Fixed MTP to work with TWRP

arch/powerpc/boot/dts/ppa8548.dts

@@ -0,0 +1,164 @@
+/*
+ * PPA8548 Device Tree Source (36-bit address map)
+ * Copyright 2013 Prodrive B.V.
+ *
+ * Based on:
+ * MPC8548 CDS Device Tree Source (36-bit address map)
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/mpc8548si-pre.dtsi"
+
+/ {
+	model = "ppa8548";
+	compatible = "ppa8548";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0x0 0x40000000>;
+	};
+
+	lbc: localbus@fe0005000 {
+		reg = <0xf 0xe0005000 0 0x1000>;
+		ranges = <0x0 0x0 0xf 0xff800000 0x00800000>;
+	};
+
+	soc: soc8548@fe0000000 {
+		ranges = <0 0xf 0xe0000000 0x100000>;
+	};
+
+	pci0: pci@fe0008000 {
+		/* ppa8548 board doesn't support PCI */
+		status = "disabled";
+	};
+
+	pci1: pci@fe0009000 {
+		/* ppa8548 board doesn't support PCI */
+		status = "disabled";
+	};
+
+	pci2: pcie@fe000a000 {
+		/* ppa8548 board doesn't support PCI */
+		status = "disabled";
+	};
+
+	rio: rapidio@fe00c0000 {
+		reg = <0xf 0xe00c0000 0x0 0x11000>;
+		port1 {
+			ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>;
+		};
+	};
+};
+
+&lbc {
+	nor@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x00800000>;
+		bank-width = <2>;
+		device-width = <2>;
+
+		partition@0 {
+			reg = <0x0 0x7A0000>;
+			label = "user";
+		};
+
+		partition@7A0000 {
+			reg = <0x7A0000 0x20000>;
+			label = "env";
+			read-only;
+		};
+
+		partition@7C0000 {
+			reg = <0x7C0000 0x40000>;
+			label = "u-boot";
+			read-only;
+		};
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@6f {
+			compatible = "intersil,isl1208";
+			reg = <0x6f>;
+		};
+	};
+
+	i2c@3100 {
+	};
+
+	/*
+	 * Only ethernet controller @25000 and @26000 are used.
+	 * Use alias enet2 and enet3 for the remainig controllers,
+	 * to stay compatible with mpc8548si-pre.dtsi.
+	 */
+	enet2: ethernet@24000 {
+		status = "disabled";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <7 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <8 1 0 0>;
+			reg = <0x1>;
+		};
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@25000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy0>;
+	};
+
+	mdio@25520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet1: ethernet@26000 {
+		tbi-handle = <&tbi2>;
+		phy-handle = <&phy1>;
+	};
+
+	mdio@26520 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet3: ethernet@27000 {
+		status = "disabled";
+	};
+
+	mdio@27520 {
+		tbi3: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	crypto@30000 {
+		status = "disabled";
+	};
+};
+
+/include/ "fsl/mpc8548si-post.dtsi"