Fixed MTP to work with TWRP

drivers/ata/pata_netcell.c

@@ -0,0 +1,107 @@
+/*
+ *    pata_netcell.c - Netcell PATA driver
+ *
+ *	(c) 2006 Red Hat
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/ata.h>
+
+#define DRV_NAME	"pata_netcell"
+#define DRV_VERSION	"0.1.7"
+
+/* No PIO or DMA methods needed for this device */
+
+static unsigned int netcell_read_id(struct ata_device *adev,
+					struct ata_taskfile *tf, u16 *id)
+{
+	unsigned int err_mask = ata_do_dev_read_id(adev, tf, id);
+	/* Firmware forgets to mark words 85-87 valid */
+	if (err_mask == 0)
+		id[ATA_ID_CSF_DEFAULT] |= 0x4000;
+	return err_mask;
+}
+
+static struct scsi_host_template netcell_sht = {
+	ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations netcell_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.cable_detect	= ata_cable_80wire,
+	.read_id	= netcell_read_id,
+};
+
+
+/**
+ *	netcell_init_one - Register Netcell ATA PCI device with kernel services
+ *	@pdev: PCI device to register
+ *	@ent: Entry in netcell_pci_tbl matching with @pdev
+ *
+ *	Called from kernel PCI layer.
+ *
+ *	LOCKING:
+ *	Inherited from PCI layer (may sleep).
+ *
+ *	RETURNS:
+ *	Zero on success, or -ERRNO value.
+ */
+
+static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	static const struct ata_port_info info = {
+		.flags		= ATA_FLAG_SLAVE_POSS,
+		/* Actually we don't really care about these as the
+		   firmware deals with it */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask 	= ATA_UDMA5, /* UDMA 133 */
+		.port_ops	= &netcell_ops,
+	};
+	const struct ata_port_info *port_info[] = { &info, NULL };
+	int rc;
+
+	ata_print_version_once(&pdev->dev, DRV_VERSION);
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	/* Any chip specific setup/optimisation/messages here */
+	ata_pci_bmdma_clear_simplex(pdev);
+
+	/* And let the library code do the work */
+	return ata_pci_bmdma_init_one(pdev, port_info, &netcell_sht, NULL, 0);
+}
+
+static const struct pci_device_id netcell_pci_tbl[] = {
+	{ PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), },
+
+	{ }	/* terminate list */
+};
+
+static struct pci_driver netcell_pci_driver = {
+	.name			= DRV_NAME,
+	.id_table		= netcell_pci_tbl,
+	.probe			= netcell_init_one,
+	.remove			= ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
+#endif
+};
+
+module_pci_driver(netcell_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, netcell_pci_tbl);
+MODULE_VERSION(DRV_VERSION);