Fixed MTP to work with TWRP

drivers/gpu/drm/gma500/mdfld_device.c

@@ -0,0 +1,551 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include "psb_drv.h"
+#include "mid_bios.h"
+#include "mdfld_output.h"
+#include "mdfld_dsi_output.h"
+#include "tc35876x-dsi-lvds.h"
+
+#include <asm/intel_scu_ipc.h>
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+
+#define MRST_BLC_MAX_PWM_REG_FREQ	    0xFFFF
+#define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
+#define BLC_PWM_FREQ_CALC_CONSTANT 32
+#define MHz 1000000
+#define BRIGHTNESS_MIN_LEVEL 1
+#define BRIGHTNESS_MAX_LEVEL 100
+#define BRIGHTNESS_MASK	0xFF
+#define BLC_POLARITY_NORMAL 0
+#define BLC_POLARITY_INVERSE 1
+#define BLC_ADJUSTMENT_MAX 100
+
+#define MDFLD_BLC_PWM_PRECISION_FACTOR    10
+#define MDFLD_BLC_MAX_PWM_REG_FREQ        0xFFFE
+#define MDFLD_BLC_MIN_PWM_REG_FREQ        0x2
+
+#define MDFLD_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
+#define MDFLD_BACKLIGHT_PWM_CTL_SHIFT	(16)
+
+static struct backlight_device *mdfld_backlight_device;
+
+int mdfld_set_brightness(struct backlight_device *bd)
+{
+	struct drm_device *dev =
+		(struct drm_device *)bl_get_data(mdfld_backlight_device);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int level = bd->props.brightness;
+
+	DRM_DEBUG_DRIVER("backlight level set to %d\n", level);
+
+	/* Perform value bounds checking */
+	if (level < BRIGHTNESS_MIN_LEVEL)
+		level = BRIGHTNESS_MIN_LEVEL;
+
+	if (gma_power_begin(dev, false)) {
+		u32 adjusted_level = 0;
+
+		/*
+		 * Adjust the backlight level with the percent in
+		 * dev_priv->blc_adj2
+		 */
+		adjusted_level = level * dev_priv->blc_adj2;
+		adjusted_level = adjusted_level / BLC_ADJUSTMENT_MAX;
+		dev_priv->brightness_adjusted = adjusted_level;
+
+		if (mdfld_get_panel_type(dev, 0) == TC35876X) {
+			if (dev_priv->dpi_panel_on[0] ||
+					dev_priv->dpi_panel_on[2])
+				tc35876x_brightness_control(dev,
+						dev_priv->brightness_adjusted);
+		} else {
+			if (dev_priv->dpi_panel_on[0])
+				mdfld_dsi_brightness_control(dev, 0,
+						dev_priv->brightness_adjusted);
+		}
+
+		if (dev_priv->dpi_panel_on[2])
+			mdfld_dsi_brightness_control(dev, 2,
+					dev_priv->brightness_adjusted);
+		gma_power_end(dev);
+	}
+
+	/* cache the brightness for later use */
+	dev_priv->brightness = level;
+	return 0;
+}
+
+static int mdfld_get_brightness(struct backlight_device *bd)
+{
+	struct drm_device *dev =
+		(struct drm_device *)bl_get_data(mdfld_backlight_device);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	DRM_DEBUG_DRIVER("brightness = 0x%x \n", dev_priv->brightness);
+
+	/* return locally cached var instead of HW read (due to DPST etc.) */
+	return dev_priv->brightness;
+}
+
+static const struct backlight_ops mdfld_ops = {
+	.get_brightness = mdfld_get_brightness,
+	.update_status  = mdfld_set_brightness,
+};
+
+static int device_backlight_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = (struct drm_psb_private *)
+		dev->dev_private;
+
+	dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX;
+	dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX;
+
+	return 0;
+}
+
+static int mdfld_backlight_init(struct drm_device *dev)
+{
+	struct backlight_properties props;
+	int ret = 0;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = BRIGHTNESS_MAX_LEVEL;
+	props.type = BACKLIGHT_PLATFORM;
+	mdfld_backlight_device = backlight_device_register("mdfld-bl",
+				NULL, (void *)dev, &mdfld_ops, &props);
+
+	if (IS_ERR(mdfld_backlight_device))
+		return PTR_ERR(mdfld_backlight_device);
+
+	ret = device_backlight_init(dev);
+	if (ret)
+		return ret;
+
+	mdfld_backlight_device->props.brightness = BRIGHTNESS_MAX_LEVEL;
+	mdfld_backlight_device->props.max_brightness = BRIGHTNESS_MAX_LEVEL;
+	backlight_update_status(mdfld_backlight_device);
+	return 0;
+}
+#endif
+
+struct backlight_device *mdfld_get_backlight_device(void)
+{
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	return mdfld_backlight_device;
+#else
+	return NULL;
+#endif
+}
+
+/*
+ * mdfld_save_display_registers
+ *
+ * Description: We are going to suspend so save current display
+ * register state.
