')
+		return c - 'a' + 10;
+	return 0; /* foo */
+}
+
+int str2eaddr(unsigned char *ea, unsigned char *str)
+{
+	int index = 0;
+	unsigned char num = 0;
+
+	while (*str != '\0') {
+		if ((*str == '.') || (*str == ':')) {
+			ea[index++] = num;
+			num = 0;
+			str++;
+		} else {
+			num = num << 4;
+			num |= str2hexnum(*str++);
+		}
+	}
+
+	if (index == 5) {
+		ea[index++] = num;
+		return 0;
+	} else
+		return -1;
+}
+EXPORT_SYMBOL(str2eaddr);
+
+static inline unsigned long str2hex(unsigned char *str)
+{
+	int value = 0;
+
+	while (*str) {
+		value = value << 4;
+		value |= str2hexnum(*str++);
+	}
+
+	return value;
+}
+
+/* function to query the system information */
+const char *get_system_type(void)
+{
+#if defined(CONFIG_PMC_MSP4200_EVAL)
+	return "PMC-Sierra MSP4200 Eval Board";
+#elif defined(CONFIG_PMC_MSP4200_GW)
+	return "PMC-Sierra MSP4200 VoIP Gateway";
+#elif defined(CONFIG_PMC_MSP7120_EVAL)
+	return "PMC-Sierra MSP7120 Eval Board";
+#elif defined(CONFIG_PMC_MSP7120_GW)
+	return "PMC-Sierra MSP7120 Residential Gateway";
+#elif defined(CONFIG_PMC_MSP7120_FPGA)
+	return "PMC-Sierra MSP7120 FPGA";
+#else
+	#error "What is the type of *your* MSP?"
+#endif
+}
+
+int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr)
+{
+	char *ethaddr_str;
+
+	ethaddr_str = prom_getenv(ethaddr_name);
+	if (!ethaddr_str) {
+		printk(KERN_WARNING "%s not set in boot prom\n", ethaddr_name);
+		return -1;
+	}
+
+	if (str2eaddr(ethernet_addr, ethaddr_str) == -1) {
+		printk(KERN_WARNING "%s badly formatted-<%s>\n",
+			ethaddr_name, ethaddr_str);
+		return -1;
+	}
+
+	if (init_debug > 1) {
+		int i;
+		printk(KERN_DEBUG "get_ethernet_addr: for %s ", ethaddr_name);
+		for (i = 0; i < 5; i++)
+			printk(KERN_DEBUG "%02x:",
+				(unsigned char)*(ethernet_addr+i));
+		printk(KERN_DEBUG "%02x\n", *(ethernet_addr+i));
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(get_ethernet_addr);
+
+static char *get_features(void)
+{
+	char *feature = prom_getenv(FEATURES);
+
+	if (feature == NULL) {
+		/* default features based on MACHINE_TYPE */
+		feature = msp_default_features;
+	}
+
+	return feature;
+}
+
+static char test_feature(char c)
+{
+	char *feature = get_features();
+
+	while (*feature) {
+		if (*feature++ == c)
+			return *feature;
+		feature++;
+	}
+
+	return FEATURE_NOEXIST;
+}
+
+unsigned long get_deviceid(void)
+{
+	char *deviceid = prom_getenv(DEVICEID);
+
+	if (deviceid == NULL)
+		return *DEV_ID_REG;
+	else
+		return str2hex(deviceid);
+}
+
+char identify_pci(void)
+{
+	return test_feature(PCI_KEY);
+}
+EXPORT_SYMBOL(identify_pci);
+
+char identify_pcimux(void)
+{
+	return test_feature(PCIMUX_KEY);
+}
+
+char identify_sec(void)
+{
+	return test_feature(SEC_KEY);
+}
+EXPORT_SYMBOL(identify_sec);
+
+char identify_spad(void)
+{
+	return test_feature(SPAD_KEY);
+}
+EXPORT_SYMBOL(identify_spad);
+
+char identify_tdm(void)
+{
+	return test_feature(TDM_KEY);
+}
+EXPORT_SYMBOL(identify_tdm);
+
+char identify_zsp(void)
+{
+	return test_feature(ZSP_KEY);
+}
+EXPORT_SYMBOL(identify_zsp);
+
+static char identify_enetfeature(char key, unsigned long interface_num)
+{
+	char *feature = get_features();
