Fixed MTP to work with TWRP

arch/x86/include/asm/barrier.h

@@ -0,0 +1,157 @@
+#ifndef _ASM_X86_BARRIER_H
+#define _ASM_X86_BARRIER_H
+
+#include <asm/alternative.h>
+#include <asm/nops.h>
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+
+#ifdef CONFIG_X86_32
+/*
+ * Some non-Intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#else
+#define mb() 	asm volatile("mfence":::"memory")
+#define rmb()	asm volatile("lfence":::"memory")
+#define wmb()	asm volatile("sfence" ::: "memory")
+#endif
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ **/
+
+#define read_barrier_depends()	do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#ifdef CONFIG_X86_PPRO_FENCE
+# define smp_rmb()	rmb()
+#else
+# define smp_rmb()	barrier()
+#endif
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+#else /* !SMP */
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif /* SMP */
+
+#if defined(CONFIG_X86_PPRO_FENCE)
+
+/*
+ * For this option x86 doesn't have a strong TSO memory
+ * model and we should fall back to full barriers.
+ */
+
+#define smp_store_release(p, v)						\
+do {									\
+	compiletime_assert_atomic_type(*p);				\
+	smp_mb();							\
+	ACCESS_ONCE(*p) = (v);						\
+} while (0)
+
+#define smp_load_acquire(p)						\
+({									\
+	typeof(*p) ___p1 = ACCESS_ONCE(*p);				\
+	compiletime_assert_atomic_type(*p);				\
+	smp_mb();							\
+	___p1;								\
+})
+
+#else /* regular x86 TSO memory ordering */
+
+#define smp_store_release(p, v)						\
+do {									\
+	compiletime_assert_atomic_type(*p);				\
+	barrier();							\
+	ACCESS_ONCE(*p) = (v);						\
+} while (0)
+
+#define smp_load_acquire(p)						\
+({									\
+	typeof(*p) ___p1 = ACCESS_ONCE(*p);				\
+	compiletime_assert_atomic_type(*p);				\
+	barrier();							\
+	___p1;								\
+})
+
+#endif
+
+/* Atomic operations are already serializing on x86 */
+#define smp_mb__before_atomic()	barrier()
+#define smp_mb__after_atomic()	barrier()
+
+/*
+ * Stop RDTSC speculation. This is needed when you need to use RDTSC
+ * (or get_cycles or vread that possibly accesses the TSC) in a defined
+ * code region.
+ *
+ * (Could use an alternative three way for this if there was one.)
+ */
+static __always_inline void rdtsc_barrier(void)
+{
+	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
+	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
+}
+
+#endif /* _ASM_X86_BARRIER_H */