+ *
+ * Notes: FIXME_JLIU7 need to add the support for DPI MIPI & HDMI audio
+ */
+static int mdfld_save_display_registers(struct drm_device *dev, int pipenum)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct medfield_state *regs = &dev_priv->regs.mdfld;
+	struct psb_pipe *pipe = &dev_priv->regs.pipe[pipenum];
+	const struct psb_offset *map = &dev_priv->regmap[pipenum];
+	int i;
+	u32 *mipi_val;
+
+	/* register */
+	u32 mipi_reg = MIPI;
+
+	switch (pipenum) {
+	case 0:
+		mipi_val = &regs->saveMIPI;
+		break;
+	case 1:
+		mipi_val = &regs->saveMIPI;
+		break;
+	case 2:
+		/* register */
+		mipi_reg = MIPI_C;
+		/* pointer to values */
+		mipi_val = &regs->saveMIPI_C;
+		break;
+	default:
+		DRM_ERROR("%s, invalid pipe number.\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Pipe & plane A info */
+	pipe->dpll = PSB_RVDC32(map->dpll);
+	pipe->fp0 = PSB_RVDC32(map->fp0);
+	pipe->conf = PSB_RVDC32(map->conf);
+	pipe->htotal = PSB_RVDC32(map->htotal);
+	pipe->hblank = PSB_RVDC32(map->hblank);
+	pipe->hsync = PSB_RVDC32(map->hsync);
+	pipe->vtotal = PSB_RVDC32(map->vtotal);
+	pipe->vblank = PSB_RVDC32(map->vblank);
+	pipe->vsync = PSB_RVDC32(map->vsync);
+	pipe->src = PSB_RVDC32(map->src);
+	pipe->stride = PSB_RVDC32(map->stride);
+	pipe->linoff = PSB_RVDC32(map->linoff);
+	pipe->tileoff = PSB_RVDC32(map->tileoff);
+	pipe->size = PSB_RVDC32(map->size);
+	pipe->pos = PSB_RVDC32(map->pos);
+	pipe->surf = PSB_RVDC32(map->surf);
+	pipe->cntr = PSB_RVDC32(map->cntr);
+	pipe->status = PSB_RVDC32(map->status);
+
+	/*save palette (gamma) */
+	for (i = 0; i < 256; i++)
+		pipe->palette[i] = PSB_RVDC32(map->palette + (i << 2));
+
+	if (pipenum == 1) {
+		regs->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
+		regs->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
+
+		regs->saveHDMIPHYMISCCTL = PSB_RVDC32(HDMIPHYMISCCTL);
+		regs->saveHDMIB_CONTROL = PSB_RVDC32(HDMIB_CONTROL);
+		return 0;
+	}
+
+	*mipi_val = PSB_RVDC32(mipi_reg);
+	return 0;
+}
+
+/*
+ * mdfld_restore_display_registers
+ *
+ * Description: We are going to resume so restore display register state.