+
+	while (*feature) {
+		if (*feature++ == key && interface_num-- == 0)
+			return *feature;
+		feature++;
+	}
+
+	return FEATURE_NOEXIST;
+}
+
+char identify_enet(unsigned long interface_num)
+{
+	return identify_enetfeature(ENET_KEY, interface_num);
+}
+EXPORT_SYMBOL(identify_enet);
+
+char identify_enetTxD(unsigned long interface_num)
+{
+	return identify_enetfeature(ENETTXD_KEY, interface_num);
+}
+EXPORT_SYMBOL(identify_enetTxD);
+
+unsigned long identify_family(void)
+{
+	unsigned long deviceid;
+
+	deviceid = get_deviceid();
+
+	return deviceid & CPU_DEVID_FAMILY;
+}
+EXPORT_SYMBOL(identify_family);
+
+unsigned long identify_revision(void)
+{
+	unsigned long deviceid;
+
+	deviceid = get_deviceid();
+
+	return deviceid & CPU_DEVID_REVISION;
+}
+EXPORT_SYMBOL(identify_revision);
+
+/* PROM environment functions */
+char *prom_getenv(char *env_name)
+{
+	/*
+	 * Return a pointer to the given environment variable.	prom_envp
+	 * points to a null terminated array of pointers to variables.
+	 * Environment variables are stored in the form of "memsize=64"
+	 */
+
+	char **var = prom_envp;
+	int i = strlen(env_name);
+
+	while (*var) {
+		if (strncmp(env_name, *var, i) == 0) {
+			return (*var + strlen(env_name) + 1);
+		}
+		var++;
+	}
+
+	return NULL;
+}
+
+/* PROM commandline functions */
+void  __init prom_init_cmdline(void)
+{
+	char *cp;
+	int actr;
+
+	actr = 1; /* Always ignore argv[0] */
+
+	cp = &(arcs_cmdline[0]);
+	while (actr < prom_argc) {
+		strcpy(cp, prom_argv[actr]);
+		cp += strlen(prom_argv[actr]);
+		*cp++ = ' ';
+		actr++;
+	}
+	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
+		--cp;
+	*cp = '\0';
+}
+
+/* memory allocation functions */
+static int __init prom_memtype_classify(unsigned int type)
+{
+	switch (type) {
+	case yamon_free:
+		return BOOT_MEM_RAM;
+	case yamon_prom:
+		return BOOT_MEM_ROM_DATA;
+	default:
+		return BOOT_MEM_RESERVED;
+	}
+}
+
+void __init prom_meminit(void)
+{
+	struct prom_pmemblock *p;
+
+	p = prom_getmdesc();
+
+	while (p->size) {
+		long type;
+		unsigned long base, size;
+
+		type = prom_memtype_classify(p->type);
+		base = p->base;
+		size = p->size;
+
+		add_memory_region(base, size, type);
+		p++;
+	}
+}
+
+void __init prom_free_prom_memory(void)
+{
+	int	argc;
+	char	**argv;
+	char	**envp;
+	char	*ptr;
+	int	len = 0;
+	int	i;
+	unsigned long addr;
+
+	/*
+	 * preserve environment variables and command line from pmon/bbload
+	 * first preserve the command line
+	 */
+	for (argc = 0; argc < prom_argc; argc++) {
+		len += sizeof(char *);			/* length of pointer */
+		len += strlen(prom_argv[argc]) + 1;	/* length of string */
+	}
+	len += sizeof(char *);		/* plus length of null pointer */
+
+	argv = kmalloc(len, GFP_KERNEL);
+	ptr = (char *) &argv[prom_argc + 1];	/* strings follow array */
+
+	for (argc = 0; argc < prom_argc; argc++) {
+		argv[argc] = ptr;
+		strcpy(ptr, prom_argv[argc]);
+		ptr += strlen(prom_argv[argc]) + 1;
+	}
+	argv[prom_argc] = NULL;		/* end array with null pointer */
+	prom_argv = argv;
+
+	/* next preserve the environment variables */
+	len = 0;
+	i = 0;
+	for (envp = prom_envp; *envp != NULL; envp++) {
