Fixed MTP to work with TWRP

arch/powerpc/platforms/ps3/Kconfig

@@ -0,0 +1,173 @@
+config PPC_PS3
+	bool "Sony PS3"
+	depends on PPC64 && PPC_BOOK3S
+	select PPC_CELL
+	select USB_OHCI_LITTLE_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_MMIO
+	select USB_EHCI_BIG_ENDIAN_MMIO
+	select PPC_PCI_CHOICE
+	help
+	  This option enables support for the Sony PS3 game console
+	  and other platforms using the PS3 hypervisor.  Enabling this
+	  option will allow building otheros.bld, a kernel image suitable
+	  for programming into flash memory, and vmlinux, a kernel image
+	  suitable for loading via kexec.
+
+menu "PS3 Platform Options"
+	depends on PPC_PS3
+
+config PS3_ADVANCED
+	depends on PPC_PS3
+	bool "PS3 Advanced configuration options"
+	help
+	  This gives you access to some advanced options for the PS3. The
+	  defaults should be fine for most users, but these options may make
+	  it possible to better control the kernel configuration if you know
+	  what you are doing.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about these options.
+
+	  Most users should say N to this question.
+
+config PS3_HTAB_SIZE
+	depends on PPC_PS3
+	int "PS3 Platform pagetable size" if PS3_ADVANCED
+	range 18 20
+	default 20
+	help
+	  This option is only for experts who may have the desire to fine
+	  tune the pagetable size on their system.  The value here is
+	  expressed as the log2 of the page table size.  Valid values are
+	  18, 19, and 20, corresponding to 256KB, 512KB and 1MB respectively.
+
+	  If unsure, choose the default (20) with the confidence that your
+	  system will have optimal runtime performance.
+
+config PS3_DYNAMIC_DMA
+	depends on PPC_PS3
+	bool "PS3 Platform dynamic DMA page table management"
+	default n
+	help
+	  This option will enable kernel support to take advantage of the
+	  per device dynamic DMA page table management provided by the Cell
+	  processor's IO Controller.  This support incurs some runtime
+	  overhead and also slightly increases kernel memory usage.  The
+	  current implementation should be considered experimental.
+
+	  This support is mainly for Linux kernel development.  If unsure,
+	  say N.
+
+config PS3_VUART
+	depends on PPC_PS3
+	tristate
+
+config PS3_PS3AV
+	depends on PPC_PS3
+	tristate "PS3 AV settings driver" if PS3_ADVANCED
+	select PS3_VUART
+	default y
+	help
+	  Include support for the PS3 AV Settings driver.
+
+	  This support is required for PS3 graphics and sound. In
+	  general, all users will say Y or M.
+
+config PS3_SYS_MANAGER
+	depends on PPC_PS3
+	tristate "PS3 System Manager driver" if PS3_ADVANCED
+	select PS3_VUART
+	default y
+	help
+	  Include support for the PS3 System Manager.
+
+	  This support is required for PS3 system control.  In
+	  general, all users will say Y or M.
+
+config PS3_REPOSITORY_WRITE
+	bool "PS3 Repository write support" if PS3_ADVANCED
+	depends on PPC_PS3
+	default n
+	help
+	  Enables support for writing to the PS3 System Repository.
+
+	  This support is intended for bootloaders that need to store data
+	  in the repository for later boot stages.
+
+	  If in doubt, say N here and reduce the size of the kernel by a
+	  small amount.
+
+config PS3_STORAGE
+	depends on PPC_PS3
+	tristate
+
+config PS3_DISK
+	tristate "PS3 Disk Storage Driver"
+	depends on PPC_PS3 && BLOCK
+	select PS3_STORAGE
+	help
+	  Include support for the PS3 Disk Storage.
+
+	  This support is required to access the PS3 hard disk.
+	  In general, all users will say Y or M.
+
+config PS3_ROM
+	tristate "PS3 BD/DVD/CD-ROM Storage Driver"
+	depends on PPC_PS3 && SCSI
+	select PS3_STORAGE
+	help
+	  Include support for the PS3 ROM Storage.
+
+	  This support is required to access the PS3 BD/DVD/CD-ROM drive.
+	  In general, all users will say Y or M.
+	  Also make sure to say Y or M to "SCSI CDROM support" later.
+
+config PS3_FLASH
+	tristate "PS3 FLASH ROM Storage Driver"
+	depends on PPC_PS3
+	select PS3_STORAGE
+	help
+	  Include support for the PS3 FLASH ROM Storage.
+
+	  This support is required to access the PS3 FLASH ROM, which
+	  contains the boot loader and some boot options.
+	  In general, PS3 OtherOS users will say Y or M.
+
+	  As this driver needs a fixed buffer of 256 KiB of memory, it can
+	  be disabled on the kernel command line using "ps3flash=off", to
+	  not allocate this fixed buffer.
+
+config PS3_VRAM
+	tristate "PS3 Video RAM Storage Driver"
+	depends on FB_PS3=y && BLOCK && m
+	help
+	  This driver allows you to use excess PS3 video RAM as volatile
+	  storage or system swap.
+
+config PS3_LPM
+	tristate "PS3 Logical Performance Monitor support"
+	depends on PPC_PS3
+	help
+	  Include support for the PS3 Logical Performance Monitor.
+
+	  This support is required to use the logical performance monitor
+	  of the PS3's LV1 hypervisor.
+
+	  If you intend to use the advanced performance monitoring and
+	  profiling support of the Cell processor with programs like
+	  oprofile and perfmon2, then say Y or M, otherwise say N.
+
+config PS3GELIC_UDBG
+	bool "PS3 udbg output via UDP broadcasts on Ethernet"
+	depends on PPC_PS3
+	help
+	  Enables udbg early debugging output by sending broadcast UDP
+	  via the Ethernet port (UDP port number 18194).
+
+	  This driver uses a trivial implementation and is independent
+	  from the main PS3 gelic network driver.
+
+	  If in doubt, say N here.
+
+endmenu