+ *
+ * Notes: FIXME_JLIU7 need to add the support for DPI MIPI & HDMI audio
+ */
+static int mdfld_restore_display_registers(struct drm_device *dev, int pipenum)
+{
+	/* To get  panel out of ULPS mode. */
+	u32 temp = 0;
+	u32 device_ready_reg = DEVICE_READY_REG;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct mdfld_dsi_config *dsi_config = NULL;
+	struct medfield_state *regs = &dev_priv->regs.mdfld;
+	struct psb_pipe *pipe = &dev_priv->regs.pipe[pipenum];
+	const struct psb_offset *map = &dev_priv->regmap[pipenum];
+	u32 i;
+	u32 dpll;
+	u32 timeout = 0;
+
+	/* register */
+	u32 mipi_reg = MIPI;
+
+	/* values */
+	u32 dpll_val = pipe->dpll;
+	u32 mipi_val = regs->saveMIPI;
+
+	switch (pipenum) {
+	case 0:
+		dpll_val &= ~DPLL_VCO_ENABLE;
+		dsi_config = dev_priv->dsi_configs[0];
+		break;
+	case 1:
+		dpll_val &= ~DPLL_VCO_ENABLE;
+		break;
+	case 2:
+		mipi_reg = MIPI_C;
+		mipi_val = regs->saveMIPI_C;
+		dsi_config = dev_priv->dsi_configs[1];
+		break;
+	default:
+		DRM_ERROR("%s, invalid pipe number.\n", __func__);
+		return -EINVAL;
+	}
+
+	/*make sure VGA plane is off. it initializes to on after reset!*/
+	PSB_WVDC32(0x80000000, VGACNTRL);
+
+	if (pipenum == 1) {
+		PSB_WVDC32(dpll_val & ~DPLL_VCO_ENABLE, map->dpll);
+		PSB_RVDC32(map->dpll);
+
+		PSB_WVDC32(pipe->fp0, map->fp0);
+	} else {
+
+		dpll = PSB_RVDC32(map->dpll);
+
+		if (!(dpll & DPLL_VCO_ENABLE)) {
+
+			/* When ungating power of DPLL, needs to wait 0.5us
+			   before enable the VCO */
+			if (dpll & MDFLD_PWR_GATE_EN) {
+				dpll &= ~MDFLD_PWR_GATE_EN;
+				PSB_WVDC32(dpll, map->dpll);
+				/* FIXME_MDFLD PO - change 500 to 1 after PO */
+				udelay(500);
+			}
+
+			PSB_WVDC32(pipe->fp0, map->fp0);
+			PSB_WVDC32(dpll_val, map->dpll);
+			/* FIXME_MDFLD PO - change 500 to 1 after PO */
+			udelay(500);
+
+			dpll_val |= DPLL_VCO_ENABLE;
+			PSB_WVDC32(dpll_val, map->dpll);
+			PSB_RVDC32(map->dpll);
+
+			/* wait for DSI PLL to lock */
+			while (timeout < 20000 &&
+			  !(PSB_RVDC32(map->conf) & PIPECONF_DSIPLL_LOCK)) {
+				udelay(150);
+				timeout++;
+			}
+
+			if (timeout == 20000) {
+				DRM_ERROR("%s, can't lock DSIPLL.\n",
+								__func__);
+				return -EINVAL;
+			}
+		}
+	}
+	/* Restore mode */
+	PSB_WVDC32(pipe->htotal, map->htotal);
+	PSB_WVDC32(pipe->hblank, map->hblank);
+	PSB_WVDC32(pipe->hsync, map->hsync);
+	PSB_WVDC32(pipe->vtotal, map->vtotal);
+	PSB_WVDC32(pipe->vblank, map->vblank);
+	PSB_WVDC32(pipe->vsync, map->vsync);