+		i++;		/* count number of environment variables */
+		len += sizeof(char *);		/* length of pointer */
+		len += strlen(*envp) + 1;	/* length of string */
+	}
+	len += sizeof(char *);		/* plus length of null pointer */
+
+	envp = kmalloc(len, GFP_KERNEL);
+	ptr = (char *) &envp[i+1];
+
+	for (argc = 0; argc < i; argc++) {
+		envp[argc] = ptr;
+		strcpy(ptr, prom_envp[argc]);
+		ptr += strlen(prom_envp[argc]) + 1;
+	}
+	envp[i] = NULL;			/* end array with null pointer */
+	prom_envp = envp;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
+			continue;
+
+		addr = boot_mem_map.map[i].addr;
+		free_init_pages("prom memory",
+				addr, addr + boot_mem_map.map[i].size);
+	}
+}
+
+struct prom_pmemblock *__init prom_getmdesc(void)
+{
+	static char	memsz_env[] __initdata = "memsize";
+	static char	heaptop_env[] __initdata = "heaptop";
+	char		*str;
+	unsigned int	memsize;
+	unsigned int	heaptop;
+	int i;
+
+	str = prom_getenv(memsz_env);
+	if (!str) {
+		ppfinit("memsize not set in boot prom, "
+			"set to default (32Mb)\n");
+		memsize = 0x02000000;
+	} else {
+		memsize = simple_strtol(str, NULL, 0);
+
+		if (memsize == 0) {
+			/* if memsize is a bad size, use reasonable default */
+			memsize = 0x02000000;
+		}
+
+		/* convert to physical address (removing caching bits, etc) */
+		memsize = CPHYSADDR(memsize);
+	}
+
+	str = prom_getenv(heaptop_env);
+	if (!str) {
+		heaptop = CPHYSADDR((u32)&_text);
+		ppfinit("heaptop not set in boot prom, "
+			"set to default 0x%08x\n", heaptop);
+	} else {
+		heaptop = simple_strtol(str, NULL, 16);
+		if (heaptop == 0) {
+			/* heaptop conversion bad, might have 0xValue */
+			heaptop = simple_strtol(str, NULL, 0);
+
+			if (heaptop == 0) {
+				/* heaptop still bad, use reasonable default */
+				heaptop = CPHYSADDR((u32)&_text);
+			}
+		}
+
+		/* convert to physical address (removing caching bits, etc) */
+		heaptop = CPHYSADDR((u32)heaptop);
+	}
+
+	/* the base region */
+	i = 0;
+	mdesc[i].type = BOOT_MEM_RESERVED;
+	mdesc[i].base = 0x00000000;
+	mdesc[i].size = PAGE_ALIGN(0x300 + 0x80);
+		/* jtag interrupt vector + sizeof vector */
+
+	/* PMON data */
+	if (heaptop > mdesc[i].base + mdesc[i].size) {
+		i++;			/* 1 */
+		mdesc[i].type = BOOT_MEM_ROM_DATA;
+		mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size;
+		mdesc[i].size = heaptop - mdesc[i].base;
+	}
+
+	/* end of PMON data to start of kernel -- probably zero .. */
+	if (heaptop != CPHYSADDR((u32)_text)) {
+		i++;	/* 2 */
+		mdesc[i].type = BOOT_MEM_RAM;
+		mdesc[i].base = heaptop;
+		mdesc[i].size = CPHYSADDR((u32)_text) - mdesc[i].base;
+	}
+
+	/*  kernel proper */
+	i++;			/* 3 */
+	mdesc[i].type = BOOT_MEM_RESERVED;
+	mdesc[i].base = CPHYSADDR((u32)_text);
+	mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base;
+
+	/* Remainder of RAM -- under memsize */
+	i++;			/* 5 */
+	mdesc[i].type = yamon_free;
+	mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size;
+	mdesc[i].size = memsize - mdesc[i].base;
+
+	return &mdesc[0];
+}

arch/mips/pmcs-msp71xx/msp_serial.c

@@ -0,0 +1,154 @@
+/*
+ * The setup file for serial related hardware on PMC-Sierra MSP processors.
