Fixed MTP to work with TWRP

drivers/acpi/acpica/evgpe.c

@@ -0,0 +1,792 @@
+/******************************************************************************
+ *
+ * Module Name: evgpe - General Purpose Event handling and dispatch
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2014, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acevents.h"
+#include "acnamesp.h"
+
+#define _COMPONENT          ACPI_EVENTS
+ACPI_MODULE_NAME("evgpe")
+#if (!ACPI_REDUCED_HARDWARE)	/* Entire module */
+/* Local prototypes */
+static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context);
+
+static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context);
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_update_gpe_enable_mask
+ *
+ * PARAMETERS:  gpe_event_info          - GPE to update
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Updates GPE register enable mask based upon whether there are
+ *              runtime references to this GPE
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info)
+{
+	struct acpi_gpe_register_info *gpe_register_info;
+	u32 register_bit;
+
+	ACPI_FUNCTION_TRACE(ev_update_gpe_enable_mask);
+
+	gpe_register_info = gpe_event_info->register_info;
+	if (!gpe_register_info) {
+		return_ACPI_STATUS(AE_NOT_EXIST);
+	}
+
+	register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
+
+	/* Clear the run bit up front */
+
+	ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
+
+	/* Set the mask bit only if there are references to this GPE */
+
+	if (gpe_event_info->runtime_count) {
+		ACPI_SET_BIT(gpe_register_info->enable_for_run,
+			     (u8)register_bit);
+	}
+
+	return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_enable_gpe
+ *
+ * PARAMETERS:  gpe_event_info          - GPE to enable
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Clear a GPE of stale events and enable it.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+{
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE(ev_enable_gpe);
+
+	/*
+	 * We will only allow a GPE to be enabled if it has either an associated
+	 * method (_Lxx/_Exx) or a handler, or is using the implicit notify
+	 * feature. Otherwise, the GPE will be immediately disabled by
+	 * acpi_ev_gpe_dispatch the first time it fires.
+	 */
+	if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
+	    ACPI_GPE_DISPATCH_NONE) {
+		return_ACPI_STATUS(AE_NO_HANDLER);
+	}
+
+	/* Clear the GPE (of stale events) */
+
+	status = acpi_hw_clear_gpe(gpe_event_info);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Enable the requested GPE */
+
+	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_add_gpe_reference
+ *
+ * PARAMETERS:  gpe_event_info          - Add a reference to this GPE
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is
+ *              hardware-enabled.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
+{
+	acpi_status status = AE_OK;
+
+	ACPI_FUNCTION_TRACE(ev_add_gpe_reference);
+
+	if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) {
+		return_ACPI_STATUS(AE_LIMIT);
+	}
+
+	gpe_event_info->runtime_count++;
+	if (gpe_event_info->runtime_count == 1) {
+
+		/* Enable on first reference */
+
+		status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
+		if (ACPI_SUCCESS(status)) {
+			status = acpi_ev_enable_gpe(gpe_event_info);
+		}
+
+		if (ACPI_FAILURE(status)) {
+			gpe_event_info->runtime_count--;
+		}
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_remove_gpe_reference
+ *
+ * PARAMETERS:  gpe_event_info          - Remove a reference to this GPE
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Remove a reference to a GPE. When the last reference is
+ *              removed, the GPE is hardware-disabled.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
+{
+	acpi_status status = AE_OK;
+
+	ACPI_FUNCTION_TRACE(ev_remove_gpe_reference);
+
+	if (!gpe_event_info->runtime_count) {
+		return_ACPI_STATUS(AE_LIMIT);
+	}
+
+	gpe_event_info->runtime_count--;
+	if (!gpe_event_info->runtime_count) {
+
+		/* Disable on last reference */
+
+		status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
+		if (ACPI_SUCCESS(status)) {
+			status =
+			    acpi_hw_low_set_gpe(gpe_event_info,
+						ACPI_GPE_DISABLE);
+		}
+
+		if (ACPI_FAILURE(status)) {
+			gpe_event_info->runtime_count++;
+		}
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_low_get_gpe_info
+ *
+ * PARAMETERS:  gpe_number          - Raw GPE number
+ *              gpe_block           - A GPE info block
+ *
+ * RETURN:      A GPE event_info struct. NULL if not a valid GPE (The gpe_number
+ *              is not within the specified GPE block)
+ *
+ * DESCRIPTION: Returns the event_info struct associated with this GPE. This is
+ *              the low-level implementation of ev_get_gpe_event_info.