+	PSB_WVDC32(pipe->src, map->src);
+	PSB_WVDC32(pipe->status, map->status);
+
+	/*set up the plane*/
+	PSB_WVDC32(pipe->stride, map->stride);
+	PSB_WVDC32(pipe->linoff, map->linoff);
+	PSB_WVDC32(pipe->tileoff, map->tileoff);
+	PSB_WVDC32(pipe->size, map->size);
+	PSB_WVDC32(pipe->pos, map->pos);
+	PSB_WVDC32(pipe->surf, map->surf);
+
+	if (pipenum == 1) {
+		/* restore palette (gamma) */
+		/*DRM_UDELAY(50000); */
+		for (i = 0; i < 256; i++)
+			PSB_WVDC32(pipe->palette[i], map->palette + (i << 2));
+
+		PSB_WVDC32(regs->savePFIT_CONTROL, PFIT_CONTROL);
+		PSB_WVDC32(regs->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
+
+		/*TODO: resume HDMI port */
+
+		/*TODO: resume pipe*/
+
+		/*enable the plane*/
+		PSB_WVDC32(pipe->cntr & ~DISPLAY_PLANE_ENABLE, map->cntr);
+
+		return 0;
+	}
+
+	/*set up pipe related registers*/
+	PSB_WVDC32(mipi_val, mipi_reg);
+
+	/*setup MIPI adapter + MIPI IP registers*/
+	if (dsi_config)
+		mdfld_dsi_controller_init(dsi_config, pipenum);
+
+	if (in_atomic() || in_interrupt())
+		mdelay(20);
+	else
+		msleep(20);
+
+	/*enable the plane*/
+	PSB_WVDC32(pipe->cntr, map->cntr);
+
+	if (in_atomic() || in_interrupt())
+		mdelay(20);
+	else
+		msleep(20);
+
+	/* LP Hold Release */
+	temp = REG_READ(mipi_reg);
+	temp |= LP_OUTPUT_HOLD_RELEASE;
+	REG_WRITE(mipi_reg, temp);
+	mdelay(1);
+
+
+	/* Set DSI host to exit from Utra Low Power State */
+	temp = REG_READ(device_ready_reg);
+	temp &= ~ULPS_MASK;
+	temp |= 0x3;
+	temp |= EXIT_ULPS_DEV_READY;
+	REG_WRITE(device_ready_reg, temp);
+	mdelay(1);
+
+	temp = REG_READ(device_ready_reg);
+	temp &= ~ULPS_MASK;
+	temp |= EXITING_ULPS;
+	REG_WRITE(device_ready_reg, temp);
+	mdelay(1);
+
+	/*enable the pipe*/
+	PSB_WVDC32(pipe->conf, map->conf);
+
+	/* restore palette (gamma) */
+	/*DRM_UDELAY(50000); */
+	for (i = 0; i < 256; i++)
+		PSB_WVDC32(pipe->palette[i], map->palette + (i << 2));
+
+	return 0;
+}
+
+static int mdfld_save_registers(struct drm_device *dev)
+{
+	/* mdfld_save_cursor_overlay_registers(dev); */
+	mdfld_save_display_registers(dev, 0);
+	mdfld_save_display_registers(dev, 2);
+	mdfld_disable_crtc(dev, 0);
+	mdfld_disable_crtc(dev, 2);
+
+	return 0;
+}
+
+static int mdfld_restore_registers(struct drm_device *dev)
+{
+	mdfld_restore_display_registers(dev, 2);
+	mdfld_restore_display_registers(dev, 0);
+	/* mdfld_restore_cursor_overlay_registers(dev); */
+
+	return 0;
+}
+
+static int mdfld_power_down(struct drm_device *dev)
+{
+	/* FIXME */
+	return 0;
+}
+
+static int mdfld_power_up(struct drm_device *dev)
+{
+	/* FIXME */
+	return 0;
+}
+
+/* Medfield  */
+static const struct psb_offset mdfld_regmap[3] = {
+	{
+		.fp0 = MRST_FPA0,
+		.fp1 = MRST_FPA1,
+		.cntr = DSPACNTR,
+		.conf = PIPEACONF,
+		.src = PIPEASRC,
+		.dpll = MRST_DPLL_A,
+		.htotal = HTOTAL_A,
+		.hblank = HBLANK_A,
+		.hsync = HSYNC_A,
+		.vtotal = VTOTAL_A,
+		.vblank = VBLANK_A,
+		.vsync = VSYNC_A,
+		.stride = DSPASTRIDE,
+		.size = DSPASIZE,
+		.pos = DSPAPOS,
+		.surf = DSPASURF,
+		.addr = MRST_DSPABASE,
+		.status = PIPEASTAT,
+		.linoff = DSPALINOFF,
+		.tileoff = DSPATILEOFF,
+		.palette = PALETTE_A,
+	},
+	{
+		.fp0 = MDFLD_DPLL_DIV0,
+		.cntr = DSPBCNTR,
+		.conf = PIPEBCONF,
+		.src = PIPEBSRC,
+		.dpll = MDFLD_DPLL_B,
+		.htotal = HTOTAL_B,
+		.hblank = HBLANK_B,
+		.hsync = HSYNC_B,
+		.vtotal = VTOTAL_B,
+		.vblank = VBLANK_B,
+		.vsync = VSYNC_B,
+		.stride = DSPBSTRIDE,
+		.size = DSPBSIZE,
+		.pos = DSPBPOS,
+		.surf = DSPBSURF,
+		.addr = MRST_DSPBBASE,
+		.status = PIPEBSTAT,
+		.linoff = DSPBLINOFF,
+		.tileoff = DSPBTILEOFF,
+		.palette = PALETTE_B,
+	},
+	{
+		.fp0 = MRST_FPA0,	/* This is what the old code did ?? */
+		.cntr = DSPCCNTR,
+		.conf = PIPECCONF,
+		.src = PIPECSRC,
+		/* No DPLL_C */
+		.dpll = MRST_DPLL_A,
+		.htotal = HTOTAL_C,
+		.hblank = HBLANK_C,
+		.hsync = HSYNC_C,
+		.vtotal = VTOTAL_C,
+		.vblank = VBLANK_C,
+		.vsync = VSYNC_C,
+		.stride = DSPCSTRIDE,
+		.size = DSPBSIZE,
+		.pos = DSPCPOS,
+		.surf = DSPCSURF,
+		.addr = MDFLD_DSPCBASE,
+		.status = PIPECSTAT,
+		.linoff = DSPCLINOFF,
+		.tileoff = DSPCTILEOFF,
+		.palette = PALETTE_C,
+	},
+};
+
+static int mdfld_chip_setup(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	if (pci_enable_msi(dev->pdev))
+		dev_warn(dev->dev, "Enabling MSI failed!\n");
+	dev_priv->regmap = mdfld_regmap;
+	return mid_chip_setup(dev);
+}
+
+const struct psb_ops mdfld_chip_ops = {
+	.name = "mdfld",
+	.accel_2d = 0,
+	.pipes = 3,
+	.crtcs = 3,
+	.lvds_mask = (1 << 1),
+	.hdmi_mask = (1 << 1),
+	.cursor_needs_phys = 0,
+	.sgx_offset = MRST_SGX_OFFSET,
+
+	.chip_setup = mdfld_chip_setup,
+	.crtc_helper = &mdfld_helper_funcs,
+	.crtc_funcs = &psb_intel_crtc_funcs,
+
+	.output_init = mdfld_output_init,
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	.backlight_init = mdfld_backlight_init,
+#endif
+
+	.save_regs = mdfld_save_registers,
+	.restore_regs = mdfld_restore_registers,
+	.power_down = mdfld_power_down,
+	.power_up = mdfld_power_up,
+};