+ *
+ * Copyright 2005 PMC-Sierra, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/slab.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/serial.h>
+#include <linux/serial_8250.h>
+
+#include <msp_prom.h>
+#include <msp_int.h>
+#include <msp_regs.h>
+
+struct msp_uart_data {
+	int	last_lcr;
+};
+
+static void msp_serial_out(struct uart_port *p, int offset, int value)
+{
+	struct msp_uart_data *d = p->private_data;
+
+	if (offset == UART_LCR)
+		d->last_lcr = value;
+
+	offset <<= p->regshift;
+	writeb(value, p->membase + offset);
+}
+
+static unsigned int msp_serial_in(struct uart_port *p, int offset)
+{
+	offset <<= p->regshift;
+
+	return readb(p->membase + offset);
+}
+
+static int msp_serial_handle_irq(struct uart_port *p)
+{
+	struct msp_uart_data *d = p->private_data;
+	unsigned int iir = readb(p->membase + (UART_IIR << p->regshift));
+
+	if (serial8250_handle_irq(p, iir)) {
+		return 1;
+	} else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
+		/*
+		 * The DesignWare APB UART has an Busy Detect (0x07) interrupt
+		 * meaning an LCR write attempt occurred while the UART was
+		 * busy. The interrupt must be cleared by reading the UART
+		 * status register (USR) and the LCR re-written.
+		 *
+		 * Note: MSP reserves 0x20 bytes of address space for the UART
+		 * and the USR is mapped in a separate block at an offset of
+		 * 0xc0 from the start of the UART.
+		 */
+		(void)readb(p->membase + 0xc0);
+		writeb(d->last_lcr, p->membase + (UART_LCR << p->regshift));
+
+		return 1;
+	}
+
+	return 0;
+}
+
+void __init msp_serial_setup(void)
+{
+	char	*s;
+	char	*endp;
+	struct uart_port up;
+	unsigned int uartclk;
+
+	memset(&up, 0, sizeof(up));
+
+	/* Check if clock was specified in environment */
+	s = prom_getenv("uartfreqhz");
+	if(!(s && *s && (uartclk = simple_strtoul(s, &endp, 10)) && *endp == 0))
+		uartclk = MSP_BASE_BAUD;
+	ppfinit("UART clock set to %d\n", uartclk);
+
+	/* Initialize first serial port */
+	up.mapbase	= MSP_UART0_BASE;
+	up.membase	= ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
+	up.irq		= MSP_INT_UART0;
+	up.uartclk	= uartclk;
+	up.regshift	= 2;
+	up.iotype	= UPIO_MEM;
+	up.flags	= ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	up.type		= PORT_16550A;
+	up.line		= 0;
+	up.serial_out	= msp_serial_out;
+	up.serial_in	= msp_serial_in;
+	up.handle_irq	= msp_serial_handle_irq;
+	up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL);
+	if (!up.private_data) {
+		pr_err("failed to allocate uart private data\n");
+		return;
+	}
+	if (early_serial_setup(&up)) {
+		kfree(up.private_data);
+		pr_err("Early serial init of port 0 failed\n");
+	}
+
+	/* Initialize the second serial port, if one exists */
+	switch (mips_machtype) {
+		case MACH_MSP4200_EVAL:
+		case MACH_MSP4200_GW:
+		case MACH_MSP4200_FPGA:
+		case MACH_MSP7120_EVAL:
+		case MACH_MSP7120_GW:
+		case MACH_MSP7120_FPGA:
+			/* Enable UART1 on MSP4200 and MSP7120 */
+			*GPIO_CFG2_REG = 0x00002299;
+			break;
+
+		default:
+			return; /* No second serial port, good-bye. */
+	}
+
+	up.mapbase	= MSP_UART1_BASE;
+	up.membase	= ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
+	up.irq		= MSP_INT_UART1;
+	up.line		= 1;
+	up.private_data		= (void*)UART1_STATUS_REG;
+	if (early_serial_setup(&up)) {
+		kfree(up.private_data);
+		pr_err("Early serial init of port 1 failed\n");
+	}
+}

arch/mips/pmcs-msp71xx/msp_setup.c

@@ -0,0 +1,231 @@
+/*
+ * The generic setup file for PMC-Sierra MSP processors
+ *
+ * Copyright 2005-2007 PMC-Sierra, Inc,
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/bootinfo.h>
+#include <asm/cacheflush.h>
+#include <asm/idle.h>
+#include <asm/r4kcache.h>
+#include <asm/reboot.h>
+#include <asm/smp-ops.h>
+#include <asm/time.h>
+
+#include <msp_prom.h>
+#include <msp_regs.h>
+
+#if defined(CONFIG_PMC_MSP7120_GW)
+#include <msp_regops.h>
+#define MSP_BOARD_RESET_GPIO	9
+#endif
+
+extern void msp_serial_setup(void);
+
+#if defined(CONFIG_PMC_MSP7120_EVAL) || \
+    defined(CONFIG_PMC_MSP7120_GW) || \
+    defined(CONFIG_PMC_MSP7120_FPGA)
+/*
+ * Performs the reset for MSP7120-based boards
+ */
+void msp7120_reset(void)
+{
+	void *start, *end, *iptr;
+	register int i;
+
+	/* Diasble all interrupts */
+	local_irq_disable();
+#ifdef CONFIG_SYS_SUPPORTS_MULTITHREADING
+	dvpe();
+#endif
+
+	/* Cache the reset code of this function */
+	__asm__ __volatile__ (
+		"	.set	push				\n"
+		"	.set	arch=r4000			\n"
+		"	la	%0,startpoint			\n"
+		"	la	%1,endpoint			\n"
+		"	.set	pop				\n"
+		: "=r" (start), "=r" (end)
+		:
+	);
+
+	for (iptr = (void *)((unsigned int)start & ~(L1_CACHE_BYTES - 1));
+	     iptr < end; iptr += L1_CACHE_BYTES)
+		cache_op(Fill, iptr);
+
+	__asm__ __volatile__ (
+		"startpoint:					\n"
+	);
+
+	/* Put the DDRC into self-refresh mode */
+	DDRC_INDIRECT_WRITE(DDRC_CTL(10), 0xb, 1 << 16);
+
+	/*
+	 * IMPORTANT!
+	 * DO NOT do anything from here on out that might even
+	 * think about fetching from RAM - i.e., don't call any
+	 * non-inlined functions, and be VERY sure that any inline
+	 * functions you do call do NOT access any sort of RAM
+	 * anywhere!
+	 */
+
+	/* Wait a bit for the DDRC to settle */
+	for (i = 0; i < 100000000; i++);
+
+#if defined(CONFIG_PMC_MSP7120_GW)
+	/*
+	 * Set GPIO 9 HI, (tied to board reset logic)
+	 * GPIO 9 is the 4th GPIO of register 3
+	 *
+	 * NOTE: We cannot use the higher-level msp_gpio_mode()/out()
+	 * as GPIO char driver may not be enabled and it would look up
+	 * data inRAM!
+	 */
+	set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000);
+	set_reg32(GPIO_DATA3_REG, 8);
+
+	/*
+	 * In case GPIO9 doesn't reset the board (jumper configurable!)
+	 * fallback to device reset below.