+ *
+ ******************************************************************************/
+
+struct acpi_gpe_event_info *acpi_ev_low_get_gpe_info(u32 gpe_number,
+						     struct acpi_gpe_block_info
+						     *gpe_block)
+{
+	u32 gpe_index;
+
+	/*
+	 * Validate that the gpe_number is within the specified gpe_block.
+	 * (Two steps)
+	 */
+	if (!gpe_block || (gpe_number < gpe_block->block_base_number)) {
+		return (NULL);
+	}
+
+	gpe_index = gpe_number - gpe_block->block_base_number;
+	if (gpe_index >= gpe_block->gpe_count) {
+		return (NULL);
+	}
+
+	return (&gpe_block->event_info[gpe_index]);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_get_gpe_event_info
+ *
+ * PARAMETERS:  gpe_device          - Device node. NULL for GPE0/GPE1
+ *              gpe_number          - Raw GPE number
+ *
+ * RETURN:      A GPE event_info struct. NULL if not a valid GPE
+ *
+ * DESCRIPTION: Returns the event_info struct associated with this GPE.
+ *              Validates the gpe_block and the gpe_number
+ *
+ *              Should be called only when the GPE lists are semaphore locked
+ *              and not subject to change.
+ *
+ ******************************************************************************/
+
+struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
+						       u32 gpe_number)
+{
+	union acpi_operand_object *obj_desc;
+	struct acpi_gpe_event_info *gpe_info;
+	u32 i;
+
+	ACPI_FUNCTION_ENTRY();
+
+	/* A NULL gpe_device means use the FADT-defined GPE block(s) */
+
+	if (!gpe_device) {
+
+		/* Examine GPE Block 0 and 1 (These blocks are permanent) */
+
+		for (i = 0; i < ACPI_MAX_GPE_BLOCKS; i++) {
+			gpe_info = acpi_ev_low_get_gpe_info(gpe_number,
+							    acpi_gbl_gpe_fadt_blocks
+							    [i]);
+			if (gpe_info) {
+				return (gpe_info);
+			}
+		}
+
+		/* The gpe_number was not in the range of either FADT GPE block */
+
+		return (NULL);
+	}
+
+	/* A Non-NULL gpe_device means this is a GPE Block Device */
+
+	obj_desc =
+	    acpi_ns_get_attached_object((struct acpi_namespace_node *)
+					       gpe_device);
+	if (!obj_desc || !obj_desc->device.gpe_block) {
+		return (NULL);
+	}
+
+	return (acpi_ev_low_get_gpe_info
+		(gpe_number, obj_desc->device.gpe_block));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_gpe_detect
+ *
+ * PARAMETERS:  gpe_xrupt_list      - Interrupt block for this interrupt.
+ *                                    Can have multiple GPE blocks attached.
+ *
+ * RETURN:      INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
+ *
+ * DESCRIPTION: Detect if any GP events have occurred. This function is
+ *              executed at interrupt level.
+ *
+ ******************************************************************************/
+
+u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list)
+{
+	acpi_status status;
+	struct acpi_gpe_block_info *gpe_block;
+	struct acpi_gpe_register_info *gpe_register_info;
+	u32 int_status = ACPI_INTERRUPT_NOT_HANDLED;
+	u8 enabled_status_byte;
+	u32 status_reg;
+	u32 enable_reg;
+	acpi_cpu_flags flags;
+	u32 i;
+	u32 j;
+
+	ACPI_FUNCTION_NAME(ev_gpe_detect);
+
+	/* Check for the case where there are no GPEs */
+
+	if (!gpe_xrupt_list) {
+		return (int_status);
+	}
+
+	/*
+	 * We need to obtain the GPE lock for both the data structs and registers
+	 * Note: Not necessary to obtain the hardware lock, since the GPE
+	 * registers are owned by the gpe_lock.
+	 */
+	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+
+	/* Examine all GPE blocks attached to this interrupt level */
+
+	gpe_block = gpe_xrupt_list->gpe_block_list_head;
+	while (gpe_block) {
+		/*
+		 * Read all of the 8-bit GPE status and enable registers in this GPE
+		 * block, saving all of them. Find all currently active GP events.