+	 */
+#endif
+	/* Set bit 1 of the MSP7120 reset register */
+	*RST_SET_REG = 0x00000001;
+
+	__asm__ __volatile__ (
+		"endpoint:					\n"
+	);
+}
+#endif
+
+void msp_restart(char *command)
+{
+	printk(KERN_WARNING "Now rebooting .......\n");
+
+#if defined(CONFIG_PMC_MSP7120_EVAL) || \
+    defined(CONFIG_PMC_MSP7120_GW) || \
+    defined(CONFIG_PMC_MSP7120_FPGA)
+	msp7120_reset();
+#else
+	/* No chip-specific reset code, just jump to the ROM reset vector */
+	set_c0_status(ST0_BEV | ST0_ERL);
+	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
+	flush_cache_all();
+	write_c0_wired(0);
+
+	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
+#endif
+}
+
+void msp_halt(void)
+{
+	printk(KERN_WARNING "\n** You can safely turn off the power\n");
+	while (1)
+		/* If possible call official function to get CPU WARs */
+		if (cpu_wait)
+			(*cpu_wait)();
+		else
+			__asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0");
+}
+
+void msp_power_off(void)
+{
+	msp_halt();
+}
+
+void __init plat_mem_setup(void)
+{
+	_machine_restart = msp_restart;
+	_machine_halt = msp_halt;
+	pm_power_off = msp_power_off;
+}
+
+void __init prom_init(void)
+{
+	unsigned long family;
+	unsigned long revision;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	/*
+	 * Someday we can use this with PMON2000 to get a
+	 * platform call prom routines for output etc. without
+	 * having to use grody hacks.  For now it's unused.
+	 *
+	 * struct callvectors *cv = (struct callvectors *) fw_arg3;
+	 */
+	family = identify_family();
+	revision = identify_revision();
+
+	switch (family) {
+	case FAMILY_FPGA:
+		if (FPGA_IS_MSP4200(revision)) {
+			/* Old-style revision ID */
+			mips_machtype = MACH_MSP4200_FPGA;
+		} else {
+			mips_machtype = MACH_MSP_OTHER;
+		}
+		break;
+
+	case FAMILY_MSP4200:
+#if defined(CONFIG_PMC_MSP4200_EVAL)
+		mips_machtype  = MACH_MSP4200_EVAL;
+#elif defined(CONFIG_PMC_MSP4200_GW)
+		mips_machtype  = MACH_MSP4200_GW;
+#else
+		mips_machtype = MACH_MSP_OTHER;
+#endif
+		break;
+
+	case FAMILY_MSP4200_FPGA:
+		mips_machtype  = MACH_MSP4200_FPGA;
+		break;
+
+	case FAMILY_MSP7100:
+#if defined(CONFIG_PMC_MSP7120_EVAL)
+		mips_machtype = MACH_MSP7120_EVAL;
+#elif defined(CONFIG_PMC_MSP7120_GW)
+		mips_machtype = MACH_MSP7120_GW;
+#else
+		mips_machtype = MACH_MSP_OTHER;
+#endif
+		break;
+
+	case FAMILY_MSP7100_FPGA:
+		mips_machtype  = MACH_MSP7120_FPGA;
+		break;
+
+	default:
+		/* we don't recognize the machine */
+		mips_machtype  = MACH_UNKNOWN;
+		panic("***Bogosity factor five***, exiting");
+		break;
+	}
+
+	prom_init_cmdline();
+
+	prom_meminit();
+
+	/*
+	 * Sub-system setup follows.
+	 * Setup functions can	either be called here or using the
+	 * subsys_initcall mechanism (i.e. see msp_pci_setup). The
+	 * order in which they are called can be changed by using the
+	 * link order in arch/mips/pmc-sierra/msp71xx/Makefile.
+	 *
+	 * NOTE: Please keep sub-system specific initialization code
+	 * in separate specific files.
+	 */
+	msp_serial_setup();
+
+	register_vsmp_smp_ops();
+}

arch/mips/pmcs-msp71xx/msp_smp.c

@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ * Copyright (C) 2010 PMC-Sierra, Inc.
+ *
+ *  VSMP support for MSP platforms . Derived from malta vsmp support.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+
+#ifdef CONFIG_MIPS_MT_SMP
+#define MIPS_CPU_IPI_RESCHED_IRQ 0	/* SW int 0 for resched */
+#define MIPS_CPU_IPI_CALL_IRQ 1		/* SW int 1 for call */
+
+
+static void ipi_resched_dispatch(void)
+{
+	do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ);
+}
+
+static void ipi_call_dispatch(void)
+{
+	do_IRQ(MIPS_CPU_IPI_CALL_IRQ);
+}
+
+static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
+{
+	smp_call_function_interrupt();
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq_resched = {
+	.handler	= ipi_resched_interrupt,
+	.flags		= IRQF_PERCPU,
+	.name		= "IPI_resched"
+};
+
+static struct irqaction irq_call = {
+	.handler	= ipi_call_interrupt,
+	.flags		= IRQF_PERCPU,
+	.name		= "IPI_call"
+};
+
+void __init arch_init_ipiirq(int irq, struct irqaction *action)
+{
+	setup_irq(irq, action);
+	irq_set_handler(irq, handle_percpu_irq);
+}
+
+void __init msp_vsmp_int_init(void)
+{
+	set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
+	set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
+	arch_init_ipiirq(MIPS_CPU_IPI_RESCHED_IRQ, &irq_resched);
+	arch_init_ipiirq(MIPS_CPU_IPI_CALL_IRQ, &irq_call);
+}
+#endif /* CONFIG_MIPS_MT_SMP */

arch/mips/pmcs-msp71xx/msp_time.c

@@ -0,0 +1,101 @@
+/*
+ * Setting up the clock on MSP SOCs.  No RTC typically.
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+
+#include <asm/cevt-r4k.h>
+#include <asm/mipsregs.h>
+#include <asm/time.h>
+
+#include <msp_prom.h>
+#include <msp_int.h>
+#include <msp_regs.h>
+
+#define get_current_vpe()   \
+	((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
+
+static struct irqaction timer_vpe1;
+static int tim_installed;
+
+void __init plat_time_init(void)
+{
+	char	*endp, *s;
+	unsigned long cpu_rate = 0;
+
+	if (cpu_rate == 0) {
+		s = prom_getenv("clkfreqhz");
+		cpu_rate = simple_strtoul(s, &endp, 10);
+		if (endp != NULL && *endp != 0) {
+			printk(KERN_ERR
+				"Clock rate in Hz parse error: %s\n", s);
+			cpu_rate = 0;
+		}
+	}
+
+	if (cpu_rate == 0) {
+		s = prom_getenv("clkfreq");
+		cpu_rate = 1000 * simple_strtoul(s, &endp, 10);
+		if (endp != NULL && *endp != 0) {
+			printk(KERN_ERR
+				"Clock rate in MHz parse error: %s\n", s);
+			cpu_rate = 0;
+		}
+	}
+
+	if (cpu_rate == 0) {
+#if defined(CONFIG_PMC_MSP7120_EVAL) \
+ || defined(CONFIG_PMC_MSP7120_GW)
+		cpu_rate = 400000000;
+#elif defined(CONFIG_PMC_MSP7120_FPGA)
+		cpu_rate = 25000000;
+#else
+		cpu_rate = 150000000;
+#endif
+		printk(KERN_ERR
+			"Failed to determine CPU clock rate, "
+			"assuming %ld hz ...\n", cpu_rate);
+	}
+
+	printk(KERN_WARNING "Clock rate set to %ld\n", cpu_rate);
+
+	/* timer frequency is 1/2 clock rate */
+	mips_hpt_frequency = cpu_rate/2;
+}
+
+unsigned int get_c0_compare_int(void)
+{
+	/* MIPS_MT modes may want timer for second VPE */
+	if ((get_current_vpe()) && !tim_installed) {
+		memcpy(&timer_vpe1, &c0_compare_irqaction, sizeof(timer_vpe1));
+		setup_irq(MSP_INT_VPE1_TIMER, &timer_vpe1);
+		tim_installed++;
+	}
+
+	return get_current_vpe() ? MSP_INT_VPE1_TIMER : MSP_INT_VPE0_TIMER;
+}

arch/mips/pmcs-msp71xx/msp_usb.c

@@ -0,0 +1,173 @@
+/*
+ * The setup file for USB related hardware on PMC-Sierra MSP processors.