+		 */
+		for (i = 0; i < gpe_block->register_count; i++) {
+
+			/* Get the next status/enable pair */
+
+			gpe_register_info = &gpe_block->register_info[i];
+
+			/*
+			 * Optimization: If there are no GPEs enabled within this
+			 * register, we can safely ignore the entire register.
+			 */
+			if (!(gpe_register_info->enable_for_run |
+			      gpe_register_info->enable_for_wake)) {
+				ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS,
+						  "Ignore disabled registers for GPE %02X-%02X: "
+						  "RunEnable=%02X, WakeEnable=%02X\n",
+						  gpe_register_info->
+						  base_gpe_number,
+						  gpe_register_info->
+						  base_gpe_number +
+						  (ACPI_GPE_REGISTER_WIDTH - 1),
+						  gpe_register_info->
+						  enable_for_run,
+						  gpe_register_info->
+						  enable_for_wake));
+				continue;
+			}
+
+			/* Read the Status Register */
+
+			status =
+			    acpi_hw_read(&status_reg,
+					 &gpe_register_info->status_address);
+			if (ACPI_FAILURE(status)) {
+				goto unlock_and_exit;
+			}
+
+			/* Read the Enable Register */
+
+			status =
+			    acpi_hw_read(&enable_reg,
+					 &gpe_register_info->enable_address);
+			if (ACPI_FAILURE(status)) {
+				goto unlock_and_exit;
+			}
+
+			ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS,
+					  "Read registers for GPE %02X-%02X: Status=%02X, Enable=%02X, "
+					  "RunEnable=%02X, WakeEnable=%02X\n",
+					  gpe_register_info->base_gpe_number,
+					  gpe_register_info->base_gpe_number +
+					  (ACPI_GPE_REGISTER_WIDTH - 1),
+					  status_reg, enable_reg,
+					  gpe_register_info->enable_for_run,
+					  gpe_register_info->enable_for_wake));
+
+			/* Check if there is anything active at all in this register */
+
+			enabled_status_byte = (u8)(status_reg & enable_reg);
+			if (!enabled_status_byte) {
+
+				/* No active GPEs in this register, move on */
+
+				continue;
+			}
+
+			/* Now look at the individual GPEs in this byte register */
+
+			for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
+
+				/* Examine one GPE bit */
+
+				if (enabled_status_byte & (1 << j)) {
+					/*
+					 * Found an active GPE. Dispatch the event to a handler
+					 * or method.
+					 */
+					int_status |=
+					    acpi_ev_gpe_dispatch(gpe_block->
+								 node,
+								 &gpe_block->
+								 event_info[((acpi_size) i * ACPI_GPE_REGISTER_WIDTH) + j], j + gpe_register_info->base_gpe_number);
+				}
+			}
+		}
+
+		gpe_block = gpe_block->next;
+	}
+
+unlock_and_exit:
+
+	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+	return (int_status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_asynch_execute_gpe_method
+ *
+ * PARAMETERS:  Context (gpe_event_info) - Info for this GPE
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Perform the actual execution of a GPE control method. This
+ *              function is called from an invocation of acpi_os_execute and
+ *              therefore does NOT execute at interrupt level - so that
+ *              the control method itself is not executed in the context of
+ *              an interrupt handler.
+ *
+ ******************************************************************************/
+
+static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
+{
+	struct acpi_gpe_event_info *gpe_event_info = context;
+	acpi_status status;
+	struct acpi_gpe_event_info *local_gpe_event_info;
+	struct acpi_evaluate_info *info;
+	struct acpi_gpe_notify_info *notify;
+
+	ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method);
+
+	/* Allocate a local GPE block */
+
+	local_gpe_event_info =
+	    ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_event_info));
+	if (!local_gpe_event_info) {
+		ACPI_EXCEPTION((AE_INFO, AE_NO_MEMORY, "while handling a GPE"));
+		return_VOID;
+	}
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
+	if (ACPI_FAILURE(status)) {
+		ACPI_FREE(local_gpe_event_info);
+		return_VOID;
+	}
+
+	/* Must revalidate the gpe_number/gpe_block */
+
+	if (!acpi_ev_valid_gpe_event(gpe_event_info)) {
+		status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
+		ACPI_FREE(local_gpe_event_info);
+		return_VOID;
+	}
+
+	/*
+	 * Take a snapshot of the GPE info for this level - we copy the info to
+	 * prevent a race condition with remove_handler/remove_block.
+	 */
+	ACPI_MEMCPY(local_gpe_event_info, gpe_event_info,
+		    sizeof(struct acpi_gpe_event_info));
+
+	status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
+	if (ACPI_FAILURE(status)) {
+		ACPI_FREE(local_gpe_event_info);
+		return_VOID;
+	}
+
+	/* Do the correct dispatch - normal method or implicit notify */
+
+	switch (local_gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
+	case ACPI_GPE_DISPATCH_NOTIFY:
+		/*
+		 * Implicit notify.
+		 * Dispatch a DEVICE_WAKE notify to the appropriate handler.
+		 * NOTE: the request is queued for execution after this method
+		 * completes. The notify handlers are NOT invoked synchronously
+		 * from this thread -- because handlers may in turn run other
+		 * control methods.
+		 *
+		 * June 2012: Expand implicit notify mechanism to support
+		 * notifies on multiple device objects.
+		 */
+		notify = local_gpe_event_info->dispatch.notify_list;
+		while (ACPI_SUCCESS(status) && notify) {
+			status =
+			    acpi_ev_queue_notify_request(notify->device_node,
+							 ACPI_NOTIFY_DEVICE_WAKE);
+
+			notify = notify->next;
+		}
+
+		break;
+
+	case ACPI_GPE_DISPATCH_METHOD:
+
+		/* Allocate the evaluation information block */
+
+		info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
+		if (!info) {
+			status = AE_NO_MEMORY;
+		} else {
+			/*
+			 * Invoke the GPE Method (_Lxx, _Exx) i.e., evaluate the
+			 * _Lxx/_Exx control method that corresponds to this GPE
+			 */
+			info->prefix_node =
+			    local_gpe_event_info->dispatch.method_node;
+			info->flags = ACPI_IGNORE_RETURN_VALUE;
+
+			status = acpi_ns_evaluate(info);
+			ACPI_FREE(info);
+		}
+
+		if (ACPI_FAILURE(status)) {
+			ACPI_EXCEPTION((AE_INFO, status,
+					"while evaluating GPE method [%4.4s]",
+					acpi_ut_get_node_name
+					(local_gpe_event_info->dispatch.
+					 method_node)));
+		}
+		break;
+
+	default:
+
+		return_VOID;	/* Should never happen */
+	}
+
+	/* Defer enabling of GPE until all notify handlers are done */
+
+	status = acpi_os_execute(OSL_NOTIFY_HANDLER,
+				 acpi_ev_asynch_enable_gpe,
+				 local_gpe_event_info);
+	if (ACPI_FAILURE(status)) {
+		ACPI_FREE(local_gpe_event_info);
+	}
+	return_VOID;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_asynch_enable_gpe
+ *
+ * PARAMETERS:  Context (gpe_event_info) - Info for this GPE
+ *              Callback from acpi_os_execute
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Asynchronous clear/enable for GPE. This allows the GPE to
+ *              complete (i.e., finish execution of Notify)
+ *
+ ******************************************************************************/
+
+static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context)
+{
+	struct acpi_gpe_event_info *gpe_event_info = context;
+
+	(void)acpi_ev_finish_gpe(gpe_event_info);
+
+	ACPI_FREE(gpe_event_info);
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_finish_gpe
+ *
+ * PARAMETERS:  gpe_event_info      - Info for this GPE
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Clear/Enable a GPE. Common code that is used after execution
+ *              of a GPE method or a synchronous or asynchronous GPE handler.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ev_finish_gpe(struct acpi_gpe_event_info * gpe_event_info)
+{
+	acpi_status status;
+
+	if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
+	    ACPI_GPE_LEVEL_TRIGGERED) {
+		/*
+		 * GPE is level-triggered, we clear the GPE status bit after
+		 * handling the event.
+		 */
+		status = acpi_hw_clear_gpe(gpe_event_info);
+		if (ACPI_FAILURE(status)) {
+			return (status);
+		}
+	}
+
+	/*
+	 * Enable this GPE, conditionally. This means that the GPE will
+	 * only be physically enabled if the enable_for_run bit is set
+	 * in the event_info.
+	 */
+	(void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_CONDITIONAL_ENABLE);
+	return (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_gpe_dispatch
+ *
+ * PARAMETERS:  gpe_device          - Device node. NULL for GPE0/GPE1
+ *              gpe_event_info      - Info for this GPE
+ *              gpe_number          - Number relative to the parent GPE block
+ *
+ * RETURN:      INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
+ *
+ * DESCRIPTION: Dispatch a General Purpose Event to either a function (e.g. EC)
+ *              or method (e.g. _Lxx/_Exx) handler.
+ *
+ *              This function executes at interrupt level.
+ *
+ ******************************************************************************/
+
+u32
+acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device,
+		     struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
+{
+	acpi_status status;
+	u32 return_value;
+
+	ACPI_FUNCTION_TRACE(ev_gpe_dispatch);
+
+	/* Invoke global event handler if present */
+
+	acpi_gpe_count++;
+	if (acpi_gbl_global_event_handler) {
+		acpi_gbl_global_event_handler(ACPI_EVENT_TYPE_GPE, gpe_device,
+					      gpe_number,
+					      acpi_gbl_global_event_handler_context);
+	}
+
+	/*
+	 * Always disable the GPE so that it does not keep firing before
+	 * any asynchronous activity completes (either from the execution
+	 * of a GPE method or an asynchronous GPE handler.)
+	 *
+	 * If there is no handler or method to run, just disable the
+	 * GPE and leave it disabled permanently to prevent further such
+	 * pointless events from firing.
+	 */
+	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
+	if (ACPI_FAILURE(status)) {
+		ACPI_EXCEPTION((AE_INFO, status,
+				"Unable to disable GPE %02X", gpe_number));
+		return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
+	}
+
+	/*
+	 * If edge-triggered, clear the GPE status bit now. Note that
+	 * level-triggered events are cleared after the GPE is serviced.
+	 */
+	if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
+	    ACPI_GPE_EDGE_TRIGGERED) {
+		status = acpi_hw_clear_gpe(gpe_event_info);
+		if (ACPI_FAILURE(status)) {
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Unable to clear GPE %02X",
+					gpe_number));
+			(void)acpi_hw_low_set_gpe(gpe_event_info,
+						  ACPI_GPE_CONDITIONAL_ENABLE);
+			return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
+		}
+	}
+
+	/*
+	 * Dispatch the GPE to either an installed handler or the control
+	 * method associated with this GPE (_Lxx or _Exx). If a handler
+	 * exists, we invoke it and do not attempt to run the method.
+	 * If there is neither a handler nor a method, leave the GPE
+	 * disabled.
+	 */
+	switch (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
+	case ACPI_GPE_DISPATCH_HANDLER:
+
+		/* Invoke the installed handler (at interrupt level) */
+
+		return_value =
+		    gpe_event_info->dispatch.handler->address(gpe_device,
+							      gpe_number,
+							      gpe_event_info->
+							      dispatch.handler->
+							      context);
+
+		/* If requested, clear (if level-triggered) and reenable the GPE */
+
+		if (return_value & ACPI_REENABLE_GPE) {
+			(void)acpi_ev_finish_gpe(gpe_event_info);
+		}
+		break;
+
+	case ACPI_GPE_DISPATCH_METHOD:
+	case ACPI_GPE_DISPATCH_NOTIFY:
+		/*
+		 * Execute the method associated with the GPE
+		 * NOTE: Level-triggered GPEs are cleared after the method completes.
+		 */
+		status = acpi_os_execute(OSL_GPE_HANDLER,
+					 acpi_ev_asynch_execute_gpe_method,
+					 gpe_event_info);
+		if (ACPI_FAILURE(status)) {
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Unable to queue handler for GPE %02X - event disabled",
+					gpe_number));
+		}
+		break;
+
+	default:
+		/*
+		 * No handler or method to run!
+		 * 03/2010: This case should no longer be possible. We will not allow
+		 * a GPE to be enabled if it has no handler or method.
+		 */
+		ACPI_ERROR((AE_INFO,
+			    "No handler or method for GPE %02X, disabling event",
+			    gpe_number));
+
+		break;
+	}
+
+	return_UINT32(ACPI_INTERRUPT_HANDLED);
+}
+
+#endif				/* !ACPI_REDUCED_HARDWARE */