+ *
+ * Copyright 2006 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET)
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/mipsregs.h>
+
+#include <msp_regs.h>
+#include <msp_int.h>
+#include <msp_prom.h>
+#include <msp_usb.h>
+
+
+#if defined(CONFIG_USB_EHCI_HCD)
+static struct resource msp_usbhost0_resources[] = {
+	[0] = { /* EHCI-HS operational and capabilities registers */
+		.start	= MSP_USB0_HS_START,
+		.end	= MSP_USB0_HS_END,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= MSP_INT_USB,
+		.end	= MSP_INT_USB,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = { /* MSBus-to-AMBA bridge register space */
+		.start	= MSP_USB0_MAB_START,
+		.end	= MSP_USB0_MAB_END,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = { /* Identification and general hardware parameters */
+		.start	= MSP_USB0_ID_START,
+		.end	= MSP_USB0_ID_END,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static u64 msp_usbhost0_dma_mask = 0xffffffffUL;
+
+static struct mspusb_device msp_usbhost0_device = {
+	.dev	= {
+		.name	= "pmcmsp-ehci",
+		.id	= 0,
+		.dev	= {
+			.dma_mask = &msp_usbhost0_dma_mask,
+			.coherent_dma_mask = 0xffffffffUL,
+		},
+		.num_resources	= ARRAY_SIZE(msp_usbhost0_resources),
+		.resource	= msp_usbhost0_resources,
+	},
+};
+#endif /* CONFIG_USB_EHCI_HCD */
+
+#if defined(CONFIG_USB_GADGET)
+static struct resource msp_usbdev0_resources[] = {
+	[0] = { /* EHCI-HS operational and capabilities registers */
+		.start	= MSP_USB0_HS_START,
+		.end	= MSP_USB0_HS_END,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= MSP_INT_USB,
+		.end	= MSP_INT_USB,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = { /* MSBus-to-AMBA bridge register space */
+		.start	= MSP_USB0_MAB_START,
+		.end	= MSP_USB0_MAB_END,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = { /* Identification and general hardware parameters */
+		.start	= MSP_USB0_ID_START,
+		.end	= MSP_USB0_ID_END,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static u64 msp_usbdev_dma_mask = 0xffffffffUL;
+
+/* This may need to be converted to a mspusb_device, too. */
+static struct mspusb_device msp_usbdev0_device = {
+	.dev	= {
+		.name	= "msp71xx_udc",
+		.id	= 0,
+		.dev	= {
+			.dma_mask = &msp_usbdev_dma_mask,
+			.coherent_dma_mask = 0xffffffffUL,
+		},
+		.num_resources	= ARRAY_SIZE(msp_usbdev0_resources),
+		.resource	= msp_usbdev0_resources,
+	},
+};
+#endif /* CONFIG_USB_GADGET */
+
+static int __init msp_usb_setup(void)
+{
+	char		*strp;
+	char		envstr[32];
+	struct platform_device *msp_devs[NUM_USB_DEVS];
+	unsigned int val;
+
+	/* construct environment name usbmode */
+	/* set usbmode <host/device> as pmon environment var */
+	/*
+	 * Could this perhaps be integrated into the "features" env var?
+	 * Use the features key "U", and follow with "H" for host-mode,
+	 * "D" for device-mode.	 If it works for Ethernet, why not USB...
+	 *  -- hammtrev, 2007/03/22
+	 */
+	snprintf((char *)&envstr[0], sizeof(envstr), "usbmode");
+
+	/* set default host mode */
+	val = 1;
+
+	/* get environment string */
+	strp = prom_getenv((char *)&envstr[0]);
+	if (strp) {
+		/* compare string */
+		if (!strcmp(strp, "device"))
+			val = 0;
+	}
+
+	if (val) {
+#if defined(CONFIG_USB_EHCI_HCD)
+		msp_devs[0] = &msp_usbhost0_device.dev;
+		ppfinit("platform add USB HOST done %s.\n", msp_devs[0]->name);
+#else
+		ppfinit("%s: echi_hcd not supported\n", __FILE__);
+#endif	/* CONFIG_USB_EHCI_HCD */
+	} else {
+#if defined(CONFIG_USB_GADGET)
+		/* get device mode structure */
+		msp_devs[0] = &msp_usbdev0_device.dev;
+		ppfinit("platform add USB DEVICE done %s.\n"
+					, msp_devs[0]->name);
+#else
+		ppfinit("%s: usb_gadget not supported\n", __FILE__);
+#endif	/* CONFIG_USB_GADGET */
+	}
+	/* add device */
+	platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs));
+
+	return 0;
+}
+
+subsys_initcall(msp_usb_setup);
+#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */