Fixed MTP to work with TWRP

drivers/mmc/Kconfig

@@ -0,0 +1,35 @@
+#
+# MMC subsystem configuration
+#
+
+menuconfig MMC
+	tristate "MMC/SD/SDIO card support"
+	depends on HAS_IOMEM
+	help
+	  This selects MultiMediaCard, Secure Digital and Secure
+	  Digital I/O support.
+
+	  If you want MMC/SD/SDIO support, you should say Y here and
+	  also to your specific host controller driver.
+
+config MMC_DEBUG
+	bool "MMC debugging"
+	depends on MMC != n
+	help
+	  This is an option for use by developers; most people should
+	  say N here.  This enables MMC core and driver debugging.
+
+config MMC_BLOCK_DEFERRED_RESUME
+	bool "Enable Deferred Resume"
+	depends on MMC != n
+	default n
+
+if MMC
+
+source "drivers/mmc/core/Kconfig"
+
+source "drivers/mmc/card/Kconfig"
+
+source "drivers/mmc/host/Kconfig"
+
+endif # MMC

drivers/mmc/Makefile

@@ -0,0 +1,9 @@
+#
+# Makefile for the kernel mmc device drivers.
+#
+
+subdir-ccflags-$(CONFIG_MMC_DEBUG) := -DDEBUG
+
+obj-$(CONFIG_MMC)		+= core/
+obj-$(CONFIG_MMC)		+= card/
+obj-$(subst m,y,$(CONFIG_MMC))	+= host/

drivers/mmc/card/Kconfig

@@ -0,0 +1,70 @@
+#
+# MMC/SD card drivers
+#
+
+comment "MMC/SD/SDIO Card Drivers"
+
+config MMC_BLOCK
+	tristate "MMC block device driver"
+	depends on BLOCK
+	default y
+	help
+	  Say Y here to enable the MMC block device driver support.
+	  This provides a block device driver, which you can use to
+	  mount the filesystem. Almost everyone wishing MMC support
+	  should say Y or M here.
+
+config MMC_BLOCK_MINORS
+	int "Number of minors per block device"
+	depends on MMC_BLOCK
+	range 4 256
+	default 8
+	help
+	  Number of minors per block device. One is needed for every
+	  partition on the disk (plus one for the whole disk).
+
+	  Number of total MMC minors available is 256, so your number
+	  of supported block devices will be limited to 256 divided
+	  by this number.
+
+	  Default is 8 to be backwards compatible with previous
+	  hardwired device numbering.
+
+	  If unsure, say 8 here.
+
+config MMC_BLOCK_BOUNCE
+	bool "Use bounce buffer for simple hosts"
+	depends on MMC_BLOCK
+	default y
+	help
+	  SD/MMC is a high latency protocol where it is crucial to
+	  send large requests in order to get high performance. Many
+	  controllers, however, are restricted to continuous memory
+	  (i.e. they can't do scatter-gather), something the kernel
+	  rarely can provide.
+
+	  Say Y here to help these restricted hosts by bouncing
+	  requests back and forth from a large buffer. You will get
+	  a big performance gain at the cost of up to 64 KiB of
+	  physical memory.
+
+	  If unsure, say Y here.
+
+config SDIO_UART
+	tristate "SDIO UART/GPS class support"
+	depends on TTY
+	help
+	  SDIO function driver for SDIO cards that implements the UART
+	  class, as well as the GPS class which appears like a UART.
+
+config MMC_TEST
+	tristate "MMC host test driver"
+	help
+	  Development driver that performs a series of reads and writes
+	  to a memory card in order to expose certain well known bugs
+	  in host controllers. The tests are executed by writing to the
+	  "test" file in debugfs under each card. Note that whatever is
+	  on your card will be overwritten by these tests.
+
+	  This driver is only of interest to those developing or
+	  testing a host driver. Most people should say N here.

drivers/mmc/card/Makefile

@@ -0,0 +1,10 @@
+#
+# Makefile for MMC/SD card drivers
+#
+
+obj-$(CONFIG_MMC_BLOCK)		+= mmc_block.o
+mmc_block-objs			:= block.o queue.o
+obj-$(CONFIG_MMC_TEST)		+= mmc_test.o
+
+obj-$(CONFIG_SDIO_UART)		+= sdio_uart.o
+

drivers/mmc/card/queue.c

@@ -0,0 +1,592 @@
+/*
+ *  linux/drivers/mmc/card/queue.c
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *  Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/blkdev.h>
+#include <linux/freezer.h>
+#include <linux/kthread.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/version.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include "queue.h"
+
+#define MMC_QUEUE_BOUNCESZ	65536
+
+/*
+ * Prepare a MMC request. This just filters out odd stuff.
+ */
+static int mmc_prep_request(struct request_queue *q, struct request *req)
+{
+	struct mmc_queue *mq = q->queuedata;
+
+	/*
+	 * We only like normal block requests and discards.
+	 */
+	if (req->cmd_type != REQ_TYPE_FS && !(req->cmd_flags & REQ_DISCARD)) {
+		blk_dump_rq_flags(req, "MMC bad request");
+		return BLKPREP_KILL;
+	}
+
+	if (mq && mmc_card_removed(mq->card))
+		return BLKPREP_KILL;
+
+	req->cmd_flags |= REQ_DONTPREP;
+
+	return BLKPREP_OK;
+}
+
+static int mmc_queue_thread(void *d)
+{
+	struct mmc_queue *mq = d;
+	struct request_queue *q = mq->queue;
+
+	current->flags |= PF_MEMALLOC;
+
+	down(&mq->thread_sem);
+	do {
+		struct request *req = NULL;
+		struct mmc_queue_req *tmp;
+		unsigned int cmd_flags = 0;
+
+		spin_lock_irq(q->queue_lock);
+		set_current_state(TASK_INTERRUPTIBLE);
+		req = blk_fetch_request(q);
+		mq->mqrq_cur->req = req;
+		spin_unlock_irq(q->queue_lock);
+
+		if (req || mq->mqrq_prev->req) {
+			set_current_state(TASK_RUNNING);
+			cmd_flags = req ? req->cmd_flags : 0;
+			mq->issue_fn(mq, req);
+			if (mq->flags & MMC_QUEUE_NEW_REQUEST) {
+				mq->flags &= ~MMC_QUEUE_NEW_REQUEST;
+				continue; /* fetch again */
+			}
+
+			/*
+			 * Current request becomes previous request
+			 * and vice versa.
+			 * In case of special requests, current request
+			 * has been finished. Do not assign it to previous
+			 * request.
+			 */
+			if (cmd_flags & MMC_REQ_SPECIAL_MASK)
+				mq->mqrq_cur->req = NULL;
+
+			mq->mqrq_prev->brq.mrq.data = NULL;
+			mq->mqrq_prev->req = NULL;
+			tmp = mq->mqrq_prev;
+			mq->mqrq_prev = mq->mqrq_cur;
+			mq->mqrq_cur = tmp;
+		} else {
+			if (kthread_should_stop()) {
+				set_current_state(TASK_RUNNING);
+				break;
+			}
+			up(&mq->thread_sem);
+			schedule();
+			down(&mq->thread_sem);
+		}
+	} while (1);
+	up(&mq->thread_sem);
+
+	return 0;
+}
+
+/*
+ * Generic MMC request handler.  This is called for any queue on a
+ * particular host.  When the host is not busy, we look for a request
+ * on any queue on this host, and attempt to issue it.  This may
+ * not be the queue we were asked to process.
+ */
+static void mmc_request_fn(struct request_queue *q)
+{
+	struct mmc_queue *mq = q->queuedata;
+	struct request *req;
+	unsigned long flags;
+	struct mmc_context_info *cntx;
+
+	if (!mq) {
+		while ((req = blk_fetch_request(q)) != NULL) {
+			req->cmd_flags |= REQ_QUIET;
+			__blk_end_request_all(req, -EIO);
+		}
+		return;
+	}
+
+	cntx = &mq->card->host->context_info;
+	if (!mq->mqrq_cur->req && mq->mqrq_prev->req) {
+		/*
+		 * New MMC request arrived when MMC thread may be
+		 * blocked on the previous request to be complete
+		 * with no current request fetched
+		 */
+		spin_lock_irqsave(&cntx->lock, flags);
+		if (cntx->is_waiting_last_req) {
+			cntx->is_new_req = true;
+			wake_up_interruptible(&cntx->wait);
+		}
+		spin_unlock_irqrestore(&cntx->lock, flags);
+	} else if (!mq->mqrq_cur->req && !mq->mqrq_prev->req)
+		wake_up_process(mq->thread);
+}
+
+static struct scatterlist *mmc_alloc_sg(int sg_len, int *err)
+{
+	struct scatterlist *sg;
+
+	sg = kmalloc(sizeof(struct scatterlist)*sg_len, GFP_KERNEL);
+	if (!sg)
+		*err = -ENOMEM;
+	else {
+		*err = 0;
+		sg_init_table(sg, sg_len);
+	}
+
+	return sg;
+}
+
+static void mmc_queue_setup_discard(struct request_queue *q,
+				    struct mmc_card *card)
+{
+	unsigned max_discard;
+
+	max_discard = mmc_calc_max_discard(card);
+	if (!max_discard)
+		return;
+
+	queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
+	q->limits.max_discard_sectors = max_discard;
+	if (card->erased_byte == 0 && !mmc_can_discard(card))
+		q->limits.discard_zeroes_data = 1;
+	q->limits.discard_granularity = card->pref_erase << 9;
+	/* granularity must not be greater than max. discard */
+	if (card->pref_erase > max_discard)
+		q->limits.discard_granularity = 0;
+	if (mmc_can_secure_erase_trim(card))
+		queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, q);
+}
+
+/**
+ * mmc_init_queue - initialise a queue structure.
+ * @mq: mmc queue
+ * @card: mmc card to attach this queue
+ * @lock: queue lock
+ * @subname: partition subname
+ *
+ * Initialise a MMC card request queue.
+ */
+int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
+		   spinlock_t *lock, const char *subname)
+{
+	struct mmc_host *host = card->host;
+	u64 limit = BLK_BOUNCE_HIGH;
+	int ret;
+	struct mmc_queue_req *mqrq_cur = &mq->mqrq[0];
+	struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];
+
+	if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
+		limit = (u64)dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT;
+
+	mq->card = card;
+	mq->queue = blk_init_queue(mmc_request_fn, lock);
+	if (!mq->queue)
+		return -ENOMEM;
+
+	mq->mqrq_cur = mqrq_cur;
+	mq->mqrq_prev = mqrq_prev;
+	mq->queue->queuedata = mq;
+
+	blk_queue_prep_rq(mq->queue, mmc_prep_request);
+	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue);
+	queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, mq->queue);
+	if (mmc_can_erase(card))
+		mmc_queue_setup_discard(mq->queue, card);
+
+#ifdef CONFIG_MMC_BLOCK_BOUNCE
+	if (host->max_segs == 1) {
+		unsigned int bouncesz;
+
+		bouncesz = MMC_QUEUE_BOUNCESZ;
+
+		if (bouncesz > host->max_req_size)
+			bouncesz = host->max_req_size;
+		if (bouncesz > host->max_seg_size)
+			bouncesz = host->max_seg_size;
+		if (bouncesz > (host->max_blk_count * 512))
+			bouncesz = host->max_blk_count * 512;
+
+		if (bouncesz > 512) {
+			mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
+			if (!mqrq_cur->bounce_buf) {
+				pr_warn("%s: unable to allocate bounce cur buffer\n",
+					mmc_card_name(card));
+			}
+			mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
+			if (!mqrq_prev->bounce_buf) {
+				pr_warn("%s: unable to allocate bounce prev buffer\n",
+					mmc_card_name(card));
+				kfree(mqrq_cur->bounce_buf);
+				mqrq_cur->bounce_buf = NULL;
+			}
+		}
+
+		if (mqrq_cur->bounce_buf && mqrq_prev->bounce_buf) {
+			blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY);
+			blk_queue_max_hw_sectors(mq->queue, bouncesz / 512);
+			blk_queue_max_segments(mq->queue, bouncesz / 512);
+			blk_queue_max_segment_size(mq->queue, bouncesz);
+
+			mqrq_cur->sg = mmc_alloc_sg(1, &ret);
+			if (ret)
+				goto cleanup_queue;
+
+			mqrq_cur->bounce_sg =
+				mmc_alloc_sg(bouncesz / 512, &ret);
+			if (ret)
+				goto cleanup_queue;
+
+			mqrq_prev->sg = mmc_alloc_sg(1, &ret);
+			if (ret)
+				goto cleanup_queue;
+
+			mqrq_prev->bounce_sg =
+				mmc_alloc_sg(bouncesz / 512, &ret);
+			if (ret)
+				goto cleanup_queue;
+		}
+	}
+#endif
+
+	if (!mqrq_cur->bounce_buf && !mqrq_prev->bounce_buf) {
+		blk_queue_bounce_limit(mq->queue, limit);
+		blk_queue_max_hw_sectors(mq->queue,
+			min(host->max_blk_count, host->max_req_size / 512));
+		blk_queue_max_segments(mq->queue, host->max_segs);
+		blk_queue_max_segment_size(mq->queue, host->max_seg_size);
+
+		mqrq_cur->sg = mmc_alloc_sg(host->max_segs, &ret);
+		if (ret)
+			goto cleanup_queue;
+
+
+		mqrq_prev->sg = mmc_alloc_sg(host->max_segs, &ret);
+		if (ret)
+			goto cleanup_queue;
+	}
+
+	sema_init(&mq->thread_sem, 1);
+
+	mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d%s",
+		host->index, subname ? subname : "");
+
+	if (IS_ERR(mq->thread)) {
+		ret = PTR_ERR(mq->thread);
+		goto free_bounce_sg;
+	}
+
+	return 0;
+ free_bounce_sg:
+	kfree(mqrq_cur->bounce_sg);
+	mqrq_cur->bounce_sg = NULL;
+	kfree(mqrq_prev->bounce_sg);
+	mqrq_prev->bounce_sg = NULL;
+
+ cleanup_queue:
+	kfree(mqrq_cur->sg);
+	mqrq_cur->sg = NULL;
+	kfree(mqrq_cur->bounce_buf);
+	mqrq_cur->bounce_buf = NULL;
+
+	kfree(mqrq_prev->sg);
+	mqrq_prev->sg = NULL;
+	kfree(mqrq_prev->bounce_buf);
+	mqrq_prev->bounce_buf = NULL;
+
+	blk_cleanup_queue(mq->queue);
+	return ret;
+}
+
+void mmc_cleanup_queue(struct mmc_queue *mq)
+{
+	struct request_queue *q = mq->queue;
+	unsigned long flags;
+	struct mmc_queue_req *mqrq_cur = mq->mqrq_cur;
+	struct mmc_queue_req *mqrq_prev = mq->mqrq_prev;
+
+	/* Make sure the queue isn't suspended, as that will deadlock */
+	mmc_queue_resume(mq);
+
+	/* Then terminate our worker thread */
+	kthread_stop(mq->thread);
+
+	/* Empty the queue */
+	spin_lock_irqsave(q->queue_lock, flags);
+	q->queuedata = NULL;
+	blk_start_queue(q);
+	spin_unlock_irqrestore(q->queue_lock, flags);
+
+	kfree(mqrq_cur->bounce_sg);
+	mqrq_cur->bounce_sg = NULL;
+
+	kfree(mqrq_cur->sg);
+	mqrq_cur->sg = NULL;
+
+	kfree(mqrq_cur->bounce_buf);
+	mqrq_cur->bounce_buf = NULL;
+
+	kfree(mqrq_prev->bounce_sg);
+	mqrq_prev->bounce_sg = NULL;
+
+	kfree(mqrq_prev->sg);
+	mqrq_prev->sg = NULL;
+
+	kfree(mqrq_prev->bounce_buf);
+	mqrq_prev->bounce_buf = NULL;
+
+	mq->card = NULL;
+}
+EXPORT_SYMBOL(mmc_cleanup_queue);
+
+int mmc_packed_init(struct mmc_queue *mq, struct mmc_card *card)
+{
+	struct mmc_queue_req *mqrq_cur = &mq->mqrq[0];
+	struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];
+	int ret = 0;
+
+
+	mqrq_cur->packed = kzalloc(sizeof(struct mmc_packed), GFP_KERNEL);
+	if (!mqrq_cur->packed) {
+		pr_warn("%s: unable to allocate packed cmd for mqrq_cur\n",
+			mmc_card_name(card));
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	mqrq_prev->packed = kzalloc(sizeof(struct mmc_packed), GFP_KERNEL);
+	if (!mqrq_prev->packed) {
+		pr_warn("%s: unable to allocate packed cmd for mqrq_prev\n",
+			mmc_card_name(card));
+		kfree(mqrq_cur->packed);
+		mqrq_cur->packed = NULL;
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	INIT_LIST_HEAD(&mqrq_cur->packed->list);
+	INIT_LIST_HEAD(&mqrq_prev->packed->list);
+
+out:
+	return ret;
+}
+
+void mmc_packed_clean(struct mmc_queue *mq)
+{
+	struct mmc_queue_req *mqrq_cur = &mq->mqrq[0];
+	struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];
+
+	kfree(mqrq_cur->packed);
+	mqrq_cur->packed = NULL;
+	kfree(mqrq_prev->packed);
+	mqrq_prev->packed = NULL;
+}
+
+/**
+ * mmc_queue_suspend - suspend a MMC request queue
+ * @mq: MMC queue to suspend
+ *
+ * Stop the block request queue, and wait for our thread to
+ * complete any outstanding requests.  This ensures that we
+ * won't suspend while a request is being processed.
+ */
+int mmc_queue_suspend(struct mmc_queue *mq, int wait)
+{
+	struct request_queue *q = mq->queue;
+	struct request *req;
+	unsigned long flags;
+	int rc = 0;
+
+	if (!(mq->flags & MMC_QUEUE_SUSPENDED)) {
+		mq->flags |= MMC_QUEUE_SUSPENDED;
+
+		spin_lock_irqsave(q->queue_lock, flags);
+		blk_stop_queue(q);
+		spin_unlock_irqrestore(q->queue_lock, flags);
+		rc = down_trylock(&mq->thread_sem);
+		if (rc && !wait) {
+			mq->flags &= ~MMC_QUEUE_SUSPENDED;
+			spin_lock_irqsave(q->queue_lock, flags);
+			blk_start_queue(q);
+			spin_unlock_irqrestore(q->queue_lock, flags);
+			rc = -EBUSY;
+		} else if (wait) {
+			printk("%s: mq->flags: %x, q->queue_flags: 0x%lx, \
+					q->in_flight (%d, %d) \n",
+					mmc_hostname(mq->card->host), mq->flags,
+					q->queue_flags, q->in_flight[0], q->in_flight[1]);
+			mutex_lock(&q->sysfs_lock);
+			if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)) {
+				queue_flag_set_unlocked(QUEUE_FLAG_DYING, q);
+				spin_lock_irqsave(q->queue_lock, flags);
+				queue_flag_set(QUEUE_FLAG_DYING, q);
+			} else if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 8, 0)) {
+				queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q);
+				spin_lock_irqsave(q->queue_lock, flags);
+				queue_flag_set(QUEUE_FLAG_DEAD, q);
+			}
+
+			while ((req = blk_fetch_request(q)) != NULL) {
+				req->cmd_flags |= REQ_QUIET;
+				__blk_end_request_all(req, -EIO);
+			}
+
+			spin_unlock_irqrestore(q->queue_lock, flags);
+			mutex_unlock(&q->sysfs_lock);
+			if (rc) {
+				down(&mq->thread_sem);
+				rc = 0;
+			}
+		}
+
+	}
+	return rc;
+}
+
+/**
+ * mmc_queue_resume - resume a previously suspended MMC request queue
+ * @mq: MMC queue to resume
+ */
+void mmc_queue_resume(struct mmc_queue *mq)
+{
+	struct request_queue *q = mq->queue;
+	unsigned long flags;
+
+	if (mq->flags & MMC_QUEUE_SUSPENDED) {
+		mq->flags &= ~MMC_QUEUE_SUSPENDED;
+
+		up(&mq->thread_sem);
+
+		spin_lock_irqsave(q->queue_lock, flags);
+		blk_start_queue(q);
+		spin_unlock_irqrestore(q->queue_lock, flags);
+	}
+}
+
+static unsigned int mmc_queue_packed_map_sg(struct mmc_queue *mq,
+					    struct mmc_packed *packed,
+					    struct scatterlist *sg,
+					    enum mmc_packed_type cmd_type)
+{
+	struct scatterlist *__sg = sg;
+	unsigned int sg_len = 0;
+	struct request *req;
+
+	if (mmc_packed_wr(cmd_type)) {
+		unsigned int hdr_sz = mmc_large_sector(mq->card) ? 4096 : 512;
+		unsigned int max_seg_sz = queue_max_segment_size(mq->queue);
+		unsigned int len, remain, offset = 0;
+		u8 *buf = (u8 *)packed->cmd_hdr;
+
+		remain = hdr_sz;
+		do {
+			len = min(remain, max_seg_sz);
+			sg_set_buf(__sg, buf + offset, len);
+			offset += len;
+			remain -= len;
+			(__sg++)->page_link &= ~0x02;
+			sg_len++;
+		} while (remain);
+	}
+
+	list_for_each_entry(req, &packed->list, queuelist) {
+		sg_len += blk_rq_map_sg(mq->queue, req, __sg);
+		__sg = sg + (sg_len - 1);
+		(__sg++)->page_link &= ~0x02;
+	}
+	sg_mark_end(sg + (sg_len - 1));
+	return sg_len;
+}
+
+/*
+ * Prepare the sg list(s) to be handed of to the host driver
+ */
+unsigned int mmc_queue_map_sg(struct mmc_queue *mq, struct mmc_queue_req *mqrq)
+{
+	unsigned int sg_len;
+	size_t buflen;
+	struct scatterlist *sg;
+	enum mmc_packed_type cmd_type;
+	int i;
+
+	cmd_type = mqrq->cmd_type;
+
+	if (!mqrq->bounce_buf) {
+		if (mmc_packed_cmd(cmd_type))
+			return mmc_queue_packed_map_sg(mq, mqrq->packed,
+						       mqrq->sg, cmd_type);
+		else
+			return blk_rq_map_sg(mq->queue, mqrq->req, mqrq->sg);
+	}
+
+	BUG_ON(!mqrq->bounce_sg);
+
+	if (mmc_packed_cmd(cmd_type))
+		sg_len = mmc_queue_packed_map_sg(mq, mqrq->packed,
+						 mqrq->bounce_sg, cmd_type);
+	else
+		sg_len = blk_rq_map_sg(mq->queue, mqrq->req, mqrq->bounce_sg);
+
+	mqrq->bounce_sg_len = sg_len;
+
+	buflen = 0;
+	for_each_sg(mqrq->bounce_sg, sg, sg_len, i)
+		buflen += sg->length;
+
+	sg_init_one(mqrq->sg, mqrq->bounce_buf, buflen);
+
+	return 1;
+}
+
+/*
+ * If writing, bounce the data to the buffer before the request
+ * is sent to the host driver
+ */
+void mmc_queue_bounce_pre(struct mmc_queue_req *mqrq)
+{
+	if (!mqrq->bounce_buf)
+		return;
+
+	if (rq_data_dir(mqrq->req) != WRITE)
+		return;
+
+	sg_copy_to_buffer(mqrq->bounce_sg, mqrq->bounce_sg_len,
+		mqrq->bounce_buf, mqrq->sg[0].length);
+}
+
+/*
+ * If reading, bounce the data from the buffer after the request
+ * has been handled by the host driver
+ */
+void mmc_queue_bounce_post(struct mmc_queue_req *mqrq)
+{
+	if (!mqrq->bounce_buf)
+		return;
+
+	if (rq_data_dir(mqrq->req) != READ)
+		return;
+
+	sg_copy_from_buffer(mqrq->bounce_sg, mqrq->bounce_sg_len,
+		mqrq->bounce_buf, mqrq->sg[0].length);
+}

drivers/mmc/card/queue.h

@@ -0,0 +1,76 @@
+#ifndef MMC_QUEUE_H
+#define MMC_QUEUE_H
+
+#define MMC_REQ_SPECIAL_MASK	(REQ_DISCARD | REQ_FLUSH)
+
+struct request;
+struct task_struct;
+
+struct mmc_blk_request {
+	struct mmc_request	mrq;
+	struct mmc_command	sbc;
+	struct mmc_command	cmd;
+	struct mmc_command	stop;
+	struct mmc_data		data;
+};
+
+enum mmc_packed_type {
+	MMC_PACKED_NONE = 0,
+	MMC_PACKED_WRITE,
+};
+
+#define mmc_packed_cmd(type)	((type) != MMC_PACKED_NONE)
+#define mmc_packed_wr(type)	((type) == MMC_PACKED_WRITE)
+
+struct mmc_packed {
+	struct list_head	list;
+	u32			cmd_hdr[1024];
+	unsigned int		blocks;
+	u8			nr_entries;
+	u8			retries;
+	s16			idx_failure;
+};
+
+struct mmc_queue_req {
+	struct request		*req;
+	struct mmc_blk_request	brq;
+	struct scatterlist	*sg;
+	char			*bounce_buf;
+	struct scatterlist	*bounce_sg;
+	unsigned int		bounce_sg_len;
+	struct mmc_async_req	mmc_active;
+	enum mmc_packed_type	cmd_type;
+	struct mmc_packed	*packed;
+};
+
+struct mmc_queue {
+	struct mmc_card		*card;
+	struct task_struct	*thread;
+	struct semaphore	thread_sem;
+	unsigned int		flags;
+#define MMC_QUEUE_SUSPENDED	(1 << 0)
+#define MMC_QUEUE_NEW_REQUEST	(1 << 1)
+
+	int			(*issue_fn)(struct mmc_queue *, struct request *);
+	void			*data;
+	struct request_queue	*queue;
+	struct mmc_queue_req	mqrq[2];
+	struct mmc_queue_req	*mqrq_cur;
+	struct mmc_queue_req	*mqrq_prev;
+};
+
+extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *,
+			  const char *);
+extern void mmc_cleanup_queue(struct mmc_queue *);
+extern int mmc_queue_suspend(struct mmc_queue *, int wait);
+extern void mmc_queue_resume(struct mmc_queue *);
+
+extern unsigned int mmc_queue_map_sg(struct mmc_queue *,
+				     struct mmc_queue_req *);
+extern void mmc_queue_bounce_pre(struct mmc_queue_req *);
+extern void mmc_queue_bounce_post(struct mmc_queue_req *);
+
+extern int mmc_packed_init(struct mmc_queue *, struct mmc_card *);
+extern void mmc_packed_clean(struct mmc_queue *);
+
+#endif

drivers/mmc/core/Kconfig

@@ -0,0 +1,28 @@
+#
+# MMC core configuration
+#
+
+config MMC_CLKGATE
+	bool "MMC host clock gating"
+	help
+	  This will attempt to aggressively gate the clock to the MMC card.
+	  This is done to save power due to gating off the logic and bus
+	  noise when the MMC card is not in use. Your host driver has to
+	  support handling this in order for it to be of any use.
+
+	  If unsure, say N.
+
+config MMC_EMBEDDED_SDIO
+	boolean "MMC embedded SDIO device support (EXPERIMENTAL)"
+	help
+	  If you say Y here, support will be added for embedded SDIO
+	  devices which do not contain the necessary enumeration
+	  support in hardware to be properly detected.
+
+config MMC_PARANOID_SD_INIT
+	bool "Enable paranoid SD card initialization (EXPERIMENTAL)"
+	help
+	  If you say Y here, the MMC layer will be extra paranoid
+	  about re-trying SD init requests. This can be a useful
+	  work-around for buggy controllers and hardware. Enable
+	  if you are experiencing issues with SD detection.

drivers/mmc/core/Makefile

@@ -0,0 +1,12 @@
+#
+# Makefile for the kernel mmc core.
+#
+
+obj-$(CONFIG_MMC)		+= mmc_core.o
+mmc_core-y			:= core.o bus.o host.o \
+				   mmc.o mmc_ops.o sd.o sd_ops.o \
+				   sdio.o sdio_ops.o sdio_bus.o \
+				   sdio_cis.o sdio_io.o sdio_irq.o \
+				   quirks.o slot-gpio.o
+
+mmc_core-$(CONFIG_DEBUG_FS)	+= debugfs.o

drivers/mmc/core/bus.c

@@ -0,0 +1,394 @@
+/*
+ *  linux/drivers/mmc/core/bus.c
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *  Copyright (C) 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  MMC card bus driver model
+ */
+
+#include <linux/export.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include "core.h"
+#include "sdio_cis.h"
+#include "bus.h"
+
+#define to_mmc_driver(d)	container_of(d, struct mmc_driver, drv)
+
+static ssize_t type_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct mmc_card *card = mmc_dev_to_card(dev);
+
+	switch (card->type) {
+	case MMC_TYPE_MMC:
+		return sprintf(buf, "MMC\n");
+	case MMC_TYPE_SD:
+		return sprintf(buf, "SD\n");
+	case MMC_TYPE_SDIO:
+		return sprintf(buf, "SDIO\n");
+	case MMC_TYPE_SD_COMBO:
+		return sprintf(buf, "SDcombo\n");
+	default:
+		return -EFAULT;
+	}
+}
+static DEVICE_ATTR_RO(type);
+
+static struct attribute *mmc_dev_attrs[] = {
+	&dev_attr_type.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(mmc_dev);
+
+/*
+ * This currently matches any MMC driver to any MMC card - drivers
+ * themselves make the decision whether to drive this card in their
+ * probe method.
+ */
+static int mmc_bus_match(struct device *dev, struct device_driver *drv)
+{
+	return 1;
+}
+
+static int
+mmc_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct mmc_card *card = mmc_dev_to_card(dev);
+	const char *type;
+	int retval = 0;
+
+	switch (card->type) {
+	case MMC_TYPE_MMC:
+		type = "MMC";
+		break;
+	case MMC_TYPE_SD:
+		type = "SD";
+		break;
+	case MMC_TYPE_SDIO:
+		type = "SDIO";
+		break;
+	case MMC_TYPE_SD_COMBO:
+		type = "SDcombo";
+		break;
+	default:
+		type = NULL;
+	}
+
+	if (type) {
+		retval = add_uevent_var(env, "MMC_TYPE=%s", type);
+		if (retval)
+			return retval;
+	}
+
+	retval = add_uevent_var(env, "MMC_NAME=%s", mmc_card_name(card));
+	if (retval)
+		return retval;
+
+	/*
+	 * Request the mmc_block device.  Note: that this is a direct request
+	 * for the module it carries no information as to what is inserted.
+	 */
+	retval = add_uevent_var(env, "MODALIAS=mmc:block");
+
+	return retval;
+}
+
+static int mmc_bus_probe(struct device *dev)
+{
+	struct mmc_driver *drv = to_mmc_driver(dev->driver);
+	struct mmc_card *card = mmc_dev_to_card(dev);
+
+	return drv->probe(card);
+}
+
+static int mmc_bus_remove(struct device *dev)
+{
+	struct mmc_driver *drv = to_mmc_driver(dev->driver);
+	struct mmc_card *card = mmc_dev_to_card(dev);
+
+	drv->remove(card);
+
+	return 0;
+}
+
+static void mmc_bus_shutdown(struct device *dev)
+{
+	struct mmc_driver *drv = to_mmc_driver(dev->driver);
+	struct mmc_card *card = mmc_dev_to_card(dev);
+	struct mmc_host *host = card->host;
+	int ret;
+
+	if (dev->driver && drv->shutdown)
+		drv->shutdown(card);
+
+	if (host->bus_ops->shutdown) {
+		ret = host->bus_ops->shutdown(host);
+		if (ret)
+			pr_warn("%s: error %d during shutdown\n",
+				mmc_hostname(host), ret);
+	}
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mmc_bus_suspend(struct device *dev)
+{
+	struct mmc_driver *drv = to_mmc_driver(dev->driver);
+	struct mmc_card *card = mmc_dev_to_card(dev);
+	struct mmc_host *host = card->host;
+	int ret;
+
+	if (dev->driver && drv->suspend) {
+		ret = drv->suspend(card);
+		if (ret)
+			return ret;
+	}
+
+    if (mmc_bus_needs_resume(host))
+		return 0;
+
+	ret = host->bus_ops->suspend(host);
+	return ret;
+}
+
+static int mmc_bus_resume(struct device *dev)
+{
+	struct mmc_driver *drv = to_mmc_driver(dev->driver);
+	struct mmc_card *card = mmc_dev_to_card(dev);
+	struct mmc_host *host = card->host;
+	int ret = 0;
+
+	if (mmc_bus_manual_resume(host) ) {
+		host->bus_resume_flags |= MMC_BUSRESUME_NEEDS_RESUME;
+	} else {
+		ret = host->bus_ops->resume(host);
+		if (ret)
+			pr_warn("%s: error %d during resume (card was removed?)\n",
+				mmc_hostname(host), ret);
+	}
+
+	if (dev->driver && drv->resume)
+		ret = drv->resume(card);
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+static int mmc_runtime_suspend(struct device *dev)
+{
+	struct mmc_card *card = mmc_dev_to_card(dev);
+	struct mmc_host *host = card->host;
+
+	return host->bus_ops->runtime_suspend(host);
+}
+
+static int mmc_runtime_resume(struct device *dev)
+{
+	struct mmc_card *card = mmc_dev_to_card(dev);
+	struct mmc_host *host = card->host;
+
+	return host->bus_ops->runtime_resume(host);
+}
+#endif /* !CONFIG_PM_RUNTIME */
+
+static const struct dev_pm_ops mmc_bus_pm_ops = {
+	SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume)
+};
+
+static struct bus_type mmc_bus_type = {
+	.name		= "mmc",
+	.dev_groups	= mmc_dev_groups,
+	.match		= mmc_bus_match,
+	.uevent		= mmc_bus_uevent,
+	.probe		= mmc_bus_probe,
+	.remove		= mmc_bus_remove,
+	.shutdown	= mmc_bus_shutdown,
+	.pm		= &mmc_bus_pm_ops,
+};
+
+int mmc_register_bus(void)
+{
+	return bus_register(&mmc_bus_type);
+}
+
+void mmc_unregister_bus(void)
+{
+	bus_unregister(&mmc_bus_type);
+}
+
+/**
+ *	mmc_register_driver - register a media driver
+ *	@drv: MMC media driver
+ */
+int mmc_register_driver(struct mmc_driver *drv)
+{
+	drv->drv.bus = &mmc_bus_type;
+	return driver_register(&drv->drv);
+}
+
+EXPORT_SYMBOL(mmc_register_driver);
+
+/**
+ *	mmc_unregister_driver - unregister a media driver
+ *	@drv: MMC media driver
+ */
+void mmc_unregister_driver(struct mmc_driver *drv)
+{
+	drv->drv.bus = &mmc_bus_type;
+	driver_unregister(&drv->drv);
+}
+
+EXPORT_SYMBOL(mmc_unregister_driver);
+
+static void mmc_release_card(struct device *dev)
+{
+	struct mmc_card *card = mmc_dev_to_card(dev);
+
+	sdio_free_common_cis(card);
+
+	kfree(card->info);
+
+	kfree(card);
+}
+
+/*
+ * Allocate and initialise a new MMC card structure.
+ */
+struct mmc_card *mmc_alloc_card(struct mmc_host *host, struct device_type *type)
+{
+	struct mmc_card *card;
+
+	card = kzalloc(sizeof(struct mmc_card), GFP_KERNEL);
+	if (!card)
+		return ERR_PTR(-ENOMEM);
+
+	card->host = host;
+
+	device_initialize(&card->dev);
+
+	card->dev.parent = mmc_classdev(host);
+	card->dev.bus = &mmc_bus_type;
+	card->dev.release = mmc_release_card;
+	card->dev.type = type;
+
+	return card;
+}
+
+/*
+ * Register a new MMC card with the driver model.
+ */
+int mmc_add_card(struct mmc_card *card)
+{
+	int ret;
+	const char *type;
+	const char *uhs_bus_speed_mode = "";
+	static const char *const uhs_speeds[] = {
+		[UHS_SDR12_BUS_SPEED] = "SDR12 ",
+		[UHS_SDR25_BUS_SPEED] = "SDR25 ",
+		[UHS_SDR50_BUS_SPEED] = "SDR50 ",
+		[UHS_SDR104_BUS_SPEED] = "SDR104 ",
+		[UHS_DDR50_BUS_SPEED] = "DDR50 ",
+	};
+
+
+	dev_set_name(&card->dev, "%s:%04x", mmc_hostname(card->host), card->rca);
+
+	switch (card->type) {
+	case MMC_TYPE_MMC:
+		type = "MMC";
+		break;
+	case MMC_TYPE_SD:
+		type = "SD";
+		if (mmc_card_blockaddr(card)) {
+			if (mmc_card_ext_capacity(card))
+				type = "SDXC";
+			else
+				type = "SDHC";
+		}
+		break;
+	case MMC_TYPE_SDIO:
+		type = "SDIO";
+		break;
+	case MMC_TYPE_SD_COMBO:
+		type = "SD-combo";
+		if (mmc_card_blockaddr(card))
+			type = "SDHC-combo";
+		break;
+	default:
+		type = "?";
+		break;
+	}
+
+	if (mmc_card_uhs(card) &&
+		(card->sd_bus_speed < ARRAY_SIZE(uhs_speeds)))
+		uhs_bus_speed_mode = uhs_speeds[card->sd_bus_speed];
+
+	if (mmc_host_is_spi(card->host)) {
+		pr_info("%s: new %s%s%s card on SPI\n",
+			mmc_hostname(card->host),
+			mmc_card_hs(card) ? "high speed " : "",
+			mmc_card_ddr52(card) ? "DDR " : "",
+			type);
+	} else {
+		pr_info("%s: new %s%s%s%s%s card at address %04x\n",
+			mmc_hostname(card->host),
+			mmc_card_uhs(card) ? "ultra high speed " :
+			(mmc_card_hs(card) ? "high speed " : ""),
+			mmc_card_hs400(card) ? "HS400 " :
+			(mmc_card_hs200(card) ? "HS200 " : ""),
+			mmc_card_ddr52(card) ? "DDR " : "",
+			uhs_bus_speed_mode, type, card->rca);
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	mmc_add_card_debugfs(card);
+#endif
+	mmc_init_context_info(card->host);
+
+	ret = device_add(&card->dev);
+	if (ret)
+		return ret;
+
+	mmc_card_set_present(card);
+
+	return 0;
+}
+
+/*
+ * Unregister a new MMC card with the driver model, and
+ * (eventually) free it.
+ */
+void mmc_remove_card(struct mmc_card *card)
+{
+#ifdef CONFIG_DEBUG_FS
+	mmc_remove_card_debugfs(card);
+#endif
+
+	if (mmc_card_present(card)) {
+		if (mmc_host_is_spi(card->host)) {
+			pr_info("%s: SPI card removed\n",
+				mmc_hostname(card->host));
+		} else {
+			pr_info("%s: card %04x removed\n",
+				mmc_hostname(card->host), card->rca);
+		}
+		device_del(&card->dev);
+	}
+
+	put_device(&card->dev);
+}
+

drivers/mmc/core/bus.h

@@ -0,0 +1,31 @@
+/*
+ *  linux/drivers/mmc/core/bus.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *  Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _MMC_CORE_BUS_H
+#define _MMC_CORE_BUS_H
+
+#define MMC_DEV_ATTR(name, fmt, args...)					\
+static ssize_t mmc_##name##_show (struct device *dev, struct device_attribute *attr, char *buf)	\
+{										\
+	struct mmc_card *card = mmc_dev_to_card(dev);				\
+	return sprintf(buf, fmt, args);						\
+}										\
+static DEVICE_ATTR(name, S_IRUGO, mmc_##name##_show, NULL)
+
+struct mmc_card *mmc_alloc_card(struct mmc_host *host,
+	struct device_type *type);
+int mmc_add_card(struct mmc_card *card);
+void mmc_remove_card(struct mmc_card *card);
+
+int mmc_register_bus(void);
+void mmc_unregister_bus(void);
+
+#endif
+

drivers/mmc/core/core.h

@@ -0,0 +1,85 @@
+/*
+ *  linux/drivers/mmc/core/core.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *  Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _MMC_CORE_CORE_H
+#define _MMC_CORE_CORE_H
+
+#include <linux/delay.h>
+
+#define MMC_CMD_RETRIES        3
+
+struct mmc_bus_ops {
+	void (*remove)(struct mmc_host *);
+	void (*detect)(struct mmc_host *);
+	int (*pre_suspend)(struct mmc_host *);
+	int (*suspend)(struct mmc_host *);
+	int (*resume)(struct mmc_host *);
+	int (*runtime_suspend)(struct mmc_host *);
+	int (*runtime_resume)(struct mmc_host *);
+	int (*power_save)(struct mmc_host *);
+	int (*power_restore)(struct mmc_host *);
+	int (*alive)(struct mmc_host *);
+	int (*shutdown)(struct mmc_host *);
+};
+
+void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops);
+void mmc_detach_bus(struct mmc_host *host);
+
+void mmc_init_erase(struct mmc_card *card);
+
+void mmc_set_chip_select(struct mmc_host *host, int mode);
+void mmc_set_clock(struct mmc_host *host, unsigned int hz);
+void mmc_gate_clock(struct mmc_host *host);
+void mmc_ungate_clock(struct mmc_host *host);
+void mmc_set_ungated(struct mmc_host *host);
+void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode);
+void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
+u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr);
+int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
+void mmc_set_timing(struct mmc_host *host, unsigned int timing);
+void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
+void mmc_power_up(struct mmc_host *host, u32 ocr);
+void mmc_power_off(struct mmc_host *host);
+void mmc_power_cycle(struct mmc_host *host, u32 ocr);
+
+static inline void mmc_delay(unsigned int ms)
+{
+	if (ms < 1000 / HZ) {
+		cond_resched();
+		mdelay(ms);
+	} else {
+		msleep(ms);
+	}
+}
+
+void mmc_rescan(struct work_struct *work);
+void mmc_start_host(struct mmc_host *host);
+void mmc_stop_host(struct mmc_host *host);
+
+int _mmc_detect_card_removed(struct mmc_host *host);
+
+int mmc_attach_mmc(struct mmc_host *host);
+int mmc_attach_sd(struct mmc_host *host);
+int mmc_attach_sdio(struct mmc_host *host);
+
+/* Module parameters */
+extern bool use_spi_crc;
+
+/* Debugfs information for hosts and cards */
+void mmc_add_host_debugfs(struct mmc_host *host);
+void mmc_remove_host_debugfs(struct mmc_host *host);
+
+void mmc_add_card_debugfs(struct mmc_card *card);
+void mmc_remove_card_debugfs(struct mmc_card *card);
+
+void mmc_init_context_info(struct mmc_host *host);
+#endif
+

drivers/mmc/core/debugfs.c

@@ -0,0 +1,386 @@
+/*
+ * Debugfs support for hosts and cards
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/moduleparam.h>
+#include <linux/export.h>
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/fault-inject.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include "core.h"
+#include "mmc_ops.h"
+
+#ifdef CONFIG_FAIL_MMC_REQUEST
+
+static DECLARE_FAULT_ATTR(fail_default_attr);
+static char *fail_request;
+module_param(fail_request, charp, 0);
+
+#endif /* CONFIG_FAIL_MMC_REQUEST */
+
+/* The debugfs functions are optimized away when CONFIG_DEBUG_FS isn't set. */
+static int mmc_ios_show(struct seq_file *s, void *data)
+{
+	static const char *vdd_str[] = {
+		[8]	= "2.0",
+		[9]	= "2.1",
+		[10]	= "2.2",
+		[11]	= "2.3",
+		[12]	= "2.4",
+		[13]	= "2.5",
+		[14]	= "2.6",
+		[15]	= "2.7",
+		[16]	= "2.8",
+		[17]	= "2.9",
+		[18]	= "3.0",
+		[19]	= "3.1",
+		[20]	= "3.2",
+		[21]	= "3.3",
+		[22]	= "3.4",
+		[23]	= "3.5",
+		[24]	= "3.6",
+	};
+	struct mmc_host	*host = s->private;
+	struct mmc_ios	*ios = &host->ios;
+	const char *str;
+
+	seq_printf(s, "clock:\t\t%u Hz\n", ios->clock);
+	if (host->actual_clock)
+		seq_printf(s, "actual clock:\t%u Hz\n", host->actual_clock);
+	seq_printf(s, "vdd:\t\t%u ", ios->vdd);
+	if ((1 << ios->vdd) & MMC_VDD_165_195)
+		seq_printf(s, "(1.65 - 1.95 V)\n");
+	else if (ios->vdd < (ARRAY_SIZE(vdd_str) - 1)
+			&& vdd_str[ios->vdd] && vdd_str[ios->vdd + 1])
+		seq_printf(s, "(%s ~ %s V)\n", vdd_str[ios->vdd],
+				vdd_str[ios->vdd + 1]);
+	else
+		seq_printf(s, "(invalid)\n");
+
+	switch (ios->bus_mode) {
+	case MMC_BUSMODE_OPENDRAIN:
+		str = "open drain";
+		break;
+	case MMC_BUSMODE_PUSHPULL:
+		str = "push-pull";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "bus mode:\t%u (%s)\n", ios->bus_mode, str);
+
+	switch (ios->chip_select) {
+	case MMC_CS_DONTCARE:
+		str = "don't care";
+		break;
+	case MMC_CS_HIGH:
+		str = "active high";
+		break;
+	case MMC_CS_LOW:
+		str = "active low";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "chip select:\t%u (%s)\n", ios->chip_select, str);
+
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		str = "off";
+		break;
+	case MMC_POWER_UP:
+		str = "up";
+		break;
+	case MMC_POWER_ON:
+		str = "on";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "power mode:\t%u (%s)\n", ios->power_mode, str);
+	seq_printf(s, "bus width:\t%u (%u bits)\n",
+			ios->bus_width, 1 << ios->bus_width);
+
+	switch (ios->timing) {
+	case MMC_TIMING_LEGACY:
+		str = "legacy";
+		break;
+	case MMC_TIMING_MMC_HS:
+		str = "mmc high-speed";
+		break;
+	case MMC_TIMING_SD_HS:
+		str = "sd high-speed";
+		break;
+	case MMC_TIMING_UHS_SDR50:
+		str = "sd uhs SDR50";
+		break;
+	case MMC_TIMING_UHS_SDR104:
+		str = "sd uhs SDR104";
+		break;
+	case MMC_TIMING_UHS_DDR50:
+		str = "sd uhs DDR50";
+		break;
+	case MMC_TIMING_MMC_DDR52:
+		str = "mmc DDR52";
+		break;
+	case MMC_TIMING_MMC_HS200:
+		str = "mmc HS200";
+		break;
+	case MMC_TIMING_MMC_HS400:
+		str = "mmc HS400";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "timing spec:\t%u (%s)\n", ios->timing, str);
+
+	switch (ios->signal_voltage) {
+	case MMC_SIGNAL_VOLTAGE_330:
+		str = "3.30 V";
+		break;
+	case MMC_SIGNAL_VOLTAGE_180:
+		str = "1.80 V";
+		break;
+	case MMC_SIGNAL_VOLTAGE_120:
+		str = "1.20 V";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "signal voltage:\t%u (%s)\n", ios->chip_select, str);
+
+	return 0;
+}
+
+static int mmc_ios_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mmc_ios_show, inode->i_private);
+}
+
+static const struct file_operations mmc_ios_fops = {
+	.open		= mmc_ios_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int mmc_clock_opt_get(void *data, u64 *val)
+{
+	struct mmc_host *host = data;
+
+	*val = host->ios.clock;
+
+	return 0;
+}
+
+static int mmc_clock_opt_set(void *data, u64 val)
+{
+	struct mmc_host *host = data;
+
+	/* We need this check due to input value is u64 */
+	if (val > host->f_max)
+		return -EINVAL;
+
+	mmc_claim_host(host);
+	mmc_set_clock(host, (unsigned int) val);
+	mmc_release_host(host);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(mmc_clock_fops, mmc_clock_opt_get, mmc_clock_opt_set,
+	"%llu\n");
+
+void mmc_add_host_debugfs(struct mmc_host *host)
+{
+	struct dentry *root;
+
+	root = debugfs_create_dir(mmc_hostname(host), NULL);
+	if (IS_ERR(root))
+		/* Don't complain -- debugfs just isn't enabled */
+		return;
+	if (!root)
+		/* Complain -- debugfs is enabled, but it failed to
+		 * create the directory. */
+		goto err_root;
+
+	host->debugfs_root = root;
+
+	if (!debugfs_create_file("ios", S_IRUSR, root, host, &mmc_ios_fops))
+		goto err_node;
+
+	if (!debugfs_create_file("clock", S_IRUSR | S_IWUSR, root, host,
+			&mmc_clock_fops))
+		goto err_node;
+
+#ifdef CONFIG_MMC_CLKGATE
+	if (!debugfs_create_u32("clk_delay", (S_IRUSR | S_IWUSR),
+				root, &host->clk_delay))
+		goto err_node;
+#endif
+#ifdef CONFIG_FAIL_MMC_REQUEST
+	if (fail_request)
+		setup_fault_attr(&fail_default_attr, fail_request);
+	host->fail_mmc_request = fail_default_attr;
+	if (IS_ERR(fault_create_debugfs_attr("fail_mmc_request",
+					     root,
+					     &host->fail_mmc_request)))
+		goto err_node;
+#endif
+	return;
+
+err_node:
+	debugfs_remove_recursive(root);
+	host->debugfs_root = NULL;
+err_root:
+	dev_err(&host->class_dev, "failed to initialize debugfs\n");
+}
+
+void mmc_remove_host_debugfs(struct mmc_host *host)
+{
+	debugfs_remove_recursive(host->debugfs_root);
+}
+
+static int mmc_dbg_card_status_get(void *data, u64 *val)
+{
+	struct mmc_card	*card = data;
+	u32		status;
+	int		ret;
+
+	mmc_get_card(card);
+
+	ret = mmc_send_status(data, &status);
+	if (!ret)
+		*val = status;
+
+	mmc_put_card(card);
+
+	return ret;
+}
+DEFINE_SIMPLE_ATTRIBUTE(mmc_dbg_card_status_fops, mmc_dbg_card_status_get,
+		NULL, "%08llx\n");
+
+#define EXT_CSD_STR_LEN 1025
+
+static int mmc_ext_csd_open(struct inode *inode, struct file *filp)
+{
+	struct mmc_card *card = inode->i_private;
+	char *buf;
+	ssize_t n = 0;
+	u8 *ext_csd;
+	int err, i;
+
+	buf = kmalloc(EXT_CSD_STR_LEN + 1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ext_csd = kmalloc(512, GFP_KERNEL);
+	if (!ext_csd) {
+		err = -ENOMEM;
+		goto out_free;
+	}
+
+	mmc_get_card(card);
+	err = mmc_send_ext_csd(card, ext_csd);
+	mmc_put_card(card);
+	if (err)
+		goto out_free;
+
+	for (i = 0; i < 512; i++)
+		n += sprintf(buf + n, "%02x", ext_csd[i]);
+	n += sprintf(buf + n, "\n");
+	BUG_ON(n != EXT_CSD_STR_LEN);
+
+	filp->private_data = buf;
+	kfree(ext_csd);
+	return 0;
+
+out_free:
+	kfree(buf);
+	kfree(ext_csd);
+	return err;
+}
+
+static ssize_t mmc_ext_csd_read(struct file *filp, char __user *ubuf,
+				size_t cnt, loff_t *ppos)
+{
+	char *buf = filp->private_data;
+
+	return simple_read_from_buffer(ubuf, cnt, ppos,
+				       buf, EXT_CSD_STR_LEN);
+}
+
+static int mmc_ext_csd_release(struct inode *inode, struct file *file)
+{
+	kfree(file->private_data);
+	return 0;
+}
+
+static const struct file_operations mmc_dbg_ext_csd_fops = {
+	.open		= mmc_ext_csd_open,
+	.read		= mmc_ext_csd_read,
+	.release	= mmc_ext_csd_release,
+	.llseek		= default_llseek,
+};
+
+void mmc_add_card_debugfs(struct mmc_card *card)
+{
+	struct mmc_host	*host = card->host;
+	struct dentry	*root;
+
+	if (!host->debugfs_root)
+		return;
+
+	root = debugfs_create_dir(mmc_card_id(card), host->debugfs_root);
+	if (IS_ERR(root))
+		/* Don't complain -- debugfs just isn't enabled */
+		return;
+	if (!root)
+		/* Complain -- debugfs is enabled, but it failed to
+		 * create the directory. */
+		goto err;
+
+	card->debugfs_root = root;
+
+	if (!debugfs_create_x32("state", S_IRUSR, root, &card->state))
+		goto err;
+
+	if (mmc_card_mmc(card) || mmc_card_sd(card))
+		if (!debugfs_create_file("status", S_IRUSR, root, card,
+					&mmc_dbg_card_status_fops))
+			goto err;
+
+	if (mmc_card_mmc(card))
+		if (!debugfs_create_file("ext_csd", S_IRUSR, root, card,
+					&mmc_dbg_ext_csd_fops))
+			goto err;
+
+	return;
+
+err:
+	debugfs_remove_recursive(root);
+	card->debugfs_root = NULL;
+	dev_err(&card->dev, "failed to initialize debugfs\n");
+}
+
+void mmc_remove_card_debugfs(struct mmc_card *card)
+{
+	debugfs_remove_recursive(card->debugfs_root);
+}

drivers/mmc/core/host.c

@@ -0,0 +1,628 @@
+/*
+ *  linux/drivers/mmc/core/host.c
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *  Copyright (C) 2007-2008 Pierre Ossman
+ *  Copyright (C) 2010 Linus Walleij
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  MMC host class device management
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/idr.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/pagemap.h>
+#include <linux/export.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/slot-gpio.h>
+
+#include "core.h"
+#include "host.h"
+
+#define cls_dev_to_mmc_host(d)	container_of(d, struct mmc_host, class_dev)
+
+static void mmc_host_classdev_release(struct device *dev)
+{
+	struct mmc_host *host = cls_dev_to_mmc_host(dev);
+	mutex_destroy(&host->slot.lock);
+	kfree(host);
+}
+
+static struct class mmc_host_class = {
+	.name		= "mmc_host",
+	.dev_release	= mmc_host_classdev_release,
+};
+
+int mmc_register_host_class(void)
+{
+	return class_register(&mmc_host_class);
+}
+
+void mmc_unregister_host_class(void)
+{
+	class_unregister(&mmc_host_class);
+}
+
+static DEFINE_IDR(mmc_host_idr);
+static DEFINE_SPINLOCK(mmc_host_lock);
+
+#ifdef CONFIG_MMC_CLKGATE
+static ssize_t clkgate_delay_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mmc_host *host = cls_dev_to_mmc_host(dev);
+	return snprintf(buf, PAGE_SIZE, "%lu\n", host->clkgate_delay);
+}
+
+static ssize_t clkgate_delay_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct mmc_host *host = cls_dev_to_mmc_host(dev);
+	unsigned long flags, value;
+
+	if (kstrtoul(buf, 0, &value))
+		return -EINVAL;
+
+	spin_lock_irqsave(&host->clk_lock, flags);
+	host->clkgate_delay = value;
+	spin_unlock_irqrestore(&host->clk_lock, flags);
+	return count;
+}
+
+/*
+ * Enabling clock gating will make the core call out to the host
+ * once up and once down when it performs a request or card operation
+ * intermingled in any fashion. The driver will see this through
+ * set_ios() operations with ios.clock field set to 0 to gate (disable)
+ * the block clock, and to the old frequency to enable it again.
+ */
+static void mmc_host_clk_gate_delayed(struct mmc_host *host)
+{
+	unsigned long tick_ns;
+	unsigned long freq = host->ios.clock;
+	unsigned long flags;
+
+	if (!freq) {
+		pr_debug("%s: frequency set to 0 in disable function, "
+			 "this means the clock is already disabled.\n",
+			 mmc_hostname(host));
+		return;
+	}
+	/*
+	 * New requests may have appeared while we were scheduling,
+	 * then there is no reason to delay the check before
+	 * clk_disable().
+	 */
+	spin_lock_irqsave(&host->clk_lock, flags);
+
+	/*
+	 * Delay n bus cycles (at least 8 from MMC spec) before attempting
+	 * to disable the MCI block clock. The reference count may have
+	 * gone up again after this delay due to rescheduling!
+	 */
+	if (!host->clk_requests) {
+		spin_unlock_irqrestore(&host->clk_lock, flags);
+		tick_ns = DIV_ROUND_UP(1000000000, freq);
+		ndelay(host->clk_delay * tick_ns);
+	} else {
+		/* New users appeared while waiting for this work */
+		spin_unlock_irqrestore(&host->clk_lock, flags);
+		return;
+	}
+	mutex_lock(&host->clk_gate_mutex);
+	spin_lock_irqsave(&host->clk_lock, flags);
+	if (!host->clk_requests) {
+		spin_unlock_irqrestore(&host->clk_lock, flags);
+		/* This will set host->ios.clock to 0 */
+		mmc_gate_clock(host);
+		spin_lock_irqsave(&host->clk_lock, flags);
+		pr_debug("%s: gated MCI clock\n", mmc_hostname(host));
+	}
+	spin_unlock_irqrestore(&host->clk_lock, flags);
+	mutex_unlock(&host->clk_gate_mutex);
+}
+
+/*
+ * Internal work. Work to disable the clock at some later point.
+ */
+static void mmc_host_clk_gate_work(struct work_struct *work)
+{
+	struct mmc_host *host = container_of(work, struct mmc_host,
+					      clk_gate_work.work);
+
+	mmc_host_clk_gate_delayed(host);
+}
+
+/**
+ *	mmc_host_clk_hold - ungate hardware MCI clocks
+ *	@host: host to ungate.
+ *
+ *	Makes sure the host ios.clock is restored to a non-zero value
+ *	past this call.	Increase clock reference count and ungate clock
+ *	if we're the first user.
+ */
+void mmc_host_clk_hold(struct mmc_host *host)
+{
+	unsigned long flags;
+
+	/* cancel any clock gating work scheduled by mmc_host_clk_release() */
+	cancel_delayed_work_sync(&host->clk_gate_work);
+	mutex_lock(&host->clk_gate_mutex);
+	spin_lock_irqsave(&host->clk_lock, flags);
+	if (host->clk_gated) {
+		spin_unlock_irqrestore(&host->clk_lock, flags);
+		mmc_ungate_clock(host);
+		spin_lock_irqsave(&host->clk_lock, flags);
+		pr_debug("%s: ungated MCI clock\n", mmc_hostname(host));
+	}
+	host->clk_requests++;
+	spin_unlock_irqrestore(&host->clk_lock, flags);
+	mutex_unlock(&host->clk_gate_mutex);
+}
+
+/**
+ *	mmc_host_may_gate_card - check if this card may be gated
+ *	@card: card to check.
+ */
+static bool mmc_host_may_gate_card(struct mmc_card *card)
+{
+	/* If there is no card we may gate it */
+	if (!card)
+		return true;
+	/*
+	 * Don't gate SDIO cards! These need to be clocked at all times
+	 * since they may be independent systems generating interrupts
+	 * and other events. The clock requests counter from the core will
+	 * go down to zero since the core does not need it, but we will not
+	 * gate the clock, because there is somebody out there that may still
+	 * be using it.
+	 */
+	return !(card->quirks & MMC_QUIRK_BROKEN_CLK_GATING);
+}
+
+/**
+ *	mmc_host_clk_release - gate off hardware MCI clocks
+ *	@host: host to gate.
+ *
+ *	Calls the host driver with ios.clock set to zero as often as possible
+ *	in order to gate off hardware MCI clocks. Decrease clock reference
+ *	count and schedule disabling of clock.
+ */
+void mmc_host_clk_release(struct mmc_host *host)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->clk_lock, flags);
+	host->clk_requests--;
+	if (mmc_host_may_gate_card(host->card) &&
+	    !host->clk_requests)
+		schedule_delayed_work(&host->clk_gate_work,
+				      msecs_to_jiffies(host->clkgate_delay));
+	spin_unlock_irqrestore(&host->clk_lock, flags);
+}
+
+/**
+ *	mmc_host_clk_rate - get current clock frequency setting
+ *	@host: host to get the clock frequency for.
+ *
+ *	Returns current clock frequency regardless of gating.
+ */
+unsigned int mmc_host_clk_rate(struct mmc_host *host)
+{
+	unsigned long freq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->clk_lock, flags);
+	if (host->clk_gated)
+		freq = host->clk_old;
+	else
+		freq = host->ios.clock;
+	spin_unlock_irqrestore(&host->clk_lock, flags);
+	return freq;
+}
+
+/**
+ *	mmc_host_clk_init - set up clock gating code
+ *	@host: host with potential clock to control
+ */
+static inline void mmc_host_clk_init(struct mmc_host *host)
+{
+	host->clk_requests = 0;
+	/* Hold MCI clock for 8 cycles by default */
+	host->clk_delay = 8;
+	/*
+	 * Default clock gating delay is 0ms to avoid wasting power.
+	 * This value can be tuned by writing into sysfs entry.
+	 */
+	host->clkgate_delay = 0;
+	host->clk_gated = false;
+	INIT_DELAYED_WORK(&host->clk_gate_work, mmc_host_clk_gate_work);
+	spin_lock_init(&host->clk_lock);
+	mutex_init(&host->clk_gate_mutex);
+}
+
+/**
+ *	mmc_host_clk_exit - shut down clock gating code
+ *	@host: host with potential clock to control
+ */
+static inline void mmc_host_clk_exit(struct mmc_host *host)
+{
+	/*
+	 * Wait for any outstanding gate and then make sure we're
+	 * ungated before exiting.
+	 */
+	if (cancel_delayed_work_sync(&host->clk_gate_work))
+		mmc_host_clk_gate_delayed(host);
+	if (host->clk_gated)
+		mmc_host_clk_hold(host);
+	/* There should be only one user now */
+	WARN_ON(host->clk_requests > 1);
+}
+
+static inline void mmc_host_clk_sysfs_init(struct mmc_host *host)
+{
+	host->clkgate_delay_attr.show = clkgate_delay_show;
+	host->clkgate_delay_attr.store = clkgate_delay_store;
+	sysfs_attr_init(&host->clkgate_delay_attr.attr);
+	host->clkgate_delay_attr.attr.name = "clkgate_delay";
+	host->clkgate_delay_attr.attr.mode = S_IRUGO | S_IWUSR;
+	if (device_create_file(&host->class_dev, &host->clkgate_delay_attr))
+		pr_err("%s: Failed to create clkgate_delay sysfs entry\n",
+				mmc_hostname(host));
+}
+#else
+
+static inline void mmc_host_clk_init(struct mmc_host *host)
+{
+}
+
+static inline void mmc_host_clk_exit(struct mmc_host *host)
+{
+}
+
+static inline void mmc_host_clk_sysfs_init(struct mmc_host *host)
+{
+}
+
+#endif
+
+/**
+ *	mmc_of_parse() - parse host's device-tree node
+ *	@host: host whose node should be parsed.
+ *
+ * To keep the rest of the MMC subsystem unaware of whether DT has been
+ * used to to instantiate and configure this host instance or not, we
+ * parse the properties and set respective generic mmc-host flags and
+ * parameters.
+ */
+int mmc_of_parse(struct mmc_host *host)
+{
+	struct device_node *np;
+	u32 bus_width;
+	int len, ret;
+	bool cd_cap_invert, cd_gpio_invert = false;
+	bool ro_cap_invert, ro_gpio_invert = false;
+	u32 device_strength;
+
+	if (!host->parent || !host->parent->of_node)
+		return 0;
+
+	np = host->parent->of_node;
+
+	/* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */
+	if (of_property_read_u32(np, "bus-width", &bus_width) < 0) {
+		dev_dbg(host->parent,
+			"\"bus-width\" property is missing, assuming 1 bit.\n");
+		bus_width = 1;
+	}
+
+	switch (bus_width) {
+	case 8:
+		host->caps |= MMC_CAP_8_BIT_DATA;
+		/* Hosts capable of 8-bit transfers can also do 4 bits */
+	case 4:
+		host->caps |= MMC_CAP_4_BIT_DATA;
+		break;
+	case 1:
+		break;
+	default:
+		dev_err(host->parent,
+			"Invalid \"bus-width\" value %u!\n", bus_width);
+		return -EINVAL;
+	}
+
+	/* f_max is obtained from the optional "max-frequency" property */
+	of_property_read_u32(np, "max-frequency", &host->f_max);
+
+	/*
+	 * Configure CD and WP pins. They are both by default active low to
+	 * match the SDHCI spec. If GPIOs are provided for CD and / or WP, the
+	 * mmc-gpio helpers are used to attach, configure and use them. If
+	 * polarity inversion is specified in DT, one of MMC_CAP2_CD_ACTIVE_HIGH
+	 * and MMC_CAP2_RO_ACTIVE_HIGH capability-2 flags is set. If the
+	 * "broken-cd" property is provided, the MMC_CAP_NEEDS_POLL capability
+	 * is set. If the "non-removable" property is found, the
+	 * MMC_CAP_NONREMOVABLE capability is set and no card-detection
+	 * configuration is performed.
+	 */
+
+	/* Parse Card Detection */
+	if (of_find_property(np, "non-removable", &len)) {
+		host->caps |= MMC_CAP_NONREMOVABLE;
+	} else {
+		cd_cap_invert = of_property_read_bool(np, "cd-inverted");
+
+		if (of_find_property(np, "broken-cd", &len))
+			host->caps |= MMC_CAP_NEEDS_POLL;
+
+		ret = mmc_gpiod_request_cd(host, "cd", 0, true,
+					   0, &cd_gpio_invert);
+		if (ret) {
+			if (ret == -EPROBE_DEFER)
+				return ret;
+			if (ret != -ENOENT) {
+				dev_err(host->parent,
+					"Failed to request CD GPIO: %d\n",
+					ret);
+			}
+		} else
+			dev_info(host->parent, "Got CD GPIO\n");
+
+		/*
+		 * There are two ways to flag that the CD line is inverted:
+		 * through the cd-inverted flag and by the GPIO line itself
+		 * being inverted from the GPIO subsystem. This is a leftover
+		 * from the times when the GPIO subsystem did not make it
+		 * possible to flag a line as inverted.
+		 *
+		 * If the capability on the host AND the GPIO line are
+		 * both inverted, the end result is that the CD line is
+		 * not inverted.
+		 */
+		if (cd_cap_invert ^ cd_gpio_invert)
+			host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
+	}
+
+	/* Parse Write Protection */
+	ro_cap_invert = of_property_read_bool(np, "wp-inverted");
+
+	ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert);
+	if (ret) {
+		if (ret == -EPROBE_DEFER)
+			goto out;
+		if (ret != -ENOENT) {
+			dev_err(host->parent,
+				"Failed to request WP GPIO: %d\n",
+				ret);
+		}
+	} else
+		dev_info(host->parent, "Got WP GPIO\n");
+
+	/* See the comment on CD inversion above */
+	if (ro_cap_invert ^ ro_gpio_invert)
+		host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+
+	if (of_find_property(np, "cap-sd-highspeed", &len))
+		host->caps |= MMC_CAP_SD_HIGHSPEED;
+	if (of_find_property(np, "cap-mmc-highspeed", &len))
+		host->caps |= MMC_CAP_MMC_HIGHSPEED;
+	if (of_find_property(np, "sd-uhs-sdr12", &len))
+		host->caps |= MMC_CAP_UHS_SDR12;
+	if (of_find_property(np, "sd-uhs-sdr25", &len))
+		host->caps |= MMC_CAP_UHS_SDR25;
+	if (of_find_property(np, "sd-uhs-sdr50", &len))
+		host->caps |= MMC_CAP_UHS_SDR50;
+	if (of_find_property(np, "sd-uhs-sdr104", &len))
+		host->caps |= MMC_CAP_UHS_SDR104;
+	if (of_find_property(np, "sd-uhs-ddr50", &len))
+		host->caps |= MMC_CAP_UHS_DDR50;
+	if (of_find_property(np, "cap-power-off-card", &len))
+		host->caps |= MMC_CAP_POWER_OFF_CARD;
+	if (of_find_property(np, "cap-sdio-irq", &len))
+		host->caps |= MMC_CAP_SDIO_IRQ;
+	if (of_find_property(np, "full-pwr-cycle", &len))
+		host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE;
+	if (of_find_property(np, "keep-power-in-suspend", &len))
+		host->pm_caps |= MMC_PM_KEEP_POWER;
+	if (of_find_property(np, "enable-sdio-wakeup", &len))
+		host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+	if (of_find_property(np, "mmc-ddr-1_8v", &len))
+		host->caps |= MMC_CAP_1_8V_DDR;
+	if (of_find_property(np, "mmc-ddr-1_2v", &len))
+		host->caps |= MMC_CAP_1_2V_DDR;
+	if (of_find_property(np, "mmc-hs200-1_8v", &len))
+		host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
+	if (of_find_property(np, "mmc-hs200-1_2v", &len))
+		host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
+	if (of_find_property(np, "mmc-hs400-1_8v", &len))
+		host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
+	if (of_find_property(np, "mmc-hs400-1_2v", &len))
+		host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
+	if (of_find_property(np, "supports-hs400-enhanced-strobe", NULL))
+		host->caps2 |= MMC_CAP2_STROBE_ENHANCED;
+	if (of_find_property(np, "skip-init-mmc-scan", NULL))
+		host->caps2 |= MMC_CAP2_SKIP_INIT_SCAN;
+
+	host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr);
+	if (host->dsr_req && (host->dsr & ~0xffff)) {
+		dev_err(host->parent,
+			"device tree specified broken value for DSR: 0x%x, ignoring\n",
+			host->dsr);
+		host->dsr_req = 0;
+	}
+
+	if (!of_property_read_u32(np, "device_drv", &device_strength))
+		host->device_drv = device_strength << 4;
+	else
+		host->device_drv = MMC_DRIVER_TYPE_0;
+	return 0;
+
+out:
+	mmc_gpio_free_cd(host);
+	return ret;
+}
+
+EXPORT_SYMBOL(mmc_of_parse);
+
+/**
+ *	mmc_alloc_host - initialise the per-host structure.
+ *	@extra: sizeof private data structure
+ *	@dev: pointer to host device model structure
+ *
+ *	Initialise the per-host structure.
+ */
+struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
+{
+	int err;
+	struct mmc_host *host;
+
+	host = kzalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL);
+	if (!host)
+		return NULL;
+
+	/* scanning will be enabled when we're ready */
+	host->rescan_disable = 1;
+	idr_preload(GFP_KERNEL);
+	spin_lock(&mmc_host_lock);
+	err = idr_alloc(&mmc_host_idr, host, 0, 0, GFP_NOWAIT);
+	if (err >= 0)
+		host->index = err;
+	spin_unlock(&mmc_host_lock);
+	idr_preload_end();
+	if (err < 0)
+		goto free;
+
+	dev_set_name(&host->class_dev, "mmc%d", host->index);
+
+	host->parent = dev;
+	host->class_dev.parent = dev;
+	host->class_dev.class = &mmc_host_class;
+	device_initialize(&host->class_dev);
+
+	mmc_host_clk_init(host);
+
+	mutex_init(&host->slot.lock);
+	host->slot.cd_irq = -EINVAL;
+
+	spin_lock_init(&host->lock);
+	init_waitqueue_head(&host->wq);
+	host->wlock_name = kasprintf(GFP_KERNEL,
+			"%s_detect", mmc_hostname(host));
+	wake_lock_init(&host->detect_wake_lock, WAKE_LOCK_SUSPEND,
+			host->wlock_name);
+	INIT_DELAYED_WORK(&host->detect, mmc_rescan);
+#ifdef CONFIG_PM
+	host->pm_notify.notifier_call = mmc_pm_notify;
+#endif
+
+	/*
+	 * By default, hosts do not support SGIO or large requests.
+	 * They have to set these according to their abilities.
+	 */
+	host->max_segs = 1;
+	host->max_seg_size = PAGE_CACHE_SIZE;
+
+	host->max_req_size = PAGE_CACHE_SIZE;
+	host->max_blk_size = 512;
+	host->max_blk_count = PAGE_CACHE_SIZE / 512;
+
+	return host;
+
+free:
+	kfree(host);
+	return NULL;
+}
+
+EXPORT_SYMBOL(mmc_alloc_host);
+
+/**
+ *	mmc_add_host - initialise host hardware
+ *	@host: mmc host
+ *
+ *	Register the host with the driver model. The host must be
+ *	prepared to start servicing requests before this function
+ *	completes.
+ */
+int mmc_add_host(struct mmc_host *host)
+{
+	int err;
+
+	WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) &&
+		!host->ops->enable_sdio_irq);
+
+	err = device_add(&host->class_dev);
+	if (err)
+		return err;
+
+	led_trigger_register_simple(dev_name(&host->class_dev), &host->led);
+
+#ifdef CONFIG_DEBUG_FS
+	mmc_add_host_debugfs(host);
+#endif
+	mmc_host_clk_sysfs_init(host);
+
+	mmc_start_host(host);
+	if (!(host->pm_flags & MMC_PM_IGNORE_PM_NOTIFY))
+		register_pm_notifier(&host->pm_notify);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(mmc_add_host);
+
+/**
+ *	mmc_remove_host - remove host hardware
+ *	@host: mmc host
+ *
+ *	Unregister and remove all cards associated with this host,
+ *	and power down the MMC bus. No new requests will be issued
+ *	after this function has returned.
+ */
+void mmc_remove_host(struct mmc_host *host)
+{
+	if (!(host->pm_flags & MMC_PM_IGNORE_PM_NOTIFY))
+		unregister_pm_notifier(&host->pm_notify);
+
+	mmc_stop_host(host);
+
+#ifdef CONFIG_DEBUG_FS
+	mmc_remove_host_debugfs(host);
+#endif
+
+	device_del(&host->class_dev);
+
+	led_trigger_unregister_simple(host->led);
+
+	mmc_host_clk_exit(host);
+}
+
+EXPORT_SYMBOL(mmc_remove_host);
+
+/**
+ *	mmc_free_host - free the host structure
+ *	@host: mmc host
+ *
+ *	Free the host once all references to it have been dropped.
+ */
+void mmc_free_host(struct mmc_host *host)
+{
+	spin_lock(&mmc_host_lock);
+	idr_remove(&mmc_host_idr, host->index);
+	spin_unlock(&mmc_host_lock);
+	wake_lock_destroy(&host->detect_wake_lock);
+
+	put_device(&host->class_dev);
+}
+
+EXPORT_SYMBOL(mmc_free_host);

drivers/mmc/core/host.h

@@ -0,0 +1,19 @@
+/*
+ *  linux/drivers/mmc/core/host.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *  Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _MMC_CORE_HOST_H
+#define _MMC_CORE_HOST_H
+#include <linux/mmc/host.h>
+
+int mmc_register_host_class(void);
+void mmc_unregister_host_class(void);
+
+#endif
+

drivers/mmc/core/mmc_ops.c

@@ -0,0 +1,677 @@
+/*
+ *  linux/drivers/mmc/core/mmc_ops.h
+ *
+ *  Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/scatterlist.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/mmc.h>
+
+#include "core.h"
+#include "mmc_ops.h"
+
+#define MMC_OPS_TIMEOUT_MS	(10 * 60 * 1000) /* 10 minute timeout */
+
+static inline int __mmc_send_status(struct mmc_card *card, u32 *status,
+				    bool ignore_crc)
+{
+	int err;
+	struct mmc_command cmd = {0};
+
+	BUG_ON(!card);
+	BUG_ON(!card->host);
+
+	cmd.opcode = MMC_SEND_STATUS;
+	if (!mmc_host_is_spi(card->host))
+		cmd.arg = card->rca << 16;
+	cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
+	if (ignore_crc)
+		cmd.flags &= ~MMC_RSP_CRC;
+
+	err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+	if (err)
+		return err;
+
+	/* NOTE: callers are required to understand the difference
+	 * between "native" and SPI format status words!
+	 */
+	if (status)
+		*status = cmd.resp[0];
+
+	return 0;
+}
+
+int mmc_send_status(struct mmc_card *card, u32 *status)
+{
+	return __mmc_send_status(card, status, false);
+}
+
+static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
+{
+	int err;
+	struct mmc_command cmd = {0};
+
+	BUG_ON(!host);
+
+	cmd.opcode = MMC_SELECT_CARD;
+
+	if (card) {
+		cmd.arg = card->rca << 16;
+		cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+	} else {
+		cmd.arg = 0;
+		cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
+	}
+
+	err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+int mmc_select_card(struct mmc_card *card)
+{
+	BUG_ON(!card);
+
+	return _mmc_select_card(card->host, card);
+}
+
+int mmc_deselect_cards(struct mmc_host *host)
+{
+	return _mmc_select_card(host, NULL);
+}
+
+/*
+ * Write the value specified in the device tree or board code into the optional
+ * 16 bit Driver Stage Register. This can be used to tune raise/fall times and
+ * drive strength of the DAT and CMD outputs. The actual meaning of a given
+ * value is hardware dependant.
+ * The presence of the DSR register can be determined from the CSD register,
+ * bit 76.
+ */
+int mmc_set_dsr(struct mmc_host *host)
+{
+	struct mmc_command cmd = {0};
+
+	cmd.opcode = MMC_SET_DSR;
+
+	cmd.arg = (host->dsr << 16) | 0xffff;
+	cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
+
+	return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+}
+
+int mmc_go_idle(struct mmc_host *host)
+{
+	int err;
+	struct mmc_command cmd = {0};
+
+	/*
+	 * Non-SPI hosts need to prevent chipselect going active during
+	 * GO_IDLE; that would put chips into SPI mode.  Remind them of
+	 * that in case of hardware that won't pull up DAT3/nCS otherwise.
+	 *
+	 * SPI hosts ignore ios.chip_select; it's managed according to
+	 * rules that must accommodate non-MMC slaves which this layer
+	 * won't even know about.
+	 */
+	if (!mmc_host_is_spi(host)) {
+		mmc_set_chip_select(host, MMC_CS_HIGH);
+		mmc_delay(1);
+	}
+
+	cmd.opcode = MMC_GO_IDLE_STATE;
+	cmd.arg = 0;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+
+	mmc_delay(1);
+
+	if (!mmc_host_is_spi(host)) {
+		mmc_set_chip_select(host, MMC_CS_DONTCARE);
+		mmc_delay(1);
+	}
+
+	host->use_spi_crc = 0;
+
+	return err;
+}
+
+int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
+{
+	struct mmc_command cmd = {0};
+	int i, err = 0;
+
+	BUG_ON(!host);
+
+	cmd.opcode = MMC_SEND_OP_COND;
+	cmd.arg = mmc_host_is_spi(host) ? 0 : ocr;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
+
+	for (i = 100; i; i--) {
+		err = mmc_wait_for_cmd(host, &cmd, 0);
+		if (err)
+			break;
+
+		/* if we're just probing, do a single pass */
+		if (ocr == 0)
+			break;
+
+		/* otherwise wait until reset completes */
+		if (mmc_host_is_spi(host)) {
+			if (!(cmd.resp[0] & R1_SPI_IDLE))
+				break;
+		} else {
+			if (cmd.resp[0] & MMC_CARD_BUSY)
+				break;
+		}
+
+		err = -ETIMEDOUT;
+
+		mmc_delay(10);
+	}
+
+	if (rocr && !mmc_host_is_spi(host))
+		*rocr = cmd.resp[0];
+
+	return err;
+}
+
+int mmc_all_send_cid(struct mmc_host *host, u32 *cid)
+{
+	int err;
+	struct mmc_command cmd = {0};
+
+	BUG_ON(!host);
+	BUG_ON(!cid);
+
+	cmd.opcode = MMC_ALL_SEND_CID;
+	cmd.arg = 0;
+	cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
+
+	err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+	if (err)
+		return err;
+
+	memcpy(cid, cmd.resp, sizeof(u32) * 4);
+
+	return 0;
+}
+
+int mmc_set_relative_addr(struct mmc_card *card)
+{
+	int err;
+	struct mmc_command cmd = {0};
+
+	BUG_ON(!card);
+	BUG_ON(!card->host);
+
+	cmd.opcode = MMC_SET_RELATIVE_ADDR;
+	cmd.arg = card->rca << 16;
+	cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+	err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int
+mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode)
+{
+	int err;
+	struct mmc_command cmd = {0};
+
+	BUG_ON(!host);
+	BUG_ON(!cxd);
+
+	cmd.opcode = opcode;
+	cmd.arg = arg;
+	cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;
+
+	err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+	if (err)
+		return err;
+
+	memcpy(cxd, cmd.resp, sizeof(u32) * 4);
+
+	return 0;
+}
+
+/*
+ * NOTE: void *buf, caller for the buf is required to use DMA-capable
+ * buffer or on-stack buffer (with some overhead in callee).
+ */
+static int
+mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
+		u32 opcode, void *buf, unsigned len)
+{
+	struct mmc_request mrq = {NULL};
+	struct mmc_command cmd = {0};
+	struct mmc_data data = {0};
+	struct scatterlist sg;
+	void *data_buf;
+	int is_on_stack;
+
+	is_on_stack = object_is_on_stack(buf);
+	if (is_on_stack) {
+		/*
+		 * dma onto stack is unsafe/nonportable, but callers to this
+		 * routine normally provide temporary on-stack buffers ...
+		 */
+		data_buf = kmalloc(len, GFP_KERNEL);
+		if (!data_buf)
+			return -ENOMEM;
+	} else
+		data_buf = buf;
+
+	mrq.cmd = &cmd;
+	mrq.data = &data;
+
+	cmd.opcode = opcode;
+	cmd.arg = 0;
+
+	/* NOTE HACK:  the MMC_RSP_SPI_R1 is always correct here, but we
+	 * rely on callers to never use this with "native" calls for reading
+	 * CSD or CID.  Native versions of those commands use the R2 type,
+	 * not R1 plus a data block.
+	 */
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+	data.blksz = len;
+	data.blocks = 1;
+	data.flags = MMC_DATA_READ;
+	data.sg = &sg;
+	data.sg_len = 1;
+
+	sg_init_one(&sg, data_buf, len);
+
+	if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
+		/*
+		 * The spec states that CSR and CID accesses have a timeout
+		 * of 64 clock cycles.
+		 */
+		data.timeout_ns = 0;
+		data.timeout_clks = 64;
+	} else
+		mmc_set_data_timeout(&data, card);
+
+	mmc_wait_for_req(host, &mrq);
+
+	if (is_on_stack) {
+		memcpy(buf, data_buf, len);
+		kfree(data_buf);
+	}
+
+	if (cmd.error)
+		return cmd.error;
+	if (data.error)
+		return data.error;
+
+	return 0;
+}
+
+int mmc_send_csd(struct mmc_card *card, u32 *csd)
+{
+	int ret, i;
+	u32 *csd_tmp;
+
+	if (!mmc_host_is_spi(card->host))
+		return mmc_send_cxd_native(card->host, card->rca << 16,
+				csd, MMC_SEND_CSD);
+
+	csd_tmp = kmalloc(16, GFP_KERNEL);
+	if (!csd_tmp)
+		return -ENOMEM;
+
+	ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd_tmp, 16);
+	if (ret)
+		goto err;
+
+	for (i = 0;i < 4;i++)
+		csd[i] = be32_to_cpu(csd_tmp[i]);
+
+err:
+	kfree(csd_tmp);
+	return ret;
+}
+
+int mmc_send_cid(struct mmc_host *host, u32 *cid)
+{
+	int ret, i;
+	u32 *cid_tmp;
+
+	if (!mmc_host_is_spi(host)) {
+		if (!host->card)
+			return -EINVAL;
+		return mmc_send_cxd_native(host, host->card->rca << 16,
+				cid, MMC_SEND_CID);
+	}
+
+	cid_tmp = kmalloc(16, GFP_KERNEL);
+	if (!cid_tmp)
+		return -ENOMEM;
+
+	ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid_tmp, 16);
+	if (ret)
+		goto err;
+
+	for (i = 0;i < 4;i++)
+		cid[i] = be32_to_cpu(cid_tmp[i]);
+
+err:
+	kfree(cid_tmp);
+	return ret;
+}
+
+int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
+{
+	return mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD,
+			ext_csd, 512);
+}
+EXPORT_SYMBOL_GPL(mmc_send_ext_csd);
+
+int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
+{
+	struct mmc_command cmd = {0};
+	int err;
+
+	cmd.opcode = MMC_SPI_READ_OCR;
+	cmd.arg = highcap ? (1 << 30) : 0;
+	cmd.flags = MMC_RSP_SPI_R3;
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+
+	*ocrp = cmd.resp[1];
+	return err;
+}
+
+int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
+{
+	struct mmc_command cmd = {0};
+	int err;
+
+	cmd.opcode = MMC_SPI_CRC_ON_OFF;
+	cmd.flags = MMC_RSP_SPI_R1;
+	cmd.arg = use_crc;
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (!err)
+		host->use_spi_crc = use_crc;
+	return err;
+}
+
+/**
+ *	__mmc_switch - modify EXT_CSD register
+ *	@card: the MMC card associated with the data transfer
+ *	@set: cmd set values
+ *	@index: EXT_CSD register index
+ *	@value: value to program into EXT_CSD register
+ *	@timeout_ms: timeout (ms) for operation performed by register write,
+ *                   timeout of zero implies maximum possible timeout
+ *	@use_busy_signal: use the busy signal as response type
+ *	@send_status: send status cmd to poll for busy
+ *	@ignore_crc: ignore CRC errors when sending status cmd to poll for busy
+ *
+ *	Modifies the EXT_CSD register for selected card.
+ */
+int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
+		unsigned int timeout_ms, bool use_busy_signal, bool send_status,
+		bool ignore_crc)
+{
+	struct mmc_host *host = card->host;
+	int err;
+	struct mmc_command cmd = {0};
+	unsigned long timeout;
+	u32 status = 0;
+	bool use_r1b_resp = use_busy_signal;
+
+	/*
+	 * If the cmd timeout and the max_busy_timeout of the host are both
+	 * specified, let's validate them. A failure means we need to prevent
+	 * the host from doing hw busy detection, which is done by converting
+	 * to a R1 response instead of a R1B.
+	 */
+	if (timeout_ms && host->max_busy_timeout &&
+		(timeout_ms > host->max_busy_timeout))
+		use_r1b_resp = false;
+
+	cmd.opcode = MMC_SWITCH;
+	cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+		  (index << 16) |
+		  (value << 8) |
+		  set;
+	cmd.flags = MMC_CMD_AC;
+	if (use_r1b_resp) {
+		cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B;
+		/*
+		 * A busy_timeout of zero means the host can decide to use
+		 * whatever value it finds suitable.
+		 */
+		cmd.busy_timeout = timeout_ms;
+	} else {
+		cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1;
+	}
+
+	if (index == EXT_CSD_SANITIZE_START)
+		cmd.sanitize_busy = true;
+
+	err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+	if (err)
+		return err;
+
+	/* No need to check card status in case of unblocking command */
+	if (!use_busy_signal)
+		return 0;
+
+	/*
+	 * CRC errors shall only be ignored in cases were CMD13 is used to poll
+	 * to detect busy completion.
+	 */
+	if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
+		ignore_crc = false;
+
+	/* We have an unspecified cmd timeout, use the fallback value. */
+	if (!timeout_ms)
+		timeout_ms = MMC_OPS_TIMEOUT_MS;
+
+	/* Must check status to be sure of no errors. */
+	timeout = jiffies + msecs_to_jiffies(timeout_ms);
+	do {
+		if (send_status) {
+			err = __mmc_send_status(card, &status, ignore_crc);
+			if (err)
+				return err;
+		}
+		if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
+			break;
+		if (mmc_host_is_spi(host))
+			break;
+
+		/*
+		 * We are not allowed to issue a status command and the host
+		 * does'nt support MMC_CAP_WAIT_WHILE_BUSY, then we can only
+		 * rely on waiting for the stated timeout to be sufficient.
+		 */
+		if (!send_status) {
+			mmc_delay(timeout_ms);
+			return 0;
+		}
+
+		/* Timeout if the device never leaves the program state. */
+		if (time_after(jiffies, timeout)) {
+			pr_err("%s: Card stuck in programming state! %s\n",
+				mmc_hostname(host), __func__);
+			return -ETIMEDOUT;
+		}
+	} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
+
+	if (mmc_host_is_spi(host)) {
+		if (status & R1_SPI_ILLEGAL_COMMAND)
+			return -EBADMSG;
+	} else {
+		if (status & 0xFDFFA000)
+			pr_warn("%s: unexpected status %#x after switch\n",
+				mmc_hostname(host), status);
+		if (status & R1_SWITCH_ERROR)
+			return -EBADMSG;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__mmc_switch);
+
+int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
+		unsigned int timeout_ms)
+{
+	return __mmc_switch(card, set, index, value, timeout_ms, true, true,
+				false);
+}
+EXPORT_SYMBOL_GPL(mmc_switch);
+
+static int
+mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
+		  u8 len)
+{
+	struct mmc_request mrq = {NULL};
+	struct mmc_command cmd = {0};
+	struct mmc_data data = {0};
+	struct scatterlist sg;
+	u8 *data_buf;
+	u8 *test_buf;
+	int i, err;
+	static u8 testdata_8bit[8] = { 0x55, 0xaa, 0, 0, 0, 0, 0, 0 };
+	static u8 testdata_4bit[4] = { 0x5a, 0, 0, 0 };
+
+	/* dma onto stack is unsafe/nonportable, but callers to this
+	 * routine normally provide temporary on-stack buffers ...
+	 */
+	data_buf = kmalloc(len, GFP_KERNEL);
+	if (!data_buf)
+		return -ENOMEM;
+
+	if (len == 8)
+		test_buf = testdata_8bit;
+	else if (len == 4)
+		test_buf = testdata_4bit;
+	else {
+		pr_err("%s: Invalid bus_width %d\n",
+		       mmc_hostname(host), len);
+		kfree(data_buf);
+		return -EINVAL;
+	}
+
+	if (opcode == MMC_BUS_TEST_W)
+		memcpy(data_buf, test_buf, len);
+
+	mrq.cmd = &cmd;
+	mrq.data = &data;
+	cmd.opcode = opcode;
+	cmd.arg = 0;
+
+	/* NOTE HACK:  the MMC_RSP_SPI_R1 is always correct here, but we
+	 * rely on callers to never use this with "native" calls for reading
+	 * CSD or CID.  Native versions of those commands use the R2 type,
+	 * not R1 plus a data block.
+	 */
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+	data.blksz = len;
+	data.blocks = 1;
+	if (opcode == MMC_BUS_TEST_R)
+		data.flags = MMC_DATA_READ;
+	else
+		data.flags = MMC_DATA_WRITE;
+
+	data.sg = &sg;
+	data.sg_len = 1;
+	mmc_set_data_timeout(&data, card);
+	sg_init_one(&sg, data_buf, len);
+	mmc_wait_for_req(host, &mrq);
+	err = 0;
+	if (opcode == MMC_BUS_TEST_R) {
+		for (i = 0; i < len / 4; i++)
+			if ((test_buf[i] ^ data_buf[i]) != 0xff) {
+				err = -EIO;
+				break;
+			}
+	}
+	kfree(data_buf);
+
+	if (cmd.error)
+		return cmd.error;
+	if (data.error)
+		return data.error;
+
+	return err;
+}
+
+int mmc_bus_test(struct mmc_card *card, u8 bus_width)
+{
+	int err, width;
+
+	if (bus_width == MMC_BUS_WIDTH_8)
+		width = 8;
+	else if (bus_width == MMC_BUS_WIDTH_4)
+		width = 4;
+	else if (bus_width == MMC_BUS_WIDTH_1)
+		return 0; /* no need for test */
+	else
+		return -EINVAL;
+
+	/*
+	 * Ignore errors from BUS_TEST_W.  BUS_TEST_R will fail if there
+	 * is a problem.  This improves chances that the test will work.
+	 */
+	mmc_send_bus_test(card, card->host, MMC_BUS_TEST_W, width);
+	err = mmc_send_bus_test(card, card->host, MMC_BUS_TEST_R, width);
+	return err;
+}
+
+int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
+{
+	struct mmc_command cmd = {0};
+	unsigned int opcode;
+	int err;
+
+	if (!card->ext_csd.hpi) {
+		pr_warn("%s: Card didn't support HPI command\n",
+			mmc_hostname(card->host));
+		return -EINVAL;
+	}
+
+	opcode = card->ext_csd.hpi_cmd;
+	if (opcode == MMC_STOP_TRANSMISSION)
+		cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+	else if (opcode == MMC_SEND_STATUS)
+		cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+	cmd.opcode = opcode;
+	cmd.arg = card->rca << 16 | 1;
+
+	err = mmc_wait_for_cmd(card->host, &cmd, 0);
+	if (err) {
+		pr_warn("%s: error %d interrupting operation. "
+			"HPI command response %#x\n", mmc_hostname(card->host),
+			err, cmd.resp[0]);
+		return err;
+	}
+	if (status)
+		*status = cmd.resp[0];
+
+	return 0;
+}

drivers/mmc/core/mmc_ops.h

@@ -0,0 +1,32 @@
+/*
+ *  linux/drivers/mmc/core/mmc_ops.h
+ *
+ *  Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef _MMC_MMC_OPS_H
+#define _MMC_MMC_OPS_H
+
+int mmc_select_card(struct mmc_card *card);
+int mmc_deselect_cards(struct mmc_host *host);
+int mmc_set_dsr(struct mmc_host *host);
+int mmc_go_idle(struct mmc_host *host);
+int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
+int mmc_all_send_cid(struct mmc_host *host, u32 *cid);
+int mmc_set_relative_addr(struct mmc_card *card);
+int mmc_send_csd(struct mmc_card *card, u32 *csd);
+int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
+int mmc_send_status(struct mmc_card *card, u32 *status);
+int mmc_send_cid(struct mmc_host *host, u32 *cid);
+int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp);
+int mmc_spi_set_crc(struct mmc_host *host, int use_crc);
+int mmc_bus_test(struct mmc_card *card, u8 bus_width);
+int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status);
+
+#endif
+

drivers/mmc/core/quirks.c

@@ -0,0 +1,99 @@
+/*
+ *  This file contains work-arounds for many known SD/MMC
+ *  and SDIO hardware bugs.
+ *
+ *  Copyright (c) 2011 Andrei Warkentin <andreiw@motorola.com>
+ *  Copyright (c) 2011 Pierre Tardy <tardyp@gmail.com>
+ *  Inspired from pci fixup code:
+ *  Copyright (c) 1999 Martin Mares <mj@ucw.cz>
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_ids.h>
+
+#ifndef SDIO_VENDOR_ID_TI
+#define SDIO_VENDOR_ID_TI		0x0097
+#endif
+
+#ifndef SDIO_DEVICE_ID_TI_WL1271
+#define SDIO_DEVICE_ID_TI_WL1271	0x4076
+#endif
+
+#ifndef SDIO_VENDOR_ID_STE
+#define SDIO_VENDOR_ID_STE		0x0020
+#endif
+
+#ifndef SDIO_DEVICE_ID_STE_CW1200
+#define SDIO_DEVICE_ID_STE_CW1200	0x2280
+#endif
+
+#ifndef SDIO_DEVICE_ID_MARVELL_8797_F0
+#define SDIO_DEVICE_ID_MARVELL_8797_F0	0x9128
+#endif
+
+/*
+ * This hook just adds a quirk for all sdio devices
+ */
+static void add_quirk_for_sdio_devices(struct mmc_card *card, int data)
+{
+	if (mmc_card_sdio(card))
+		card->quirks |= data;
+}
+
+static const struct mmc_fixup mmc_fixup_methods[] = {
+	/* by default sdio devices are considered CLK_GATING broken */
+	/* good cards will be whitelisted as they are tested */
+	SDIO_FIXUP(SDIO_ANY_ID, SDIO_ANY_ID,
+		   add_quirk_for_sdio_devices,
+		   MMC_QUIRK_BROKEN_CLK_GATING),
+
+	SDIO_FIXUP(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271,
+		   remove_quirk, MMC_QUIRK_BROKEN_CLK_GATING),
+
+	SDIO_FIXUP(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271,
+		   add_quirk, MMC_QUIRK_NONSTD_FUNC_IF),
+
+	SDIO_FIXUP(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271,
+		   add_quirk, MMC_QUIRK_DISABLE_CD),
+
+	SDIO_FIXUP(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200,
+		   add_quirk, MMC_QUIRK_BROKEN_BYTE_MODE_512),
+
+	SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797_F0,
+		   add_quirk, MMC_QUIRK_BROKEN_IRQ_POLLING),
+
+	END_FIXUP
+};
+
+void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table)
+{
+	const struct mmc_fixup *f;
+	u64 rev = cid_rev_card(card);
+
+	/* Non-core specific workarounds. */
+	if (!table)
+		table = mmc_fixup_methods;
+
+	for (f = table; f->vendor_fixup; f++) {
+		if ((f->manfid == CID_MANFID_ANY ||
+		     f->manfid == card->cid.manfid) &&
+		    (f->oemid == CID_OEMID_ANY ||
+		     f->oemid == card->cid.oemid) &&
+		    (f->name == CID_NAME_ANY ||
+		     !strncmp(f->name, card->cid.prod_name,
+			      sizeof(card->cid.prod_name))) &&
+		    (f->cis_vendor == card->cis.vendor ||
+		     f->cis_vendor == (u16) SDIO_ANY_ID) &&
+		    (f->cis_device == card->cis.device ||
+		     f->cis_device == (u16) SDIO_ANY_ID) &&
+		    rev >= f->rev_start && rev <= f->rev_end) {
+			dev_dbg(&card->dev, "calling %pf\n", f->vendor_fixup);
+			f->vendor_fixup(card, f->data);
+		}
+	}
+}
+EXPORT_SYMBOL(mmc_fixup_device);

drivers/mmc/core/sd.h

@@ -0,0 +1,16 @@
+#ifndef _MMC_CORE_SD_H
+#define _MMC_CORE_SD_H
+
+#include <linux/mmc/card.h>
+
+extern struct device_type sd_type;
+
+int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr);
+int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card);
+void mmc_decode_cid(struct mmc_card *card);
+int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
+	bool reinit);
+unsigned mmc_sd_get_max_clock(struct mmc_card *card);
+int mmc_sd_switch_hs(struct mmc_card *card);
+
+#endif

drivers/mmc/core/sd_ops.c

@@ -0,0 +1,395 @@
+/*
+ *  linux/drivers/mmc/core/sd_ops.h
+ *
+ *  Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/export.h>
+#include <linux/scatterlist.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+
+#include "core.h"
+#include "sd_ops.h"
+
+int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
+{
+	int err;
+	struct mmc_command cmd = {0};
+
+	BUG_ON(!host);
+	BUG_ON(card && (card->host != host));
+
+	cmd.opcode = MMC_APP_CMD;
+
+	if (card) {
+		cmd.arg = card->rca << 16;
+		cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+	} else {
+		cmd.arg = 0;
+		cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_BCR;
+	}
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (err)
+		return err;
+
+	/* Check that card supported application commands */
+	if (!mmc_host_is_spi(host) && !(cmd.resp[0] & R1_APP_CMD))
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mmc_app_cmd);
+
+/**
+ *	mmc_wait_for_app_cmd - start an application command and wait for
+ 			       completion
+ *	@host: MMC host to start command
+ *	@card: Card to send MMC_APP_CMD to
+ *	@cmd: MMC command to start
+ *	@retries: maximum number of retries
+ *
+ *	Sends a MMC_APP_CMD, checks the card response, sends the command
+ *	in the parameter and waits for it to complete. Return any error
+ *	that occurred while the command was executing.  Do not attempt to
+ *	parse the response.
+ */
+int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card,
+	struct mmc_command *cmd, int retries)
+{
+	struct mmc_request mrq = {NULL};
+
+	int i, err;
+
+	BUG_ON(!cmd);
+	BUG_ON(retries < 0);
+
+	err = -EIO;
+
+	/*
+	 * We have to resend MMC_APP_CMD for each attempt so
+	 * we cannot use the retries field in mmc_command.
+	 */
+	for (i = 0;i <= retries;i++) {
+		err = mmc_app_cmd(host, card);
+		if (err) {
+			/* no point in retrying; no APP commands allowed */
+			if (mmc_host_is_spi(host)) {
+				if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
+					break;
+			}
+			continue;
+		}
+
+		memset(&mrq, 0, sizeof(struct mmc_request));
+
+		memset(cmd->resp, 0, sizeof(cmd->resp));
+		cmd->retries = 0;
+
+		mrq.cmd = cmd;
+		cmd->data = NULL;
+
+		mmc_wait_for_req(host, &mrq);
+
+		err = cmd->error;
+		if (!cmd->error)
+			break;
+
+		/* no point in retrying illegal APP commands */
+		if (mmc_host_is_spi(host)) {
+			if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
+				break;
+		}
+	}
+
+	return err;
+}
+
+EXPORT_SYMBOL(mmc_wait_for_app_cmd);
+
+int mmc_app_set_bus_width(struct mmc_card *card, int width)
+{
+	int err;
+	struct mmc_command cmd = {0};
+
+	BUG_ON(!card);
+	BUG_ON(!card->host);
+
+	cmd.opcode = SD_APP_SET_BUS_WIDTH;
+	cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+	switch (width) {
+	case MMC_BUS_WIDTH_1:
+		cmd.arg = SD_BUS_WIDTH_1;
+		break;
+	case MMC_BUS_WIDTH_4:
+		cmd.arg = SD_BUS_WIDTH_4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	err = mmc_wait_for_app_cmd(card->host, card, &cmd, MMC_CMD_RETRIES);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
+{
+	struct mmc_command cmd = {0};
+	int i, err = 0;
+
+	BUG_ON(!host);
+
+	cmd.opcode = SD_APP_OP_COND;
+	if (mmc_host_is_spi(host))
+		cmd.arg = ocr & (1 << 30); /* SPI only defines one bit */
+	else
+		cmd.arg = ocr;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
+
+	for (i = 100; i; i--) {
+		err = mmc_wait_for_app_cmd(host, NULL, &cmd, MMC_CMD_RETRIES);
+		if (err)
+			break;
+
+		/* if we're just probing, do a single pass */
+		if (ocr == 0)
+			break;
+
+		/* otherwise wait until reset completes */
+		if (mmc_host_is_spi(host)) {
+			if (!(cmd.resp[0] & R1_SPI_IDLE))
+				break;
+		} else {
+			if (cmd.resp[0] & MMC_CARD_BUSY)
+				break;
+		}
+
+		err = -ETIMEDOUT;
+
+		mmc_delay(10);
+	}
+
+	if (!i)
+		pr_err("%s: card never left busy state\n", mmc_hostname(host));
+
+	if (rocr && !mmc_host_is_spi(host))
+		*rocr = cmd.resp[0];
+
+	return err;
+}
+
+int mmc_send_if_cond(struct mmc_host *host, u32 ocr)
+{
+	struct mmc_command cmd = {0};
+	int err;
+	static const u8 test_pattern = 0xAA;
+	u8 result_pattern;
+
+	/*
+	 * To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND
+	 * before SD_APP_OP_COND. This command will harmlessly fail for
+	 * SD 1.0 cards.
+	 */
+	cmd.opcode = SD_SEND_IF_COND;
+	cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern;
+	cmd.flags = MMC_RSP_SPI_R7 | MMC_RSP_R7 | MMC_CMD_BCR;
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (err)
+		return err;
+
+	if (mmc_host_is_spi(host))
+		result_pattern = cmd.resp[1] & 0xFF;
+	else
+		result_pattern = cmd.resp[0] & 0xFF;
+
+	if (result_pattern != test_pattern)
+		return -EIO;
+
+	return 0;
+}
+
+int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca)
+{
+	int err;
+	struct mmc_command cmd = {0};
+
+	BUG_ON(!host);
+	BUG_ON(!rca);
+
+	cmd.opcode = SD_SEND_RELATIVE_ADDR;
+	cmd.arg = 0;
+	cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR;
+
+	err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+	if (err)
+		return err;
+
+	*rca = cmd.resp[0] >> 16;
+
+	return 0;
+}
+
+int mmc_app_send_scr(struct mmc_card *card, u32 *scr)
+{
+	int err;
+	struct mmc_request mrq = {NULL};
+	struct mmc_command cmd = {0};
+	struct mmc_data data = {0};
+	struct scatterlist sg;
+	void *data_buf;
+
+	BUG_ON(!card);
+	BUG_ON(!card->host);
+	BUG_ON(!scr);
+
+	/* NOTE: caller guarantees scr is heap-allocated */
+
+	err = mmc_app_cmd(card->host, card);
+	if (err)
+		return err;
+
+	/* dma onto stack is unsafe/nonportable, but callers to this
+	 * routine normally provide temporary on-stack buffers ...
+	 */
+	data_buf = kmalloc(sizeof(card->raw_scr), GFP_KERNEL);
+	if (data_buf == NULL)
+		return -ENOMEM;
+
+	mrq.cmd = &cmd;
+	mrq.data = &data;
+
+	cmd.opcode = SD_APP_SEND_SCR;
+	cmd.arg = 0;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+	data.blksz = 8;
+	data.blocks = 1;
+	data.flags = MMC_DATA_READ;
+	data.sg = &sg;
+	data.sg_len = 1;
+
+	sg_init_one(&sg, data_buf, 8);
+
+	mmc_set_data_timeout(&data, card);
+
+	mmc_wait_for_req(card->host, &mrq);
+
+	memcpy(scr, data_buf, sizeof(card->raw_scr));
+	kfree(data_buf);
+
+	if (cmd.error)
+		return cmd.error;
+	if (data.error)
+		return data.error;
+
+	scr[0] = be32_to_cpu(scr[0]);
+	scr[1] = be32_to_cpu(scr[1]);
+
+	return 0;
+}
+
+int mmc_sd_switch(struct mmc_card *card, int mode, int group,
+	u8 value, u8 *resp)
+{
+	struct mmc_request mrq = {NULL};
+	struct mmc_command cmd = {0};
+	struct mmc_data data = {0};
+	struct scatterlist sg;
+
+	BUG_ON(!card);
+	BUG_ON(!card->host);
+
+	/* NOTE: caller guarantees resp is heap-allocated */
+
+	mode = !!mode;
+	value &= 0xF;
+
+	mrq.cmd = &cmd;
+	mrq.data = &data;
+
+	cmd.opcode = SD_SWITCH;
+	cmd.arg = mode << 31 | 0x00FFFFFF;
+	cmd.arg &= ~(0xF << (group * 4));
+	cmd.arg |= value << (group * 4);
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+	data.blksz = 64;
+	data.blocks = 1;
+	data.flags = MMC_DATA_READ;
+	data.sg = &sg;
+	data.sg_len = 1;
+
+	sg_init_one(&sg, resp, 64);
+
+	mmc_set_data_timeout(&data, card);
+
+	mmc_wait_for_req(card->host, &mrq);
+
+	if (cmd.error)
+		return cmd.error;
+	if (data.error)
+		return data.error;
+
+	return 0;
+}
+
+int mmc_app_sd_status(struct mmc_card *card, void *ssr)
+{
+	int err;
+	struct mmc_request mrq = {NULL};
+	struct mmc_command cmd = {0};
+	struct mmc_data data = {0};
+	struct scatterlist sg;
+
+	BUG_ON(!card);
+	BUG_ON(!card->host);
+	BUG_ON(!ssr);
+
+	/* NOTE: caller guarantees ssr is heap-allocated */
+
+	err = mmc_app_cmd(card->host, card);
+	if (err)
+		return err;
+
+	mrq.cmd = &cmd;
+	mrq.data = &data;
+
+	cmd.opcode = SD_APP_SD_STATUS;
+	cmd.arg = 0;
+	cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+	data.blksz = 64;
+	data.blocks = 1;
+	data.flags = MMC_DATA_READ;
+	data.sg = &sg;
+	data.sg_len = 1;
+
+	sg_init_one(&sg, ssr, 64);
+
+	mmc_set_data_timeout(&data, card);
+
+	mmc_wait_for_req(card->host, &mrq);
+
+	if (cmd.error)
+		return cmd.error;
+	if (data.error)
+		return data.error;
+
+	return 0;
+}

drivers/mmc/core/sd_ops.h

@@ -0,0 +1,25 @@
+/*
+ *  linux/drivers/mmc/core/sd_ops.h
+ *
+ *  Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef _MMC_SD_OPS_H
+#define _MMC_SD_OPS_H
+
+int mmc_app_set_bus_width(struct mmc_card *card, int width);
+int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
+int mmc_send_if_cond(struct mmc_host *host, u32 ocr);
+int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca);
+int mmc_app_send_scr(struct mmc_card *card, u32 *scr);
+int mmc_sd_switch(struct mmc_card *card, int mode, int group,
+	u8 value, u8 *resp);
+int mmc_app_sd_status(struct mmc_card *card, void *ssr);
+
+#endif
+

drivers/mmc/core/sdio_bus.c

@@ -0,0 +1,351 @@
+/*
+ *  linux/drivers/mmc/core/sdio_bus.c
+ *
+ *  Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * SDIO function driver model
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_domain.h>
+#include <linux/acpi.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "sdio_cis.h"
+#include "sdio_bus.h"
+
+#ifdef CONFIG_MMC_EMBEDDED_SDIO
+#include <linux/mmc/host.h>
+#endif
+
+/* show configuration fields */
+#define sdio_config_attr(field, format_string)				\
+static ssize_t								\
+field##_show(struct device *dev, struct device_attribute *attr, char *buf)				\
+{									\
+	struct sdio_func *func;						\
+									\
+	func = dev_to_sdio_func (dev);					\
+	return sprintf (buf, format_string, func->field);		\
+}									\
+static DEVICE_ATTR_RO(field)
+
+sdio_config_attr(class, "0x%02x\n");
+sdio_config_attr(vendor, "0x%04x\n");
+sdio_config_attr(device, "0x%04x\n");
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sdio_func *func = dev_to_sdio_func (dev);
+
+	return sprintf(buf, "sdio:c%02Xv%04Xd%04X\n",
+			func->class, func->vendor, func->device);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static struct attribute *sdio_dev_attrs[] = {
+	&dev_attr_class.attr,
+	&dev_attr_vendor.attr,
+	&dev_attr_device.attr,
+	&dev_attr_modalias.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(sdio_dev);
+
+static const struct sdio_device_id *sdio_match_one(struct sdio_func *func,
+	const struct sdio_device_id *id)
+{
+	if (id->class != (__u8)SDIO_ANY_ID && id->class != func->class)
+		return NULL;
+	if (id->vendor != (__u16)SDIO_ANY_ID && id->vendor != func->vendor)
+		return NULL;
+	if (id->device != (__u16)SDIO_ANY_ID && id->device != func->device)
+		return NULL;
+	return id;
+}
+
+static const struct sdio_device_id *sdio_match_device(struct sdio_func *func,
+	struct sdio_driver *sdrv)
+{
+	const struct sdio_device_id *ids;
+
+	ids = sdrv->id_table;
+
+	if (ids) {
+		while (ids->class || ids->vendor || ids->device) {
+			if (sdio_match_one(func, ids))
+				return ids;
+			ids++;
+		}
+	}
+
+	return NULL;
+}
+
+static int sdio_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct sdio_driver *sdrv = to_sdio_driver(drv);
+
+	if (sdio_match_device(func, sdrv))
+		return 1;
+
+	return 0;
+}
+
+static int
+sdio_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+
+	if (add_uevent_var(env,
+			"SDIO_CLASS=%02X", func->class))
+		return -ENOMEM;
+
+	if (add_uevent_var(env, 
+			"SDIO_ID=%04X:%04X", func->vendor, func->device))
+		return -ENOMEM;
+
+	if (add_uevent_var(env,
+			"MODALIAS=sdio:c%02Xv%04Xd%04X",
+			func->class, func->vendor, func->device))
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int sdio_bus_probe(struct device *dev)
+{
+	struct sdio_driver *drv = to_sdio_driver(dev->driver);
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	const struct sdio_device_id *id;
+	int ret;
+
+	id = sdio_match_device(func, drv);
+	if (!id)
+		return -ENODEV;
+
+	/* Unbound SDIO functions are always suspended.
+	 * During probe, the function is set active and the usage count
+	 * is incremented.  If the driver supports runtime PM,
+	 * it should call pm_runtime_put_noidle() in its probe routine and
+	 * pm_runtime_get_noresume() in its remove routine.
+	 */
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto disable_runtimepm;
+	}
+
+	/* Set the default block size so the driver is sure it's something
+	 * sensible. */
+	sdio_claim_host(func);
+	ret = sdio_set_block_size(func, 0);
+	sdio_release_host(func);
+	if (ret)
+		goto disable_runtimepm;
+
+	ret = drv->probe(func, id);
+	if (ret)
+		goto disable_runtimepm;
+
+	return 0;
+
+disable_runtimepm:
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
+	return ret;
+}
+
+static int sdio_bus_remove(struct device *dev)
+{
+	struct sdio_driver *drv = to_sdio_driver(dev->driver);
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	int ret = 0;
+
+	/* Make sure card is powered before invoking ->remove() */
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_get_sync(dev);
+
+	drv->remove(func);
+
+	if (func->irq_handler) {
+		pr_warn("WARNING: driver %s did not remove its interrupt handler!\n",
+			drv->name);
+		sdio_claim_host(func);
+		sdio_release_irq(func);
+		sdio_release_host(func);
+	}
+
+	/* First, undo the increment made directly above */
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
+
+	/* Then undo the runtime PM settings in sdio_bus_probe() */
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_sync(dev);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM
+
+static const struct dev_pm_ops sdio_bus_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_generic_suspend, pm_generic_resume)
+	SET_RUNTIME_PM_OPS(
+		pm_generic_runtime_suspend,
+		pm_generic_runtime_resume,
+		NULL
+	)
+};
+
+#define SDIO_PM_OPS_PTR	(&sdio_bus_pm_ops)
+
+#else /* !CONFIG_PM */
+
+#define SDIO_PM_OPS_PTR	NULL
+
+#endif /* !CONFIG_PM */
+
+static struct bus_type sdio_bus_type = {
+	.name		= "sdio",
+	.dev_groups	= sdio_dev_groups,
+	.match		= sdio_bus_match,
+	.uevent		= sdio_bus_uevent,
+	.probe		= sdio_bus_probe,
+	.remove		= sdio_bus_remove,
+	.pm		= SDIO_PM_OPS_PTR,
+};
+
+int sdio_register_bus(void)
+{
+	return bus_register(&sdio_bus_type);
+}
+
+void sdio_unregister_bus(void)
+{
+	bus_unregister(&sdio_bus_type);
+}
+
+/**
+ *	sdio_register_driver - register a function driver
+ *	@drv: SDIO function driver
+ */
+int sdio_register_driver(struct sdio_driver *drv)
+{
+	drv->drv.name = drv->name;
+	drv->drv.bus = &sdio_bus_type;
+	return driver_register(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(sdio_register_driver);
+
+/**
+ *	sdio_unregister_driver - unregister a function driver
+ *	@drv: SDIO function driver
+ */
+void sdio_unregister_driver(struct sdio_driver *drv)
+{
+	drv->drv.bus = &sdio_bus_type;
+	driver_unregister(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(sdio_unregister_driver);
+
+static void sdio_release_func(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+
+#ifdef CONFIG_MMC_EMBEDDED_SDIO
+	/*
+	 * If this device is embedded then we never allocated
+	 * cis tables for this func
+	 */
+	if (!func->card->host->embedded_sdio_data.funcs)
+#endif
+		sdio_free_func_cis(func);
+
+	kfree(func->info);
+
+	kfree(func);
+}
+
+/*
+ * Allocate and initialise a new SDIO function structure.
+ */
+struct sdio_func *sdio_alloc_func(struct mmc_card *card)
+{
+	struct sdio_func *func;
+
+	func = kzalloc(sizeof(struct sdio_func), GFP_KERNEL);
+	if (!func)
+		return ERR_PTR(-ENOMEM);
+
+	func->card = card;
+
+	device_initialize(&func->dev);
+
+	func->dev.parent = &card->dev;
+	func->dev.bus = &sdio_bus_type;
+	func->dev.release = sdio_release_func;
+
+	return func;
+}
+
+#ifdef CONFIG_ACPI
+static void sdio_acpi_set_handle(struct sdio_func *func)
+{
+	struct mmc_host *host = func->card->host;
+	u64 addr = (host->slotno << 16) | func->num;
+
+	acpi_preset_companion(&func->dev, ACPI_COMPANION(host->parent), addr);
+}
+#else
+static inline void sdio_acpi_set_handle(struct sdio_func *func) {}
+#endif
+
+/*
+ * Register a new SDIO function with the driver model.
+ */
+int sdio_add_func(struct sdio_func *func)
+{
+	int ret;
+
+	dev_set_name(&func->dev, "%s:%d", mmc_card_id(func->card), func->num);
+
+	sdio_acpi_set_handle(func);
+	ret = device_add(&func->dev);
+	if (ret == 0) {
+		sdio_func_set_present(func);
+		dev_pm_domain_attach(&func->dev, false);
+	}
+
+	return ret;
+}
+
+/*
+ * Unregister a SDIO function with the driver model, and
+ * (eventually) free it.
+ * This function can be called through error paths where sdio_add_func() was
+ * never executed (because a failure occurred at an earlier point).
+ */
+void sdio_remove_func(struct sdio_func *func)
+{
+	if (!sdio_func_present(func))
+		return;
+
+	dev_pm_domain_detach(&func->dev, false);
+	device_del(&func->dev);
+	put_device(&func->dev);
+}
+

drivers/mmc/core/sdio_bus.h

@@ -0,0 +1,22 @@
+/*
+ *  linux/drivers/mmc/core/sdio_bus.h
+ *
+ *  Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef _MMC_CORE_SDIO_BUS_H
+#define _MMC_CORE_SDIO_BUS_H
+
+struct sdio_func *sdio_alloc_func(struct mmc_card *card);
+int sdio_add_func(struct sdio_func *func);
+void sdio_remove_func(struct sdio_func *func);
+
+int sdio_register_bus(void);
+void sdio_unregister_bus(void);
+
+#endif
+

drivers/mmc/core/sdio_cis.c

@@ -0,0 +1,412 @@
+/*
+ * linux/drivers/mmc/core/sdio_cis.c
+ *
+ * Author:	Nicolas Pitre
+ * Created:	June 11, 2007
+ * Copyright:	MontaVista Software Inc.
+ *
+ * Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "sdio_cis.h"
+#include "sdio_ops.h"
+
+static int cistpl_vers_1(struct mmc_card *card, struct sdio_func *func,
+			 const unsigned char *buf, unsigned size)
+{
+	unsigned i, nr_strings;
+	char **buffer, *string;
+
+	/* Find all null-terminated (including zero length) strings in
+	   the TPLLV1_INFO field. Trailing garbage is ignored. */
+	buf += 2;
+	size -= 2;
+
+	nr_strings = 0;
+	for (i = 0; i < size; i++) {
+		if (buf[i] == 0xff)
+			break;
+		if (buf[i] == 0)
+			nr_strings++;
+	}
+	if (nr_strings == 0)
+		return 0;
+
+	size = i;
+
+	buffer = kzalloc(sizeof(char*) * nr_strings + size, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	string = (char*)(buffer + nr_strings);
+
+	for (i = 0; i < nr_strings; i++) {
+		buffer[i] = string;
+		strcpy(string, buf);
+		string += strlen(string) + 1;
+		buf += strlen(buf) + 1;
+	}
+
+	if (func) {
+		func->num_info = nr_strings;
+		func->info = (const char**)buffer;
+	} else {
+		card->num_info = nr_strings;
+		card->info = (const char**)buffer;
+	}
+
+	return 0;
+}
+
+static int cistpl_manfid(struct mmc_card *card, struct sdio_func *func,
+			 const unsigned char *buf, unsigned size)
+{
+	unsigned int vendor, device;
+
+	/* TPLMID_MANF */
+	vendor = buf[0] | (buf[1] << 8);
+
+	/* TPLMID_CARD */
+	device = buf[2] | (buf[3] << 8);
+
+	if (func) {
+		func->vendor = vendor;
+		func->device = device;
+	} else {
+		card->cis.vendor = vendor;
+		card->cis.device = device;
+	}
+
+	return 0;
+}
+
+static const unsigned char speed_val[16] =
+	{ 0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80 };
+static const unsigned int speed_unit[8] =
+	{ 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 };
+
+
+typedef int (tpl_parse_t)(struct mmc_card *, struct sdio_func *,
+			   const unsigned char *, unsigned);
+
+struct cis_tpl {
+	unsigned char code;
+	unsigned char min_size;
+	tpl_parse_t *parse;
+};
+
+static int cis_tpl_parse(struct mmc_card *card, struct sdio_func *func,
+			 const char *tpl_descr,
+			 const struct cis_tpl *tpl, int tpl_count,
+			 unsigned char code,
+			 const unsigned char *buf, unsigned size)
+{
+	int i, ret;
+
+	/* look for a matching code in the table */
+	for (i = 0; i < tpl_count; i++, tpl++) {
+		if (tpl->code == code)
+			break;
+	}
+	if (i < tpl_count) {
+		if (size >= tpl->min_size) {
+			if (tpl->parse)
+				ret = tpl->parse(card, func, buf, size);
+			else
+				ret = -EILSEQ;	/* known tuple, not parsed */
+		} else {
+			/* invalid tuple */
+			ret = -EINVAL;
+		}
+		if (ret && ret != -EILSEQ && ret != -ENOENT) {
+			pr_err("%s: bad %s tuple 0x%02x (%u bytes)\n",
+			       mmc_hostname(card->host), tpl_descr, code, size);
+		}
+	} else {
+		/* unknown tuple */
+		ret = -ENOENT;
+	}
+
+	return ret;
+}
+
+static int cistpl_funce_common(struct mmc_card *card, struct sdio_func *func,
+			       const unsigned char *buf, unsigned size)
+{
+	/* Only valid for the common CIS (function 0) */
+	if (func)
+		return -EINVAL;
+
+	/* TPLFE_FN0_BLK_SIZE */
+	card->cis.blksize = buf[1] | (buf[2] << 8);
+
+	/* TPLFE_MAX_TRAN_SPEED */
+	card->cis.max_dtr = speed_val[(buf[3] >> 3) & 15] *
+			    speed_unit[buf[3] & 7];
+
+	return 0;
+}
+
+static int cistpl_funce_func(struct mmc_card *card, struct sdio_func *func,
+			     const unsigned char *buf, unsigned size)
+{
+	unsigned vsn;
+	unsigned min_size;
+
+	/* Only valid for the individual function's CIS (1-7) */
+	if (!func)
+		return -EINVAL;
+
+	/*
+	 * This tuple has a different length depending on the SDIO spec
+	 * version.
+	 */
+	vsn = func->card->cccr.sdio_vsn;
+	min_size = (vsn == SDIO_SDIO_REV_1_00) ? 28 : 42;
+
+	if (size < min_size)
+		return -EINVAL;
+
+	/* TPLFE_MAX_BLK_SIZE */
+	func->max_blksize = buf[12] | (buf[13] << 8);
+
+	/* TPLFE_ENABLE_TIMEOUT_VAL, present in ver 1.1 and above */
+	if (vsn > SDIO_SDIO_REV_1_00)
+		func->enable_timeout = (buf[28] | (buf[29] << 8)) * 10;
+	else
+		func->enable_timeout = jiffies_to_msecs(HZ);
+
+	return 0;
+}
+
+/*
+ * Known TPLFE_TYPEs table for CISTPL_FUNCE tuples.
+ *
+ * Note that, unlike PCMCIA, CISTPL_FUNCE tuples are not parsed depending
+ * on the TPLFID_FUNCTION value of the previous CISTPL_FUNCID as on SDIO
+ * TPLFID_FUNCTION is always hardcoded to 0x0C.
+ */
+static const struct cis_tpl cis_tpl_funce_list[] = {
+	{	0x00,	4,	cistpl_funce_common		},
+	{	0x01,	0,	cistpl_funce_func		},
+	{	0x04,	1+1+6,	/* CISTPL_FUNCE_LAN_NODE_ID */	},
+};
+
+static int cistpl_funce(struct mmc_card *card, struct sdio_func *func,
+			const unsigned char *buf, unsigned size)
+{
+	if (size < 1)
+		return -EINVAL;
+
+	return cis_tpl_parse(card, func, "CISTPL_FUNCE",
+			     cis_tpl_funce_list,
+			     ARRAY_SIZE(cis_tpl_funce_list),
+			     buf[0], buf, size);
+}
+
+/* Known TPL_CODEs table for CIS tuples */
+static const struct cis_tpl cis_tpl_list[] = {
+	{	0x15,	3,	cistpl_vers_1		},
+	{	0x20,	4,	cistpl_manfid		},
+	{	0x21,	2,	/* cistpl_funcid */	},
+	{	0x22,	0,	cistpl_funce		},
+};
+
+static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func)
+{
+	int ret;
+	struct sdio_func_tuple *this, **prev;
+	unsigned i, ptr = 0;
+
+	/*
+	 * Note that this works for the common CIS (function number 0) as
+	 * well as a function's CIS * since SDIO_CCCR_CIS and SDIO_FBR_CIS
+	 * have the same offset.
+	 */
+	for (i = 0; i < 3; i++) {
+		unsigned char x, fn;
+
+		if (func)
+			fn = func->num;
+		else
+			fn = 0;
+
+		ret = mmc_io_rw_direct(card, 0, 0,
+			SDIO_FBR_BASE(fn) + SDIO_FBR_CIS + i, 0, &x);
+		if (ret)
+			return ret;
+		ptr |= x << (i * 8);
+	}
+
+	if (func)
+		prev = &func->tuples;
+	else
+		prev = &card->tuples;
+
+	BUG_ON(*prev);
+
+	do {
+		unsigned char tpl_code, tpl_link;
+
+		ret = mmc_io_rw_direct(card, 0, 0, ptr++, 0, &tpl_code);
+		if (ret)
+			break;
+
+		/* 0xff means we're done */
+		if (tpl_code == 0xff)
+			break;
+
+		/* null entries have no link field or data */
+		if (tpl_code == 0x00)
+			continue;
+
+		ret = mmc_io_rw_direct(card, 0, 0, ptr++, 0, &tpl_link);
+		if (ret)
+			break;
+
+		/* a size of 0xff also means we're done */
+		if (tpl_link == 0xff)
+			break;
+
+		this = kmalloc(sizeof(*this) + tpl_link, GFP_KERNEL);
+		if (!this)
+			return -ENOMEM;
+
+		for (i = 0; i < tpl_link; i++) {
+			ret = mmc_io_rw_direct(card, 0, 0,
+					       ptr + i, 0, &this->data[i]);
+			if (ret)
+				break;
+		}
+		if (ret) {
+			kfree(this);
+			break;
+		}
+
+		/* Try to parse the CIS tuple */
+		ret = cis_tpl_parse(card, func, "CIS",
+				    cis_tpl_list, ARRAY_SIZE(cis_tpl_list),
+				    tpl_code, this->data, tpl_link);
+		if (ret == -EILSEQ || ret == -ENOENT) {
+			/*
+			 * The tuple is unknown or known but not parsed.
+			 * Queue the tuple for the function driver.
+			 */
+			this->next = NULL;
+			this->code = tpl_code;
+			this->size = tpl_link;
+			*prev = this;
+			prev = &this->next;
+
+			if (ret == -ENOENT) {
+				/* warn about unknown tuples */
+				pr_warn_ratelimited("%s: queuing unknown"
+				       " CIS tuple 0x%02x (%u bytes)\n",
+				       mmc_hostname(card->host),
+				       tpl_code, tpl_link);
+			}
+
+			/* keep on analyzing tuples */
+			ret = 0;
+		} else {
+			/*
+			 * We don't need the tuple anymore if it was
+			 * successfully parsed by the SDIO core or if it is
+			 * not going to be queued for a driver.
+			 */
+			kfree(this);
+		}
+
+		ptr += tpl_link;
+	} while (!ret);
+
+	/*
+	 * Link in all unknown tuples found in the common CIS so that
+	 * drivers don't have to go digging in two places.
+	 */
+	if (func)
+		*prev = card->tuples;
+
+	return ret;
+}
+
+int sdio_read_common_cis(struct mmc_card *card)
+{
+	return sdio_read_cis(card, NULL);
+}
+
+void sdio_free_common_cis(struct mmc_card *card)
+{
+	struct sdio_func_tuple *tuple, *victim;
+
+	tuple = card->tuples;
+
+	while (tuple) {
+		victim = tuple;
+		tuple = tuple->next;
+		kfree(victim);
+	}
+
+	card->tuples = NULL;
+}
+
+int sdio_read_func_cis(struct sdio_func *func)
+{
+	int ret;
+
+	ret = sdio_read_cis(func->card, func);
+	if (ret)
+		return ret;
+
+	/*
+	 * Since we've linked to tuples in the card structure,
+	 * we must make sure we have a reference to it.
+	 */
+	get_device(&func->card->dev);
+
+	/*
+	 * Vendor/device id is optional for function CIS, so
+	 * copy it from the card structure as needed.
+	 */
+	if (func->vendor == 0) {
+		func->vendor = func->card->cis.vendor;
+		func->device = func->card->cis.device;
+	}
+
+	return 0;
+}
+
+void sdio_free_func_cis(struct sdio_func *func)
+{
+	struct sdio_func_tuple *tuple, *victim;
+
+	tuple = func->tuples;
+
+	while (tuple && tuple != func->card->tuples) {
+		victim = tuple;
+		tuple = tuple->next;
+		kfree(victim);
+	}
+
+	func->tuples = NULL;
+
+	/*
+	 * We have now removed the link to the tuples in the
+	 * card structure, so remove the reference.
+	 */
+	put_device(&func->card->dev);
+}
+

drivers/mmc/core/sdio_cis.h

@@ -0,0 +1,23 @@
+/*
+ * linux/drivers/mmc/core/sdio_cis.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	June 11, 2007
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef _MMC_SDIO_CIS_H
+#define _MMC_SDIO_CIS_H
+
+int sdio_read_common_cis(struct mmc_card *card);
+void sdio_free_common_cis(struct mmc_card *card);
+
+int sdio_read_func_cis(struct sdio_func *func);
+void sdio_free_func_cis(struct sdio_func *func);
+
+#endif

drivers/mmc/core/sdio_io.c

@@ -0,0 +1,755 @@
+/*
+ *  linux/drivers/mmc/core/sdio_io.c
+ *
+ *  Copyright 2007-2008 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/export.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "sdio_ops.h"
+
+/**
+ *	sdio_claim_host - exclusively claim a bus for a certain SDIO function
+ *	@func: SDIO function that will be accessed
+ *
+ *	Claim a bus for a set of operations. The SDIO function given
+ *	is used to figure out which bus is relevant.
+ */
+void sdio_claim_host(struct sdio_func *func)
+{
+	BUG_ON(!func);
+	BUG_ON(!func->card);
+
+	mmc_claim_host(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_claim_host);
+
+/**
+ *	sdio_release_host - release a bus for a certain SDIO function
+ *	@func: SDIO function that was accessed
+ *
+ *	Release a bus, allowing others to claim the bus for their
+ *	operations.
+ */
+void sdio_release_host(struct sdio_func *func)
+{
+	BUG_ON(!func);
+	BUG_ON(!func->card);
+
+	mmc_release_host(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_release_host);
+
+/**
+ *	sdio_enable_func - enables a SDIO function for usage
+ *	@func: SDIO function to enable
+ *
+ *	Powers up and activates a SDIO function so that register
+ *	access is possible.
+ */
+int sdio_enable_func(struct sdio_func *func)
+{
+	int ret;
+	unsigned char reg;
+	unsigned long timeout;
+
+	BUG_ON(!func);
+	BUG_ON(!func->card);
+
+	pr_debug("SDIO: Enabling device %s...\n", sdio_func_id(func));
+
+	ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, &reg);
+	if (ret)
+		goto err;
+
+	reg |= 1 << func->num;
+
+	ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IOEx, reg, NULL);
+	if (ret)
+		goto err;
+
+	timeout = jiffies + msecs_to_jiffies(func->enable_timeout);
+
+	while (1) {
+		ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IORx, 0, &reg);
+		if (ret)
+			goto err;
+		if (reg & (1 << func->num))
+			break;
+		ret = -ETIME;
+		if (time_after(jiffies, timeout))
+			goto err;
+	}
+
+	pr_debug("SDIO: Enabled device %s\n", sdio_func_id(func));
+
+	return 0;
+
+err:
+	pr_debug("SDIO: Failed to enable device %s\n", sdio_func_id(func));
+	return ret;
+}
+EXPORT_SYMBOL_GPL(sdio_enable_func);
+
+/**
+ *	sdio_disable_func - disable a SDIO function
+ *	@func: SDIO function to disable
+ *
+ *	Powers down and deactivates a SDIO function. Register access
+ *	to this function will fail until the function is reenabled.
+ */
+int sdio_disable_func(struct sdio_func *func)
+{
+	int ret;
+	unsigned char reg;
+
+	BUG_ON(!func);
+	BUG_ON(!func->card);
+
+	pr_debug("SDIO: Disabling device %s...\n", sdio_func_id(func));
+
+	ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, &reg);
+	if (ret)
+		goto err;
+
+	reg &= ~(1 << func->num);
+
+	ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IOEx, reg, NULL);
+	if (ret)
+		goto err;
+
+	pr_debug("SDIO: Disabled device %s\n", sdio_func_id(func));
+
+	return 0;
+
+err:
+	pr_debug("SDIO: Failed to disable device %s\n", sdio_func_id(func));
+	return -EIO;
+}
+EXPORT_SYMBOL_GPL(sdio_disable_func);
+
+/**
+ *	sdio_set_block_size - set the block size of an SDIO function
+ *	@func: SDIO function to change
+ *	@blksz: new block size or 0 to use the default.
+ *
+ *	The default block size is the largest supported by both the function
+ *	and the host, with a maximum of 512 to ensure that arbitrarily sized
+ *	data transfer use the optimal (least) number of commands.
+ *
+ *	A driver may call this to override the default block size set by the
+ *	core. This can be used to set a block size greater than the maximum
+ *	that reported by the card; it is the driver's responsibility to ensure
+ *	it uses a value that the card supports.
+ *
+ *	Returns 0 on success, -EINVAL if the host does not support the
+ *	requested block size, or -EIO (etc.) if one of the resultant FBR block
+ *	size register writes failed.
+ *
+ */
+int sdio_set_block_size(struct sdio_func *func, unsigned blksz)
+{
+	int ret;
+
+	if (blksz > func->card->host->max_blk_size)
+		return -EINVAL;
+
+	if (blksz == 0) {
+		blksz = min(func->max_blksize, func->card->host->max_blk_size);
+		blksz = min(blksz, 512u);
+	}
+
+	ret = mmc_io_rw_direct(func->card, 1, 0,
+		SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE,
+		blksz & 0xff, NULL);
+	if (ret)
+		return ret;
+	ret = mmc_io_rw_direct(func->card, 1, 0,
+		SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE + 1,
+		(blksz >> 8) & 0xff, NULL);
+	if (ret)
+		return ret;
+	func->cur_blksize = blksz;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sdio_set_block_size);
+
+/*
+ * Calculate the maximum byte mode transfer size
+ */
+static inline unsigned int sdio_max_byte_size(struct sdio_func *func)
+{
+	unsigned mval =	func->card->host->max_blk_size;
+
+	if (mmc_blksz_for_byte_mode(func->card))
+		mval = min(mval, func->cur_blksize);
+	else
+		mval = min(mval, func->max_blksize);
+
+	if (mmc_card_broken_byte_mode_512(func->card))
+		return min(mval, 511u);
+
+	return min(mval, 512u); /* maximum size for byte mode */
+}
+
+/**
+ *	sdio_align_size - pads a transfer size to a more optimal value
+ *	@func: SDIO function
+ *	@sz: original transfer size
+ *
+ *	Pads the original data size with a number of extra bytes in
+ *	order to avoid controller bugs and/or performance hits
+ *	(e.g. some controllers revert to PIO for certain sizes).
+ *
+ *	If possible, it will also adjust the size so that it can be
+ *	handled in just a single request.
+ *
+ *	Returns the improved size, which might be unmodified.
+ */
+unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz)
+{
+	unsigned int orig_sz;
+	unsigned int blk_sz, byte_sz;
+	unsigned chunk_sz;
+
+	orig_sz = sz;
+
+	/*
+	 * Do a first check with the controller, in case it
+	 * wants to increase the size up to a point where it
+	 * might need more than one block.
+	 */
+	sz = mmc_align_data_size(func->card, sz);
+
+	/*
+	 * If we can still do this with just a byte transfer, then
+	 * we're done.
+	 */
+	if (sz <= sdio_max_byte_size(func))
+		return sz;
+
+	if (func->card->cccr.multi_block) {
+		/*
+		 * Check if the transfer is already block aligned
+		 */
+		if ((sz % func->cur_blksize) == 0)
+			return sz;
+
+		/*
+		 * Realign it so that it can be done with one request,
+		 * and recheck if the controller still likes it.
+		 */
+		blk_sz = ((sz + func->cur_blksize - 1) /
+			func->cur_blksize) * func->cur_blksize;
+		blk_sz = mmc_align_data_size(func->card, blk_sz);
+
+		/*
+		 * This value is only good if it is still just
+		 * one request.
+		 */
+		if ((blk_sz % func->cur_blksize) == 0)
+			return blk_sz;
+
+		/*
+		 * We failed to do one request, but at least try to
+		 * pad the remainder properly.
+		 */
+		byte_sz = mmc_align_data_size(func->card,
+				sz % func->cur_blksize);
+		if (byte_sz <= sdio_max_byte_size(func)) {
+			blk_sz = sz / func->cur_blksize;
+			return blk_sz * func->cur_blksize + byte_sz;
+		}
+	} else {
+		/*
+		 * We need multiple requests, so first check that the
+		 * controller can handle the chunk size;
+		 */
+		chunk_sz = mmc_align_data_size(func->card,
+				sdio_max_byte_size(func));
+		if (chunk_sz == sdio_max_byte_size(func)) {
+			/*
+			 * Fix up the size of the remainder (if any)
+			 */
+			byte_sz = orig_sz % chunk_sz;
+			if (byte_sz) {
+				byte_sz = mmc_align_data_size(func->card,
+						byte_sz);
+			}
+
+			return (orig_sz / chunk_sz) * chunk_sz + byte_sz;
+		}
+	}
+
+	/*
+	 * The controller is simply incapable of transferring the size
+	 * we want in decent manner, so just return the original size.
+	 */
+	return orig_sz;
+}
+EXPORT_SYMBOL_GPL(sdio_align_size);
+
+/* Split an arbitrarily sized data transfer into several
+ * IO_RW_EXTENDED commands. */
+static int sdio_io_rw_ext_helper(struct sdio_func *func, int write,
+	unsigned addr, int incr_addr, u8 *buf, unsigned size)
+{
+	unsigned remainder = size;
+	unsigned max_blocks;
+	int ret;
+
+	/* Do the bulk of the transfer using block mode (if supported). */
+	if (func->card->cccr.multi_block && (size > sdio_max_byte_size(func))) {
+		/* Blocks per command is limited by host count, host transfer
+		 * size and the maximum for IO_RW_EXTENDED of 511 blocks. */
+		max_blocks = min(func->card->host->max_blk_count, 511u);
+
+		while (remainder >= func->cur_blksize) {
+			unsigned blocks;
+
+			blocks = remainder / func->cur_blksize;
+			if (blocks > max_blocks)
+				blocks = max_blocks;
+			size = blocks * func->cur_blksize;
+
+			ret = mmc_io_rw_extended(func->card, write,
+				func->num, addr, incr_addr, buf,
+				blocks, func->cur_blksize);
+			if (ret)
+				return ret;
+
+			remainder -= size;
+			buf += size;
+			if (incr_addr)
+				addr += size;
+		}
+	}
+
+	/* Write the remainder using byte mode. */
+	while (remainder > 0) {
+		size = min(remainder, sdio_max_byte_size(func));
+
+		/* Indicate byte mode by setting "blocks" = 0 */
+		ret = mmc_io_rw_extended(func->card, write, func->num, addr,
+			 incr_addr, buf, 0, size);
+		if (ret)
+			return ret;
+
+		remainder -= size;
+		buf += size;
+		if (incr_addr)
+			addr += size;
+	}
+	return 0;
+}
+
+/**
+ *	sdio_readb - read a single byte from a SDIO function
+ *	@func: SDIO function to access
+ *	@addr: address to read
+ *	@err_ret: optional status value from transfer
+ *
+ *	Reads a single byte from the address space of a given SDIO
+ *	function. If there is a problem reading the address, 0xff
+ *	is returned and @err_ret will contain the error code.
+ */
+u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret)
+{
+	int ret;
+	u8 val;
+
+	BUG_ON(!func);
+
+	if (err_ret)
+		*err_ret = 0;
+
+	ret = mmc_io_rw_direct(func->card, 0, func->num, addr, 0, &val);
+	if (ret) {
+		if (err_ret)
+			*err_ret = ret;
+		return 0xFF;
+	}
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(sdio_readb);
+
+/**
+ *	sdio_readb_ext - read a single byte from a SDIO function
+ *	@func: SDIO function to access
+ *	@addr: address to read
+ *	@err_ret: optional status value from transfer
+ *	@in: value to add to argument
+ *
+ *	Reads a single byte from the address space of a given SDIO
+ *	function. If there is a problem reading the address, 0xff
+ *	is returned and @err_ret will contain the error code.
+ */
+unsigned char sdio_readb_ext(struct sdio_func *func, unsigned int addr,
+	int *err_ret, unsigned in)
+{
+	int ret;
+	unsigned char val;
+
+	BUG_ON(!func);
+
+	if (err_ret)
+		*err_ret = 0;
+
+	ret = mmc_io_rw_direct(func->card, 0, func->num, addr, (u8)in, &val);
+	if (ret) {
+		if (err_ret)
+			*err_ret = ret;
+		return 0xFF;
+	}
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(sdio_readb_ext);
+
+/**
+ *	sdio_writeb - write a single byte to a SDIO function
+ *	@func: SDIO function to access
+ *	@b: byte to write
+ *	@addr: address to write to
+ *	@err_ret: optional status value from transfer
+ *
+ *	Writes a single byte to the address space of a given SDIO
+ *	function. @err_ret will contain the status of the actual
+ *	transfer.
+ */
+void sdio_writeb(struct sdio_func *func, u8 b, unsigned int addr, int *err_ret)
+{
+	int ret;
+
+	BUG_ON(!func);
+
+	ret = mmc_io_rw_direct(func->card, 1, func->num, addr, b, NULL);
+	if (err_ret)
+		*err_ret = ret;
+}
+EXPORT_SYMBOL_GPL(sdio_writeb);
+
+/**
+ *	sdio_writeb_readb - write and read a byte from SDIO function
+ *	@func: SDIO function to access
+ *	@write_byte: byte to write
+ *	@addr: address to write to
+ *	@err_ret: optional status value from transfer
+ *
+ *	Performs a RAW (Read after Write) operation as defined by SDIO spec -
+ *	single byte is written to address space of a given SDIO function and
+ *	response is read back from the same address, both using single request.
+ *	If there is a problem with the operation, 0xff is returned and
+ *	@err_ret will contain the error code.
+ */
+u8 sdio_writeb_readb(struct sdio_func *func, u8 write_byte,
+	unsigned int addr, int *err_ret)
+{
+	int ret;
+	u8 val;
+
+	ret = mmc_io_rw_direct(func->card, 1, func->num, addr,
+			write_byte, &val);
+	if (err_ret)
+		*err_ret = ret;
+	if (ret)
+		val = 0xff;
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(sdio_writeb_readb);
+
+/**
+ *	sdio_memcpy_fromio - read a chunk of memory from a SDIO function
+ *	@func: SDIO function to access
+ *	@dst: buffer to store the data
+ *	@addr: address to begin reading from
+ *	@count: number of bytes to read
+ *
+ *	Reads from the address space of a given SDIO function. Return
+ *	value indicates if the transfer succeeded or not.
+ */
+int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
+	unsigned int addr, int count)
+{
+	return sdio_io_rw_ext_helper(func, 0, addr, 1, dst, count);
+}
+EXPORT_SYMBOL_GPL(sdio_memcpy_fromio);
+
+/**
+ *	sdio_memcpy_toio - write a chunk of memory to a SDIO function
+ *	@func: SDIO function to access
+ *	@addr: address to start writing to
+ *	@src: buffer that contains the data to write
+ *	@count: number of bytes to write
+ *
+ *	Writes to the address space of a given SDIO function. Return
+ *	value indicates if the transfer succeeded or not.
+ */
+int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
+	void *src, int count)
+{
+	return sdio_io_rw_ext_helper(func, 1, addr, 1, src, count);
+}
+EXPORT_SYMBOL_GPL(sdio_memcpy_toio);
+
+/**
+ *	sdio_readsb - read from a FIFO on a SDIO function
+ *	@func: SDIO function to access
+ *	@dst: buffer to store the data
+ *	@addr: address of (single byte) FIFO
+ *	@count: number of bytes to read
+ *
+ *	Reads from the specified FIFO of a given SDIO function. Return
+ *	value indicates if the transfer succeeded or not.
+ */
+int sdio_readsb(struct sdio_func *func, void *dst, unsigned int addr,
+	int count)
+{
+	return sdio_io_rw_ext_helper(func, 0, addr, 0, dst, count);
+}
+EXPORT_SYMBOL_GPL(sdio_readsb);
+
+/**
+ *	sdio_writesb - write to a FIFO of a SDIO function
+ *	@func: SDIO function to access
+ *	@addr: address of (single byte) FIFO
+ *	@src: buffer that contains the data to write
+ *	@count: number of bytes to write
+ *
+ *	Writes to the specified FIFO of a given SDIO function. Return
+ *	value indicates if the transfer succeeded or not.
+ */
+int sdio_writesb(struct sdio_func *func, unsigned int addr, void *src,
+	int count)
+{
+	return sdio_io_rw_ext_helper(func, 1, addr, 0, src, count);
+}
+EXPORT_SYMBOL_GPL(sdio_writesb);
+
+/**
+ *	sdio_readw - read a 16 bit integer from a SDIO function
+ *	@func: SDIO function to access
+ *	@addr: address to read
+ *	@err_ret: optional status value from transfer
+ *
+ *	Reads a 16 bit integer from the address space of a given SDIO
+ *	function. If there is a problem reading the address, 0xffff
+ *	is returned and @err_ret will contain the error code.
+ */
+u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret)
+{
+	int ret;
+
+	if (err_ret)
+		*err_ret = 0;
+
+	ret = sdio_memcpy_fromio(func, func->tmpbuf, addr, 2);
+	if (ret) {
+		if (err_ret)
+			*err_ret = ret;
+		return 0xFFFF;
+	}
+
+	return le16_to_cpup((__le16 *)func->tmpbuf);
+}
+EXPORT_SYMBOL_GPL(sdio_readw);
+
+/**
+ *	sdio_writew - write a 16 bit integer to a SDIO function
+ *	@func: SDIO function to access
+ *	@b: integer to write
+ *	@addr: address to write to
+ *	@err_ret: optional status value from transfer
+ *
+ *	Writes a 16 bit integer to the address space of a given SDIO
+ *	function. @err_ret will contain the status of the actual
+ *	transfer.
+ */
+void sdio_writew(struct sdio_func *func, u16 b, unsigned int addr, int *err_ret)
+{
+	int ret;
+
+	*(__le16 *)func->tmpbuf = cpu_to_le16(b);
+
+	ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 2);
+	if (err_ret)
+		*err_ret = ret;
+}
+EXPORT_SYMBOL_GPL(sdio_writew);
+
+/**
+ *	sdio_readl - read a 32 bit integer from a SDIO function
+ *	@func: SDIO function to access
+ *	@addr: address to read
+ *	@err_ret: optional status value from transfer
+ *
+ *	Reads a 32 bit integer from the address space of a given SDIO
+ *	function. If there is a problem reading the address,
+ *	0xffffffff is returned and @err_ret will contain the error
+ *	code.
+ */
+u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret)
+{
+	int ret;
+
+	if (err_ret)
+		*err_ret = 0;
+
+	ret = sdio_memcpy_fromio(func, func->tmpbuf, addr, 4);
+	if (ret) {
+		if (err_ret)
+			*err_ret = ret;
+		return 0xFFFFFFFF;
+	}
+
+	return le32_to_cpup((__le32 *)func->tmpbuf);
+}
+EXPORT_SYMBOL_GPL(sdio_readl);
+
+/**
+ *	sdio_writel - write a 32 bit integer to a SDIO function
+ *	@func: SDIO function to access
+ *	@b: integer to write
+ *	@addr: address to write to
+ *	@err_ret: optional status value from transfer
+ *
+ *	Writes a 32 bit integer to the address space of a given SDIO
+ *	function. @err_ret will contain the status of the actual
+ *	transfer.
+ */
+void sdio_writel(struct sdio_func *func, u32 b, unsigned int addr, int *err_ret)
+{
+	int ret;
+
+	*(__le32 *)func->tmpbuf = cpu_to_le32(b);
+
+	ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 4);
+	if (err_ret)
+		*err_ret = ret;
+}
+EXPORT_SYMBOL_GPL(sdio_writel);
+
+/**
+ *	sdio_f0_readb - read a single byte from SDIO function 0
+ *	@func: an SDIO function of the card
+ *	@addr: address to read
+ *	@err_ret: optional status value from transfer
+ *
+ *	Reads a single byte from the address space of SDIO function 0.
+ *	If there is a problem reading the address, 0xff is returned
+ *	and @err_ret will contain the error code.
+ */
+unsigned char sdio_f0_readb(struct sdio_func *func, unsigned int addr,
+	int *err_ret)
+{
+	int ret;
+	unsigned char val;
+
+	BUG_ON(!func);
+
+	if (err_ret)
+		*err_ret = 0;
+
+	ret = mmc_io_rw_direct(func->card, 0, 0, addr, 0, &val);
+	if (ret) {
+		if (err_ret)
+			*err_ret = ret;
+		return 0xFF;
+	}
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(sdio_f0_readb);
+
+/**
+ *	sdio_f0_writeb - write a single byte to SDIO function 0
+ *	@func: an SDIO function of the card
+ *	@b: byte to write
+ *	@addr: address to write to
+ *	@err_ret: optional status value from transfer
+ *
+ *	Writes a single byte to the address space of SDIO function 0.
+ *	@err_ret will contain the status of the actual transfer.
+ *
+ *	Only writes to the vendor specific CCCR registers (0xF0 -
+ *	0xFF) are permiited; @err_ret will be set to -EINVAL for *
+ *	writes outside this range.
+ */
+void sdio_f0_writeb(struct sdio_func *func, unsigned char b, unsigned int addr,
+	int *err_ret)
+{
+	int ret;
+
+	BUG_ON(!func);
+
+	if ((addr < 0xF0 || addr > 0xFF) && (!mmc_card_lenient_fn0(func->card))) {
+		if (err_ret)
+			*err_ret = -EINVAL;
+		return;
+	}
+
+	ret = mmc_io_rw_direct(func->card, 1, 0, addr, b, NULL);
+	if (err_ret)
+		*err_ret = ret;
+}
+EXPORT_SYMBOL_GPL(sdio_f0_writeb);
+
+/**
+ *	sdio_get_host_pm_caps - get host power management capabilities
+ *	@func: SDIO function attached to host
+ *
+ *	Returns a capability bitmask corresponding to power management
+ *	features supported by the host controller that the card function
+ *	might rely upon during a system suspend.  The host doesn't need
+ *	to be claimed, nor the function active, for this information to be
+ *	obtained.
+ */
+mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func)
+{
+	BUG_ON(!func);
+	BUG_ON(!func->card);
+
+	return func->card->host->pm_caps;
+}
+EXPORT_SYMBOL_GPL(sdio_get_host_pm_caps);
+
+/**
+ *	sdio_set_host_pm_flags - set wanted host power management capabilities
+ *	@func: SDIO function attached to host
+ *
+ *	Set a capability bitmask corresponding to wanted host controller
+ *	power management features for the upcoming suspend state.
+ *	This must be called, if needed, each time the suspend method of
+ *	the function driver is called, and must contain only bits that
+ *	were returned by sdio_get_host_pm_caps().
+ *	The host doesn't need to be claimed, nor the function active,
+ *	for this information to be set.
+ */
+int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags)
+{
+	struct mmc_host *host;
+
+	BUG_ON(!func);
+	BUG_ON(!func->card);
+
+	host = func->card->host;
+
+	if (flags & ~host->pm_caps)
+		return -EINVAL;
+
+	/* function suspend methods are serialized, hence no lock needed */
+	host->pm_flags |= flags;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sdio_set_host_pm_flags);

drivers/mmc/core/sdio_irq.c

@@ -0,0 +1,345 @@
+/*
+ * linux/drivers/mmc/core/sdio_irq.c
+ *
+ * Author:      Nicolas Pitre
+ * Created:     June 18, 2007
+ * Copyright:   MontaVista Software Inc.
+ *
+ * Copyright 2008 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/kthread.h>
+#include <linux/export.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+
+#include <linux/mmc/core.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "sdio_ops.h"
+
+static int process_sdio_pending_irqs(struct mmc_host *host)
+{
+	struct mmc_card *card = host->card;
+	int i, ret, count;
+	unsigned char pending;
+	struct sdio_func *func;
+
+	/*
+	 * Optimization, if there is only 1 function interrupt registered
+	 * and we know an IRQ was signaled then call irq handler directly.
+	 * Otherwise do the full probe.
+	 */
+	func = card->sdio_single_irq;
+	if (func && host->sdio_irq_pending) {
+		func->irq_handler(func);
+		return 1;
+	}
+
+	ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending);
+	if (ret) {
+		pr_debug("%s: error %d reading SDIO_CCCR_INTx\n",
+		       mmc_card_id(card), ret);
+		return ret;
+	}
+
+	if (pending && mmc_card_broken_irq_polling(card) &&
+	    !(host->caps & MMC_CAP_SDIO_IRQ)) {
+		unsigned char dummy;
+
+		/* A fake interrupt could be created when we poll SDIO_CCCR_INTx
+		 * register with a Marvell SD8797 card. A dummy CMD52 read to
+		 * function 0 register 0xff can avoid this.
+		 */
+		mmc_io_rw_direct(card, 0, 0, 0xff, 0, &dummy);
+	}
+
+	count = 0;
+	for (i = 1; i <= 7; i++) {
+		if (pending & (1 << i)) {
+			func = card->sdio_func[i - 1];
+			if (!func) {
+				pr_warn("%s: pending IRQ for non-existent function\n",
+					mmc_card_id(card));
+				ret = -EINVAL;
+			} else if (func->irq_handler) {
+				func->irq_handler(func);
+				count++;
+			} else {
+				pr_warn("%s: pending IRQ with no handler\n",
+					sdio_func_id(func));
+				ret = -EINVAL;
+			}
+		}
+	}
+
+	if (count)
+		return count;
+
+	return ret;
+}
+
+void sdio_run_irqs(struct mmc_host *host)
+{
+	mmc_claim_host(host);
+	host->sdio_irq_pending = true;
+	process_sdio_pending_irqs(host);
+	mmc_release_host(host);
+}
+EXPORT_SYMBOL_GPL(sdio_run_irqs);
+
+static int sdio_irq_thread(void *_host)
+{
+	struct mmc_host *host = _host;
+	struct sched_param param = { .sched_priority = 1 };
+	unsigned long period, idle_period;
+	int ret;
+
+	sched_setscheduler(current, SCHED_FIFO, &param);
+
+	/*
+	 * We want to allow for SDIO cards to work even on non SDIO
+	 * aware hosts.  One thing that non SDIO host cannot do is
+	 * asynchronous notification of pending SDIO card interrupts
+	 * hence we poll for them in that case.
+	 */
+	idle_period = msecs_to_jiffies(10);
+	period = (host->caps & MMC_CAP_SDIO_IRQ) ?
+		MAX_SCHEDULE_TIMEOUT : idle_period;
+
+	pr_debug("%s: IRQ thread started (poll period = %lu jiffies)\n",
+		 mmc_hostname(host), period);
+
+	do {
+		/*
+		 * We claim the host here on drivers behalf for a couple
+		 * reasons:
+		 *
+		 * 1) it is already needed to retrieve the CCCR_INTx;
+		 * 2) we want the driver(s) to clear the IRQ condition ASAP;
+		 * 3) we need to control the abort condition locally.
+		 *
+		 * Just like traditional hard IRQ handlers, we expect SDIO
+		 * IRQ handlers to be quick and to the point, so that the
+		 * holding of the host lock does not cover too much work
+		 * that doesn't require that lock to be held.
+		 */
+		ret = __mmc_claim_host(host, &host->sdio_irq_thread_abort);
+		if (ret)
+			break;
+		ret = process_sdio_pending_irqs(host);
+		host->sdio_irq_pending = false;
+		mmc_release_host(host);
+
+		/*
+		 * Give other threads a chance to run in the presence of
+		 * errors.
+		 */
+		if (ret < 0) {
+			set_current_state(TASK_INTERRUPTIBLE);
+			if (!kthread_should_stop())
+				schedule_timeout(HZ);
+			set_current_state(TASK_RUNNING);
+		}
+
+		/*
+		 * Adaptive polling frequency based on the assumption
+		 * that an interrupt will be closely followed by more.
+		 * This has a substantial benefit for network devices.
+		 */
+		if (!(host->caps & MMC_CAP_SDIO_IRQ)) {
+			if (ret > 0)
+				period /= 2;
+			else {
+				period++;
+				if (period > idle_period)
+					period = idle_period;
+			}
+		}
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (host->caps & MMC_CAP_SDIO_IRQ) {
+			mmc_host_clk_hold(host);
+			host->ops->enable_sdio_irq(host, 1);
+			mmc_host_clk_release(host);
+		}
+		if (!kthread_should_stop())
+			schedule_timeout(period);
+		set_current_state(TASK_RUNNING);
+	} while (!kthread_should_stop());
+
+	if (host->caps & MMC_CAP_SDIO_IRQ) {
+		mmc_host_clk_hold(host);
+		host->ops->enable_sdio_irq(host, 0);
+		mmc_host_clk_release(host);
+	}
+
+	pr_debug("%s: IRQ thread exiting with code %d\n",
+		 mmc_hostname(host), ret);
+
+	return ret;
+}
+
+static int sdio_card_irq_get(struct mmc_card *card)
+{
+	struct mmc_host *host = card->host;
+
+	WARN_ON(!host->claimed);
+
+	if (!host->sdio_irqs++) {
+		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
+			atomic_set(&host->sdio_irq_thread_abort, 0);
+			host->sdio_irq_thread =
+				kthread_run(sdio_irq_thread, host,
+					    "ksdioirqd/%s", mmc_hostname(host));
+			if (IS_ERR(host->sdio_irq_thread)) {
+				int err = PTR_ERR(host->sdio_irq_thread);
+				host->sdio_irqs--;
+				return err;
+			}
+		} else if (host->caps & MMC_CAP_SDIO_IRQ) {
+			mmc_host_clk_hold(host);
+			host->ops->enable_sdio_irq(host, 1);
+			mmc_host_clk_release(host);
+		}
+	}
+
+	return 0;
+}
+
+static int sdio_card_irq_put(struct mmc_card *card)
+{
+	struct mmc_host *host = card->host;
+
+	WARN_ON(!host->claimed);
+	BUG_ON(host->sdio_irqs < 1);
+
+	if (!--host->sdio_irqs) {
+		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
+			atomic_set(&host->sdio_irq_thread_abort, 1);
+			kthread_stop(host->sdio_irq_thread);
+		} else if (host->caps & MMC_CAP_SDIO_IRQ) {
+			mmc_host_clk_hold(host);
+			host->ops->enable_sdio_irq(host, 0);
+			mmc_host_clk_release(host);
+		}
+	}
+
+	return 0;
+}
+
+/* If there is only 1 function registered set sdio_single_irq */
+static void sdio_single_irq_set(struct mmc_card *card)
+{
+	struct sdio_func *func;
+	int i;
+
+	card->sdio_single_irq = NULL;
+	if ((card->host->caps & MMC_CAP_SDIO_IRQ) &&
+	    card->host->sdio_irqs == 1)
+		for (i = 0; i < card->sdio_funcs; i++) {
+		       func = card->sdio_func[i];
+		       if (func && func->irq_handler) {
+			       card->sdio_single_irq = func;
+			       break;
+		       }
+	       }
+}
+
+/**
+ *	sdio_claim_irq - claim the IRQ for a SDIO function
+ *	@func: SDIO function
+ *	@handler: IRQ handler callback
+ *
+ *	Claim and activate the IRQ for the given SDIO function. The provided
+ *	handler will be called when that IRQ is asserted.  The host is always
+ *	claimed already when the handler is called so the handler must not
+ *	call sdio_claim_host() nor sdio_release_host().
+ */
+int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler)
+{
+	int ret;
+	unsigned char reg;
+
+	BUG_ON(!func);
+	BUG_ON(!func->card);
+
+	pr_debug("SDIO: Enabling IRQ for %s...\n", sdio_func_id(func));
+
+	if (func->irq_handler) {
+		pr_debug("SDIO: IRQ for %s already in use.\n", sdio_func_id(func));
+		return -EBUSY;
+	}
+
+	ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, &reg);
+	if (ret)
+		return ret;
+
+	reg |= 1 << func->num;
+
+	reg |= 1; /* Master interrupt enable */
+
+	ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL);
+	if (ret)
+		return ret;
+
+	func->irq_handler = handler;
+	ret = sdio_card_irq_get(func->card);
+	if (ret)
+		func->irq_handler = NULL;
+	sdio_single_irq_set(func->card);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(sdio_claim_irq);
+
+/**
+ *	sdio_release_irq - release the IRQ for a SDIO function
+ *	@func: SDIO function
+ *
+ *	Disable and release the IRQ for the given SDIO function.
+ */
+int sdio_release_irq(struct sdio_func *func)
+{
+	int ret;
+	unsigned char reg;
+
+	BUG_ON(!func);
+	BUG_ON(!func->card);
+
+	pr_debug("SDIO: Disabling IRQ for %s...\n", sdio_func_id(func));
+
+	if (func->irq_handler) {
+		func->irq_handler = NULL;
+		sdio_card_irq_put(func->card);
+		sdio_single_irq_set(func->card);
+	}
+
+	ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, &reg);
+	if (ret)
+		return ret;
+
+	reg &= ~(1 << func->num);
+
+	/* Disable master interrupt with the last function interrupt */
+	if (!(reg & 0xFE))
+		reg = 0;
+
+	ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sdio_release_irq);
+

drivers/mmc/core/sdio_ops.c

@@ -0,0 +1,223 @@
+/*
+ *  linux/drivers/mmc/sdio_ops.c
+ *
+ *  Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/scatterlist.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+
+#include "core.h"
+#include "sdio_ops.h"
+
+int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
+{
+	struct mmc_command cmd = {0};
+	int i, err = 0;
+
+	BUG_ON(!host);
+
+	cmd.opcode = SD_IO_SEND_OP_COND;
+	cmd.arg = ocr;
+	cmd.flags = MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR;
+
+	for (i = 100; i; i--) {
+		err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+		if (err)
+			break;
+
+		/* if we're just probing, do a single pass */
+		if (ocr == 0)
+			break;
+
+		/* otherwise wait until reset completes */
+		if (mmc_host_is_spi(host)) {
+			/*
+			 * Both R1_SPI_IDLE and MMC_CARD_BUSY indicate
+			 * an initialized card under SPI, but some cards
+			 * (Marvell's) only behave when looking at this
+			 * one.
+			 */
+			if (cmd.resp[1] & MMC_CARD_BUSY)
+				break;
+		} else {
+			if (cmd.resp[0] & MMC_CARD_BUSY)
+				break;
+		}
+
+		err = -ETIMEDOUT;
+
+		mmc_delay(10);
+	}
+
+	if (rocr)
+		*rocr = cmd.resp[mmc_host_is_spi(host) ? 1 : 0];
+
+	return err;
+}
+
+static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn,
+	unsigned addr, u8 in, u8 *out)
+{
+	struct mmc_command cmd = {0};
+	int err;
+
+	BUG_ON(!host);
+	BUG_ON(fn > 7);
+
+	/* sanity check */
+	if (addr & ~0x1FFFF)
+		return -EINVAL;
+
+	cmd.opcode = SD_IO_RW_DIRECT;
+	cmd.arg = write ? 0x80000000 : 0x00000000;
+	cmd.arg |= fn << 28;
+	cmd.arg |= (write && out) ? 0x08000000 : 0x00000000;
+	cmd.arg |= addr << 9;
+	cmd.arg |= in;
+	cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (err)
+		return err;
+
+	if (mmc_host_is_spi(host)) {
+		/* host driver already reported errors */
+	} else {
+		if (cmd.resp[0] & R5_ERROR)
+			return -EIO;
+		if (cmd.resp[0] & R5_FUNCTION_NUMBER)
+			return -EINVAL;
+		if (cmd.resp[0] & R5_OUT_OF_RANGE)
+			return -ERANGE;
+	}
+
+	if (out) {
+		if (mmc_host_is_spi(host))
+			*out = (cmd.resp[0] >> 8) & 0xFF;
+		else
+			*out = cmd.resp[0] & 0xFF;
+	}
+
+	return 0;
+}
+
+int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
+	unsigned addr, u8 in, u8 *out)
+{
+	BUG_ON(!card);
+	return mmc_io_rw_direct_host(card->host, write, fn, addr, in, out);
+}
+
+int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
+	unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
+{
+	struct mmc_request mrq = {NULL};
+	struct mmc_command cmd = {0};
+	struct mmc_data data = {0};
+	struct scatterlist sg, *sg_ptr;
+	struct sg_table sgtable;
+	unsigned int nents, left_size, i;
+	unsigned int seg_size = card->host->max_seg_size;
+
+	BUG_ON(!card);
+	BUG_ON(fn > 7);
+	WARN_ON(blksz == 0);
+
+	/* sanity check */
+	if (addr & ~0x1FFFF)
+		return -EINVAL;
+
+	mrq.cmd = &cmd;
+	mrq.data = &data;
+
+	cmd.opcode = SD_IO_RW_EXTENDED;
+	cmd.arg = write ? 0x80000000 : 0x00000000;
+	cmd.arg |= fn << 28;
+	cmd.arg |= incr_addr ? 0x04000000 : 0x00000000;
+	cmd.arg |= addr << 9;
+	if (blocks == 0)
+		cmd.arg |= (blksz == 512) ? 0 : blksz;	/* byte mode */
+	else
+		cmd.arg |= 0x08000000 | blocks;		/* block mode */
+	cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
+
+	data.blksz = blksz;
+	/* Code in host drivers/fwk assumes that "blocks" always is >=1 */
+	data.blocks = blocks ? blocks : 1;
+	data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
+
+	left_size = data.blksz * data.blocks;
+	nents = (left_size - 1) / seg_size + 1;
+	if (nents > 1) {
+		if (sg_alloc_table(&sgtable, nents, GFP_KERNEL))
+			return -ENOMEM;
+
+		data.sg = sgtable.sgl;
+		data.sg_len = nents;
+
+		for_each_sg(data.sg, sg_ptr, data.sg_len, i) {
+			sg_set_page(sg_ptr, virt_to_page(buf + (i * seg_size)),
+					min(seg_size, left_size),
+					offset_in_page(buf + (i * seg_size)));
+			left_size = left_size - seg_size;
+		}
+	} else {
+		data.sg = &sg;
+		data.sg_len = 1;
+
+		sg_init_one(&sg, buf, left_size);
+	}
+
+	mmc_set_data_timeout(&data, card);
+
+	mmc_wait_for_req(card->host, &mrq);
+
+	if (nents > 1)
+		sg_free_table(&sgtable);
+
+	if (cmd.error)
+		return cmd.error;
+	if (data.error)
+		return data.error;
+
+	if (mmc_host_is_spi(card->host)) {
+		/* host driver already reported errors */
+	} else {
+		if (cmd.resp[0] & R5_ERROR)
+			return -EIO;
+		if (cmd.resp[0] & R5_FUNCTION_NUMBER)
+			return -EINVAL;
+		if (cmd.resp[0] & R5_OUT_OF_RANGE)
+			return -ERANGE;
+	}
+
+	return 0;
+}
+
+int sdio_reset(struct mmc_host *host)
+{
+	int ret;
+	u8 abort;
+
+	/* SDIO Simplified Specification V2.0, 4.4 Reset for SDIO */
+
+	ret = mmc_io_rw_direct_host(host, 0, 0, SDIO_CCCR_ABORT, 0, &abort);
+	if (ret)
+		abort = 0x08;
+	else
+		abort |= 0x08;
+
+	ret = mmc_io_rw_direct_host(host, 1, 0, SDIO_CCCR_ABORT, abort, NULL);
+	return ret;
+}
+

drivers/mmc/core/sdio_ops.h

@@ -0,0 +1,23 @@
+/*
+ *  linux/drivers/mmc/sdio_ops.c
+ *
+ *  Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef _MMC_SDIO_OPS_H
+#define _MMC_SDIO_OPS_H
+
+int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
+int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
+	unsigned addr, u8 in, u8* out);
+int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
+	unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz);
+int sdio_reset(struct mmc_host *host);
+
+#endif
+

drivers/mmc/core/slot-gpio.c

@@ -0,0 +1,407 @@
+/*
+ * Generic GPIO card-detect helper
+ *
+ * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+struct mmc_gpio {
+	struct gpio_desc *ro_gpio;
+	struct gpio_desc *cd_gpio;
+	bool override_ro_active_level;
+	bool override_cd_active_level;
+	char *ro_label;
+	char cd_label[0];
+};
+
+static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
+{
+	/* Schedule a card detection after a debounce timeout */
+	struct mmc_host *host = dev_id;
+
+	host->trigger_card_event = true;
+	mmc_detect_change(host, msecs_to_jiffies(200));
+
+	return IRQ_HANDLED;
+}
+
+static int mmc_gpio_alloc(struct mmc_host *host)
+{
+	size_t len = strlen(dev_name(host->parent)) + 4;
+	struct mmc_gpio *ctx;
+
+	mutex_lock(&host->slot.lock);
+
+	ctx = host->slot.handler_priv;
+	if (!ctx) {
+		/*
+		 * devm_kzalloc() can be called after device_initialize(), even
+		 * before device_add(), i.e., between mmc_alloc_host() and
+		 * mmc_add_host()
+		 */
+		ctx = devm_kzalloc(&host->class_dev, sizeof(*ctx) + 2 * len,
+				   GFP_KERNEL);
+		if (ctx) {
+			ctx->ro_label = ctx->cd_label + len;
+			snprintf(ctx->cd_label, len, "%s cd", dev_name(host->parent));
+			snprintf(ctx->ro_label, len, "%s ro", dev_name(host->parent));
+			host->slot.handler_priv = ctx;
+		}
+	}
+
+	mutex_unlock(&host->slot.lock);
+
+	return ctx ? 0 : -ENOMEM;
+}
+
+int mmc_gpio_get_ro(struct mmc_host *host)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+
+	if (!ctx || !ctx->ro_gpio)
+		return -ENOSYS;
+
+	if (ctx->override_ro_active_level)
+		return !gpiod_get_raw_value_cansleep(ctx->ro_gpio) ^
+			!!(host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH);
+
+	return gpiod_get_value_cansleep(ctx->ro_gpio);
+}
+EXPORT_SYMBOL(mmc_gpio_get_ro);
+
+int mmc_gpio_get_cd(struct mmc_host *host)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+
+	if (!ctx || !ctx->cd_gpio)
+		return -ENOSYS;
+
+	if (ctx->override_cd_active_level)
+		return !gpiod_get_raw_value_cansleep(ctx->cd_gpio) ^
+			!!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
+
+	return gpiod_get_value_cansleep(ctx->cd_gpio);
+}
+EXPORT_SYMBOL(mmc_gpio_get_cd);
+
+/**
+ * mmc_gpio_request_ro - request a gpio for write-protection
+ * @host: mmc host
+ * @gpio: gpio number requested
+ *
+ * As devm_* managed functions are used in mmc_gpio_request_ro(), client
+ * drivers do not need to explicitly call mmc_gpio_free_ro() for freeing up,
+ * if the requesting and freeing are only needed at probing and unbinding time
+ * for once.  However, if client drivers do something special like runtime
+ * switching for write-protection, they are responsible for calling
+ * mmc_gpio_request_ro() and mmc_gpio_free_ro() as a pair on their own.
+ *
+ * Returns zero on success, else an error.
+ */
+int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio)
+{
+	struct mmc_gpio *ctx;
+	int ret;
+
+	if (!gpio_is_valid(gpio))
+		return -EINVAL;
+
+	ret = mmc_gpio_alloc(host);
+	if (ret < 0)
+		return ret;
+
+	ctx = host->slot.handler_priv;
+
+	ret = devm_gpio_request_one(&host->class_dev, gpio, GPIOF_DIR_IN,
+				    ctx->ro_label);
+	if (ret < 0)
+		return ret;
+
+	ctx->override_ro_active_level = true;
+	ctx->ro_gpio = gpio_to_desc(gpio);
+
+	return 0;
+}
+EXPORT_SYMBOL(mmc_gpio_request_ro);
+
+void mmc_gpiod_request_cd_irq(struct mmc_host *host)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+	int ret, irq;
+
+	if (host->slot.cd_irq >= 0 || !ctx || !ctx->cd_gpio)
+		return;
+
+	irq = gpiod_to_irq(ctx->cd_gpio);
+
+	/*
+	 * Even if gpiod_to_irq() returns a valid IRQ number, the platform might
+	 * still prefer to poll, e.g., because that IRQ number is already used
+	 * by another unit and cannot be shared.
+	 */
+	if (irq >= 0 && host->caps & MMC_CAP_NEEDS_POLL)
+		irq = -EINVAL;
+
+	if (irq >= 0) {
+		ret = devm_request_threaded_irq(&host->class_dev, irq,
+			NULL, mmc_gpio_cd_irqt,
+			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			ctx->cd_label, host);
+		if (ret < 0)
+			irq = ret;
+	}
+
+	host->slot.cd_irq = irq;
+
+	if (irq < 0)
+		host->caps |= MMC_CAP_NEEDS_POLL;
+}
+EXPORT_SYMBOL(mmc_gpiod_request_cd_irq);
+
+/**
+ * mmc_gpio_request_cd - request a gpio for card-detection
+ * @host: mmc host
+ * @gpio: gpio number requested
+ * @debounce: debounce time in microseconds
+ *
+ * As devm_* managed functions are used in mmc_gpio_request_cd(), client
+ * drivers do not need to explicitly call mmc_gpio_free_cd() for freeing up,
+ * if the requesting and freeing are only needed at probing and unbinding time
+ * for once.  However, if client drivers do something special like runtime
+ * switching for card-detection, they are responsible for calling
+ * mmc_gpio_request_cd() and mmc_gpio_free_cd() as a pair on their own.
+ *
+ * If GPIO debouncing is desired, set the debounce parameter to a non-zero
+ * value. The caller is responsible for ensuring that the GPIO driver associated
+ * with the GPIO supports debouncing, otherwise an error will be returned.
+ *
+ * Returns zero on success, else an error.
+ */
+int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
+			unsigned int debounce)
+{
+	struct mmc_gpio *ctx;
+	int ret;
+
+	ret = mmc_gpio_alloc(host);
+	if (ret < 0)
+		return ret;
+
+	ctx = host->slot.handler_priv;
+
+	ret = devm_gpio_request_one(&host->class_dev, gpio, GPIOF_DIR_IN,
+				    ctx->cd_label);
+	if (ret < 0)
+		/*
+		 * don't bother freeing memory. It might still get used by other
+		 * slot functions, in any case it will be freed, when the device
+		 * is destroyed.
+		 */
+		return ret;
+
+	if (debounce) {
+		ret = gpio_set_debounce(gpio, debounce);
+		if (ret < 0)
+			return ret;
+	}
+
+	ctx->override_cd_active_level = true;
+	ctx->cd_gpio = gpio_to_desc(gpio);
+
+	return 0;
+}
+EXPORT_SYMBOL(mmc_gpio_request_cd);
+
+/**
+ * mmc_gpio_free_ro - free the write-protection gpio
+ * @host: mmc host
+ *
+ * It's provided only for cases that client drivers need to manually free
+ * up the write-protection gpio requested by mmc_gpio_request_ro().
+ */
+void mmc_gpio_free_ro(struct mmc_host *host)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+	int gpio;
+
+	if (!ctx || !ctx->ro_gpio)
+		return;
+
+	gpio = desc_to_gpio(ctx->ro_gpio);
+	ctx->ro_gpio = NULL;
+
+	devm_gpio_free(&host->class_dev, gpio);
+}
+EXPORT_SYMBOL(mmc_gpio_free_ro);
+
+/**
+ * mmc_gpio_free_cd - free the card-detection gpio
+ * @host: mmc host
+ *
+ * It's provided only for cases that client drivers need to manually free
+ * up the card-detection gpio requested by mmc_gpio_request_cd().
+ */
+void mmc_gpio_free_cd(struct mmc_host *host)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+	int gpio;
+
+	if (!ctx || !ctx->cd_gpio)
+		return;
+
+	if (host->slot.cd_irq >= 0) {
+		devm_free_irq(&host->class_dev, host->slot.cd_irq, host);
+		host->slot.cd_irq = -EINVAL;
+	}
+
+	gpio = desc_to_gpio(ctx->cd_gpio);
+	ctx->cd_gpio = NULL;
+
+	devm_gpio_free(&host->class_dev, gpio);
+}
+EXPORT_SYMBOL(mmc_gpio_free_cd);
+
+/**
+ * mmc_gpiod_request_cd - request a gpio descriptor for card-detection
+ * @host: mmc host
+ * @con_id: function within the GPIO consumer
+ * @idx: index of the GPIO to obtain in the consumer
+ * @override_active_level: ignore %GPIO_ACTIVE_LOW flag
+ * @debounce: debounce time in microseconds
+ * @gpio_invert: will return whether the GPIO line is inverted or not, set
+ * to NULL to ignore
+ *
+ * Use this function in place of mmc_gpio_request_cd() to use the GPIO
+ * descriptor API.  Note that it is paired with mmc_gpiod_free_cd() not
+ * mmc_gpio_free_cd().  Note also that it must be called prior to mmc_add_host()
+ * otherwise the caller must also call mmc_gpiod_request_cd_irq().
+ *
+ * Returns zero on success, else an error.
+ */
+int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
+			 unsigned int idx, bool override_active_level,
+			 unsigned int debounce, bool *gpio_invert)
+{
+	struct mmc_gpio *ctx;
+	struct gpio_desc *desc;
+	int ret;
+
+	ret = mmc_gpio_alloc(host);
+	if (ret < 0)
+		return ret;
+
+	ctx = host->slot.handler_priv;
+
+	if (!con_id)
+		con_id = ctx->cd_label;
+
+	desc = devm_gpiod_get_index(host->parent, con_id, idx, GPIOD_IN);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	if (debounce) {
+		ret = gpiod_set_debounce(desc, debounce);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (gpio_invert)
+		*gpio_invert = !gpiod_is_active_low(desc);
+
+	ctx->override_cd_active_level = override_active_level;
+	ctx->cd_gpio = desc;
+
+	return 0;
+}
+EXPORT_SYMBOL(mmc_gpiod_request_cd);
+
+/**
+ * mmc_gpiod_request_ro - request a gpio descriptor for write protection
+ * @host: mmc host
+ * @con_id: function within the GPIO consumer
+ * @idx: index of the GPIO to obtain in the consumer
+ * @override_active_level: ignore %GPIO_ACTIVE_LOW flag
+ * @debounce: debounce time in microseconds
+ * @gpio_invert: will return whether the GPIO line is inverted or not,
+ * set to NULL to ignore
+ *
+ * Use this function in place of mmc_gpio_request_ro() to use the GPIO
+ * descriptor API.  Note that it is paired with mmc_gpiod_free_ro() not
+ * mmc_gpio_free_ro().
+ *
+ * Returns zero on success, else an error.
+ */
+int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
+			 unsigned int idx, bool override_active_level,
+			 unsigned int debounce, bool *gpio_invert)
+{
+	struct mmc_gpio *ctx;
+	struct gpio_desc *desc;
+	int ret;
+
+	ret = mmc_gpio_alloc(host);
+	if (ret < 0)
+		return ret;
+
+	ctx = host->slot.handler_priv;
+
+	if (!con_id)
+		con_id = ctx->ro_label;
+
+	desc = devm_gpiod_get_index(host->parent, con_id, idx, GPIOD_IN);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	if (debounce) {
+		ret = gpiod_set_debounce(desc, debounce);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (gpio_invert)
+		*gpio_invert = !gpiod_is_active_low(desc);
+
+	ctx->override_ro_active_level = override_active_level;
+	ctx->ro_gpio = desc;
+
+	return 0;
+}
+EXPORT_SYMBOL(mmc_gpiod_request_ro);
+
+/**
+ * mmc_gpiod_free_cd - free the card-detection gpio descriptor
+ * @host: mmc host
+ *
+ * It's provided only for cases that client drivers need to manually free
+ * up the card-detection gpio requested by mmc_gpiod_request_cd().
+ */
+void mmc_gpiod_free_cd(struct mmc_host *host)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+
+	if (!ctx || !ctx->cd_gpio)
+		return;
+
+	if (host->slot.cd_irq >= 0) {
+		devm_free_irq(&host->class_dev, host->slot.cd_irq, host);
+		host->slot.cd_irq = -EINVAL;
+	}
+
+	devm_gpiod_put(host->parent, ctx->cd_gpio);
+
+	ctx->cd_gpio = NULL;
+}
+EXPORT_SYMBOL(mmc_gpiod_free_cd);

drivers/mmc/host/Kconfig

@@ -0,0 +1,795 @@
+#
+# MMC/SD host controller drivers
+#
+
+comment "MMC/SD/SDIO Host Controller Drivers"
+
+config MMC_ARMMMCI
+	tristate "ARM AMBA Multimedia Card Interface support"
+	depends on ARM_AMBA
+	help
+	  This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
+	  Interface (PL180 and PL181) support.  If you have an ARM(R)
+	  platform with a Multimedia Card slot, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_QCOM_DML
+	tristate "Qualcomm Data Mover for SD Card Controller"
+	depends on MMC_ARMMMCI && QCOM_BAM_DMA
+	default y
+	help
+	  This selects the Qualcomm Data Mover lite/local on SD Card controller.
+	  This option will enable the dma to work correctly, if you are using
+	  Qcom SOCs and MMC, you would probably need this option to get DMA working.
+
+	  if unsure, say N.
+
+config MMC_PXA
+	tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
+	depends on ARCH_PXA
+	help
+	  This selects the Intel(R) PXA(R) Multimedia card Interface.
+	  If you have a PXA(R) platform with a Multimedia Card slot,
+	  say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI
+	tristate "Secure Digital Host Controller Interface support"
+	depends on HAS_DMA
+	help
+	  This selects the generic Secure Digital Host Controller Interface.
+	  It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
+	  and Toshiba(R). Most controllers found in laptops are of this type.
+
+	  If you have a controller with this interface, say Y or M here. You
+	  also need to enable an appropriate bus interface.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_IO_ACCESSORS
+	bool
+	depends on MMC_SDHCI
+	help
+	  This is silent Kconfig symbol that is selected by the drivers that
+	  need to overwrite SDHCI IO memory accessors.
+
+config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
+	bool
+	select MMC_SDHCI_IO_ACCESSORS
+	help
+	  This option is selected by drivers running on big endian hosts
+	  and performing I/O to a SDHCI controller through a bus that
+	  implements a hardware byte swapper using a 32-bit datum.
+	  This endian mapping mode is called "data invariance" and
+	  has the effect of scrambling the addresses and formats of data
+	  accessed in sizes other than the datum size.
+
+	  This is the case for the Freescale eSDHC and Nintendo Wii SDHCI.
+
+config MMC_SDHCI_PCI
+	tristate "SDHCI support on PCI bus"
+	depends on MMC_SDHCI && PCI
+	help
+	  This selects the PCI Secure Digital Host Controller Interface.
+	  Most controllers found today are PCI devices.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_RICOH_MMC
+	bool "Ricoh MMC Controller Disabler"
+	depends on MMC_SDHCI_PCI
+	help
+	  This adds a pci quirk to disable Ricoh MMC Controller. This
+	  proprietary controller is unnecessary because the SDHCI driver
+	  supports MMC cards on the SD controller, but if it is not
+	  disabled, it will steal the MMC cards away - rendering them
+	  useless. It is safe to select this even if you don't
+	  have a Ricoh based card reader.
+
+	  If unsure, say Y.
+
+config MMC_SDHCI_ACPI
+	tristate "SDHCI support for ACPI enumerated SDHCI controllers"
+	depends on MMC_SDHCI && ACPI
+	help
+	  This selects support for ACPI enumerated SDHCI controllers,
+	  identified by ACPI Compatibility ID PNP0D40 or specific
+	  ACPI Hardware IDs.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_PLTFM
+	tristate "SDHCI platform and OF driver helper"
+	depends on MMC_SDHCI
+	help
+	  This selects the common helper functions support for Secure Digital
+	  Host Controller Interface based platform and OF drivers.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_OF_ARASAN
+	tristate "SDHCI OF support for the Arasan SDHCI controllers"
+	depends on MMC_SDHCI_PLTFM
+	depends on OF
+	help
+	  This selects the Arasan Secure Digital Host Controller Interface
+	  (SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_OF_ESDHC
+	tristate "SDHCI OF support for the Freescale eSDHC controller"
+	depends on MMC_SDHCI_PLTFM
+	depends on PPC_OF
+	select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
+	help
+	  This selects the Freescale eSDHC controller support.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_OF_HLWD
+	tristate "SDHCI OF support for the Nintendo Wii SDHCI controllers"
+	depends on MMC_SDHCI_PLTFM
+	depends on PPC_OF
+	select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
+	help
+	  This selects the Secure Digital Host Controller Interface (SDHCI)
+	  found in the "Hollywood" chipset of the Nintendo Wii video game
+	  console.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_CNS3XXX
+	tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
+	depends on ARCH_CNS3XXX
+	depends on MMC_SDHCI_PLTFM
+	help
+	  This selects the SDHCI support for CNS3xxx System-on-Chip devices.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_ESDHC_IMX
+	tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
+	depends on ARCH_MXC
+	depends on MMC_SDHCI_PLTFM
+	select MMC_SDHCI_IO_ACCESSORS
+	help
+	  This selects the Freescale eSDHC/uSDHC controller support
+	  found on i.MX25, i.MX35 i.MX5x and i.MX6x.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_DOVE
+	tristate "SDHCI support on Marvell's Dove SoC"
+	depends on ARCH_DOVE || MACH_DOVE
+	depends on MMC_SDHCI_PLTFM
+	select MMC_SDHCI_IO_ACCESSORS
+	help
+	  This selects the Secure Digital Host Controller Interface in
+	  Marvell's Dove SoC.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_TEGRA
+	tristate "SDHCI platform support for the Tegra SD/MMC Controller"
+	depends on ARCH_TEGRA
+	depends on MMC_SDHCI_PLTFM
+	select MMC_SDHCI_IO_ACCESSORS
+	help
+	  This selects the Tegra SD/MMC controller. If you have a Tegra
+	  platform with SD or MMC devices, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_S3C
+	tristate "SDHCI support on Samsung S3C SoC"
+	depends on MMC_SDHCI && PLAT_SAMSUNG
+	help
+	  This selects the Secure Digital Host Controller Interface (SDHCI)
+	  often referrered to as the HSMMC block in some of the Samsung S3C
+	  range of SoC.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_SIRF
+	tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
+	depends on ARCH_SIRF
+	depends on MMC_SDHCI_PLTFM
+	help
+	  This selects the SDHCI support for SiRF System-on-Chip devices.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_PXAV3
+	tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
+	depends on CLKDEV_LOOKUP
+	depends on MMC_SDHCI_PLTFM
+	default CPU_MMP2
+	help
+	  This selects the Marvell(R) PXAV3 SD Host Controller.
+	  If you have a MMP2 platform with SD Host Controller
+	  and a card slot, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_PXAV2
+	tristate "Marvell PXA9XX SD Host Controller support (PXAV2)"
+	depends on CLKDEV_LOOKUP
+	depends on MMC_SDHCI_PLTFM
+	default CPU_PXA910
+	help
+	  This selects the Marvell(R) PXAV2 SD Host Controller.
+	  If you have a PXA9XX platform with SD Host Controller
+	  and a card slot, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_SPEAR
+	tristate "SDHCI support on ST SPEAr platform"
+	depends on MMC_SDHCI && PLAT_SPEAR
+	help
+	  This selects the Secure Digital Host Controller Interface (SDHCI)
+	  often referrered to as the HSMMC block in some of the ST SPEAR range
+	  of SoC
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_S3C_DMA
+	bool "DMA support on S3C SDHCI"
+	depends on MMC_SDHCI_S3C
+	help
+	  Enable DMA support on the Samsung S3C SDHCI glue. The DMA
+	  has proved to be problematic if the controller encounters
+	  certain errors, and thus should be treated with care.
+
+	  YMMV.
+
+config MMC_SDHCI_BCM_KONA
+	tristate "SDHCI support on Broadcom KONA platform"
+	depends on ARCH_BCM_MOBILE
+	depends on MMC_SDHCI_PLTFM
+	help
+	  This selects the Broadcom Kona Secure Digital Host Controller
+	  Interface(SDHCI) support.
+	  This is used in Broadcom mobile SoCs.
+
+	  If you have a controller with this interface, say Y or M here.
+
+config MMC_SDHCI_BCM2835
+	tristate "SDHCI platform support for the BCM2835 SD/MMC Controller"
+	depends on ARCH_BCM2835
+	depends on MMC_SDHCI_PLTFM
+	select MMC_SDHCI_IO_ACCESSORS
+	help
+	  This selects the BCM2835 SD/MMC controller. If you have a BCM2835
+	  platform with SD or MMC devices, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_MOXART
+	tristate "MOXART SD/MMC Host Controller support"
+	depends on ARCH_MOXART && MMC
+	help
+	  This selects support for the MOXART SD/MMC Host Controller.
+	  MOXA provides one multi-functional card reader which can
+	  be found on some embedded hardware such as UC-7112-LX.
+	  If you have a controller with this interface, say Y here.
+
+config MMC_SDHCI_ST
+	tristate "SDHCI support on STMicroelectronics SoC"
+	depends on ARCH_STI
+	depends on MMC_SDHCI_PLTFM
+	select MMC_SDHCI_IO_ACCESSORS
+	help
+	  This selects the Secure Digital Host Controller Interface in
+	  STMicroelectronics SoCs.
+
+	  If you have a controller with this interface, say Y or M here.
+	  If unsure, say N.
+
+config MMC_OMAP
+	tristate "TI OMAP Multimedia Card Interface support"
+	depends on ARCH_OMAP
+	depends on TPS65010 || !MACH_OMAP_H2
+	help
+	  This selects the TI OMAP Multimedia card Interface.
+	  If you have an OMAP board with a Multimedia Card slot,
+	  say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_OMAP_HS
+	tristate "TI OMAP High Speed Multimedia Card Interface support"
+	depends on HAS_DMA
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	help
+	  This selects the TI OMAP High Speed Multimedia card Interface.
+	  If you have an omap2plus board with a Multimedia Card slot,
+	  say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_WBSD
+	tristate "Winbond W83L51xD SD/MMC Card Interface support"
+	depends on ISA_DMA_API
+	help
+	  This selects the Winbond(R) W83L51xD Secure digital and
+          Multimedia card Interface.
+	  If you have a machine with a integrated W83L518D or W83L519D
+	  SD/MMC card reader, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_AU1X
+	tristate "Alchemy AU1XX0 MMC Card Interface support"
+	depends on MIPS_ALCHEMY
+	help
+	  This selects the AMD Alchemy(R) Multimedia card interface.
+	  If you have a Alchemy platform with a MMC slot, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_ATMELMCI
+	tristate "Atmel SD/MMC Driver (Multimedia Card Interface)"
+	depends on AVR32 || ARCH_AT91
+	help
+	  This selects the Atmel Multimedia Card Interface driver. If
+	  you have an AT32 (AVR32) or AT91 platform with a Multimedia
+	  Card slot, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI_MSM
+	tristate "Qualcomm SDHCI Controller Support"
+	depends on ARCH_QCOM || (ARM && COMPILE_TEST)
+	depends on MMC_SDHCI_PLTFM
+	help
+	  This selects the Secure Digital Host Controller Interface (SDHCI)
+	  support present in Qualcomm SOCs. The controller supports
+	  SD/MMC/SDIO devices.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_MSM
+	tristate "Qualcomm SDCC Controller Support"
+	depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
+	help
+	  This provides support for the SD/MMC cell found in the
+	  MSM and QSD SOCs from Qualcomm. The controller also has
+	  support for SDIO devices.
+
+config MMC_MXC
+	tristate "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
+	depends on ARCH_MXC || PPC_MPC512x
+	help
+	  This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
+	  Multimedia Card Interface. If you have an i.MX or MPC512x platform
+	  with a Multimedia Card slot, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_MXS
+	tristate "Freescale MXS Multimedia Card Interface support"
+	depends on ARCH_MXS && MXS_DMA
+	help
+	  This selects the Freescale SSP MMC controller found on MXS based
+	  platforms like mx23/28.
+
+	  If unsure, say N.
+
+config MMC_TIFM_SD
+	tristate "TI Flash Media MMC/SD Interface support"
+	depends on PCI
+	select TIFM_CORE
+	help
+	  Say Y here if you want to be able to access MMC/SD cards with
+	  the Texas Instruments(R) Flash Media card reader, found in many
+	  laptops.
+	  This option 'selects' (turns on, enables) 'TIFM_CORE', but you
+	  probably also need appropriate card reader host adapter, such as
+	  'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support
+	  (TIFM_7XX1)'.
+
+          To compile this driver as a module, choose M here: the
+	  module will be called tifm_sd.
+
+config MMC_MVSDIO
+	tristate "Marvell MMC/SD/SDIO host driver"
+	depends on PLAT_ORION
+	---help---
+	  This selects the Marvell SDIO host driver.
+	  SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
+	  SoC controllers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mvsdio.
+
+config MMC_DAVINCI
+        tristate "TI DAVINCI Multimedia Card Interface support"
+        depends on ARCH_DAVINCI
+        help
+          This selects the TI DAVINCI Multimedia card Interface.
+          If you have an DAVINCI board with a Multimedia Card slot,
+          say Y or M here.  If unsure, say N.
+
+config MMC_GOLDFISH
+	tristate "goldfish qemu Multimedia Card Interface support"
+	depends on GOLDFISH
+	help
+	  This selects the Goldfish Multimedia card Interface emulation
+	  found on the Goldfish Android virtual device emulation.
+
+config MMC_SPI
+	tristate "MMC/SD/SDIO over SPI"
+	depends on SPI_MASTER && !HIGHMEM && HAS_DMA
+	select CRC7
+	select CRC_ITU_T
+	help
+	  Some systems access MMC/SD/SDIO cards using a SPI controller
+	  instead of using a "native" MMC/SD/SDIO controller.  This has a
+	  disadvantage of being relatively high overhead, but a compensating
+	  advantage of working on many systems without dedicated MMC/SD/SDIO
+	  controllers.
+
+	  If unsure, or if your system has no SPI master driver, say N.
+
+config MMC_S3C
+	tristate "Samsung S3C SD/MMC Card Interface support"
+	depends on ARCH_S3C24XX
+	depends on S3C24XX_DMAC
+	help
+	  This selects a driver for the MCI interface found in
+          Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
+	  If you have a board based on one of those and a MMC/SD
+	  slot, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_S3C_HW_SDIO_IRQ
+       bool "Hardware support for SDIO IRQ"
+       depends on MMC_S3C
+       help
+         Enable the hardware support for SDIO interrupts instead of using
+	 the generic polling code.
+
+choice
+	prompt "Samsung S3C SD/MMC transfer code"
+	depends on MMC_S3C
+
+config MMC_S3C_PIO
+	bool "Use PIO transfers only"
+	help
+	  Use PIO to transfer data between memory and the hardware.
+
+	  PIO is slower than DMA as it requires CPU instructions to
+	  move the data. This has been the traditional default for
+	  the S3C MCI driver.
+
+config MMC_S3C_DMA
+	bool "Use DMA transfers only"
+	help
+	  Use DMA to transfer data between memory and the hardare.
+
+	  Currently, the DMA support in this driver seems to not be
+	  working properly and needs to be debugged before this
+	  option is useful.
+
+endchoice
+
+config MMC_SDRICOH_CS
+	tristate "MMC/SD driver for Ricoh Bay1Controllers"
+	depends on PCI && PCMCIA
+	help
+	  Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
+	  card whenever you insert a MMC or SD card into the card slot.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sdricoh_cs.
+
+config MMC_TMIO_CORE
+	tristate
+
+config MMC_TMIO
+	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
+	depends on MFD_TMIO || MFD_ASIC3
+	select MMC_TMIO_CORE
+	help
+	  This provides support for the SD/MMC cell found in TC6393XB,
+	  T7L66XB and also HTC ASIC3
+
+config MMC_SDHI
+	tristate "SH-Mobile SDHI SD/SDIO controller support"
+	depends on SUPERH || ARM
+	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+	select MMC_TMIO_CORE
+	help
+	  This provides support for the SDHI SD/SDIO controller found in
+	  SuperH and ARM SH-Mobile SoCs
+
+config MMC_CB710
+	tristate "ENE CB710 MMC/SD Interface support"
+	depends on PCI
+	select CB710_CORE
+	help
+	  This option enables support for MMC/SD part of ENE CB710/720 Flash
+	  memory card reader found in some laptops (ie. some versions of
+	  HP Compaq nx9500).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called cb710-mmc.
+
+config MMC_VIA_SDMMC
+	tristate "VIA SD/MMC Card Reader Driver"
+	depends on PCI
+	help
+	  This selects the VIA SD/MMC Card Reader driver, say Y or M here.
+	  VIA provides one multi-functional card reader which integrated into
+	  some motherboards manufactured by VIA. This card reader supports
+	  SD/MMC/SDHC.
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config SDH_BFIN
+	tristate "Blackfin Secure Digital Host support"
+	depends on (BF54x && !BF544) || (BF51x && !BF512)
+	help
+	  If you say yes here you will get support for the Blackfin on-chip
+	  Secure Digital Host interface.  This includes support for MMC and
+	  SD cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin_sdh.
+
+	  If unsure, say N.
+
+config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
+	bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround"
+	depends on SDH_BFIN
+	help
+	  If you say yes here SD-Cards may work on the EZkit.
+
+config MMC_DW
+	tristate "Synopsys DesignWare Memory Card Interface"
+	depends on HAS_DMA
+	depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST
+	help
+	  This selects support for the Synopsys DesignWare Mobile Storage IP
+	  block, this provides host support for SD and MMC interfaces, in both
+	  PIO and external DMA modes.
+
+config MMC_DW_FMP_DM_CRYPT
+	bool "FMP acceleration for DM_CRYPT"
+	depends on DM_CRYPT && FMP_MMC
+	help
+	  This option accelerates dm-crypt by using the flash
+	  memory protector feature of the eMMC controller.
+
+config MMC_DW_FMP_ECRYPT_FS
+	bool "FMP acceleration for eCrypt filesystem"
+	depends on ECRYPT_FS && FMP_MMC
+	help
+	  This option activates flash memory protector of the eMMC controller to
+	  accelerate eCryptfs.
+
+config MMC_DW_IDMAC
+	bool "Internal DMAC interface"
+	depends on MMC_DW
+	help
+	  This selects support for the internal DMAC block within the Synopsys
+	  Designware Mobile Storage IP block. This disables the external DMA
+	  interface.
+
+config MMC_DW_64BIT_DESC
+	bool "64bit desctriptor interface"
+	depends on MMC_DW
+	help
+	  This selects support for the 64bit internal DMAC block within the Synopsys
+	  Designware Mobile Storage IP block. This disables the 32bit internal DMA
+	  interface.
+
+config MMC_DW_PLTFM
+	tristate "Synopsys Designware MCI Support as platform device"
+	depends on MMC_DW
+	default y
+	help
+	  This selects the common helper functions support for Host Controller
+	  Interface based platform driver. Please select this option if the IP
+	  is present as a platform device. This is the common interface for the
+	  Synopsys Designware IP.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say Y.
+
+config MMC_DW_EXYNOS
+	tristate "Exynos specific extensions for Synopsys DW Memory Card Interface"
+	depends on MMC_DW
+	select MMC_DW_PLTFM
+	help
+	  This selects support for Samsung Exynos SoC specific extensions to the
+	  Synopsys DesignWare Memory Card Interface driver. Select this option
+	  for platforms based on Exynos4 and Exynos5 SoC's.
+
+config MMC_DW_EXYNOS_EMMC_POWERCTRL
+	tristate "Exynos specific extensions for Synopsys DWMCI needed eMMC power ctrl"
+	depends on MMC_DW_EXYNOS
+	select MMC_DW_PLTFM
+	help
+	  This selects support for Samsung Exynos SoC specific extensions to the
+	  Synopsys DesignWare Memory Card Interface driver.
+
+config MMC_DW_DEBUG
+	bool "Samsung DWMCI debug feature"
+	depends on MMC_DW
+	help
+	  This selects support for infomation logging for debugging.
+	  Select this option if this feature is needed on working.
+
+config MMC_DW_K3
+	tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
+	depends on MMC_DW
+	select MMC_DW_PLTFM
+	select MMC_DW_IDMAC
+	help
+	  This selects support for Hisilicon K3 SoC specific extensions to the
+	  Synopsys DesignWare Memory Card Interface driver. Select this option
+	  for platforms based on Hisilicon K3 SoC's.
+
+config MMC_DW_PCI
+	tristate "Synopsys Designware MCI support on PCI bus"
+	depends on MMC_DW && PCI
+	help
+	  This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
+	  Select this option if the IP is present on PCI platform.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_DW_ROCKCHIP
+	tristate "Rockchip specific extensions for Synopsys DW Memory Card Interface"
+	depends on MMC_DW && ARCH_ROCKCHIP
+	select MMC_DW_PLTFM
+	help
+	  This selects support for Rockchip SoC specific extensions to the
+	  Synopsys DesignWare Memory Card Interface driver. Select this option
+	  for platforms based on RK3066, RK3188 and RK3288 SoC's.
+
+config MMC_DW_FORCE_32BIT_SFR_RW
+	bool "Force to use 32bit rw for 64bit SFR rw"
+	depends on MMC_DW
+	help
+	  This selects converting 64bit SFR read/write by two separate 32bit
+	  read/write when 64bit read/write is not allowed for SFR on some DW
+	  MMC implementation. Consider using this with FIFO SFR on PIO mode.
+
+config MMC_SH_MMCIF
+	tristate "SuperH Internal MMCIF support"
+	depends on MMC_BLOCK && HAS_DMA
+	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+	help
+	  This selects the MMC Host Interface controller (MMCIF).
+
+	  This driver supports MMCIF in sh7724/sh7757/sh7372.
+
+config MMC_JZ4740
+	tristate "JZ4740 SD/Multimedia Card Interface support"
+	depends on MACH_JZ4740
+	help
+	  This selects support for the SD/MMC controller on Ingenic JZ4740
+	  SoCs.
+	  If you have a board based on such a SoC and with a SD/MMC slot,
+	  say Y or M here.
+
+config MMC_VUB300
+	tristate "VUB300 USB to SDIO/SD/MMC Host Controller support"
+	depends on USB
+	help
+	  This selects support for Elan Digital Systems' VUB300 chip.
+
+	  The VUB300 is a USB-SDIO Host Controller Interface chip
+	  that enables the host computer to use SDIO/SD/MMC cards
+	  via a USB 2.0 or USB 1.1 host.
+
+	  The VUB300 chip will be found in both physically separate
+	  USB to SDIO/SD/MMC adapters and embedded on some motherboards.
+
+	  The VUB300 chip supports SD and MMC memory cards in addition
+	  to single and multifunction SDIO cards.
+
+	  Some SDIO cards will need a firmware file to be loaded and
+	  sent to VUB300 chip in order to achieve better data throughput.
+	  Download these "Offload Pseudocode" from Elan Digital Systems'
+	  web-site http://www.elandigitalsystems.com/support/downloads.php
+	  and put them in /lib/firmware. Note that without these additional
+	  firmware files the VUB300 chip will still function, but not at
+	  the best obtainable data rate.
+
+	  To compile this mmc host controller driver as a module,
+	  choose M here: the module will be called vub300.
+
+	  If you have a computer with an embedded VUB300 chip
+	  or if you intend connecting a USB adapter based on a
+	  VUB300 chip say Y or M here.
+
+config MMC_USHC
+	tristate "USB SD Host Controller (USHC) support"
+	depends on USB
+	help
+	  This selects support for USB SD Host Controllers based on
+	  the Cypress Astoria chip with firmware compliant with CSR's
+	  USB SD Host Controller specification (CS-118793-SP).
+
+	  CSR boards with this device include: USB<>SDIO (M1985v2),
+	  and Ultrasira.
+
+	  Note: These controllers only support SDIO cards and do not
+	  support MMC or SD memory cards.
+
+config MMC_WMT
+	tristate "Wondermedia SD/MMC Host Controller support"
+	depends on ARCH_VT8500
+	default y
+	help
+	  This selects support for the SD/MMC Host Controller on
+	  Wondermedia WM8505/WM8650 based SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wmt-sdmmc.
+
+config MMC_USDHI6ROL0
+	tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
+	depends on HAS_DMA
+	help
+	  This selects support for the Renesas USDHI6ROL0 SD/SDIO
+	  Host Controller
+
+config MMC_REALTEK_PCI
+	tristate "Realtek PCI-E SD/MMC Card Interface Driver"
+	depends on MFD_RTSX_PCI
+	help
+	  Say Y here to include driver code to support SD/MMC card interface
+	  of Realtek PCI-E card reader
+
+config MMC_REALTEK_USB
+	tristate "Realtek USB SD/MMC Card Interface Driver"
+	depends on MFD_RTSX_USB
+	help
+	  Say Y here to include driver code to support SD/MMC card interface
+	  of Realtek RTS5129/39 series card reader
+
+config MMC_SUNXI
+	tristate "Allwinner sunxi SD/MMC Host Controller support"
+	depends on ARCH_SUNXI
+	help
+	  This selects support for the SD/MMC Host Controller on
+	  Allwinner sunxi SoCs.

drivers/mmc/host/Makefile

@@ -0,0 +1,77 @@
+#
+# Makefile for MMC/SD host controller drivers
+#
+
+obj-$(CONFIG_MMC_ARMMMCI)	+= mmci.o
+obj-$(CONFIG_MMC_QCOM_DML)	+= mmci_qcom_dml.o
+obj-$(CONFIG_MMC_PXA)		+= pxamci.o
+obj-$(CONFIG_MMC_MXC)		+= mxcmmc.o
+obj-$(CONFIG_MMC_MXS)		+= mxs-mmc.o
+obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
+obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
+obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI))	+= sdhci-pci-data.o
+obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI))	+= sdhci-pci-o2micro.o
+obj-$(CONFIG_MMC_SDHCI_ACPI)	+= sdhci-acpi.o
+obj-$(CONFIG_MMC_SDHCI_PXAV3)	+= sdhci-pxav3.o
+obj-$(CONFIG_MMC_SDHCI_PXAV2)	+= sdhci-pxav2.o
+obj-$(CONFIG_MMC_SDHCI_S3C)	+= sdhci-s3c.o
+obj-$(CONFIG_MMC_SDHCI_SIRF)   	+= sdhci-sirf.o
+obj-$(CONFIG_MMC_SDHCI_SPEAR)	+= sdhci-spear.o
+obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
+obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
+obj-$(CONFIG_MMC_OMAP)		+= omap.o
+obj-$(CONFIG_MMC_OMAP_HS)	+= omap_hsmmc.o
+obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
+obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
+obj-$(CONFIG_MMC_MSM)		+= msm_sdcc.o
+obj-$(CONFIG_MMC_MVSDIO)	+= mvsdio.o
+obj-$(CONFIG_MMC_DAVINCI)       += davinci_mmc.o
+obj-$(CONFIG_MMC_GOLDFISH)	+= android-goldfish.o
+obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
+ifeq ($(CONFIG_OF),y)
+obj-$(CONFIG_MMC_SPI)		+= of_mmc_spi.o
+endif
+obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
+obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
+obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
+obj-$(CONFIG_MMC_TMIO_CORE)	+= tmio_mmc_core.o
+tmio_mmc_core-y			:= tmio_mmc_pio.o
+tmio_mmc_core-$(subst m,y,$(CONFIG_MMC_SDHI))	+= tmio_mmc_dma.o
+obj-$(CONFIG_MMC_SDHI)		+= sh_mobile_sdhi.o
+obj-$(CONFIG_MMC_CB710)		+= cb710-mmc.o
+obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
+obj-$(CONFIG_SDH_BFIN)		+= bfin_sdh.o
+obj-$(CONFIG_MMC_DW)		+= dw_mmc.o
+obj-$(CONFIG_MMC_DW_PLTFM)	+= dw_mmc-pltfm.o
+obj-$(CONFIG_MMC_DW_EXYNOS)	+= dw_mmc-exynos.o
+obj-$(CONFIG_MMC_DW_K3)		+= dw_mmc-k3.o
+obj-$(CONFIG_MMC_DW_PCI)	+= dw_mmc-pci.o
+obj-$(CONFIG_MMC_DW_ROCKCHIP)	+= dw_mmc-rockchip.o
+obj-$(CONFIG_MMC_SH_MMCIF)	+= sh_mmcif.o
+obj-$(CONFIG_MMC_JZ4740)	+= jz4740_mmc.o
+obj-$(CONFIG_MMC_VUB300)	+= vub300.o
+obj-$(CONFIG_MMC_USHC)		+= ushc.o
+obj-$(CONFIG_MMC_WMT)		+= wmt-sdmmc.o
+obj-$(CONFIG_MMC_MOXART)	+= moxart-mmc.o
+obj-$(CONFIG_MMC_SUNXI)		+= sunxi-mmc.o
+obj-$(CONFIG_MMC_USDHI6ROL0)	+= usdhi6rol0.o
+
+obj-$(CONFIG_MMC_REALTEK_PCI)	+= rtsx_pci_sdmmc.o
+obj-$(CONFIG_MMC_REALTEK_USB)	+= rtsx_usb_sdmmc.o
+
+obj-$(CONFIG_MMC_SDHCI_PLTFM)		+= sdhci-pltfm.o
+obj-$(CONFIG_MMC_SDHCI_CNS3XXX)		+= sdhci-cns3xxx.o
+obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX)	+= sdhci-esdhc-imx.o
+obj-$(CONFIG_MMC_SDHCI_DOVE)		+= sdhci-dove.o
+obj-$(CONFIG_MMC_SDHCI_TEGRA)		+= sdhci-tegra.o
+obj-$(CONFIG_MMC_SDHCI_OF_ARASAN)	+= sdhci-of-arasan.o
+obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)	+= sdhci-of-esdhc.o
+obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
+obj-$(CONFIG_MMC_SDHCI_BCM_KONA)	+= sdhci-bcm-kona.o
+obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= sdhci-bcm2835.o
+obj-$(CONFIG_MMC_SDHCI_MSM)		+= sdhci-msm.o
+obj-$(CONFIG_MMC_SDHCI_ST)		+= sdhci-st.o
+
+ifeq ($(CONFIG_CB710_DEBUG),y)
+	CFLAGS-cb710-mmc	+= -DDEBUG
+endif

drivers/mmc/host/android-goldfish.c

@@ -0,0 +1,568 @@
+/*
+ *  Copyright 2007, Google Inc.
+ *  Copyright 2012, Intel Inc.
+ *
+ *  based on omap.c driver, which was
+ *  Copyright (C) 2004 Nokia Corporation
+ *  Written by Tuukka Tikkanen and Juha Yrjölä <juha.yrjola@nokia.com>
+ *  Misc hacks here and there by Tony Lindgren <tony@atomide.com>
+ *  Other hacks (DMA, SD, etc) by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/major.h>
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/hdreg.h>
+#include <linux/kdev_t.h>
+#include <linux/blkdev.h>
+#include <linux/mutex.h>
+#include <linux/scatterlist.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/scatterlist.h>
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define DRIVER_NAME "goldfish_mmc"
+
+#define BUFFER_SIZE   16384
+
+#define GOLDFISH_MMC_READ(host, addr)   (readl(host->reg_base + addr))
+#define GOLDFISH_MMC_WRITE(host, addr, x)   (writel(x, host->reg_base + addr))
+
+enum {
+	/* status register */
+	MMC_INT_STATUS	        = 0x00,
+	/* set this to enable IRQ */
+	MMC_INT_ENABLE	        = 0x04,
+	/* set this to specify buffer address */
+	MMC_SET_BUFFER          = 0x08,
+
+	/* MMC command number */
+	MMC_CMD	                = 0x0C,
+
+	/* MMC argument */
+	MMC_ARG	                = 0x10,
+
+	/* MMC response (or R2 bits 0 - 31) */
+	MMC_RESP_0		        = 0x14,
+
+	/* MMC R2 response bits 32 - 63 */
+	MMC_RESP_1		        = 0x18,
+
+	/* MMC R2 response bits 64 - 95 */
+	MMC_RESP_2		        = 0x1C,
+
+	/* MMC R2 response bits 96 - 127 */
+	MMC_RESP_3		        = 0x20,
+
+	MMC_BLOCK_LENGTH        = 0x24,
+	MMC_BLOCK_COUNT         = 0x28,
+
+	/* MMC state flags */
+	MMC_STATE               = 0x2C,
+
+	/* MMC_INT_STATUS bits */
+
+	MMC_STAT_END_OF_CMD     = 1U << 0,
+	MMC_STAT_END_OF_DATA    = 1U << 1,
+	MMC_STAT_STATE_CHANGE   = 1U << 2,
+	MMC_STAT_CMD_TIMEOUT    = 1U << 3,
+
+	/* MMC_STATE bits */
+	MMC_STATE_INSERTED     = 1U << 0,
+	MMC_STATE_READ_ONLY    = 1U << 1,
+};
+
+/*
+ * Command types
+ */
+#define OMAP_MMC_CMDTYPE_BC	0
+#define OMAP_MMC_CMDTYPE_BCR	1
+#define OMAP_MMC_CMDTYPE_AC	2
+#define OMAP_MMC_CMDTYPE_ADTC	3
+
+
+struct goldfish_mmc_host {
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+	struct mmc_host		*mmc;
+	struct device		*dev;
+	unsigned char		id; /* 16xx chips have 2 MMC blocks */
+	void __iomem		*virt_base;
+	unsigned int		phys_base;
+	int			irq;
+	unsigned char		bus_mode;
+	unsigned char		hw_bus_mode;
+
+	unsigned int		sg_len;
+	unsigned		dma_done:1;
+	unsigned		dma_in_use:1;
+
+	void __iomem		*reg_base;
+};
+
+static inline int
+goldfish_mmc_cover_is_open(struct goldfish_mmc_host *host)
+{
+	return 0;
+}
+
+static ssize_t
+goldfish_mmc_show_cover_switch(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct goldfish_mmc_host *host = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", goldfish_mmc_cover_is_open(host) ? "open" :
+		       "closed");
+}
+
+static DEVICE_ATTR(cover_switch, S_IRUGO, goldfish_mmc_show_cover_switch, NULL);
+
+static void
+goldfish_mmc_start_command(struct goldfish_mmc_host *host, struct mmc_command *cmd)
+{
+	u32 cmdreg;
+	u32 resptype;
+	u32 cmdtype;
+
+	host->cmd = cmd;
+
+	resptype = 0;
+	cmdtype = 0;
+
+	/* Our hardware needs to know exact type */
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE:
+		break;
+	case MMC_RSP_R1:
+	case MMC_RSP_R1B:
+		/* resp 1, 1b, 6, 7 */
+		resptype = 1;
+		break;
+	case MMC_RSP_R2:
+		resptype = 2;
+		break;
+	case MMC_RSP_R3:
+		resptype = 3;
+		break;
+	default:
+		dev_err(mmc_dev(host->mmc),
+			"Invalid response type: %04x\n", mmc_resp_type(cmd));
+		break;
+	}
+
+	if (mmc_cmd_type(cmd) == MMC_CMD_ADTC)
+		cmdtype = OMAP_MMC_CMDTYPE_ADTC;
+	else if (mmc_cmd_type(cmd) == MMC_CMD_BC)
+		cmdtype = OMAP_MMC_CMDTYPE_BC;
+	else if (mmc_cmd_type(cmd) == MMC_CMD_BCR)
+		cmdtype = OMAP_MMC_CMDTYPE_BCR;
+	else
+		cmdtype = OMAP_MMC_CMDTYPE_AC;
+
+	cmdreg = cmd->opcode | (resptype << 8) | (cmdtype << 12);
+
+	if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
+		cmdreg |= 1 << 6;
+
+	if (cmd->flags & MMC_RSP_BUSY)
+		cmdreg |= 1 << 11;
+
+	if (host->data && !(host->data->flags & MMC_DATA_WRITE))
+		cmdreg |= 1 << 15;
+
+	GOLDFISH_MMC_WRITE(host, MMC_ARG, cmd->arg);
+	GOLDFISH_MMC_WRITE(host, MMC_CMD, cmdreg);
+}
+
+static void goldfish_mmc_xfer_done(struct goldfish_mmc_host *host,
+				   struct mmc_data *data)
+{
+	if (host->dma_in_use) {
+		enum dma_data_direction dma_data_dir;
+
+		if (data->flags & MMC_DATA_WRITE)
+			dma_data_dir = DMA_TO_DEVICE;
+		else
+			dma_data_dir = DMA_FROM_DEVICE;
+
+		if (dma_data_dir == DMA_FROM_DEVICE) {
+			/*
+			 * We don't really have DMA, so we need
+			 * to copy from our platform driver buffer
+			 */
+			uint8_t *dest = (uint8_t *)sg_virt(data->sg);
+			memcpy(dest, host->virt_base, data->sg->length);
+		}
+		host->data->bytes_xfered += data->sg->length;
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len,
+			     dma_data_dir);
+	}
+
+	host->data = NULL;
+	host->sg_len = 0;
+
+	/*
+	 * NOTE:  MMC layer will sometimes poll-wait CMD13 next, issuing
+	 * dozens of requests until the card finishes writing data.
+	 * It'd be cheaper to just wait till an EOFB interrupt arrives...
+	 */
+
+	if (!data->stop) {
+		host->mrq = NULL;
+		mmc_request_done(host->mmc, data->mrq);
+		return;
+	}
+
+	goldfish_mmc_start_command(host, data->stop);
+}
+
+static void goldfish_mmc_end_of_data(struct goldfish_mmc_host *host,
+				     struct mmc_data *data)
+{
+	if (!host->dma_in_use) {
+		goldfish_mmc_xfer_done(host, data);
+		return;
+	}
+	if (host->dma_done)
+		goldfish_mmc_xfer_done(host, data);
+}
+
+static void goldfish_mmc_cmd_done(struct goldfish_mmc_host *host,
+				  struct mmc_command *cmd)
+{
+	host->cmd = NULL;
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			/* response type 2 */
+			cmd->resp[3] =
+				GOLDFISH_MMC_READ(host, MMC_RESP_0);
+			cmd->resp[2] =
+				GOLDFISH_MMC_READ(host, MMC_RESP_1);
+			cmd->resp[1] =
+				GOLDFISH_MMC_READ(host, MMC_RESP_2);
+			cmd->resp[0] =
+				GOLDFISH_MMC_READ(host, MMC_RESP_3);
+		} else {
+			/* response types 1, 1b, 3, 4, 5, 6 */
+			cmd->resp[0] =
+				GOLDFISH_MMC_READ(host, MMC_RESP_0);
+		}
+	}
+
+	if (host->data == NULL || cmd->error) {
+		host->mrq = NULL;
+		mmc_request_done(host->mmc, cmd->mrq);
+	}
+}
+
+static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id)
+{
+	struct goldfish_mmc_host *host = (struct goldfish_mmc_host *)dev_id;
+	u16 status;
+	int end_command = 0;
+	int end_transfer = 0;
+	int transfer_error = 0;
+	int state_changed = 0;
+	int cmd_timeout = 0;
+
+	while ((status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS)) != 0) {
+		GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status);
+
+		if (status & MMC_STAT_END_OF_CMD)
+			end_command = 1;
+
+		if (status & MMC_STAT_END_OF_DATA)
+			end_transfer = 1;
+
+		if (status & MMC_STAT_STATE_CHANGE)
+			state_changed = 1;
+
+                if (status & MMC_STAT_CMD_TIMEOUT) {
+			end_command = 0;
+			cmd_timeout = 1;
+                }
+	}
+
+	if (cmd_timeout) {
+		struct mmc_request *mrq = host->mrq;
+		mrq->cmd->error = -ETIMEDOUT;
+		host->mrq = NULL;
+		mmc_request_done(host->mmc, mrq);
+	}
+
+	if (end_command)
+		goldfish_mmc_cmd_done(host, host->cmd);
+
+	if (transfer_error)
+		goldfish_mmc_xfer_done(host, host->data);
+	else if (end_transfer) {
+		host->dma_done = 1;
+		goldfish_mmc_end_of_data(host, host->data);
+	} else if (host->data != NULL) {
+		/*
+		 * WORKAROUND -- after porting this driver from 2.6 to 3.4,
+		 * during device initialization, cases where host->data is
+		 * non-null but end_transfer is false would occur. Doing
+		 * nothing in such cases results in no further interrupts,
+		 * and initialization failure.
+		 * TODO -- find the real cause.
+		 */
+		host->dma_done = 1;
+		goldfish_mmc_end_of_data(host, host->data);
+	}
+
+	if (state_changed) {
+		u32 state = GOLDFISH_MMC_READ(host, MMC_STATE);
+		pr_info("%s: Card detect now %d\n", __func__,
+			(state & MMC_STATE_INSERTED));
+		mmc_detect_change(host->mmc, 0);
+	}
+
+	if (!end_command && !end_transfer &&
+	    !transfer_error && !state_changed && !cmd_timeout) {
+		status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS);
+		dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status);
+		if (status != 0) {
+			GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status);
+			GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, 0);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void goldfish_mmc_prepare_data(struct goldfish_mmc_host *host,
+				      struct mmc_request *req)
+{
+	struct mmc_data *data = req->data;
+	int block_size;
+	unsigned sg_len;
+	enum dma_data_direction dma_data_dir;
+
+	host->data = data;
+	if (data == NULL) {
+		GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, 0);
+		GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, 0);
+		host->dma_in_use = 0;
+		return;
+	}
+
+	block_size = data->blksz;
+
+	GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, data->blocks - 1);
+	GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, block_size - 1);
+
+	/*
+	 * Cope with calling layer confusion; it issues "single
+	 * block" writes using multi-block scatterlists.
+	 */
+	sg_len = (data->blocks == 1) ? 1 : data->sg_len;
+
+	if (data->flags & MMC_DATA_WRITE)
+		dma_data_dir = DMA_TO_DEVICE;
+	else
+		dma_data_dir = DMA_FROM_DEVICE;
+
+	host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
+				  sg_len, dma_data_dir);
+	host->dma_done = 0;
+	host->dma_in_use = 1;
+
+	if (dma_data_dir == DMA_TO_DEVICE) {
+		/*
+		 * We don't really have DMA, so we need to copy to our
+		 * platform driver buffer
+		 */
+		const uint8_t *src = (uint8_t *)sg_virt(data->sg);
+		memcpy(host->virt_base, src, data->sg->length);
+	}
+}
+
+static void goldfish_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+	struct goldfish_mmc_host *host = mmc_priv(mmc);
+
+	WARN_ON(host->mrq != NULL);
+
+	host->mrq = req;
+	goldfish_mmc_prepare_data(host, req);
+	goldfish_mmc_start_command(host, req->cmd);
+
+	/*
+	 * This is to avoid accidentally being detected as an SDIO card
+	 * in mmc_attach_sdio().
+	 */
+	if (req->cmd->opcode == SD_IO_SEND_OP_COND &&
+	    req->cmd->flags == (MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR))
+		req->cmd->error = -EINVAL;
+}
+
+static void goldfish_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct goldfish_mmc_host *host = mmc_priv(mmc);
+
+	host->bus_mode = ios->bus_mode;
+	host->hw_bus_mode = host->bus_mode;
+}
+
+static int goldfish_mmc_get_ro(struct mmc_host *mmc)
+{
+	uint32_t state;
+	struct goldfish_mmc_host *host = mmc_priv(mmc);
+
+	state = GOLDFISH_MMC_READ(host, MMC_STATE);
+	return ((state & MMC_STATE_READ_ONLY) != 0);
+}
+
+static const struct mmc_host_ops goldfish_mmc_ops = {
+	.request	= goldfish_mmc_request,
+	.set_ios	= goldfish_mmc_set_ios,
+	.get_ro		= goldfish_mmc_get_ro,
+};
+
+static int goldfish_mmc_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct goldfish_mmc_host *host = NULL;
+	struct resource *res;
+	int ret = 0;
+	int irq;
+	dma_addr_t buf_addr;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (res == NULL || irq < 0)
+		return -ENXIO;
+
+	mmc = mmc_alloc_host(sizeof(struct goldfish_mmc_host), &pdev->dev);
+	if (mmc == NULL) {
+		ret = -ENOMEM;
+		goto err_alloc_host_failed;
+	}
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+
+	pr_err("mmc: Mapping %lX to %lX\n", (long)res->start, (long)res->end);
+	host->reg_base = ioremap(res->start, resource_size(res));
+	if (host->reg_base == NULL) {
+		ret = -ENOMEM;
+		goto ioremap_failed;
+	}
+	host->virt_base = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
+					     &buf_addr, GFP_KERNEL);
+
+	if (host->virt_base == 0) {
+		ret = -ENOMEM;
+		goto dma_alloc_failed;
+	}
+	host->phys_base = buf_addr;
+
+	host->id = pdev->id;
+	host->irq = irq;
+
+	mmc->ops = &goldfish_mmc_ops;
+	mmc->f_min = 400000;
+	mmc->f_max = 24000000;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+
+	/* Use scatterlist DMA to reduce per-transfer costs.
+	 * NOTE max_seg_size assumption that small blocks aren't
+	 * normally used (except e.g. for reading SD registers).
+	 */
+	mmc->max_segs = 32;
+	mmc->max_blk_size = 2048;	/* MMC_BLOCK_LENGTH is 11 bits (+1) */
+	mmc->max_blk_count = 2048;	/* MMC_BLOCK_COUNT is 11 bits (+1) */
+	mmc->max_req_size = BUFFER_SIZE;
+	mmc->max_seg_size = mmc->max_req_size;
+
+	ret = request_irq(host->irq, goldfish_mmc_irq, 0, DRIVER_NAME, host);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed IRQ Adding goldfish MMC\n");
+		goto err_request_irq_failed;
+	}
+
+	host->dev = &pdev->dev;
+	platform_set_drvdata(pdev, host);
+
+	ret = device_create_file(&pdev->dev, &dev_attr_cover_switch);
+	if (ret)
+		dev_warn(mmc_dev(host->mmc),
+			 "Unable to create sysfs attributes\n");
+
+	GOLDFISH_MMC_WRITE(host, MMC_SET_BUFFER, host->phys_base);
+	GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE,
+			   MMC_STAT_END_OF_CMD | MMC_STAT_END_OF_DATA |
+			   MMC_STAT_STATE_CHANGE | MMC_STAT_CMD_TIMEOUT);
+
+	mmc_add_host(mmc);
+	return 0;
+
+err_request_irq_failed:
+	dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base,
+			  host->phys_base);
+dma_alloc_failed:
+	iounmap(host->reg_base);
+ioremap_failed:
+	mmc_free_host(host->mmc);
+err_alloc_host_failed:
+	return ret;
+}
+
+static int goldfish_mmc_remove(struct platform_device *pdev)
+{
+	struct goldfish_mmc_host *host = platform_get_drvdata(pdev);
+
+	BUG_ON(host == NULL);
+
+	mmc_remove_host(host->mmc);
+	free_irq(host->irq, host);
+	dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, host->phys_base);
+	iounmap(host->reg_base);
+	mmc_free_host(host->mmc);
+	return 0;
+}
+
+static struct platform_driver goldfish_mmc_driver = {
+	.probe		= goldfish_mmc_probe,
+	.remove		= goldfish_mmc_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+	},
+};
+
+module_platform_driver(goldfish_mmc_driver);
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/atmel-mci-regs.h

@@ -0,0 +1,164 @@
+/*
+ * Atmel MultiMedia Card Interface driver
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors
+ * Registers and bitfields marked with [2] are only available in MCI2
+ */
+
+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
+#define __DRIVERS_MMC_ATMEL_MCI_H__
+
+/* MCI Register Definitions */
+#define ATMCI_CR			0x0000	/* Control */
+# define ATMCI_CR_MCIEN			(  1 <<  0)	/* MCI Enable */
+# define ATMCI_CR_MCIDIS		(  1 <<  1)	/* MCI Disable */
+# define ATMCI_CR_PWSEN			(  1 <<  2)	/* Power Save Enable */
+# define ATMCI_CR_PWSDIS		(  1 <<  3)	/* Power Save Disable */
+# define ATMCI_CR_SWRST			(  1 <<  7)	/* Software Reset */
+#define ATMCI_MR			0x0004	/* Mode */
+# define ATMCI_MR_CLKDIV(x)		((x) <<  0)	/* Clock Divider */
+# define ATMCI_MR_PWSDIV(x)		((x) <<  8)	/* Power Saving Divider */
+# define ATMCI_MR_RDPROOF		(  1 << 11)	/* Read Proof */
+# define ATMCI_MR_WRPROOF		(  1 << 12)	/* Write Proof */
+# define ATMCI_MR_PDCFBYTE		(  1 << 13)	/* Force Byte Transfer */
+# define ATMCI_MR_PDCPADV		(  1 << 14)	/* Padding Value */
+# define ATMCI_MR_PDCMODE		(  1 << 15)	/* PDC-oriented Mode */
+# define ATMCI_MR_CLKODD(x)		((x) << 16)	/* LSB of Clock Divider */
+#define ATMCI_DTOR			0x0008	/* Data Timeout */
+# define ATMCI_DTOCYC(x)		((x) <<  0)	/* Data Timeout Cycles */
+# define ATMCI_DTOMUL(x)		((x) <<  4)	/* Data Timeout Multiplier */
+#define ATMCI_SDCR			0x000c	/* SD Card / SDIO */
+# define ATMCI_SDCSEL_SLOT_A		(  0 <<  0)	/* Select SD slot A */
+# define ATMCI_SDCSEL_SLOT_B		(  1 <<  0)	/* Select SD slot A */
+# define ATMCI_SDCSEL_MASK		(  3 <<  0)
+# define ATMCI_SDCBUS_1BIT		(  0 <<  6)	/* 1-bit data bus */
+# define ATMCI_SDCBUS_4BIT		(  2 <<  6)	/* 4-bit data bus */
+# define ATMCI_SDCBUS_8BIT		(  3 <<  6)	/* 8-bit data bus[2] */
+# define ATMCI_SDCBUS_MASK		(  3 <<  6)
+#define ATMCI_ARGR			0x0010	/* Command Argument */
+#define ATMCI_CMDR			0x0014	/* Command */
+# define ATMCI_CMDR_CMDNB(x)		((x) <<  0)	/* Command Opcode */
+# define ATMCI_CMDR_RSPTYP_NONE		(  0 <<  6)	/* No response */
+# define ATMCI_CMDR_RSPTYP_48BIT	(  1 <<  6)	/* 48-bit response */
+# define ATMCI_CMDR_RSPTYP_136BIT	(  2 <<  6)	/* 136-bit response */
+# define ATMCI_CMDR_SPCMD_INIT		(  1 <<  8)	/* Initialization command */
+# define ATMCI_CMDR_SPCMD_SYNC		(  2 <<  8)	/* Synchronized command */
+# define ATMCI_CMDR_SPCMD_INT		(  4 <<  8)	/* Interrupt command */
+# define ATMCI_CMDR_SPCMD_INTRESP	(  5 <<  8)	/* Interrupt response */
+# define ATMCI_CMDR_OPDCMD		(  1 << 11)	/* Open Drain */
+# define ATMCI_CMDR_MAXLAT_5CYC		(  0 << 12)	/* Max latency 5 cycles */
+# define ATMCI_CMDR_MAXLAT_64CYC	(  1 << 12)	/* Max latency 64 cycles */
+# define ATMCI_CMDR_START_XFER		(  1 << 16)	/* Start data transfer */
+# define ATMCI_CMDR_STOP_XFER		(  2 << 16)	/* Stop data transfer */
+# define ATMCI_CMDR_TRDIR_WRITE		(  0 << 18)	/* Write data */
+# define ATMCI_CMDR_TRDIR_READ		(  1 << 18)	/* Read data */
+# define ATMCI_CMDR_BLOCK		(  0 << 19)	/* Single-block transfer */
+# define ATMCI_CMDR_MULTI_BLOCK		(  1 << 19)	/* Multi-block transfer */
+# define ATMCI_CMDR_STREAM		(  2 << 19)	/* MMC Stream transfer */
+# define ATMCI_CMDR_SDIO_BYTE		(  4 << 19)	/* SDIO Byte transfer */
+# define ATMCI_CMDR_SDIO_BLOCK		(  5 << 19)	/* SDIO Block transfer */
+# define ATMCI_CMDR_SDIO_SUSPEND	(  1 << 24)	/* SDIO Suspend Command */
+# define ATMCI_CMDR_SDIO_RESUME		(  2 << 24)	/* SDIO Resume Command */
+#define ATMCI_BLKR			0x0018	/* Block */
+# define ATMCI_BCNT(x)			((x) <<  0)	/* Data Block Count */
+# define ATMCI_BLKLEN(x)		((x) << 16)	/* Data Block Length */
+#define ATMCI_CSTOR			0x001c	/* Completion Signal Timeout[2] */
+# define ATMCI_CSTOCYC(x)		((x) <<  0)	/* CST cycles */
+# define ATMCI_CSTOMUL(x)		((x) <<  4)	/* CST multiplier */
+#define ATMCI_RSPR			0x0020	/* Response 0 */
+#define ATMCI_RSPR1			0x0024	/* Response 1 */
+#define ATMCI_RSPR2			0x0028	/* Response 2 */
+#define ATMCI_RSPR3			0x002c	/* Response 3 */
+#define ATMCI_RDR			0x0030	/* Receive Data */
+#define ATMCI_TDR			0x0034	/* Transmit Data */
+#define ATMCI_SR			0x0040	/* Status */
+#define ATMCI_IER			0x0044	/* Interrupt Enable */
+#define ATMCI_IDR			0x0048	/* Interrupt Disable */
+#define ATMCI_IMR			0x004c	/* Interrupt Mask */
+# define ATMCI_CMDRDY			(  1 <<   0)	/* Command Ready */
+# define ATMCI_RXRDY			(  1 <<   1)	/* Receiver Ready */
+# define ATMCI_TXRDY			(  1 <<   2)	/* Transmitter Ready */
+# define ATMCI_BLKE			(  1 <<   3)	/* Data Block Ended */
+# define ATMCI_DTIP			(  1 <<   4)	/* Data Transfer In Progress */
+# define ATMCI_NOTBUSY			(  1 <<   5)	/* Data Not Busy */
+# define ATMCI_ENDRX			(  1 <<   6)    /* End of RX Buffer */
+# define ATMCI_ENDTX			(  1 <<   7)    /* End of TX Buffer */
+# define ATMCI_SDIOIRQA			(  1 <<   8)	/* SDIO IRQ in slot A */
+# define ATMCI_SDIOIRQB			(  1 <<   9)	/* SDIO IRQ in slot B */
+# define ATMCI_SDIOWAIT			(  1 <<  12)    /* SDIO Read Wait Operation Status */
+# define ATMCI_CSRCV			(  1 <<  13)    /* CE-ATA Completion Signal Received */
+# define ATMCI_RXBUFF			(  1 <<  14)    /* RX Buffer Full */
+# define ATMCI_TXBUFE			(  1 <<  15)    /* TX Buffer Empty */
+# define ATMCI_RINDE			(  1 <<  16)	/* Response Index Error */
+# define ATMCI_RDIRE			(  1 <<  17)	/* Response Direction Error */
+# define ATMCI_RCRCE			(  1 <<  18)	/* Response CRC Error */
+# define ATMCI_RENDE			(  1 <<  19)	/* Response End Bit Error */
+# define ATMCI_RTOE			(  1 <<  20)	/* Response Time-Out Error */
+# define ATMCI_DCRCE			(  1 <<  21)	/* Data CRC Error */
+# define ATMCI_DTOE			(  1 <<  22)	/* Data Time-Out Error */
+# define ATMCI_CSTOE			(  1 <<  23)    /* Completion Signal Time-out Error */
+# define ATMCI_BLKOVRE			(  1 <<  24)    /* DMA Block Overrun Error */
+# define ATMCI_DMADONE			(  1 <<  25)    /* DMA Transfer Done */
+# define ATMCI_FIFOEMPTY		(  1 <<  26)    /* FIFO Empty Flag */
+# define ATMCI_XFRDONE			(  1 <<  27)    /* Transfer Done Flag */
+# define ATMCI_ACKRCV			(  1 <<  28)    /* Boot Operation Acknowledge Received */
+# define ATMCI_ACKRCVE			(  1 <<  29)    /* Boot Operation Acknowledge Error */
+# define ATMCI_OVRE			(  1 <<  30)	/* RX Overrun Error */
+# define ATMCI_UNRE			(  1 <<  31)	/* TX Underrun Error */
+#define ATMCI_DMA			0x0050	/* DMA Configuration[2] */
+# define ATMCI_DMA_OFFSET(x)		((x) <<  0)	/* DMA Write Buffer Offset */
+# define ATMCI_DMA_CHKSIZE(x)		((x) <<  4)	/* DMA Channel Read and Write Chunk Size */
+# define ATMCI_DMAEN			(  1 <<  8)	/* DMA Hardware Handshaking Enable */
+#define ATMCI_CFG			0x0054	/* Configuration[2] */
+# define ATMCI_CFG_FIFOMODE_1DATA	(  1 <<  0)	/* MCI Internal FIFO control mode */
+# define ATMCI_CFG_FERRCTRL_COR		(  1 <<  4)	/* Flow Error flag reset control mode */
+# define ATMCI_CFG_HSMODE		(  1 <<  8)	/* High Speed Mode */
+# define ATMCI_CFG_LSYNC		(  1 << 12)	/* Synchronize on the last block */
+#define ATMCI_WPMR			0x00e4	/* Write Protection Mode[2] */
+# define ATMCI_WP_EN			(  1 <<  0)	/* WP Enable */
+# define ATMCI_WP_KEY			(0x4d4349 << 8)	/* WP Key */
+#define ATMCI_WPSR			0x00e8	/* Write Protection Status[2] */
+# define ATMCI_GET_WP_VS(x)		((x) & 0x0f)
+# define ATMCI_GET_WP_VSRC(x)		(((x) >> 8) & 0xffff)
+#define ATMCI_VERSION			0x00FC  /* Version */
+#define ATMCI_FIFO_APERTURE		0x0200	/* FIFO Aperture[2] */
+
+/* This is not including the FIFO Aperture on MCI2 */
+#define ATMCI_REGS_SIZE		0x100
+
+/* Register access macros */
+#define atmci_readl(port,reg)				\
+	__raw_readl((port)->regs + reg)
+#define atmci_writel(port,reg,value)			\
+	__raw_writel((value), (port)->regs + reg)
+
+/* On AVR chips the Peripheral DMA Controller is not connected to MCI. */
+#ifdef CONFIG_AVR32
+#	define ATMCI_PDC_CONNECTED	0
+#else
+#	define ATMCI_PDC_CONNECTED	1
+#endif
+
+/*
+ * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
+ * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
+ *
+ * This can be done by finding most significant bit set.
+ */
+static inline unsigned int atmci_convert_chksize(unsigned int maxburst)
+{
+	if (maxburst > 1)
+		return fls(maxburst) - 2;
+	else
+		return 0;
+}
+
+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */

drivers/mmc/host/bfin_sdh.c

@@ -0,0 +1,682 @@
+/*
+ * bfin_sdh.c - Analog Devices Blackfin SDH Controller
+ *
+ * Copyright (C) 2007-2009 Analog Device Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#define DRIVER_NAME	"bfin-sdh"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/mmc/host.h>
+#include <linux/proc_fs.h>
+#include <linux/gfp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+#include <asm/bfin_sdh.h>
+
+#if defined(CONFIG_BF51x) || defined(__ADSPBF60x__)
+#define bfin_read_SDH_CLK_CTL		bfin_read_RSI_CLK_CTL
+#define bfin_write_SDH_CLK_CTL		bfin_write_RSI_CLK_CTL
+#define bfin_write_SDH_ARGUMENT		bfin_write_RSI_ARGUMENT
+#define bfin_write_SDH_COMMAND		bfin_write_RSI_COMMAND
+#define bfin_write_SDH_DATA_TIMER	bfin_write_RSI_DATA_TIMER
+#define bfin_read_SDH_RESPONSE0		bfin_read_RSI_RESPONSE0
+#define bfin_read_SDH_RESPONSE1		bfin_read_RSI_RESPONSE1
+#define bfin_read_SDH_RESPONSE2		bfin_read_RSI_RESPONSE2
+#define bfin_read_SDH_RESPONSE3		bfin_read_RSI_RESPONSE3
+#define bfin_write_SDH_DATA_LGTH	bfin_write_RSI_DATA_LGTH
+#define bfin_read_SDH_DATA_CTL		bfin_read_RSI_DATA_CTL
+#define bfin_write_SDH_DATA_CTL		bfin_write_RSI_DATA_CTL
+#define bfin_read_SDH_DATA_CNT		bfin_read_RSI_DATA_CNT
+#define bfin_write_SDH_STATUS_CLR	bfin_write_RSI_STATUS_CLR
+#define bfin_read_SDH_E_STATUS		bfin_read_RSI_E_STATUS
+#define bfin_write_SDH_E_STATUS		bfin_write_RSI_E_STATUS
+#define bfin_read_SDH_STATUS		bfin_read_RSI_STATUS
+#define bfin_write_SDH_MASK0		bfin_write_RSI_MASK0
+#define bfin_write_SDH_E_MASK		bfin_write_RSI_E_MASK
+#define bfin_read_SDH_CFG		bfin_read_RSI_CFG
+#define bfin_write_SDH_CFG		bfin_write_RSI_CFG
+# if defined(__ADSPBF60x__)
+#  define bfin_read_SDH_BLK_SIZE	bfin_read_RSI_BLKSZ
+#  define bfin_write_SDH_BLK_SIZE	bfin_write_RSI_BLKSZ
+# else
+#  define bfin_read_SDH_PWR_CTL		bfin_read_RSI_PWR_CTL
+#  define bfin_write_SDH_PWR_CTL	bfin_write_RSI_PWR_CTL
+# endif
+#endif
+
+struct sdh_host {
+	struct mmc_host		*mmc;
+	spinlock_t		lock;
+	struct resource		*res;
+	void __iomem		*base;
+	int			irq;
+	int			stat_irq;
+	int			dma_ch;
+	int			dma_dir;
+	struct dma_desc_array	*sg_cpu;
+	dma_addr_t		sg_dma;
+	int			dma_len;
+
+	unsigned long		sclk;
+	unsigned int		imask;
+	unsigned int		power_mode;
+	unsigned int		clk_div;
+
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+};
+
+static struct bfin_sd_host *get_sdh_data(struct platform_device *pdev)
+{
+	return pdev->dev.platform_data;
+}
+
+static void sdh_stop_clock(struct sdh_host *host)
+{
+	bfin_write_SDH_CLK_CTL(bfin_read_SDH_CLK_CTL() & ~CLK_E);
+	SSYNC();
+}
+
+static void sdh_enable_stat_irq(struct sdh_host *host, unsigned int mask)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	host->imask |= mask;
+	bfin_write_SDH_MASK0(mask);
+	SSYNC();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void sdh_disable_stat_irq(struct sdh_host *host, unsigned int mask)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	host->imask &= ~mask;
+	bfin_write_SDH_MASK0(host->imask);
+	SSYNC();
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
+{
+	unsigned int length;
+	unsigned int data_ctl;
+	unsigned int dma_cfg;
+	unsigned int cycle_ns, timeout;
+
+	dev_dbg(mmc_dev(host->mmc), "%s enter flags: 0x%x\n", __func__, data->flags);
+	host->data = data;
+	data_ctl = 0;
+	dma_cfg = 0;
+
+	length = data->blksz * data->blocks;
+	bfin_write_SDH_DATA_LGTH(length);
+
+	if (data->flags & MMC_DATA_STREAM)
+		data_ctl |= DTX_MODE;
+
+	if (data->flags & MMC_DATA_READ)
+		data_ctl |= DTX_DIR;
+	/* Only supports power-of-2 block size */
+	if (data->blksz & (data->blksz - 1))
+		return -EINVAL;
+#ifndef RSI_BLKSZ
+	data_ctl |= ((ffs(data->blksz) - 1) << 4);
+#else
+        bfin_write_SDH_BLK_SIZE(data->blksz);
+#endif
+
+	bfin_write_SDH_DATA_CTL(data_ctl);
+	/* the time of a host clock period in ns */
+	cycle_ns = 1000000000 / (host->sclk / (2 * (host->clk_div + 1)));
+	timeout = data->timeout_ns / cycle_ns;
+	timeout += data->timeout_clks;
+	bfin_write_SDH_DATA_TIMER(timeout);
+	SSYNC();
+
+	if (data->flags & MMC_DATA_READ) {
+		host->dma_dir = DMA_FROM_DEVICE;
+		dma_cfg |= WNR;
+	} else
+		host->dma_dir = DMA_TO_DEVICE;
+
+	sdh_enable_stat_irq(host, (DAT_CRC_FAIL | DAT_TIME_OUT | DAT_END));
+	host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma_dir);
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
+	dma_cfg |= DMAFLOW_ARRAY | RESTART | WDSIZE_32 | DMAEN;
+# ifdef RSI_BLKSZ
+	dma_cfg |= PSIZE_32 | NDSIZE_3;
+# else
+	dma_cfg |= NDSIZE_5;
+# endif
+	{
+		struct scatterlist *sg;
+		int i;
+		for_each_sg(data->sg, sg, host->dma_len, i) {
+			host->sg_cpu[i].start_addr = sg_dma_address(sg);
+			host->sg_cpu[i].cfg = dma_cfg;
+			host->sg_cpu[i].x_count = sg_dma_len(sg) / 4;
+			host->sg_cpu[i].x_modify = 4;
+			dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, "
+				"cfg:0x%lx, x_count:0x%lx, x_modify:0x%lx\n",
+				i, host->sg_cpu[i].start_addr,
+				host->sg_cpu[i].cfg, host->sg_cpu[i].x_count,
+				host->sg_cpu[i].x_modify);
+		}
+	}
+	flush_dcache_range((unsigned int)host->sg_cpu,
+		(unsigned int)host->sg_cpu +
+			host->dma_len * sizeof(struct dma_desc_array));
+	/* Set the last descriptor to stop mode */
+	host->sg_cpu[host->dma_len - 1].cfg &= ~(DMAFLOW | NDSIZE);
+	host->sg_cpu[host->dma_len - 1].cfg |= DI_EN;
+
+	set_dma_curr_desc_addr(host->dma_ch, (unsigned long *)host->sg_dma);
+	set_dma_x_count(host->dma_ch, 0);
+	set_dma_x_modify(host->dma_ch, 0);
+	SSYNC();
+	set_dma_config(host->dma_ch, dma_cfg);
+#elif defined(CONFIG_BF51x)
+	/* RSI DMA doesn't work in array mode */
+	dma_cfg |= WDSIZE_32 | DMAEN;
+	set_dma_start_addr(host->dma_ch, sg_dma_address(&data->sg[0]));
+	set_dma_x_count(host->dma_ch, length / 4);
+	set_dma_x_modify(host->dma_ch, 4);
+	SSYNC();
+	set_dma_config(host->dma_ch, dma_cfg);
+#endif
+	bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
+
+	SSYNC();
+
+	dev_dbg(mmc_dev(host->mmc), "%s exit\n", __func__);
+	return 0;
+}
+
+static void sdh_start_cmd(struct sdh_host *host, struct mmc_command *cmd)
+{
+	unsigned int sdh_cmd;
+	unsigned int stat_mask;
+
+	dev_dbg(mmc_dev(host->mmc), "%s enter cmd: 0x%p\n", __func__, cmd);
+	WARN_ON(host->cmd != NULL);
+	host->cmd = cmd;
+
+	sdh_cmd = 0;
+	stat_mask = 0;
+
+	sdh_cmd |= cmd->opcode;
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		sdh_cmd |= CMD_RSP;
+		stat_mask |= CMD_RESP_END;
+	} else {
+		stat_mask |= CMD_SENT;
+	}
+
+	if (cmd->flags & MMC_RSP_136)
+		sdh_cmd |= CMD_L_RSP;
+
+	stat_mask |= CMD_CRC_FAIL | CMD_TIME_OUT;
+
+	sdh_enable_stat_irq(host, stat_mask);
+
+	bfin_write_SDH_ARGUMENT(cmd->arg);
+	bfin_write_SDH_COMMAND(sdh_cmd | CMD_E);
+	bfin_write_SDH_CLK_CTL(bfin_read_SDH_CLK_CTL() | CLK_E);
+	SSYNC();
+}
+
+static void sdh_finish_request(struct sdh_host *host, struct mmc_request *mrq)
+{
+	dev_dbg(mmc_dev(host->mmc), "%s enter\n", __func__);
+	host->mrq = NULL;
+	host->cmd = NULL;
+	host->data = NULL;
+	mmc_request_done(host->mmc, mrq);
+}
+
+static int sdh_cmd_done(struct sdh_host *host, unsigned int stat)
+{
+	struct mmc_command *cmd = host->cmd;
+	int ret = 0;
+
+	dev_dbg(mmc_dev(host->mmc), "%s enter cmd: %p\n", __func__, cmd);
+	if (!cmd)
+		return 0;
+
+	host->cmd = NULL;
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		cmd->resp[0] = bfin_read_SDH_RESPONSE0();
+		if (cmd->flags & MMC_RSP_136) {
+			cmd->resp[1] = bfin_read_SDH_RESPONSE1();
+			cmd->resp[2] = bfin_read_SDH_RESPONSE2();
+			cmd->resp[3] = bfin_read_SDH_RESPONSE3();
+		}
+	}
+	if (stat & CMD_TIME_OUT)
+		cmd->error = -ETIMEDOUT;
+	else if (stat & CMD_CRC_FAIL && cmd->flags & MMC_RSP_CRC)
+		cmd->error = -EILSEQ;
+
+	sdh_disable_stat_irq(host, (CMD_SENT | CMD_RESP_END | CMD_TIME_OUT | CMD_CRC_FAIL));
+
+	if (host->data && !cmd->error) {
+		if (host->data->flags & MMC_DATA_WRITE) {
+			ret = sdh_setup_data(host, host->data);
+			if (ret)
+				return 0;
+		}
+
+		sdh_enable_stat_irq(host, DAT_END | RX_OVERRUN | TX_UNDERRUN | DAT_TIME_OUT);
+	} else
+		sdh_finish_request(host, host->mrq);
+
+	return 1;
+}
+
+static int sdh_data_done(struct sdh_host *host, unsigned int stat)
+{
+	struct mmc_data *data = host->data;
+
+	dev_dbg(mmc_dev(host->mmc), "%s enter stat: 0x%x\n", __func__, stat);
+	if (!data)
+		return 0;
+
+	disable_dma(host->dma_ch);
+	dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+		     host->dma_dir);
+
+	if (stat & DAT_TIME_OUT)
+		data->error = -ETIMEDOUT;
+	else if (stat & DAT_CRC_FAIL)
+		data->error = -EILSEQ;
+	else if (stat & (RX_OVERRUN | TX_UNDERRUN))
+		data->error = -EIO;
+
+	if (!data->error)
+		data->bytes_xfered = data->blocks * data->blksz;
+	else
+		data->bytes_xfered = 0;
+
+	bfin_write_SDH_STATUS_CLR(DAT_END_STAT | DAT_TIMEOUT_STAT | \
+			DAT_CRC_FAIL_STAT | DAT_BLK_END_STAT | RX_OVERRUN | TX_UNDERRUN);
+	bfin_write_SDH_DATA_CTL(0);
+	SSYNC();
+
+	host->data = NULL;
+	if (host->mrq->stop) {
+		sdh_stop_clock(host);
+		sdh_start_cmd(host, host->mrq->stop);
+	} else {
+		sdh_finish_request(host, host->mrq);
+	}
+
+	return 1;
+}
+
+static void sdh_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct sdh_host *host = mmc_priv(mmc);
+	int ret = 0;
+
+	dev_dbg(mmc_dev(host->mmc), "%s enter, mrp:%p, cmd:%p\n", __func__, mrq, mrq->cmd);
+	WARN_ON(host->mrq != NULL);
+
+	spin_lock(&host->lock);
+	host->mrq = mrq;
+	host->data = mrq->data;
+
+	if (mrq->data && mrq->data->flags & MMC_DATA_READ) {
+		ret = sdh_setup_data(host, mrq->data);
+		if (ret)
+			goto data_err;
+	}
+
+	sdh_start_cmd(host, mrq->cmd);
+data_err:
+	spin_unlock(&host->lock);
+}
+
+static void sdh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdh_host *host;
+	u16 clk_ctl = 0;
+#ifndef RSI_BLKSZ
+	u16 pwr_ctl = 0;
+#endif
+	u16 cfg;
+	host = mmc_priv(mmc);
+
+	spin_lock(&host->lock);
+
+	cfg = bfin_read_SDH_CFG();
+	cfg |= MWE;
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_4:
+#ifndef RSI_BLKSZ
+		cfg &= ~PD_SDDAT3;
+#endif
+		cfg |= PUP_SDDAT3;
+		/* Enable 4 bit SDIO */
+		cfg |= SD4E;
+		clk_ctl |= WIDE_BUS_4;
+		break;
+	case MMC_BUS_WIDTH_8:
+#ifndef RSI_BLKSZ
+		cfg &= ~PD_SDDAT3;
+#endif
+		cfg |= PUP_SDDAT3;
+		/* Disable 4 bit SDIO */
+		cfg &= ~SD4E;
+		clk_ctl |= BYTE_BUS_8;
+		break;
+	default:
+		cfg &= ~PUP_SDDAT3;
+		/* Disable 4 bit SDIO */
+		cfg &= ~SD4E;
+	}
+	bfin_write_SDH_CFG(cfg);
+
+	host->power_mode = ios->power_mode;
+#ifndef RSI_BLKSZ
+	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
+		pwr_ctl |= ROD_CTL;
+# ifndef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
+		pwr_ctl |= SD_CMD_OD;
+# endif
+	}
+
+	if (ios->power_mode != MMC_POWER_OFF)
+		pwr_ctl |= PWR_ON;
+	else
+		pwr_ctl &= ~PWR_ON;
+
+	bfin_write_SDH_PWR_CTL(pwr_ctl);
+#else
+# ifndef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
+	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
+		cfg |= SD_CMD_OD;
+	else
+		cfg &= ~SD_CMD_OD;
+# endif
+
+	if (ios->power_mode != MMC_POWER_OFF)
+		cfg |= PWR_ON;
+	else
+		cfg &= ~PWR_ON;
+
+	bfin_write_SDH_CFG(cfg);
+#endif
+	SSYNC();
+
+	if (ios->power_mode == MMC_POWER_ON && ios->clock) {
+		unsigned char clk_div;
+		clk_div = (get_sclk() / ios->clock - 1) / 2;
+		clk_div = min_t(unsigned char, clk_div, 0xFF);
+		clk_ctl |= clk_div;
+		clk_ctl |= CLK_E;
+		host->clk_div = clk_div;
+		bfin_write_SDH_CLK_CTL(clk_ctl);
+	} else
+		sdh_stop_clock(host);
+
+	/* set up sdh interrupt mask*/
+	if (ios->power_mode == MMC_POWER_ON)
+		bfin_write_SDH_MASK0(DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL |
+			RX_OVERRUN | TX_UNDERRUN | CMD_SENT | CMD_RESP_END |
+			CMD_TIME_OUT | CMD_CRC_FAIL);
+	else
+		bfin_write_SDH_MASK0(0);
+	SSYNC();
+
+	spin_unlock(&host->lock);
+
+	dev_dbg(mmc_dev(host->mmc), "SDH: clk_div = 0x%x actual clock:%ld expected clock:%d\n",
+		host->clk_div,
+		host->clk_div ? get_sclk() / (2 * (host->clk_div + 1)) : 0,
+		ios->clock);
+}
+
+static const struct mmc_host_ops sdh_ops = {
+	.request	= sdh_request,
+	.set_ios	= sdh_set_ios,
+};
+
+static irqreturn_t sdh_dma_irq(int irq, void *devid)
+{
+	struct sdh_host *host = devid;
+
+	dev_dbg(mmc_dev(host->mmc), "%s enter, irq_stat: 0x%04lx\n", __func__,
+		get_dma_curr_irqstat(host->dma_ch));
+	clear_dma_irqstat(host->dma_ch);
+	SSYNC();
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sdh_stat_irq(int irq, void *devid)
+{
+	struct sdh_host *host = devid;
+	unsigned int status;
+	int handled = 0;
+
+	dev_dbg(mmc_dev(host->mmc), "%s enter\n", __func__);
+
+	spin_lock(&host->lock);
+
+	status = bfin_read_SDH_E_STATUS();
+	if (status & SD_CARD_DET) {
+		mmc_detect_change(host->mmc, 0);
+		bfin_write_SDH_E_STATUS(SD_CARD_DET);
+	}
+	status = bfin_read_SDH_STATUS();
+	if (status & (CMD_SENT | CMD_RESP_END | CMD_TIME_OUT | CMD_CRC_FAIL)) {
+		handled |= sdh_cmd_done(host, status);
+		bfin_write_SDH_STATUS_CLR(CMD_SENT_STAT | CMD_RESP_END_STAT | \
+				CMD_TIMEOUT_STAT | CMD_CRC_FAIL_STAT);
+		SSYNC();
+	}
+
+	status = bfin_read_SDH_STATUS();
+	if (status & (DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN | TX_UNDERRUN))
+		handled |= sdh_data_done(host, status);
+
+	spin_unlock(&host->lock);
+
+	dev_dbg(mmc_dev(host->mmc), "%s exit\n\n", __func__);
+
+	return IRQ_RETVAL(handled);
+}
+
+static void sdh_reset(void)
+{
+#if defined(CONFIG_BF54x)
+	/* Secure Digital Host shares DMA with Nand controller */
+	bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
+#endif
+
+	bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
+	SSYNC();
+
+	/* Disable card inserting detection pin. set MMC_CAP_NEEDS_POLL, and
+	 * mmc stack will do the detection.
+	 */
+	bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3));
+	SSYNC();
+}
+
+static int sdh_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct sdh_host *host;
+	struct bfin_sd_host *drv_data = get_sdh_data(pdev);
+	int ret;
+
+	if (!drv_data) {
+		dev_err(&pdev->dev, "missing platform driver data\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	mmc = mmc_alloc_host(sizeof(struct sdh_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	mmc->ops = &sdh_ops;
+#if defined(CONFIG_BF51x)
+	mmc->max_segs = 1;
+#else
+	mmc->max_segs = PAGE_SIZE / sizeof(struct dma_desc_array);
+#endif
+#ifdef RSI_BLKSZ
+	mmc->max_seg_size = -1;
+#else
+	mmc->max_seg_size = 1 << 16;
+#endif
+	mmc->max_blk_size = 1 << 11;
+	mmc->max_blk_count = 1 << 11;
+	mmc->max_req_size = PAGE_SIZE;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->f_max = get_sclk();
+	mmc->f_min = mmc->f_max >> 9;
+	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NEEDS_POLL;
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->sclk = get_sclk();
+
+	spin_lock_init(&host->lock);
+	host->irq = drv_data->irq_int0;
+	host->dma_ch = drv_data->dma_chan;
+
+	ret = request_dma(host->dma_ch, DRIVER_NAME "DMA");
+	if (ret) {
+		dev_err(&pdev->dev, "unable to request DMA channel\n");
+		goto out1;
+	}
+
+	ret = set_dma_callback(host->dma_ch, sdh_dma_irq, host);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to request DMA irq\n");
+		goto out2;
+	}
+
+	host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
+	if (host->sg_cpu == NULL) {
+		ret = -ENOMEM;
+		goto out2;
+	}
+
+	platform_set_drvdata(pdev, mmc);
+
+	ret = request_irq(host->irq, sdh_stat_irq, 0, "SDH Status IRQ", host);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to request status irq\n");
+		goto out3;
+	}
+
+	ret = peripheral_request_list(drv_data->pin_req, DRIVER_NAME);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to request peripheral pins\n");
+		goto out4;
+	}
+
+	sdh_reset();
+
+	mmc_add_host(mmc);
+	return 0;
+
+out4:
+	free_irq(host->irq, host);
+out3:
+	mmc_remove_host(mmc);
+	dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+out2:
+	free_dma(host->dma_ch);
+out1:
+	mmc_free_host(mmc);
+ out:
+	return ret;
+}
+
+static int sdh_remove(struct platform_device *pdev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(pdev);
+
+	if (mmc) {
+		struct sdh_host *host = mmc_priv(mmc);
+
+		mmc_remove_host(mmc);
+
+		sdh_stop_clock(host);
+		free_irq(host->irq, host);
+		free_dma(host->dma_ch);
+		dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+
+		mmc_free_host(mmc);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sdh_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct bfin_sd_host *drv_data = get_sdh_data(dev);
+
+	peripheral_free_list(drv_data->pin_req);
+
+	return 0;
+}
+
+static int sdh_resume(struct platform_device *dev)
+{
+	struct bfin_sd_host *drv_data = get_sdh_data(dev);
+	int ret = 0;
+
+	ret = peripheral_request_list(drv_data->pin_req, DRIVER_NAME);
+	if (ret) {
+		dev_err(&dev->dev, "unable to request peripheral pins\n");
+		return ret;
+	}
+
+	sdh_reset();
+	return ret;
+}
+#else
+# define sdh_suspend NULL
+# define sdh_resume  NULL
+#endif
+
+static struct platform_driver sdh_driver = {
+	.probe   = sdh_probe,
+	.remove  = sdh_remove,
+	.suspend = sdh_suspend,
+	.resume  = sdh_resume,
+	.driver  = {
+		.name = DRIVER_NAME,
+	},
+};
+
+module_platform_driver(sdh_driver);
+
+MODULE_DESCRIPTION("Blackfin Secure Digital Host Driver");
+MODULE_AUTHOR("Cliff Cai, Roy Huang");
+MODULE_LICENSE("GPL");

drivers/mmc/host/cb710-mmc.c

@@ -0,0 +1,780 @@
+/*
+ *  cb710/mmc.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "cb710-mmc.h"
+
+static const u8 cb710_clock_divider_log2[8] = {
+/*	1, 2, 4, 8, 16, 32, 128, 512 */
+	0, 1, 2, 3,  4,  5,   7,   9
+};
+#define CB710_MAX_DIVIDER_IDX	\
+	(ARRAY_SIZE(cb710_clock_divider_log2) - 1)
+
+static const u8 cb710_src_freq_mhz[16] = {
+	33, 10, 20, 25, 30, 35, 40, 45,
+	50, 55, 60, 65, 70, 75, 80, 85
+};
+
+static void cb710_mmc_select_clock_divider(struct mmc_host *mmc, int hz)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev;
+	u32 src_freq_idx;
+	u32 divider_idx;
+	int src_hz;
+
+	/* on CB710 in HP nx9500:
+	 *   src_freq_idx == 0
+	 *   indexes 1-7 work as written in the table
+	 *   indexes 0,8-15 give no clock output
+	 */
+	pci_read_config_dword(pdev, 0x48, &src_freq_idx);
+	src_freq_idx = (src_freq_idx >> 16) & 0xF;
+	src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000;
+
+	for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) {
+		if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx])
+			break;
+	}
+
+	if (src_freq_idx)
+		divider_idx |= 0x8;
+	else if (divider_idx == 0)
+		divider_idx = 1;
+
+	cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28);
+
+	dev_dbg(cb710_slot_dev(slot),
+		"clock set to %d Hz, wanted %d Hz; src_freq_idx = %d, divider_idx = %d|%d\n",
+		src_hz >> cb710_clock_divider_log2[divider_idx & 7],
+		hz, src_freq_idx, divider_idx & 7, divider_idx & 8);
+}
+
+static void __cb710_mmc_enable_irq(struct cb710_slot *slot,
+	unsigned short enable, unsigned short mask)
+{
+	/* clear global IE
+	 * - it gets set later if any interrupt sources are enabled */
+	mask |= CB710_MMC_IE_IRQ_ENABLE;
+
+	/* look like interrupt is fired whenever
+	 * WORD[0x0C] & WORD[0x10] != 0;
+	 * -> bit 15 port 0x0C seems to be global interrupt enable
+	 */
+
+	enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT)
+		& ~mask) | enable;
+
+	if (enable)
+		enable |= CB710_MMC_IE_IRQ_ENABLE;
+
+	cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable);
+}
+
+static void cb710_mmc_enable_irq(struct cb710_slot *slot,
+	unsigned short enable, unsigned short mask)
+{
+	struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot));
+	unsigned long flags;
+
+	spin_lock_irqsave(&reader->irq_lock, flags);
+	/* this is the only thing irq_lock protects */
+	__cb710_mmc_enable_irq(slot, enable, mask);
+	spin_unlock_irqrestore(&reader->irq_lock, flags);
+}
+
+static void cb710_mmc_reset_events(struct cb710_slot *slot)
+{
+	cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF);
+	cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF);
+	cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF);
+}
+
+static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable)
+{
+	if (enable)
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+			CB710_MMC_C1_4BIT_DATA_BUS, 0);
+	else
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+			0, CB710_MMC_C1_4BIT_DATA_BUS);
+}
+
+static int cb710_check_event(struct cb710_slot *slot, u8 what)
+{
+	u16 status;
+
+	status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT);
+
+	if (status & CB710_MMC_S0_FIFO_UNDERFLOW) {
+		/* it is just a guess, so log it */
+		dev_dbg(cb710_slot_dev(slot),
+			"CHECK : ignoring bit 6 in status %04X\n", status);
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+			CB710_MMC_S0_FIFO_UNDERFLOW);
+		status &= ~CB710_MMC_S0_FIFO_UNDERFLOW;
+	}
+
+	if (status & CB710_MMC_STATUS_ERROR_EVENTS) {
+		dev_dbg(cb710_slot_dev(slot),
+			"CHECK : returning EIO on status %04X\n", status);
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF);
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+			CB710_MMC_S1_RESET);
+		return -EIO;
+	}
+
+	/* 'what' is a bit in MMC_STATUS1 */
+	if ((status >> 8) & what) {
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int cb710_wait_for_event(struct cb710_slot *slot, u8 what)
+{
+	int err = 0;
+	unsigned limit = 2000000;	/* FIXME: real timeout */
+
+#ifdef CONFIG_CB710_DEBUG
+	u32 e, x;
+	e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+	while (!(err = cb710_check_event(slot, what))) {
+		if (!--limit) {
+			cb710_dump_regs(cb710_slot_to_chip(slot),
+				CB710_DUMP_REGS_MMC);
+			err = -ETIMEDOUT;
+			break;
+		}
+		udelay(1);
+	}
+
+#ifdef CONFIG_CB710_DEBUG
+	x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+	limit = 2000000 - limit;
+	if (limit > 100)
+		dev_dbg(cb710_slot_dev(slot),
+			"WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n",
+			limit, what, e, x);
+#endif
+	return err < 0 ? err : 0;
+}
+
+
+static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
+{
+	unsigned limit = 500000;	/* FIXME: real timeout */
+	int err = 0;
+
+#ifdef CONFIG_CB710_DEBUG
+	u32 e, x;
+	e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+	while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) {
+		if (!--limit) {
+			cb710_dump_regs(cb710_slot_to_chip(slot),
+				CB710_DUMP_REGS_MMC);
+			err = -ETIMEDOUT;
+			break;
+		}
+		udelay(1);
+	}
+
+#ifdef CONFIG_CB710_DEBUG
+	x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+	limit = 500000 - limit;
+	if (limit > 100)
+		dev_dbg(cb710_slot_dev(slot),
+			"WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n",
+			limit, mask, e, x);
+#endif
+	return err;
+}
+
+static void cb710_mmc_set_transfer_size(struct cb710_slot *slot,
+	size_t count, size_t blocksize)
+{
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT,
+		((count - 1) << 16)|(blocksize - 1));
+
+	dev_vdbg(cb710_slot_dev(slot), "set up for %zu block%s of %zu bytes\n",
+		count, count == 1 ? "" : "s", blocksize);
+}
+
+static void cb710_mmc_fifo_hack(struct cb710_slot *slot)
+{
+	/* without this, received data is prepended with 8-bytes of zeroes */
+	u32 r1, r2;
+	int ok = 0;
+
+	r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+	r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+	if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT)
+	    & CB710_MMC_S0_FIFO_UNDERFLOW) {
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+			CB710_MMC_S0_FIFO_UNDERFLOW);
+		ok = 1;
+	}
+
+	dev_dbg(cb710_slot_dev(slot),
+		"FIFO-read-hack: expected STATUS0 bit was %s\n",
+		ok ? "set." : "NOT SET!");
+	dev_dbg(cb710_slot_dev(slot),
+		"FIFO-read-hack: dwords ignored: %08X %08X - %s\n",
+		r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok");
+}
+
+static int cb710_mmc_receive_pio(struct cb710_slot *slot,
+	struct sg_mapping_iter *miter, size_t dw_count)
+{
+	if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) {
+		int err = cb710_wait_for_event(slot,
+			CB710_MMC_S1_PIO_TRANSFER_DONE);
+		if (err)
+			return err;
+	}
+
+	cb710_sg_dwiter_write_from_io(miter,
+		slot->iobase + CB710_MMC_DATA_PORT, dw_count);
+
+	return 0;
+}
+
+static bool cb710_is_transfer_size_supported(struct mmc_data *data)
+{
+	return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8));
+}
+
+static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
+{
+	struct sg_mapping_iter miter;
+	size_t len, blocks = data->blocks;
+	int err = 0;
+
+	/* TODO: I don't know how/if the hardware handles non-16B-boundary blocks
+	 * except single 8B block */
+	if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
+		return -EINVAL;
+
+	sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG);
+
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+		15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+	cb710_mmc_fifo_hack(slot);
+
+	while (blocks-- > 0) {
+		len = data->blksz;
+
+		while (len >= 16) {
+			err = cb710_mmc_receive_pio(slot, &miter, 4);
+			if (err)
+				goto out;
+			len -= 16;
+		}
+
+		if (!len)
+			continue;
+
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+			len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+		len = (len >= 8) ? 4 : 2;
+		err = cb710_mmc_receive_pio(slot, &miter, len);
+		if (err)
+			goto out;
+	}
+out:
+	sg_miter_stop(&miter);
+	return err;
+}
+
+static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
+{
+	struct sg_mapping_iter miter;
+	size_t len, blocks = data->blocks;
+	int err = 0;
+
+	/* TODO: I don't know how/if the hardware handles multiple
+	 * non-16B-boundary blocks */
+	if (unlikely(data->blocks > 1 && data->blksz & 15))
+		return -EINVAL;
+
+	sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
+
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+		0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+	while (blocks-- > 0) {
+		len = (data->blksz + 15) >> 4;
+		do {
+			if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT)
+			    & CB710_MMC_S2_FIFO_EMPTY)) {
+				err = cb710_wait_for_event(slot,
+					CB710_MMC_S1_PIO_TRANSFER_DONE);
+				if (err)
+					goto out;
+			}
+			cb710_sg_dwiter_read_to_io(&miter,
+				slot->iobase + CB710_MMC_DATA_PORT, 4);
+		} while (--len);
+	}
+out:
+	sg_miter_stop(&miter);
+	return err;
+}
+
+static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader,
+	struct mmc_command *cmd)
+{
+	unsigned int flags = cmd->flags;
+	u16 cb_flags = 0;
+
+	/* Windows driver returned 0 for commands for which no response
+	 * is expected. It happened that there were only two such commands
+	 * used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might
+	 * as well be a bug in that driver.
+	 *
+	 * Original driver set bit 14 for MMC/SD application
+	 * commands. There's no difference 'on the wire' and
+	 * it apparently works without it anyway.
+	 */
+
+	switch (flags & MMC_CMD_MASK) {
+	case MMC_CMD_AC:	cb_flags = CB710_MMC_CMD_AC;	break;
+	case MMC_CMD_ADTC:	cb_flags = CB710_MMC_CMD_ADTC;	break;
+	case MMC_CMD_BC:	cb_flags = CB710_MMC_CMD_BC;	break;
+	case MMC_CMD_BCR:	cb_flags = CB710_MMC_CMD_BCR;	break;
+	}
+
+	if (flags & MMC_RSP_BUSY)
+		cb_flags |= CB710_MMC_RSP_BUSY;
+
+	cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT;
+
+	if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
+		cb_flags |= CB710_MMC_DATA_READ;
+
+	if (flags & MMC_RSP_PRESENT) {
+		/* Windows driver set 01 at bits 4,3 except for
+		 * MMC_SET_BLOCKLEN where it set 10. Maybe the
+		 * hardware can do something special about this
+		 * command? The original driver looks buggy/incomplete
+		 * anyway so we ignore this for now.
+		 *
+		 * I assume that 00 here means no response is expected.
+		 */
+		cb_flags |= CB710_MMC_RSP_PRESENT;
+
+		if (flags & MMC_RSP_136)
+			cb_flags |= CB710_MMC_RSP_136;
+		if (!(flags & MMC_RSP_CRC))
+			cb_flags |= CB710_MMC_RSP_NO_CRC;
+	}
+
+	return cb_flags;
+}
+
+static void cb710_receive_response(struct cb710_slot *slot,
+	struct mmc_command *cmd)
+{
+	unsigned rsp_opcode, wanted_opcode;
+
+	/* Looks like final byte with CRC is always stripped (same as SDHCI) */
+	if (cmd->flags & MMC_RSP_136) {
+		u32 resp[4];
+
+		resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT);
+		resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT);
+		resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT);
+		resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+		rsp_opcode = resp[0] >> 24;
+
+		cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24);
+		cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24);
+		cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24);
+		cmd->resp[3] = (resp[3] << 8);
+	} else {
+		rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F;
+		cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+	}
+
+	wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F;
+	if (rsp_opcode != wanted_opcode)
+		cmd->error = -EILSEQ;
+}
+
+static int cb710_mmc_transfer_data(struct cb710_slot *slot,
+	struct mmc_data *data)
+{
+	int error, to;
+
+	if (data->flags & MMC_DATA_READ)
+		error = cb710_mmc_receive(slot, data);
+	else
+		error = cb710_mmc_send(slot, data);
+
+	to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE);
+	if (!error)
+		error = to;
+
+	if (!error)
+		data->bytes_xfered = data->blksz * data->blocks;
+	return error;
+}
+
+static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	struct mmc_data *data = cmd->data;
+
+	u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd);
+	dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd);
+
+	if (data) {
+		if (!cb710_is_transfer_size_supported(data)) {
+			data->error = -EINVAL;
+			return -1;
+		}
+		cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz);
+	}
+
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10);
+	cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd);
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg);
+	cb710_mmc_reset_events(slot);
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0);
+
+	cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT);
+	if (cmd->error)
+		return -1;
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		cb710_receive_response(slot, cmd);
+		if (cmd->error)
+			return -1;
+	}
+
+	if (data)
+		data->error = cb710_mmc_transfer_data(slot, data);
+	return 0;
+}
+
+static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+	WARN_ON(reader->mrq != NULL);
+
+	reader->mrq = mrq;
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+
+	if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop)
+		cb710_mmc_command(mmc, mrq->stop);
+
+	tasklet_schedule(&reader->finish_req_tasklet);
+}
+
+static int cb710_mmc_powerup(struct cb710_slot *slot)
+{
+#ifdef CONFIG_CB710_DEBUG
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+#endif
+	int err;
+
+	/* a lot of magic for now */
+	dev_dbg(cb710_slot_dev(slot), "bus powerup\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(1);
+	dev_dbg(cb710_slot_dev(slot), "after delay 1\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(1);
+	dev_dbg(cb710_slot_dev(slot), "after delay 2\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(2);
+	dev_dbg(cb710_slot_dev(slot), "after delay 3\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	/* This port behaves weird: quick byte reads of 0x08,0x09 return
+	 * 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when
+	 * read/written from userspace...  What am I missing here?
+	 * (it doesn't depend on write-to-read delay) */
+	cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n");
+
+	return cb710_check_event(slot, 0);
+}
+
+static void cb710_mmc_powerdown(struct cb710_slot *slot)
+{
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80);
+}
+
+static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	int err;
+
+	cb710_mmc_select_clock_divider(mmc, ios->clock);
+
+	if (ios->power_mode != reader->last_power_mode)
+	switch (ios->power_mode) {
+	case MMC_POWER_ON:
+		err = cb710_mmc_powerup(slot);
+		if (err) {
+			dev_warn(cb710_slot_dev(slot),
+				"powerup failed (%d)- retrying\n", err);
+			cb710_mmc_powerdown(slot);
+			udelay(1);
+			err = cb710_mmc_powerup(slot);
+			if (err)
+				dev_warn(cb710_slot_dev(slot),
+					"powerup retry failed (%d) - expect errors\n",
+					err);
+		}
+		reader->last_power_mode = MMC_POWER_ON;
+		break;
+	case MMC_POWER_OFF:
+		cb710_mmc_powerdown(slot);
+		reader->last_power_mode = MMC_POWER_OFF;
+		break;
+	case MMC_POWER_UP:
+	default:
+		/* ignore */;
+	}
+
+	cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1);
+
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+}
+
+static int cb710_mmc_get_ro(struct mmc_host *mmc)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+
+	return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+		& CB710_MMC_S3_WRITE_PROTECTED;
+}
+
+static int cb710_mmc_get_cd(struct mmc_host *mmc)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+
+	return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+		& CB710_MMC_S3_CARD_DETECTED;
+}
+
+static int cb710_mmc_irq_handler(struct cb710_slot *slot)
+{
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	u32 status, config1, config2, irqen;
+
+	status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+	irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT);
+	config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT);
+	config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT);
+
+	dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, "
+		"ie: %08X, c2: %08X, c1: %08X\n",
+		status, irqen, config2, config1);
+
+	if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) {
+		/* ack the event */
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+			CB710_MMC_S1_CARD_CHANGED);
+		if ((irqen & CB710_MMC_IE_CISTATUS_MASK)
+		    == CB710_MMC_IE_CISTATUS_MASK)
+			mmc_detect_change(mmc, HZ/5);
+	} else {
+		dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n");
+		spin_lock(&reader->irq_lock);
+		__cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK);
+		spin_unlock(&reader->irq_lock);
+	}
+
+	return 1;
+}
+
+static void cb710_mmc_finish_request_tasklet(unsigned long data)
+{
+	struct mmc_host *mmc = (void *)data;
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	struct mmc_request *mrq = reader->mrq;
+
+	reader->mrq = NULL;
+	mmc_request_done(mmc, mrq);
+}
+
+static const struct mmc_host_ops cb710_mmc_host = {
+	.request = cb710_mmc_request,
+	.set_ios = cb710_mmc_set_ios,
+	.get_ro = cb710_mmc_get_ro,
+	.get_cd = cb710_mmc_get_cd,
+};
+
+#ifdef CONFIG_PM
+
+static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	return 0;
+}
+
+static int cb710_mmc_resume(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static int cb710_mmc_init(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+	struct mmc_host *mmc;
+	struct cb710_mmc_reader *reader;
+	int err;
+	u32 val;
+
+	mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot));
+	if (!mmc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, mmc);
+
+	/* harmless (maybe) magic */
+	pci_read_config_dword(chip->pdev, 0x48, &val);
+	val = cb710_src_freq_mhz[(val >> 16) & 0xF];
+	dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val);
+	val *= 1000000;
+
+	mmc->ops = &cb710_mmc_host;
+	mmc->f_max = val;
+	mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX];
+	mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+
+	reader = mmc_priv(mmc);
+
+	tasklet_init(&reader->finish_req_tasklet,
+		cb710_mmc_finish_request_tasklet, (unsigned long)mmc);
+	spin_lock_init(&reader->irq_lock);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	cb710_set_irq_handler(slot, cb710_mmc_irq_handler);
+
+	err = mmc_add_host(mmc);
+	if (unlikely(err))
+		goto err_free_mmc;
+
+	dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n",
+		mmc_hostname(mmc));
+
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0);
+
+	return 0;
+
+err_free_mmc:
+	dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err);
+
+	cb710_set_irq_handler(slot, NULL);
+	mmc_free_host(mmc);
+	return err;
+}
+
+static int cb710_mmc_exit(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+	cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS);
+
+	mmc_remove_host(mmc);
+
+	/* IRQs should be disabled now, but let's stay on the safe side */
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	cb710_set_irq_handler(slot, NULL);
+
+	/* clear config ports - just in case */
+	cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0);
+	cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0);
+
+	tasklet_kill(&reader->finish_req_tasklet);
+
+	mmc_free_host(mmc);
+	return 0;
+}
+
+static struct platform_driver cb710_mmc_driver = {
+	.driver.name = "cb710-mmc",
+	.probe = cb710_mmc_init,
+	.remove = cb710_mmc_exit,
+#ifdef CONFIG_PM
+	.suspend = cb710_mmc_suspend,
+	.resume = cb710_mmc_resume,
+#endif
+};
+
+module_platform_driver(cb710_mmc_driver);
+
+MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
+MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cb710-mmc");

drivers/mmc/host/cb710-mmc.h

@@ -0,0 +1,104 @@
+/*
+ *  cb710/cb710-mmc.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_MMC_H
+#define LINUX_CB710_MMC_H
+
+#include <linux/cb710.h>
+
+/* per-MMC-reader structure */
+struct cb710_mmc_reader {
+	struct tasklet_struct finish_req_tasklet;
+	struct mmc_request *mrq;
+	spinlock_t irq_lock;
+	unsigned char last_power_mode;
+};
+
+/* some device struct walking */
+
+static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot)
+{
+	return platform_get_drvdata(&slot->pdev);
+}
+
+static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc)
+{
+	struct platform_device *pdev = container_of(mmc_dev(mmc),
+		struct platform_device, dev);
+	return cb710_pdev_to_slot(pdev);
+}
+
+/* registers (this might be all wrong ;) */
+
+#define CB710_MMC_DATA_PORT		0x00
+
+#define CB710_MMC_CONFIG_PORT		0x04
+#define CB710_MMC_CONFIG0_PORT		0x04
+#define CB710_MMC_CONFIG1_PORT		0x05
+#define   CB710_MMC_C1_4BIT_DATA_BUS		0x40
+#define CB710_MMC_CONFIG2_PORT		0x06
+#define   CB710_MMC_C2_READ_PIO_SIZE_MASK	0x0F	/* N-1 */
+#define CB710_MMC_CONFIG3_PORT		0x07
+
+#define CB710_MMC_CONFIGB_PORT		0x08
+
+#define CB710_MMC_IRQ_ENABLE_PORT	0x0C
+#define   CB710_MMC_IE_TEST_MASK		0x00BF
+#define   CB710_MMC_IE_CARD_INSERTION_STATUS	0x1000
+#define   CB710_MMC_IE_IRQ_ENABLE		0x8000
+#define   CB710_MMC_IE_CISTATUS_MASK		\
+		(CB710_MMC_IE_CARD_INSERTION_STATUS|CB710_MMC_IE_IRQ_ENABLE)
+
+#define CB710_MMC_STATUS_PORT		0x10
+#define   CB710_MMC_STATUS_ERROR_EVENTS		0x60FF
+#define CB710_MMC_STATUS0_PORT		0x10
+#define   CB710_MMC_S0_FIFO_UNDERFLOW		0x40
+#define CB710_MMC_STATUS1_PORT		0x11
+#define   CB710_MMC_S1_COMMAND_SENT		0x01
+#define   CB710_MMC_S1_DATA_TRANSFER_DONE	0x02
+#define   CB710_MMC_S1_PIO_TRANSFER_DONE	0x04
+#define   CB710_MMC_S1_CARD_CHANGED		0x10
+#define   CB710_MMC_S1_RESET			0x20
+#define CB710_MMC_STATUS2_PORT		0x12
+#define   CB710_MMC_S2_FIFO_READY		0x01
+#define   CB710_MMC_S2_FIFO_EMPTY		0x02
+#define   CB710_MMC_S2_BUSY_10			0x10
+#define   CB710_MMC_S2_BUSY_20			0x20
+#define CB710_MMC_STATUS3_PORT		0x13
+#define   CB710_MMC_S3_CARD_DETECTED		0x02
+#define   CB710_MMC_S3_WRITE_PROTECTED		0x04
+
+#define CB710_MMC_CMD_TYPE_PORT		0x14
+#define   CB710_MMC_RSP_TYPE_MASK		0x0007
+#define     CB710_MMC_RSP_R1			(0)
+#define     CB710_MMC_RSP_136			(5)
+#define     CB710_MMC_RSP_NO_CRC		(2)
+#define   CB710_MMC_RSP_PRESENT_MASK		0x0018
+#define     CB710_MMC_RSP_NONE			(0 << 3)
+#define     CB710_MMC_RSP_PRESENT		(1 << 3)
+#define     CB710_MMC_RSP_PRESENT_X		(2 << 3)
+#define   CB710_MMC_CMD_TYPE_MASK		0x0060
+#define     CB710_MMC_CMD_BC			(0 << 5)
+#define     CB710_MMC_CMD_BCR			(1 << 5)
+#define     CB710_MMC_CMD_AC			(2 << 5)
+#define     CB710_MMC_CMD_ADTC			(3 << 5)
+#define   CB710_MMC_DATA_READ			0x0080
+#define   CB710_MMC_CMD_CODE_MASK		0x3F00
+#define   CB710_MMC_CMD_CODE_SHIFT		8
+#define   CB710_MMC_IS_APP_CMD			0x4000
+#define   CB710_MMC_RSP_BUSY			0x8000
+
+#define CB710_MMC_CMD_PARAM_PORT	0x18
+#define CB710_MMC_TRANSFER_SIZE_PORT	0x1C
+#define CB710_MMC_RESPONSE0_PORT	0x20
+#define CB710_MMC_RESPONSE1_PORT	0x24
+#define CB710_MMC_RESPONSE2_PORT	0x28
+#define CB710_MMC_RESPONSE3_PORT	0x2C
+
+#endif /* LINUX_CB710_MMC_H */

drivers/mmc/host/dw_mmc-exynos.h

@@ -0,0 +1,247 @@
+/*
+ * Exynos Specific Extensions for Synopsys DW Multimedia Card Interface driver
+ *
+ * Copyright (C) 2012, Samsung Electronics Co., Ltd.
+ * Copyright (C) 2013, The Chromium OS Authors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _EXYNOS_DWMCI_H_
+#define _EXYNOS_DWMCI_H_
+
+#define NUM_PINS(x)			(x + 2)
+
+#define MAX_TUNING_RETRIES	6
+#define MAX_TUNING_LOOP		(MAX_TUNING_RETRIES * 8 * 2)
+
+
+#define EXYNOS_CCLKIN_MIN	25000000	/* unit: HZ */
+
+/* Exynos implementation specific driver private data */
+struct dw_mci_exynos_priv_data {
+	u8			ctrl_type;
+	u8			ciu_div;
+	u32			sdr_timing;
+	u32			sdr_hs_timing;
+	u32			ddr_timing;
+	u32                     hs400_timing;
+	u32                     tuned_sample;
+	u32			cur_speed;
+	u32			saved_dqs_en;
+	u32			saved_strobe_ctrl;
+	u32			hs200_timing;
+	u32			ddr200_timing;
+	u32			ddr200_ulp_timing;
+	u32			ddr200_tx_t_fastlimit;
+	u32			ddr200_tx_t_initval;
+	u32			sdr104_timing;
+	u32			sdr50_timing;
+	u32			*ref_clk;
+	u32			delay_line;
+	u32			tx_delay_line;
+	struct pinctrl		*pinctrl;
+	u32			clk_drive_number;
+	u32			clk_drive_tuning;
+	struct pinctrl_state	*clk_drive_base;
+	struct pinctrl_state	*clk_drive_str[6];
+	int			cd_gpio;
+	int			sec_sd_slot_type;
+#define SEC_NO_DET_SD_SLOT	0 /* No detect GPIO SD slot case */
+#define SEC_HOTPLUG_SD_SLOT	1 /* detect GPIO SD slot without Tray */
+#define SEC_HYBRID_SD_SLOT	2 /* detect GPIO SD slot with Tray */
+	u32			caps;
+	u32			ctrl_flag;
+	u32			ctrl_windows;
+	u32			ignore_phase;
+	u32			selclk_drv;
+	u32			voltage_int_extra;
+
+#define DW_MMC_EXYNOS_USE_FINE_TUNING		BIT(0)
+#define DW_MMC_EXYNOS_BYPASS_FOR_ALL_PASS	BIT(1)
+#define DW_MMC_EXYNOS_ENABLE_SHIFT		BIT(2)
+};
+
+extern int dw_mci_exynos_request_status(void);
+extern void dw_mci_reg_dump(struct dw_mci *host);
+
+/*****************/
+/* SFR addresses */
+/*****************/
+
+#define SFR_OFFSET		0x0004
+
+/*
+* Registers to support idmac 64-bit address mode
+*/
+#define SDMMC_DBADDRL 		 0x0088
+#define SDMMC_DBADDRU		(SDMMC_DBADDRL + SFR_OFFSET)
+#define SDMMC_IDSTS64		(SDMMC_DBADDRU + SFR_OFFSET)
+#define SDMMC_IDINTEN64		(SDMMC_IDSTS64 + SFR_OFFSET)
+#define SDMMC_DSCADDRL		(SDMMC_IDINTEN64 + SFR_OFFSET)
+#define SDMMC_DSCADDRU		(SDMMC_DSCADDRL + SFR_OFFSET)
+#define SDMMC_BUFADDRL		(SDMMC_DSCADDRU + SFR_OFFSET)
+#define SDMMC_BUFADDRU		(SDMMC_BUFADDRL + SFR_OFFSET)
+
+
+#if defined(CONFIG_MMC_DW_64BIT_DESC)
+#define SDMMC_AXI_BURST_LEN	0x00b4
+#define SDMMC_SECTOR_NUM_INC	0x01F8
+#define SDMMC_CLKSEL		(SDMMC_BUFADDRU + SFR_OFFSET) /* specific to Samsung Exynos */
+#else
+#define SDMMC_CLKSEL		(SDMMC_BUFADDR + SFR_OFFSET) /* specific to Samsung Exynos */
+#define SDMMC_AXI_BURST_LEN	0xffff	/*not used*/
+#define SDMMC_SECTOR_NUM_INC	0xffff	/*not used*/
+#endif
+
+#define FORCE_SWRESET		BIT(15)
+
+#define SDMMC_CDTHRCTL		0x100
+#define SDMMC_DATA(x)		(x)
+
+#define SDMMC_DDR200_ENABLE_SHIFT	0x110
+#define SDMMC_DDR200_RDDQS_EN		0x180
+#define SDMMC_DDR200_ASYNC_FIFO_CTRL	0x184
+#define SDMMC_DDR200_DLINE_CTRL		0x188
+
+/* Extended Register's Offset */
+#define SDMMC_HS400_DQS_EN		0x180
+#define SDMMC_HS400_ASYNC_FIFO_CTRL	0x184
+#define SDMMC_HS400_DLINE_CTRL		0x188
+
+#define SDMMC_SHA_CMD_IE		0x190
+#define SDMMC_SHA_CMD_IS		0x194
+#define SDMMC_DEBUG_INFO1		0x1A0
+#define SDMMC_DEBUG_INFO2		0x1A4
+
+#define SDMMC_EMMCP_BASE		0x1000
+#define SDMMC_MPSTAT			(SDMMC_EMMCP_BASE + 0x0008)
+#define SDMMC_MPSECURITY		(SDMMC_EMMCP_BASE + 0x0010)
+#define SDMMC_MPENCKEY			(SDMMC_EMMCP_BASE + 0x0020)
+#define SDMMC_MPSBEGIN0			(SDMMC_EMMCP_BASE + 0x0200)
+#define SDMMC_MPSEND0			(SDMMC_EMMCP_BASE + 0x0204)
+#define SDMMC_MPSLUN0			(SDMMC_EMMCP_BASE + 0x0208)
+#define SDMMC_MPSCTRL0			(SDMMC_EMMCP_BASE + 0x020C)
+#define SDMMC_MPSBEGIN1			(SDMMC_EMMCP_BASE + 0x0210)
+#define SDMMC_MPSEND1			(SDMMC_EMMCP_BASE + 0x0214)
+#define SDMMC_MPSCTRL1			(SDMMC_EMMCP_BASE + 0x021C)
+
+#define SDMMC_FORCE_CLK_STOP	0x0b0
+
+/******************/
+/* Derived macros */
+/******************/
+/* SDMMC_CLKSEL */
+#define SDMMC_CLKSEL_CCLK_SAMPLE(x)	(((x) & 7) << 0)
+#define SDMMC_CLKSEL_CCLK_FINE_SAMPLE(x)	(((x) & 0xF) << 0)
+#define SDMMC_CLKSEL_CCLK_DRIVE(x)	(((x) & 7) << 16)
+#define SDMMC_CLKSEL_CCLK_FINE_DRIVE(x)	(((x) & 3) << 22)
+#define SDMMC_CLKSEL_CCLK_DIVIDER(x)	(((x) & 7) << 24)
+#define SDMMC_CLKSEL_GET_DRV_WD3(x)	(((x) >> 16) & 0x7)
+#define SDMMC_CLKSEL_GET_DIVRATIO(x)	((((x) >> 24) & 0x7) + 1)
+#define SDMMC_CLKSEL_TIMING(div, f_drv, drv, sample) \
+	(SDMMC_CLKSEL_CCLK_DIVIDER(div) |	\
+	 SDMMC_CLKSEL_CCLK_FINE_DRIVE(f_drv) |	\
+	 SDMMC_CLKSEL_CCLK_DRIVE(drv) |		\
+	 SDMMC_CLKSEL_CCLK_SAMPLE(sample))
+
+#define SDMMC_CLKSEL_GET_DIV(x)		(((x) >> 24) & 0x7)
+#define SDMMC_CLKSEL_UP_SAMPLE(x, y)	(((x) & ~SDMMC_CLKSEL_CCLK_SAMPLE(7)) |\
+					 SDMMC_CLKSEL_CCLK_SAMPLE(y))
+
+#define SDMMC_CLKSEL_TIMING_MASK	SDMMC_CLKSEL_TIMING(0x7, 0x7, 0x7 ,0x7)
+
+/* RCLK_EN register defines */
+#define DATA_STROBE_EN			BIT(0)
+#define AXI_NON_BLOCKING_WR	BIT(7)
+
+/* SDMMC_DDR200_RDDQS_EN */
+#define DWMCI_TXDT_CRC_TIMER_FASTLIMIT(x)	(((x) & 0xFF) << 16)
+#define DWMCI_TXDT_CRC_TIMER_INITVAL(x)		(((x) & 0xFF) << 8)
+#define DWMCI_TXDT_CRC_TIMER_SET(x, y)	(DWMCI_TXDT_CRC_TIMER_FASTLIMIT(x) | \
+					DWMCI_TXDT_CRC_TIMER_INITVAL(y))
+#define DWMCI_AXI_NON_BLOCKING_WRITE		BIT(7)
+#define DWMCI_RESP_RCLK_MODE			BIT(5)
+#define DWMCI_BUSY_CHK_CLK_STOP_EN		BIT(2)
+#define DWMCI_RXDATA_START_BIT_SEL		BIT(1)
+#define DWMCI_RDDQS_EN				BIT(0)
+#define DWMCI_DDR200_RDDQS_EN_DEF	(DWMCI_TXDT_CRC_TIMER_FASTLIMIT(0x13) | \
+					DWMCI_TXDT_CRC_TIMER_INITVAL(0x15))
+
+/* SDMMC_DDR200_ASYNC_FIFO_CTRL */
+#define DWMCI_ASYNC_FIFO_RESET		BIT(0)
+
+/* SDMMC_DDR200_DLINE_CTRL */
+#define DWMCI_WD_DQS_DELAY_CTRL(x)		(((x) & 0x3FF) << 20)
+#define DWMCI_FIFO_CLK_DELAY_CTRL(x)		(((x) & 0x3) << 16)
+#define DWMCI_RD_DQS_DELAY_CTRL(x)		((x) & 0x3FF)
+#define DWMCI_DDR200_DLINE_CTRL_SET(x, y, z)	(DWMCI_WD_DQS_DELAY_CTRL(x) | \
+						DWMCI_FIFO_CLK_DELAY_CTRL(y) | \
+						DWMCI_RD_DQS_DELAY_CTRL(z))
+#define DWMCI_DDR200_DLINE_CTRL_DEF	(DWMCI_FIFO_CLK_DELAY_CTRL(0x2) | \
+					DWMCI_RD_DQS_DELAY_CTRL(0x40))
+
+/* SDMMC_SECTOR_NUM_INC */
+#define DWMCI_BURST_LENGTH_MASK		(0xF)
+#define DWMCI_BURST_LENGTH_CTRL(x)	(((x)&DWMCI_BURST_LENGTH_MASK) | \
+					(((x)&DWMCI_BURST_LENGTH_MASK)<<16))
+
+/* SDMMC_SECTOR_NUM_INC */
+#define DWMCI_SECTOR_SIZE_MASK		(0x1FFF)
+#define DWMCI_SECTOR_SIZE_CTRL(x)	((x)&DWMCI_SECTOR_SIZE_MASK)
+
+/* SDMMC_DDR200_ENABLE_SHIFT */
+#define DWMCI_ENABLE_SHIFT_MASK			(0x3)
+#define DWMCI_ENABLE_SHIFT(x)			((x) & DWMCI_ENABLE_SHIFT_MASK)
+
+/* Block number in eMMC */
+#define DWMCI_BLOCK_NUM			0xFFFFFFFF
+
+/* SMU control bits */
+#define DWMCI_MPSCTRL_SECURE_READ_BIT		BIT(7)
+#define DWMCI_MPSCTRL_SECURE_WRITE_BIT		BIT(6)
+#define DWMCI_MPSCTRL_NON_SECURE_READ_BIT	BIT(5)
+#define DWMCI_MPSCTRL_NON_SECURE_WRITE_BIT	BIT(4)
+#define DWMCI_MPSCTRL_USE_FUSE_KEY		BIT(3)
+#define DWMCI_MPSCTRL_ECB_MODE			BIT(2)
+#define DWMCI_MPSCTRL_ENCRYPTION		BIT(1)
+#define DWMCI_MPSCTRL_VALID			BIT(0)
+#define DWMCI_MPSCTRL_BYPASS			(DWMCI_MPSCTRL_SECURE_READ_BIT |\
+						DWMCI_MPSCTRL_SECURE_WRITE_BIT |\
+						DWMCI_MPSCTRL_NON_SECURE_READ_BIT |\
+						DWMCI_MPSCTRL_NON_SECURE_WRITE_BIT |\
+						DWMCI_MPSCTRL_VALID)
+
+
+#define SDMMC_CLKSEL_WAKEUP_INT		BIT(11)
+
+#define EXYNOS4210_FIXED_CIU_CLK_DIV	2
+#define EXYNOS4412_FIXED_CIU_CLK_DIV	4
+#define HS400_FIXED_CIU_CLK_DIV		1
+
+/* FMP SECURITY bits */
+#define DWMCI_MPSECURITY_PROTBYTZPC		BIT(31)
+#define DWMCI_MPSECURITY_MMC_SFR_PROT_ON	BIT(29)
+#define DWMCI_MPSECURITY_FMP_ENC_ON		BIT(28)
+#define DWMCI_MPSECURITY_DESCTYPE(type) 	((type & 0x3) << 19)
+
+/* FMP configuration */
+#define DW_MMC_BYPASS_SECTOR_BEGIN		0x0
+#define DW_MMC_ENCRYPTION_SECTOR_BEGIN		0x0000FFFF
+#define DW_MMC_FILE_ENCRYPTION_SECTOR_BEGIN	0xFFFF0000
+
+/* FMP logical unit number */
+#define DW_MMC_LUN_BEGIN			0
+#define DW_MMC_LUN_END				0xff
+#define DWMCI_SET_LUN(s, e) \
+	(((s & 0xff) << 16) | (e & 0xff))
+
+/* HWACG Control */
+#define MMC_HWACG_CONTROL			BIT(4)
+#define HWACG_Q_ACTIVE_EN				1
+#define HWACG_Q_ACTIVE_DIS				0
+
+#endif /* _EXYNOS_DWMCI_H_ */

drivers/mmc/host/dw_mmc-k3.c

@@ -0,0 +1,97 @@
+/*
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2013 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/dw_mmc.h>
+#include <linux/of_address.h>
+
+#include "dw_mmc.h"
+#include "dw_mmc-pltfm.h"
+
+static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+	int ret;
+
+	ret = clk_set_rate(host->ciu_clk, ios->clock);
+	if (ret)
+		dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
+
+	host->bus_hz = clk_get_rate(host->ciu_clk);
+}
+
+static const struct dw_mci_drv_data k3_drv_data = {
+	.set_ios		= dw_mci_k3_set_ios,
+};
+
+static const struct of_device_id dw_mci_k3_match[] = {
+	{ .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dw_mci_k3_match);
+
+static int dw_mci_k3_probe(struct platform_device *pdev)
+{
+	const struct dw_mci_drv_data *drv_data;
+	const struct of_device_id *match;
+
+	match = of_match_node(dw_mci_k3_match, pdev->dev.of_node);
+	drv_data = match->data;
+
+	return dw_mci_pltfm_register(pdev, drv_data);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dw_mci_k3_suspend(struct device *dev)
+{
+	struct dw_mci *host = dev_get_drvdata(dev);
+	int ret;
+
+	ret = dw_mci_suspend(host);
+	if (!ret)
+		clk_disable_unprepare(host->ciu_clk);
+
+	return ret;
+}
+
+static int dw_mci_k3_resume(struct device *dev)
+{
+	struct dw_mci *host = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(host->ciu_clk);
+	if (ret) {
+		dev_err(host->dev, "failed to enable ciu clock\n");
+		return ret;
+	}
+
+	return dw_mci_resume(host);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(dw_mci_k3_pmops, dw_mci_k3_suspend, dw_mci_k3_resume);
+
+static struct platform_driver dw_mci_k3_pltfm_driver = {
+	.probe		= dw_mci_k3_probe,
+	.remove		= dw_mci_pltfm_remove,
+	.driver		= {
+		.name		= "dwmmc_k3",
+		.of_match_table	= dw_mci_k3_match,
+		.pm		= &dw_mci_k3_pmops,
+	},
+};
+
+module_platform_driver(dw_mci_k3_pltfm_driver);
+
+MODULE_DESCRIPTION("K3 Specific DW-MSHC Driver Extension");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:dwmmc-k3");

drivers/mmc/host/dw_mmc-pci.c

@@ -0,0 +1,122 @@
+/*
+ * Synopsys DesignWare Multimedia Card PCI Interface driver
+ *
+ * Copyright (C) 2012 Vayavya Labs Pvt. Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/dw_mmc.h>
+#include "dw_mmc.h"
+
+#define PCI_BAR_NO 2
+#define SYNOPSYS_DW_MCI_VENDOR_ID 0x700
+#define SYNOPSYS_DW_MCI_DEVICE_ID 0x1107
+/* Defining the Capabilities */
+#define DW_MCI_CAPABILITIES (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED |\
+				MMC_CAP_SD_HIGHSPEED | MMC_CAP_8_BIT_DATA |\
+				MMC_CAP_SDIO_IRQ)
+
+static struct dw_mci_board pci_board_data = {
+	.num_slots			= 1,
+	.caps				= DW_MCI_CAPABILITIES,
+	.bus_hz				= 33 * 1000 * 1000,
+	.detect_delay_ms		= 200,
+	.fifo_depth			= 32,
+};
+
+static int dw_mci_pci_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *entries)
+{
+	struct dw_mci *host;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	host = devm_kzalloc(&pdev->dev, sizeof(struct dw_mci), GFP_KERNEL);
+	if (!host)
+		return -ENOMEM;
+
+	host->irq = pdev->irq;
+	host->irq_flags = IRQF_SHARED;
+	host->dev = &pdev->dev;
+	host->pdata = &pci_board_data;
+
+	ret = pcim_iomap_regions(pdev, 1 << PCI_BAR_NO, pci_name(pdev));
+	if (ret)
+		return ret;
+
+	host->regs = pcim_iomap_table(pdev)[PCI_BAR_NO];
+
+	pci_set_master(pdev);
+
+	ret = dw_mci_probe(host);
+	if (ret)
+		return ret;
+
+	pci_set_drvdata(pdev, host);
+
+	return 0;
+}
+
+static void dw_mci_pci_remove(struct pci_dev *pdev)
+{
+	struct dw_mci *host = pci_get_drvdata(pdev);
+
+	dw_mci_remove(host);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dw_mci_pci_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct dw_mci *host = pci_get_drvdata(pdev);
+
+	return dw_mci_suspend(host);
+}
+
+static int dw_mci_pci_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct dw_mci *host = pci_get_drvdata(pdev);
+
+	return dw_mci_resume(host);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(dw_mci_pci_pmops, dw_mci_pci_suspend, dw_mci_pci_resume);
+
+static const struct pci_device_id dw_mci_pci_id[] = {
+	{ PCI_DEVICE(SYNOPSYS_DW_MCI_VENDOR_ID, SYNOPSYS_DW_MCI_DEVICE_ID) },
+	{}
+};
+MODULE_DEVICE_TABLE(pci, dw_mci_pci_id);
+
+static struct pci_driver dw_mci_pci_driver = {
+	.name		= "dw_mmc_pci",
+	.id_table	= dw_mci_pci_id,
+	.probe		= dw_mci_pci_probe,
+	.remove		= dw_mci_pci_remove,
+	.driver		=	{
+		.pm =   &dw_mci_pci_pmops
+	},
+};
+
+module_pci_driver(dw_mci_pci_driver);
+
+MODULE_DESCRIPTION("DW Multimedia Card PCI Interface driver");
+MODULE_AUTHOR("Shashidhar Hiremath <shashidharh@vayavyalabs.com>");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/dw_mmc-pltfm.c

@@ -0,0 +1,134 @@
+/*
+ * Synopsys DesignWare Multimedia Card Interface driver
+ *
+ * Copyright (C) 2009 NXP Semiconductors
+ * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/dw_mmc.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+
+#include "dw_mmc.h"
+#include "dw_mmc-pltfm.h"
+
+static void dw_mci_pltfm_prepare_command(struct dw_mci *host, u32 *cmdr)
+{
+	*cmdr |= SDMMC_CMD_USE_HOLD_REG;
+}
+
+static const struct dw_mci_drv_data socfpga_drv_data = {
+	.prepare_command	= dw_mci_pltfm_prepare_command,
+};
+
+int dw_mci_pltfm_register(struct platform_device *pdev,
+			  const struct dw_mci_drv_data *drv_data)
+{
+	struct dw_mci *host;
+	struct resource	*regs;
+
+	host = devm_kzalloc(&pdev->dev, sizeof(struct dw_mci), GFP_KERNEL);
+	if (!host)
+		return -ENOMEM;
+
+	host->irq = platform_get_irq(pdev, 0);
+	if (host->irq < 0)
+		return host->irq;
+
+	host->drv_data = drv_data;
+	host->dev = &pdev->dev;
+	host->irq_flags = 0;
+	host->pdata = pdev->dev.platform_data;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->regs = devm_ioremap_resource(&pdev->dev, regs);
+	if (IS_ERR(host->regs))
+		return PTR_ERR(host->regs);
+
+	platform_set_drvdata(pdev, host);
+	return dw_mci_probe(host);
+}
+EXPORT_SYMBOL_GPL(dw_mci_pltfm_register);
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ * TODO: we should probably disable the clock to the card in the suspend path.
+ */
+static int dw_mci_pltfm_suspend(struct device *dev)
+{
+	struct dw_mci *host = dev_get_drvdata(dev);
+
+	return dw_mci_suspend(host);
+}
+
+static int dw_mci_pltfm_resume(struct device *dev)
+{
+	struct dw_mci *host = dev_get_drvdata(dev);
+
+	return dw_mci_resume(host);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+SIMPLE_DEV_PM_OPS(dw_mci_pltfm_pmops, dw_mci_pltfm_suspend, dw_mci_pltfm_resume);
+EXPORT_SYMBOL_GPL(dw_mci_pltfm_pmops);
+
+static const struct of_device_id dw_mci_pltfm_match[] = {
+	{ .compatible = "snps,dw-mshc", },
+	{ .compatible = "altr,socfpga-dw-mshc",
+		.data = &socfpga_drv_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
+
+static int dw_mci_pltfm_probe(struct platform_device *pdev)
+{
+	const struct dw_mci_drv_data *drv_data = NULL;
+	const struct of_device_id *match;
+
+	if (pdev->dev.of_node) {
+		match = of_match_node(dw_mci_pltfm_match, pdev->dev.of_node);
+		drv_data = match->data;
+	}
+
+	return dw_mci_pltfm_register(pdev, drv_data);
+}
+
+int dw_mci_pltfm_remove(struct platform_device *pdev)
+{
+	struct dw_mci *host = platform_get_drvdata(pdev);
+
+	dw_mci_remove(host);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dw_mci_pltfm_remove);
+
+static struct platform_driver dw_mci_pltfm_driver = {
+	.probe		= dw_mci_pltfm_probe,
+	.remove		= dw_mci_pltfm_remove,
+	.driver		= {
+		.name		= "dw_mmc",
+		.of_match_table	= dw_mci_pltfm_match,
+		.pm		= &dw_mci_pltfm_pmops,
+	},
+};
+
+module_platform_driver(dw_mci_pltfm_driver);
+
+MODULE_DESCRIPTION("DW Multimedia Card Interface driver");
+MODULE_AUTHOR("NXP Semiconductor VietNam");
+MODULE_AUTHOR("Imagination Technologies Ltd");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/dw_mmc-pltfm.h

@@ -0,0 +1,20 @@
+/*
+ * Synopsys DesignWare Multimedia Card Interface Platform driver
+ *
+ * Copyright (C) 2012, Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _DW_MMC_PLTFM_H_
+#define _DW_MMC_PLTFM_H_
+
+extern int dw_mci_pltfm_register(struct platform_device *pdev,
+				const struct dw_mci_drv_data *drv_data);
+extern int dw_mci_pltfm_remove(struct platform_device *pdev);
+extern const struct dev_pm_ops dw_mci_pltfm_pmops;
+
+#endif /* _DW_MMC_PLTFM_H_ */

drivers/mmc/host/dw_mmc-rockchip.c

@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/dw_mmc.h>
+#include <linux/of_address.h>
+
+#include "dw_mmc.h"
+#include "dw_mmc-pltfm.h"
+
+#define RK3288_CLKGEN_DIV       2
+
+static void dw_mci_rockchip_prepare_command(struct dw_mci *host, u32 *cmdr)
+{
+	*cmdr |= SDMMC_CMD_USE_HOLD_REG;
+}
+
+static int dw_mci_rk3288_setup_clock(struct dw_mci *host)
+{
+	host->bus_hz /= RK3288_CLKGEN_DIV;
+
+	return 0;
+}
+
+static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+	int ret;
+	unsigned int cclkin;
+	u32 bus_hz;
+
+	/*
+	 * cclkin: source clock of mmc controller
+	 * bus_hz: card interface clock generated by CLKGEN
+	 * bus_hz = cclkin / RK3288_CLKGEN_DIV
+	 * ios->clock = (div == 0) ? bus_hz : (bus_hz / (2 * div))
+	 *
+	 * Note: div can only be 0 or 1
+	 *       if DDR50 8bit mode(only emmc work in 8bit mode),
+	 *       div must be set 1
+	 */
+	if (ios->bus_width == MMC_BUS_WIDTH_8 &&
+	    ios->timing == MMC_TIMING_MMC_DDR52)
+		cclkin = 2 * ios->clock * RK3288_CLKGEN_DIV;
+	else
+		cclkin = ios->clock * RK3288_CLKGEN_DIV;
+
+	ret = clk_set_rate(host->ciu_clk, cclkin);
+	if (ret)
+		dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
+
+	bus_hz = clk_get_rate(host->ciu_clk) / RK3288_CLKGEN_DIV;
+	if (bus_hz != host->bus_hz) {
+		host->bus_hz = bus_hz;
+		/* force dw_mci_setup_bus() */
+		host->current_speed = 0;
+	}
+}
+
+static const struct dw_mci_drv_data rk2928_drv_data = {
+	.prepare_command        = dw_mci_rockchip_prepare_command,
+};
+
+static const struct dw_mci_drv_data rk3288_drv_data = {
+	.prepare_command        = dw_mci_rockchip_prepare_command,
+	.set_ios		= dw_mci_rk3288_set_ios,
+	.setup_clock    = dw_mci_rk3288_setup_clock,
+};
+
+static const struct of_device_id dw_mci_rockchip_match[] = {
+	{ .compatible = "rockchip,rk2928-dw-mshc",
+		.data = &rk2928_drv_data },
+	{ .compatible = "rockchip,rk3288-dw-mshc",
+		.data = &rk3288_drv_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
+
+static int dw_mci_rockchip_probe(struct platform_device *pdev)
+{
+	const struct dw_mci_drv_data *drv_data;
+	const struct of_device_id *match;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	match = of_match_node(dw_mci_rockchip_match, pdev->dev.of_node);
+	drv_data = match->data;
+
+	return dw_mci_pltfm_register(pdev, drv_data);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dw_mci_rockchip_suspend(struct device *dev)
+{
+	struct dw_mci *host = dev_get_drvdata(dev);
+
+	return dw_mci_suspend(host);
+}
+
+static int dw_mci_rockchip_resume(struct device *dev)
+{
+	struct dw_mci *host = dev_get_drvdata(dev);
+
+	return dw_mci_resume(host);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(dw_mci_rockchip_pmops,
+			 dw_mci_rockchip_suspend,
+			 dw_mci_rockchip_resume);
+
+static struct platform_driver dw_mci_rockchip_pltfm_driver = {
+	.probe		= dw_mci_rockchip_probe,
+	.remove		= __exit_p(dw_mci_pltfm_remove),
+	.driver		= {
+		.name		= "dwmmc_rockchip",
+		.of_match_table	= dw_mci_rockchip_match,
+		.pm		= &dw_mci_rockchip_pmops,
+	},
+};
+
+module_platform_driver(dw_mci_rockchip_pltfm_driver);
+
+MODULE_AUTHOR("Addy Ke <addy.ke@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip Specific DW-MSHC Driver Extension");
+MODULE_ALIAS("platform:dwmmc-rockchip");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/dw_mmc.h

@@ -0,0 +1,471 @@
+/*
+ * Synopsys DesignWare Multimedia Card Interface driver
+ *  (Based on NXP driver for lpc 31xx)
+ *
+ * Copyright (C) 2009 NXP Semiconductors
+ * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _DW_MMC_H_
+#define _DW_MMC_H_
+
+#define DW_MMC_MAX_TRANSFER_SIZE	4096
+#define DW_MMC_SECTOR_SIZE		512
+
+#ifdef CONFIG_MMC_DW_FMP_DM_CRYPT
+#define MMC_DW_IDMAC_MULTIPLIER	\
+	(DW_MMC_MAX_TRANSFER_SIZE / DW_MMC_SECTOR_SIZE)
+#else
+#define MMC_DW_IDMAC_MULTIPLIER	1
+#endif
+
+#define DW_MMC_240A		0x240a
+#define DW_MMC_260A		0x260a
+
+#define SDMMC_CTRL		0x000
+#define SDMMC_PWREN		0x004
+#define SDMMC_CLKDIV		0x008
+#define SDMMC_CLKSRC		0x00c
+#define SDMMC_CLKENA		0x010
+#define SDMMC_TMOUT		0x014
+#define SDMMC_CTYPE		0x018
+#define SDMMC_BLKSIZ		0x01c
+#define SDMMC_BYTCNT		0x020
+#define SDMMC_INTMASK		0x024
+#define SDMMC_CMDARG		0x028
+#define SDMMC_CMD		0x02c
+#define SDMMC_RESP0		0x030
+#define SDMMC_RESP1		0x034
+#define SDMMC_RESP2		0x038
+#define SDMMC_RESP3		0x03c
+#define SDMMC_MINTSTS		0x040
+#define SDMMC_RINTSTS		0x044
+#define SDMMC_STATUS		0x048
+#define SDMMC_FIFOTH		0x04c
+#define SDMMC_CDETECT		0x050
+#define SDMMC_WRTPRT		0x054
+#define SDMMC_GPIO		0x058
+#define SDMMC_TCBCNT		0x05c
+#define SDMMC_TBBCNT		0x060
+#define SDMMC_DEBNCE		0x064
+#define SDMMC_USRID		0x068
+#define SDMMC_VERID		0x06c
+#define SDMMC_HCON		0x070
+#define SDMMC_UHS_REG		0x074
+#define SDMMC_BMOD		0x080
+#define SDMMC_PLDMND		0x084
+#define SDMMC_DBADDR		0x088
+#define SDMMC_IDSTS		0x08c
+#define SDMMC_IDINTEN		0x090
+#define SDMMC_DSCADDR		0x094
+#define SDMMC_BUFADDR		0x098
+#define SDMMC_RESP_TAT		0x0AC
+#define SDMMC_CDTHRCTL		0x100
+#define SDMMC_EMMC_DDR_REG	0x10C
+#define SDMMC_DATA(x)		(x)
+
+/*
+ * Data offset is difference according to Version
+ * Lower than 2.40a : data register offest is 0x100
+ */
+#define DATA_OFFSET		0x100
+#define DATA_240A_OFFSET	0x200
+
+/* shift bit field */
+#define _SBF(f, v)		((v) << (f))
+
+/* Control register defines */
+#define SDMMC_CTRL_USE_IDMAC		BIT(25)
+#define SDMMC_CTRL_CEATA_INT_EN		BIT(11)
+#define SDMMC_CTRL_SEND_AS_CCSD		BIT(10)
+#define SDMMC_CTRL_SEND_CCSD		BIT(9)
+#define SDMMC_CTRL_ABRT_READ_DATA	BIT(8)
+#define SDMMC_CTRL_SEND_IRQ_RESP	BIT(7)
+#define SDMMC_CTRL_READ_WAIT		BIT(6)
+#define SDMMC_CTRL_DMA_ENABLE		BIT(5)
+#define SDMMC_CTRL_INT_ENABLE		BIT(4)
+#define SDMMC_CTRL_DMA_RESET		BIT(2)
+#define SDMMC_CTRL_FIFO_RESET		BIT(1)
+#define SDMMC_CTRL_RESET		BIT(0)
+/* Clock Enable register defines */
+#define SDMMC_CLKEN_LOW_PWR		BIT(16)
+#define SDMMC_CLKEN_ENABLE		BIT(0)
+/* time-out register defines */
+#define SDMMC_TMOUT_DATA(n)		_SBF(8, (n))
+#define SDMMC_TMOUT_DATA_MSK		0xFFFFFF00
+#define SDMMC_TMOUT_RESP(n)		((n) & 0xFF)
+#define SDMMC_TMOUT_RESP_MSK		0xFF
+/* card-type register defines */
+#define SDMMC_CTYPE_8BIT		BIT(16)
+#define SDMMC_CTYPE_4BIT		BIT(0)
+#define SDMMC_CTYPE_1BIT		0
+/* Interrupt status & mask register defines */
+#define SDMMC_INT_SDIO(n)		BIT(16 + (n))
+#define SDMMC_INT_EBE			BIT(15)
+#define SDMMC_INT_ACD			BIT(14)
+#define SDMMC_INT_SBE			BIT(13)
+#define SDMMC_INT_HLE			BIT(12)
+#define SDMMC_INT_FRUN			BIT(11)
+#define SDMMC_INT_HTO			BIT(10)
+#define SDMMC_INT_VOLT_SWITCH		BIT(10) /* overloads bit 10! */
+#define SDMMC_INT_DRTO			BIT(9)
+#define SDMMC_INT_RTO			BIT(8)
+#define SDMMC_INT_DCRC			BIT(7)
+#define SDMMC_INT_RCRC			BIT(6)
+#define SDMMC_INT_RXDR			BIT(5)
+#define SDMMC_INT_TXDR			BIT(4)
+#define SDMMC_INT_DATA_OVER		BIT(3)
+#define SDMMC_INT_CMD_DONE		BIT(2)
+#define SDMMC_INT_RESP_ERR		BIT(1)
+#define SDMMC_INT_CD			BIT(0)
+#define SDMMC_INT_ERROR			0xbfc2
+/* Command register defines */
+#define SDMMC_CMD_START			BIT(31)
+#define SDMMC_CMD_USE_HOLD_REG	BIT(29)
+#define SDMMC_CMD_VOLT_SWITCH		BIT(28)
+#define SDMMC_CMD_CCS_EXP		BIT(23)
+#define SDMMC_CMD_CEATA_RD		BIT(22)
+#define SDMMC_CMD_UPD_CLK		BIT(21)
+#define SDMMC_CMD_INIT			BIT(15)
+#define SDMMC_CMD_STOP			BIT(14)
+#define SDMMC_CMD_PRV_DAT_WAIT		BIT(13)
+#define SDMMC_CMD_SEND_STOP		BIT(12)
+#define SDMMC_CMD_STRM_MODE		BIT(11)
+#define SDMMC_CMD_DAT_WR		BIT(10)
+#define SDMMC_CMD_DAT_EXP		BIT(9)
+#define SDMMC_CMD_RESP_CRC		BIT(8)
+#define SDMMC_CMD_RESP_LONG		BIT(7)
+#define SDMMC_CMD_RESP_EXP		BIT(6)
+#define SDMMC_CMD_INDX(n)		((n) & 0x1F)
+/* Status register defines */
+#define SDMMC_GET_FCNT(x)		(((x)>>17) & 0x1FFF)
+#define SDMMC_STATUS_DMA_REQ		BIT(31)
+#define SDMMC_STATUS_BUSY		BIT(9)
+/* FIFOTH register defines */
+#define SDMMC_SET_FIFOTH(m, r, t)	(((m) & 0x7) << 28 | \
+					 ((r) & 0xFFF) << 16 | \
+					 ((t) & 0xFFF))
+
+#define SDMMC_FIFOTH_DMA_MULTI_TRANS_SIZE	28
+#define SDMMC_FIFOTH_RX_WMARK		16
+/* Internal DMAC interrupt defines */
+#define SDMMC_IDMAC_INT_AI		BIT(9)
+#define SDMMC_IDMAC_INT_NI		BIT(8)
+#define SDMMC_IDMAC_INT_CES		BIT(5)
+#define SDMMC_IDMAC_INT_DU		BIT(4)
+#define SDMMC_IDMAC_INT_FBE		BIT(2)
+#define SDMMC_IDMAC_INT_RI		BIT(1)
+#define SDMMC_IDMAC_INT_TI		BIT(0)
+/* Internal DMAC bus mode bits */
+#define SDMMC_IDMAC_ENABLE		BIT(7)
+#define SDMMC_IDMAC_FB			BIT(1)
+#define SDMMC_IDMAC_SWRESET		BIT(0)
+/* Version ID register define */
+#define SDMMC_GET_VERID(x)		((x) & 0xFFFF)
+/* Card read threshold */
+#define SDMMC_SET_RD_THLD(v, x)		(((v) & 0x1FFF) << 16 | (x))
+#define SDMMC_UHS_18V			BIT(0)
+/* All ctrl reset bits */
+#define SDMMC_CTRL_ALL_RESET_FLAGS \
+	(SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | SDMMC_CTRL_DMA_RESET)
+
+/* Register access macros */
+#define mci_readl(dev, reg)			\
+	__raw_readl((dev)->regs + SDMMC_##reg)
+#define mci_writel(dev, reg, value)			\
+	__raw_writel((value), (dev)->regs + SDMMC_##reg)
+
+/* timeout */
+#define dw_mci_set_timeout(host, value)	mci_writel(host, TMOUT, value)
+
+/* 16-bit FIFO access macros */
+#define mci_readw(dev, reg)			\
+	__raw_readw((dev)->regs + SDMMC_##reg)
+#define mci_writew(dev, reg, value)			\
+	__raw_writew((value), (dev)->regs + SDMMC_##reg)
+
+/* 64-bit FIFO access macros */
+#ifdef readq
+#ifdef CONFIG_MMC_DW_FORCE_32BIT_SFR_RW
+#define mci_readq(dev, reg) ({\
+		u64 __ret = 0;\
+		u32* ptr = (u32*)&__ret;\
+		*ptr++ = __raw_readl((dev)->regs + SDMMC_##reg);\
+		*ptr = __raw_readl((dev)->regs + SDMMC_##reg + 0x4);\
+		__ret;\
+	})
+#define mci_writeq(dev, reg, value) ({\
+		u32 *ptr = (u32*)&(value);\
+		__raw_writel(*ptr++, (dev)->regs + SDMMC_##reg);\
+		__raw_writel(*ptr, (dev)->regs + SDMMC_##reg + 0x4);\
+	})
+#else
+#define mci_readq(dev, reg)			\
+	__raw_readq((dev)->regs + SDMMC_##reg)
+#define mci_writeq(dev, reg, value)			\
+	__raw_writeq((value), (dev)->regs + SDMMC_##reg)
+#endif /* CONFIG_MMC_DW_FORCE_32BIT_SFR_RW */
+#else
+/*
+ * Dummy readq implementation for architectures that don't define it.
+ *
+ * We would assume that none of these architectures would configure
+ * the IP block with a 64bit FIFO width, so this code will never be
+ * executed on those machines. Defining these macros here keeps the
+ * rest of the code free from ifdefs.
+ */
+#define mci_readq(dev, reg)			\
+	(*(volatile u64 __force *)((dev)->regs + SDMMC_##reg))
+#define mci_writeq(dev, reg, value)			\
+	(*(volatile u64 __force *)((dev)->regs + SDMMC_##reg) = (value))
+#endif
+
+/*
+ * platform-dependent miscellaneous control
+ *
+ * Input arguments for platform-dependent control may be different
+ * for each one, respectively. If we would add functions like them
+ * whenever we need to do that, this common header file(dw_mmc.h)
+ * will be modified so frequently.
+ * The following enumeration type is to minimize an amount of changes
+ * of common files.
+ */
+
+enum dw_mci_misc_control {
+	CTRL_RESTORE_CLKSEL = 0,
+	CTRL_REQUEST_EXT_IRQ,
+	CTRL_CHECK_CD,
+};
+
+#define SDMMC_DATA_TMOUT_SHIFT		11
+#define SDMMC_RESP_TMOUT		0xFF
+#define SDMMC_DATA_TMOUT_CRT		8
+#define SDMMC_DATA_TMOUT_EXT		0x7
+#define SDMMC_DATA_TMOUT_EXT_SHIFT	8
+
+extern u32 dw_mci_calc_timeout(struct dw_mci *host);
+
+extern int dw_mci_probe(struct dw_mci *host);
+extern void dw_mci_remove(struct dw_mci *host);
+#ifdef CONFIG_PM_SLEEP
+extern int dw_mci_suspend(struct dw_mci *host);
+extern int dw_mci_resume(struct dw_mci *host);
+#endif
+
+/**
+ * struct dw_mci_slot - MMC slot state
+ * @mmc: The mmc_host representing this slot.
+ * @host: The MMC controller this slot is using.
+ * @quirks: Slot-level quirks (DW_MCI_SLOT_QUIRK_XXX)
+ * @ctype: Card type for this slot.
+ * @mrq: mmc_request currently being processed or waiting to be
+ *	processed, or NULL when the slot is idle.
+ * @queue_node: List node for placing this node in the @queue list of
+ *	&struct dw_mci.
+ * @clock: Clock rate configured by set_ios(). Protected by host->lock.
+ * @__clk_old: The last updated clock with reflecting clock divider.
+ *	Keeping track of this helps us to avoid spamming the console
+ *	with CONFIG_MMC_CLKGATE.
+ * @flags: Random state bits associated with the slot.
+ * @id: Number of this slot.
+ * @last_detect_state: Most recently observed card detect state.
+ */
+struct dw_mci_slot {
+	struct mmc_host		*mmc;
+	struct dw_mci		*host;
+
+	int			quirks;
+
+	u32			ctype;
+
+	struct mmc_request	*mrq;
+	struct list_head	queue_node;
+
+	unsigned int		clock;
+	unsigned int		__clk_old;
+
+	unsigned long		flags;
+#define DW_MMC_CARD_PRESENT	0
+#define DW_MMC_CARD_NEED_INIT	1
+	int			id;
+	int			last_detect_state;
+};
+
+/**
+ * struct dw_mci_debug_data - DwMMC debugging infomation
+ * @host_count: a number of all hosts
+ * @info_count: a number of set of debugging information
+ * @info_index: index of debugging information for each host
+ * @host: pointer of each dw_mci structure
+ * @debug_info: debugging information structure
+ */
+
+struct dw_mci_cmd_log {
+	u64	send_time;
+	u64	done_time;
+	u8	cmd;
+	u32	arg;
+	u8	data_size;
+	/* no data CMD = CD, data CMD = DTO */
+	/*
+	 * 0b1000 0000	: new_cmd with without send_cmd
+	 * 0b0000 1000	: error occurs
+	 * 0b0000 0100	: data_done : DTO(Data Transfer Over)
+	 * 0b0000 0010	: resp : CD(Command Done)
+	 * 0b0000 0001	: send_cmd : set 1 only start_command
+	 */
+	u8	seq_status;	/* 0bxxxx xxxx : error data_done resp send */
+#define DW_MCI_FLAG_SEND_CMD	BIT(0)
+#define DW_MCI_FLAG_CD		BIT(1)
+#define DW_MCI_FLAG_DTO		BIT(2)
+#define DW_MCI_FLAG_ERROR	BIT(3)
+#define DW_MCI_FLAG_NEW_CMD_ERR	BIT(7)
+
+	u16	rint_sts;	/* RINTSTS value in case of error */
+	u8	status_count;	/* TBD : It can be changed */
+};
+
+enum dw_mci_req_log_state {
+	STATE_REQ_START = 0,
+	STATE_REQ_CMD_PROCESS,
+	STATE_REQ_DATA_PROCESS,
+	STATE_REQ_END,
+};
+
+struct dw_mci_req_log {
+	u64				timestamp;
+	u32				info0;
+	u32				info1;
+	u32				info2;
+	u32				info3;
+	u32				pending_events;
+	u32				completed_events;
+	enum dw_mci_state		state;
+	enum dw_mci_state		state_cmd;
+	enum dw_mci_state		state_dat;
+	enum dw_mci_req_log_state	log_state;
+};
+
+#define DWMCI_LOG_MAX		0x80
+#define DWMCI_REQ_LOG_MAX	0x40
+struct dw_mci_debug_info {
+	struct dw_mci_cmd_log		cmd_log[DWMCI_LOG_MAX];
+	atomic_t			cmd_log_count;
+	struct dw_mci_req_log		req_log[DWMCI_REQ_LOG_MAX];
+	atomic_t			req_log_count;
+	unsigned char			en_logging;
+#define DW_MCI_DEBUG_ON_CMD	BIT(0)
+#define DW_MCI_DEBUG_ON_REQ	BIT(1)
+};
+
+#define DWMCI_DBG_NUM_HOST	3
+
+#define DWMCI_DBG_NUM_INFO	2			/* configurable */
+#define DWMCI_DBG_MASK_INFO	(BIT(0) | BIT(1) | BIT(2))	/* configurable */
+#define DWMCI_DBG_BIT_HOST(x)	BIT(x)
+
+struct dw_mci_debug_data {
+	unsigned char			host_count;
+	unsigned char			info_count;
+	unsigned char			info_index[DWMCI_DBG_NUM_HOST];
+	struct dw_mci			*host[DWMCI_DBG_NUM_HOST];
+	struct dw_mci_debug_info	debug_info[DWMCI_DBG_NUM_INFO];
+};
+
+struct dw_mci_tuning_data {
+	const u8 *blk_pattern;
+	unsigned int blksz;
+};
+
+/**
+ * dw_mci driver data - dw-mshc implementation specific driver data.
+ * @caps: mmc subsystem specified capabilities of the controller(s).
+ * @init: early implementation specific initialization.
+ * @setup_clock: implementation specific clock configuration.
+ * @prepare_command: handle CMD register extensions.
+ * @set_ios: handle bus specific extensions.
+ * @parse_dt: parse implementation specific device tree properties.
+ * @execute_tuning: implementation specific tuning procedure.
+ * @cfg_smu: to configure security management unit
+ *
+ * Provide controller implementation specific extensions. The usage of this
+ * data structure is fully optional and usage of each member in this structure
+ * is optional as well.
+ */
+struct dw_mci_drv_data {
+	unsigned long	*caps;
+	int		(*init)(struct dw_mci *host);
+	int		(*setup_clock)(struct dw_mci *host);
+	void		(*prepare_command)(struct dw_mci *host, u32 *cmdr);
+	void		(*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
+	int		(*parse_dt)(struct dw_mci *host);
+	int		(*execute_tuning)(struct dw_mci_slot *slot, u32 opcode,
+					struct dw_mci_tuning_data *tuning_data);
+	void            (*cfg_smu)(struct dw_mci *host);
+	int             (*misc_control)(struct dw_mci *host,
+				enum dw_mci_misc_control control, void *priv);
+};
+
+struct dw_mci_sfe_ram_dump {
+	u32			contrl;
+	u32			pwren;
+	u32			clkdiv;
+	u32			clkena;
+	u32			clksrc;
+	u32			tmout;
+	u32			ctype;
+	u32			blksiz;
+	u32			bytcnt;
+	u32			intmask;
+	u32			cmdarg;
+	u32			cmd;
+	u32		       	mintsts;
+	u32			rintsts;
+	u32			status;
+	u32			fifoth;
+	u32			tcbcnt;
+	u32			tbbcnt;
+	u32			debnce;
+	u32			uhs_reg;
+	u32			bmod;
+	u32			pldmnd;
+	u32			dbaddrl;
+	u32			dbaddru;
+	u32			dscaddrl;
+	u32			dscaddru;
+	u32			bufaddru;
+	u32			dbaddr;
+	u32			dscaddr;
+	u32			bufaddr;
+	u32			clksel;
+	u32			idsts64;
+	u32			idinten64;
+	u32			force_clk_stop;
+	u32			cdthrctl;
+	u32			ddr200_rdqs_en;
+	u32			ddr200_acync_fifo_ctrl;
+	u32			ddr200_dline_ctrl;
+	u32			fmp_emmcp_base;
+	u32			mpsecurity;
+	u32			mpstat;
+	u32			mpsbegin;
+	u32			mpsend;
+	u32			mpsctrl;
+	u32			cmd_status;
+	u32			data_status;
+	u32			pending_events;
+	u32			completed_events;
+	u32			host_state;
+	u32			cmd_index;
+	u32			fifo_count;
+	u32			data_busy;
+	u32			data_3_state;
+	u32			fifo_tx_watermark;
+	u32			fifo_rx_watermark;
+};
+#endif /* _DW_MMC_H_ */

drivers/mmc/host/mmci.h

@@ -0,0 +1,247 @@
+/*
+ *  linux/drivers/mmc/host/mmci.h - ARM PrimeCell MMCI PL180/1 driver
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define MMCIPOWER		0x000
+#define MCI_PWR_OFF		0x00
+#define MCI_PWR_UP		0x02
+#define MCI_PWR_ON		0x03
+#define MCI_OD			(1 << 6)
+#define MCI_ROD			(1 << 7)
+/*
+ * The ST Micro version does not have ROD and reuse the voltage registers for
+ * direction settings.
+ */
+#define MCI_ST_DATA2DIREN	(1 << 2)
+#define MCI_ST_CMDDIREN		(1 << 3)
+#define MCI_ST_DATA0DIREN	(1 << 4)
+#define MCI_ST_DATA31DIREN	(1 << 5)
+#define MCI_ST_FBCLKEN		(1 << 7)
+#define MCI_ST_DATA74DIREN	(1 << 8)
+
+#define MMCICLOCK		0x004
+#define MCI_CLK_ENABLE		(1 << 8)
+#define MCI_CLK_PWRSAVE		(1 << 9)
+#define MCI_CLK_BYPASS		(1 << 10)
+#define MCI_4BIT_BUS		(1 << 11)
+/*
+ * 8bit wide buses, hardware flow contronl, negative edges and clock inversion
+ * supported in ST Micro U300 and Ux500 versions
+ */
+#define MCI_ST_8BIT_BUS		(1 << 12)
+#define MCI_ST_U300_HWFCEN	(1 << 13)
+#define MCI_ST_UX500_NEG_EDGE	(1 << 13)
+#define MCI_ST_UX500_HWFCEN	(1 << 14)
+#define MCI_ST_UX500_CLK_INV	(1 << 15)
+/* Modified PL180 on Versatile Express platform */
+#define MCI_ARM_HWFCEN		(1 << 12)
+
+/* Modified on Qualcomm Integrations */
+#define MCI_QCOM_CLK_WIDEBUS_8	(BIT(10) | BIT(11))
+#define MCI_QCOM_CLK_FLOWENA	BIT(12)
+#define MCI_QCOM_CLK_INVERTOUT	BIT(13)
+
+/* select in latch data and command in */
+#define MCI_QCOM_CLK_SELECT_IN_FBCLK	BIT(15)
+#define MCI_QCOM_CLK_SELECT_IN_DDR_MODE	(BIT(14) | BIT(15))
+
+#define MMCIARGUMENT		0x008
+#define MMCICOMMAND		0x00c
+#define MCI_CPSM_RESPONSE	(1 << 6)
+#define MCI_CPSM_LONGRSP	(1 << 7)
+#define MCI_CPSM_INTERRUPT	(1 << 8)
+#define MCI_CPSM_PENDING	(1 << 9)
+#define MCI_CPSM_ENABLE		(1 << 10)
+/* Argument flag extenstions in the ST Micro versions */
+#define MCI_ST_SDIO_SUSP	(1 << 11)
+#define MCI_ST_ENCMD_COMPL	(1 << 12)
+#define MCI_ST_NIEN		(1 << 13)
+#define MCI_ST_CE_ATACMD	(1 << 14)
+
+/* Modified on Qualcomm Integrations */
+#define MCI_QCOM_CSPM_DATCMD		BIT(12)
+#define MCI_QCOM_CSPM_MCIABORT		BIT(13)
+#define MCI_QCOM_CSPM_CCSENABLE		BIT(14)
+#define MCI_QCOM_CSPM_CCSDISABLE	BIT(15)
+#define MCI_QCOM_CSPM_AUTO_CMD19	BIT(16)
+#define MCI_QCOM_CSPM_AUTO_CMD21	BIT(21)
+
+#define MMCIRESPCMD		0x010
+#define MMCIRESPONSE0		0x014
+#define MMCIRESPONSE1		0x018
+#define MMCIRESPONSE2		0x01c
+#define MMCIRESPONSE3		0x020
+#define MMCIDATATIMER		0x024
+#define MMCIDATALENGTH		0x028
+#define MMCIDATACTRL		0x02c
+#define MCI_DPSM_ENABLE		(1 << 0)
+#define MCI_DPSM_DIRECTION	(1 << 1)
+#define MCI_DPSM_MODE		(1 << 2)
+#define MCI_DPSM_DMAENABLE	(1 << 3)
+#define MCI_DPSM_BLOCKSIZE	(1 << 4)
+/* Control register extensions in the ST Micro U300 and Ux500 versions */
+#define MCI_ST_DPSM_RWSTART	(1 << 8)
+#define MCI_ST_DPSM_RWSTOP	(1 << 9)
+#define MCI_ST_DPSM_RWMOD	(1 << 10)
+#define MCI_ST_DPSM_SDIOEN	(1 << 11)
+/* Control register extensions in the ST Micro Ux500 versions */
+#define MCI_ST_DPSM_DMAREQCTL	(1 << 12)
+#define MCI_ST_DPSM_DBOOTMODEEN	(1 << 13)
+#define MCI_ST_DPSM_BUSYMODE	(1 << 14)
+#define MCI_ST_DPSM_DDRMODE	(1 << 15)
+
+#define MMCIDATACNT		0x030
+#define MMCISTATUS		0x034
+#define MCI_CMDCRCFAIL		(1 << 0)
+#define MCI_DATACRCFAIL		(1 << 1)
+#define MCI_CMDTIMEOUT		(1 << 2)
+#define MCI_DATATIMEOUT		(1 << 3)
+#define MCI_TXUNDERRUN		(1 << 4)
+#define MCI_RXOVERRUN		(1 << 5)
+#define MCI_CMDRESPEND		(1 << 6)
+#define MCI_CMDSENT		(1 << 7)
+#define MCI_DATAEND		(1 << 8)
+#define MCI_STARTBITERR		(1 << 9)
+#define MCI_DATABLOCKEND	(1 << 10)
+#define MCI_CMDACTIVE		(1 << 11)
+#define MCI_TXACTIVE		(1 << 12)
+#define MCI_RXACTIVE		(1 << 13)
+#define MCI_TXFIFOHALFEMPTY	(1 << 14)
+#define MCI_RXFIFOHALFFULL	(1 << 15)
+#define MCI_TXFIFOFULL		(1 << 16)
+#define MCI_RXFIFOFULL		(1 << 17)
+#define MCI_TXFIFOEMPTY		(1 << 18)
+#define MCI_RXFIFOEMPTY		(1 << 19)
+#define MCI_TXDATAAVLBL		(1 << 20)
+#define MCI_RXDATAAVLBL		(1 << 21)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOIT		(1 << 22)
+#define MCI_ST_CEATAEND		(1 << 23)
+#define MCI_ST_CARDBUSY		(1 << 24)
+
+#define MMCICLEAR		0x038
+#define MCI_CMDCRCFAILCLR	(1 << 0)
+#define MCI_DATACRCFAILCLR	(1 << 1)
+#define MCI_CMDTIMEOUTCLR	(1 << 2)
+#define MCI_DATATIMEOUTCLR	(1 << 3)
+#define MCI_TXUNDERRUNCLR	(1 << 4)
+#define MCI_RXOVERRUNCLR	(1 << 5)
+#define MCI_CMDRESPENDCLR	(1 << 6)
+#define MCI_CMDSENTCLR		(1 << 7)
+#define MCI_DATAENDCLR		(1 << 8)
+#define MCI_STARTBITERRCLR	(1 << 9)
+#define MCI_DATABLOCKENDCLR	(1 << 10)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOITC		(1 << 22)
+#define MCI_ST_CEATAENDC	(1 << 23)
+#define MCI_ST_BUSYENDC		(1 << 24)
+
+#define MMCIMASK0		0x03c
+#define MCI_CMDCRCFAILMASK	(1 << 0)
+#define MCI_DATACRCFAILMASK	(1 << 1)
+#define MCI_CMDTIMEOUTMASK	(1 << 2)
+#define MCI_DATATIMEOUTMASK	(1 << 3)
+#define MCI_TXUNDERRUNMASK	(1 << 4)
+#define MCI_RXOVERRUNMASK	(1 << 5)
+#define MCI_CMDRESPENDMASK	(1 << 6)
+#define MCI_CMDSENTMASK		(1 << 7)
+#define MCI_DATAENDMASK		(1 << 8)
+#define MCI_STARTBITERRMASK	(1 << 9)
+#define MCI_DATABLOCKENDMASK	(1 << 10)
+#define MCI_CMDACTIVEMASK	(1 << 11)
+#define MCI_TXACTIVEMASK	(1 << 12)
+#define MCI_RXACTIVEMASK	(1 << 13)
+#define MCI_TXFIFOHALFEMPTYMASK	(1 << 14)
+#define MCI_RXFIFOHALFFULLMASK	(1 << 15)
+#define MCI_TXFIFOFULLMASK	(1 << 16)
+#define MCI_RXFIFOFULLMASK	(1 << 17)
+#define MCI_TXFIFOEMPTYMASK	(1 << 18)
+#define MCI_RXFIFOEMPTYMASK	(1 << 19)
+#define MCI_TXDATAAVLBLMASK	(1 << 20)
+#define MCI_RXDATAAVLBLMASK	(1 << 21)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOITMASK	(1 << 22)
+#define MCI_ST_CEATAENDMASK	(1 << 23)
+#define MCI_ST_BUSYEND		(1 << 24)
+
+#define MMCIMASK1		0x040
+#define MMCIFIFOCNT		0x048
+#define MMCIFIFO		0x080 /* to 0x0bc */
+
+#define MCI_IRQENABLE	\
+	(MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK|	\
+	MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK|	\
+	MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK)
+
+/* These interrupts are directed to IRQ1 when two IRQ lines are available */
+#define MCI_IRQ1MASK \
+	(MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
+	 MCI_TXFIFOHALFEMPTYMASK)
+
+#define NR_SG		128
+
+struct clk;
+struct variant_data;
+struct dma_chan;
+
+struct mmci_host_next {
+	struct dma_async_tx_descriptor	*dma_desc;
+	struct dma_chan			*dma_chan;
+	s32				cookie;
+};
+
+struct mmci_host {
+	phys_addr_t		phybase;
+	void __iomem		*base;
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+	struct mmc_host		*mmc;
+	struct clk		*clk;
+	bool			singleirq;
+
+	spinlock_t		lock;
+
+	unsigned int		mclk;
+	/* cached value of requested clk in set_ios */
+	unsigned int		clock_cache;
+	unsigned int		cclk;
+	u32			pwr_reg;
+	u32			pwr_reg_add;
+	u32			clk_reg;
+	u32			datactrl_reg;
+	u32			busy_status;
+	bool			vqmmc_enabled;
+	struct mmci_platform_data *plat;
+	struct variant_data	*variant;
+
+	u8			hw_designer;
+	u8			hw_revision:4;
+
+	struct timer_list	timer;
+	unsigned int		oldstat;
+
+	/* pio stuff */
+	struct sg_mapping_iter	sg_miter;
+	unsigned int		size;
+	int (*get_rx_fifocnt)(struct mmci_host *h, u32 status, int remain);
+
+#ifdef CONFIG_DMA_ENGINE
+	/* DMA stuff */
+	struct dma_chan		*dma_current;
+	struct dma_chan		*dma_rx_channel;
+	struct dma_chan		*dma_tx_channel;
+	struct dma_async_tx_descriptor	*dma_desc_current;
+	struct mmci_host_next	next_data;
+
+#define dma_inprogress(host)	((host)->dma_current)
+#else
+#define dma_inprogress(host)	(0)
+#endif
+};
+

drivers/mmc/host/mmci_qcom_dml.c

@@ -0,0 +1,177 @@
+/*
+ *
+ * Copyright (c) 2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/of.h>
+#include <linux/of_dma.h>
+#include <linux/bitops.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include "mmci.h"
+
+/* Registers */
+#define DML_CONFIG			0x00
+#define PRODUCER_CRCI_MSK		GENMASK(1, 0)
+#define PRODUCER_CRCI_DISABLE		0
+#define PRODUCER_CRCI_X_SEL		BIT(0)
+#define PRODUCER_CRCI_Y_SEL		BIT(1)
+#define CONSUMER_CRCI_MSK		GENMASK(3, 2)
+#define CONSUMER_CRCI_DISABLE		0
+#define CONSUMER_CRCI_X_SEL		BIT(2)
+#define CONSUMER_CRCI_Y_SEL		BIT(3)
+#define PRODUCER_TRANS_END_EN		BIT(4)
+#define BYPASS				BIT(16)
+#define DIRECT_MODE			BIT(17)
+#define INFINITE_CONS_TRANS		BIT(18)
+
+#define DML_SW_RESET			0x08
+#define DML_PRODUCER_START		0x0c
+#define DML_CONSUMER_START		0x10
+#define DML_PRODUCER_PIPE_LOGICAL_SIZE	0x14
+#define DML_CONSUMER_PIPE_LOGICAL_SIZE	0x18
+#define DML_PIPE_ID			0x1c
+#define PRODUCER_PIPE_ID_SHFT		0
+#define PRODUCER_PIPE_ID_MSK		GENMASK(4, 0)
+#define CONSUMER_PIPE_ID_SHFT		16
+#define CONSUMER_PIPE_ID_MSK		GENMASK(20, 16)
+
+#define DML_PRODUCER_BAM_BLOCK_SIZE	0x24
+#define DML_PRODUCER_BAM_TRANS_SIZE	0x28
+
+/* other definitions */
+#define PRODUCER_PIPE_LOGICAL_SIZE	4096
+#define CONSUMER_PIPE_LOGICAL_SIZE	4096
+
+#define DML_OFFSET			0x800
+
+void dml_start_xfer(struct mmci_host *host, struct mmc_data *data)
+{
+	u32 config;
+	void __iomem *base = host->base + DML_OFFSET;
+
+	if (data->flags & MMC_DATA_READ) {
+		/* Read operation: configure DML for producer operation */
+		/* Set producer CRCI-x and disable consumer CRCI */
+		config = readl_relaxed(base + DML_CONFIG);
+		config = (config & ~PRODUCER_CRCI_MSK) | PRODUCER_CRCI_X_SEL;
+		config = (config & ~CONSUMER_CRCI_MSK) | CONSUMER_CRCI_DISABLE;
+		writel_relaxed(config, base + DML_CONFIG);
+
+		/* Set the Producer BAM block size */
+		writel_relaxed(data->blksz, base + DML_PRODUCER_BAM_BLOCK_SIZE);
+
+		/* Set Producer BAM Transaction size */
+		writel_relaxed(data->blocks * data->blksz,
+			       base + DML_PRODUCER_BAM_TRANS_SIZE);
+		/* Set Producer Transaction End bit */
+		config = readl_relaxed(base + DML_CONFIG);
+		config |= PRODUCER_TRANS_END_EN;
+		writel_relaxed(config, base + DML_CONFIG);
+		/* Trigger producer */
+		writel_relaxed(1, base + DML_PRODUCER_START);
+	} else {
+		/* Write operation: configure DML for consumer operation */
+		/* Set consumer CRCI-x and disable producer CRCI*/
+		config = readl_relaxed(base + DML_CONFIG);
+		config = (config & ~CONSUMER_CRCI_MSK) | CONSUMER_CRCI_X_SEL;
+		config = (config & ~PRODUCER_CRCI_MSK) | PRODUCER_CRCI_DISABLE;
+		writel_relaxed(config, base + DML_CONFIG);
+		/* Clear Producer Transaction End bit */
+		config = readl_relaxed(base + DML_CONFIG);
+		config &= ~PRODUCER_TRANS_END_EN;
+		writel_relaxed(config, base + DML_CONFIG);
+		/* Trigger consumer */
+		writel_relaxed(1, base + DML_CONSUMER_START);
+	}
+
+	/* make sure the dml is configured before dma is triggered */
+	wmb();
+}
+
+static int of_get_dml_pipe_index(struct device_node *np, const char *name)
+{
+	int index;
+	struct of_phandle_args	dma_spec;
+
+	index = of_property_match_string(np, "dma-names", name);
+
+	if (index < 0)
+		return -ENODEV;
+
+	if (of_parse_phandle_with_args(np, "dmas", "#dma-cells", index,
+				       &dma_spec))
+		return -ENODEV;
+
+	if (dma_spec.args_count)
+		return dma_spec.args[0];
+
+	return -ENODEV;
+}
+
+/* Initialize the dml hardware connected to SD Card controller */
+int dml_hw_init(struct mmci_host *host, struct device_node *np)
+{
+	u32 config;
+	void __iomem *base;
+	int consumer_id, producer_id;
+
+	consumer_id = of_get_dml_pipe_index(np, "tx");
+	producer_id = of_get_dml_pipe_index(np, "rx");
+
+	if (producer_id < 0 || consumer_id < 0)
+		return -ENODEV;
+
+	base = host->base + DML_OFFSET;
+
+	/* Reset the DML block */
+	writel_relaxed(1, base + DML_SW_RESET);
+
+	/* Disable the producer and consumer CRCI */
+	config = (PRODUCER_CRCI_DISABLE | CONSUMER_CRCI_DISABLE);
+	/*
+	 * Disable the bypass mode. Bypass mode will only be used
+	 * if data transfer is to happen in PIO mode and don't
+	 * want the BAM interface to connect with SDCC-DML.
+	 */
+	config &= ~BYPASS;
+	/*
+	 * Disable direct mode as we don't DML to MASTER the AHB bus.
+	 * BAM connected with DML should MASTER the AHB bus.
+	 */
+	config &= ~DIRECT_MODE;
+	/*
+	 * Disable infinite mode transfer as we won't be doing any
+	 * infinite size data transfers. All data transfer will be
+	 * of finite data size.
+	 */
+	config &= ~INFINITE_CONS_TRANS;
+	writel_relaxed(config, base + DML_CONFIG);
+
+	/*
+	 * Initialize the logical BAM pipe size for producer
+	 * and consumer.
+	 */
+	writel_relaxed(PRODUCER_PIPE_LOGICAL_SIZE,
+		       base + DML_PRODUCER_PIPE_LOGICAL_SIZE);
+	writel_relaxed(CONSUMER_PIPE_LOGICAL_SIZE,
+		       base + DML_CONSUMER_PIPE_LOGICAL_SIZE);
+
+	/* Initialize Producer/consumer pipe id */
+	writel_relaxed(producer_id | (consumer_id << CONSUMER_PIPE_ID_SHFT),
+		       base + DML_PIPE_ID);
+
+	/* Make sure dml intialization is finished */
+	mb();
+
+	return 0;
+}

drivers/mmc/host/mmci_qcom_dml.h

@@ -0,0 +1,31 @@
+/*
+ *
+ * Copyright (c) 2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef __MMC_QCOM_DML_H__
+#define __MMC_QCOM_DML_H__
+
+#ifdef CONFIG_MMC_QCOM_DML
+int dml_hw_init(struct mmci_host *host, struct device_node *np);
+void dml_start_xfer(struct mmci_host *host, struct mmc_data *data);
+#else
+static inline int dml_hw_init(struct mmci_host *host, struct device_node *np)
+{
+	return -ENOSYS;
+}
+static inline void dml_start_xfer(struct mmci_host *host, struct mmc_data *data)
+{
+}
+#endif /* CONFIG_MMC_QCOM_DML */
+
+#endif /* __MMC_QCOM_DML_H__ */

drivers/mmc/host/moxart-mmc.c

@@ -0,0 +1,728 @@
+/*
+ * MOXA ART MMC host driver.
+ *
+ * Copyright (C) 2014 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * Based on code from
+ * Moxa Technologies Co., Ltd. <www.moxa.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sd.h>
+#include <linux/sched.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/bitops.h>
+#include <linux/of_dma.h>
+#include <linux/spinlock.h>
+
+#define REG_COMMAND		0
+#define REG_ARGUMENT		4
+#define REG_RESPONSE0		8
+#define REG_RESPONSE1		12
+#define REG_RESPONSE2		16
+#define REG_RESPONSE3		20
+#define REG_RESPONSE_COMMAND	24
+#define REG_DATA_CONTROL	28
+#define REG_DATA_TIMER		32
+#define REG_DATA_LENGTH		36
+#define REG_STATUS		40
+#define REG_CLEAR		44
+#define REG_INTERRUPT_MASK	48
+#define REG_POWER_CONTROL	52
+#define REG_CLOCK_CONTROL	56
+#define REG_BUS_WIDTH		60
+#define REG_DATA_WINDOW		64
+#define REG_FEATURE		68
+#define REG_REVISION		72
+
+/* REG_COMMAND */
+#define CMD_SDC_RESET		BIT(10)
+#define CMD_EN			BIT(9)
+#define CMD_APP_CMD		BIT(8)
+#define CMD_LONG_RSP		BIT(7)
+#define CMD_NEED_RSP		BIT(6)
+#define CMD_IDX_MASK		0x3f
+
+/* REG_RESPONSE_COMMAND */
+#define RSP_CMD_APP		BIT(6)
+#define RSP_CMD_IDX_MASK	0x3f
+
+/* REG_DATA_CONTROL */
+#define DCR_DATA_FIFO_RESET     BIT(8)
+#define DCR_DATA_THRES          BIT(7)
+#define DCR_DATA_EN		BIT(6)
+#define DCR_DMA_EN		BIT(5)
+#define DCR_DATA_WRITE		BIT(4)
+#define DCR_BLK_SIZE		0x0f
+
+/* REG_DATA_LENGTH */
+#define DATA_LEN_MASK		0xffffff
+
+/* REG_STATUS */
+#define WRITE_PROT		BIT(12)
+#define CARD_DETECT		BIT(11)
+/* 1-10 below can be sent to either registers, interrupt or clear. */
+#define CARD_CHANGE		BIT(10)
+#define FIFO_ORUN		BIT(9)
+#define FIFO_URUN		BIT(8)
+#define DATA_END		BIT(7)
+#define CMD_SENT		BIT(6)
+#define DATA_CRC_OK		BIT(5)
+#define RSP_CRC_OK		BIT(4)
+#define DATA_TIMEOUT		BIT(3)
+#define RSP_TIMEOUT		BIT(2)
+#define DATA_CRC_FAIL		BIT(1)
+#define RSP_CRC_FAIL		BIT(0)
+
+#define MASK_RSP		(RSP_TIMEOUT | RSP_CRC_FAIL | \
+				 RSP_CRC_OK  | CARD_DETECT  | CMD_SENT)
+
+#define MASK_DATA		(DATA_CRC_OK   | DATA_END | \
+				 DATA_CRC_FAIL | DATA_TIMEOUT)
+
+#define MASK_INTR_PIO		(FIFO_URUN | FIFO_ORUN | CARD_CHANGE)
+
+/* REG_POWER_CONTROL */
+#define SD_POWER_ON		BIT(4)
+#define SD_POWER_MASK		0x0f
+
+/* REG_CLOCK_CONTROL */
+#define CLK_HISPD		BIT(9)
+#define CLK_OFF			BIT(8)
+#define CLK_SD			BIT(7)
+#define CLK_DIV_MASK		0x7f
+
+/* REG_BUS_WIDTH */
+#define BUS_WIDTH_8		BIT(2)
+#define BUS_WIDTH_4		BIT(1)
+#define BUS_WIDTH_1		BIT(0)
+
+#define MMC_VDD_360		23
+#define MIN_POWER		(MMC_VDD_360 - SD_POWER_MASK)
+#define MAX_RETRIES		500000
+
+struct moxart_host {
+	spinlock_t			lock;
+
+	void __iomem			*base;
+
+	phys_addr_t			reg_phys;
+
+	struct dma_chan			*dma_chan_tx;
+	struct dma_chan                 *dma_chan_rx;
+	struct dma_async_tx_descriptor	*tx_desc;
+	struct mmc_host			*mmc;
+	struct mmc_request		*mrq;
+	struct scatterlist		*cur_sg;
+	struct completion		dma_complete;
+	struct completion		pio_complete;
+
+	u32				num_sg;
+	u32				data_remain;
+	u32				data_len;
+	u32				fifo_width;
+	u32				timeout;
+	u32				rate;
+
+	long				sysclk;
+
+	bool				have_dma;
+	bool				is_removed;
+};
+
+static inline void moxart_init_sg(struct moxart_host *host,
+				  struct mmc_data *data)
+{
+	host->cur_sg = data->sg;
+	host->num_sg = data->sg_len;
+	host->data_remain = host->cur_sg->length;
+
+	if (host->data_remain > host->data_len)
+		host->data_remain = host->data_len;
+}
+
+static inline int moxart_next_sg(struct moxart_host *host)
+{
+	int remain;
+	struct mmc_data *data = host->mrq->cmd->data;
+
+	host->cur_sg++;
+	host->num_sg--;
+
+	if (host->num_sg > 0) {
+		host->data_remain = host->cur_sg->length;
+		remain = host->data_len - data->bytes_xfered;
+		if (remain > 0 && remain < host->data_remain)
+			host->data_remain = remain;
+	}
+
+	return host->num_sg;
+}
+
+static int moxart_wait_for_status(struct moxart_host *host,
+				  u32 mask, u32 *status)
+{
+	int ret = -ETIMEDOUT;
+	u32 i;
+
+	for (i = 0; i < MAX_RETRIES; i++) {
+		*status = readl(host->base + REG_STATUS);
+		if (!(*status & mask)) {
+			udelay(5);
+			continue;
+		}
+		writel(*status & mask, host->base + REG_CLEAR);
+		ret = 0;
+		break;
+	}
+
+	if (ret)
+		dev_err(mmc_dev(host->mmc), "timed out waiting for status\n");
+
+	return ret;
+}
+
+
+static void moxart_send_command(struct moxart_host *host,
+	struct mmc_command *cmd)
+{
+	u32 status, cmdctrl;
+
+	writel(RSP_TIMEOUT  | RSP_CRC_OK |
+	       RSP_CRC_FAIL | CMD_SENT, host->base + REG_CLEAR);
+	writel(cmd->arg, host->base + REG_ARGUMENT);
+
+	cmdctrl = cmd->opcode & CMD_IDX_MASK;
+	if (cmdctrl == SD_APP_SET_BUS_WIDTH    || cmdctrl == SD_APP_OP_COND   ||
+	    cmdctrl == SD_APP_SEND_SCR         || cmdctrl == SD_APP_SD_STATUS ||
+	    cmdctrl == SD_APP_SEND_NUM_WR_BLKS)
+		cmdctrl |= CMD_APP_CMD;
+
+	if (cmd->flags & MMC_RSP_PRESENT)
+		cmdctrl |= CMD_NEED_RSP;
+
+	if (cmd->flags & MMC_RSP_136)
+		cmdctrl |= CMD_LONG_RSP;
+
+	writel(cmdctrl | CMD_EN, host->base + REG_COMMAND);
+
+	if (moxart_wait_for_status(host, MASK_RSP, &status) == -ETIMEDOUT)
+		cmd->error = -ETIMEDOUT;
+
+	if (status & RSP_TIMEOUT) {
+		cmd->error = -ETIMEDOUT;
+		return;
+	}
+	if (status & RSP_CRC_FAIL) {
+		cmd->error = -EIO;
+		return;
+	}
+	if (status & RSP_CRC_OK) {
+		if (cmd->flags & MMC_RSP_136) {
+			cmd->resp[3] = readl(host->base + REG_RESPONSE0);
+			cmd->resp[2] = readl(host->base + REG_RESPONSE1);
+			cmd->resp[1] = readl(host->base + REG_RESPONSE2);
+			cmd->resp[0] = readl(host->base + REG_RESPONSE3);
+		} else {
+			cmd->resp[0] = readl(host->base + REG_RESPONSE0);
+		}
+	}
+}
+
+static void moxart_dma_complete(void *param)
+{
+	struct moxart_host *host = param;
+
+	complete(&host->dma_complete);
+}
+
+static void moxart_transfer_dma(struct mmc_data *data, struct moxart_host *host)
+{
+	u32 len, dir_data, dir_slave;
+	unsigned long dma_time;
+	struct dma_async_tx_descriptor *desc = NULL;
+	struct dma_chan *dma_chan;
+
+	if (host->data_len == data->bytes_xfered)
+		return;
+
+	if (data->flags & MMC_DATA_WRITE) {
+		dma_chan = host->dma_chan_tx;
+		dir_data = DMA_TO_DEVICE;
+		dir_slave = DMA_MEM_TO_DEV;
+	} else {
+		dma_chan = host->dma_chan_rx;
+		dir_data = DMA_FROM_DEVICE;
+		dir_slave = DMA_DEV_TO_MEM;
+	}
+
+	len = dma_map_sg(dma_chan->device->dev, data->sg,
+			 data->sg_len, dir_data);
+
+	if (len > 0) {
+		desc = dmaengine_prep_slave_sg(dma_chan, data->sg,
+					       len, dir_slave,
+					       DMA_PREP_INTERRUPT |
+					       DMA_CTRL_ACK);
+	} else {
+		dev_err(mmc_dev(host->mmc), "dma_map_sg returned zero length\n");
+	}
+
+	if (desc) {
+		host->tx_desc = desc;
+		desc->callback = moxart_dma_complete;
+		desc->callback_param = host;
+		dmaengine_submit(desc);
+		dma_async_issue_pending(dma_chan);
+	}
+
+	data->bytes_xfered += host->data_remain;
+
+	dma_time = wait_for_completion_interruptible_timeout(
+		   &host->dma_complete, host->timeout);
+
+	dma_unmap_sg(dma_chan->device->dev,
+		     data->sg, data->sg_len,
+		     dir_data);
+}
+
+
+static void moxart_transfer_pio(struct moxart_host *host)
+{
+	struct mmc_data *data = host->mrq->cmd->data;
+	u32 *sgp, len = 0, remain, status;
+
+	if (host->data_len == data->bytes_xfered)
+		return;
+
+	sgp = sg_virt(host->cur_sg);
+	remain = host->data_remain;
+
+	if (data->flags & MMC_DATA_WRITE) {
+		while (remain > 0) {
+			if (moxart_wait_for_status(host, FIFO_URUN, &status)
+			     == -ETIMEDOUT) {
+				data->error = -ETIMEDOUT;
+				complete(&host->pio_complete);
+				return;
+			}
+			for (len = 0; len < remain && len < host->fifo_width;) {
+				iowrite32(*sgp, host->base + REG_DATA_WINDOW);
+				sgp++;
+				len += 4;
+			}
+			remain -= len;
+		}
+
+	} else {
+		while (remain > 0) {
+			if (moxart_wait_for_status(host, FIFO_ORUN, &status)
+			    == -ETIMEDOUT) {
+				data->error = -ETIMEDOUT;
+				complete(&host->pio_complete);
+				return;
+			}
+			for (len = 0; len < remain && len < host->fifo_width;) {
+				/* SCR data must be read in big endian. */
+				if (data->mrq->cmd->opcode == SD_APP_SEND_SCR)
+					*sgp = ioread32be(host->base +
+							  REG_DATA_WINDOW);
+				else
+					*sgp = ioread32(host->base +
+							REG_DATA_WINDOW);
+				sgp++;
+				len += 4;
+			}
+			remain -= len;
+		}
+	}
+
+	data->bytes_xfered += host->data_remain - remain;
+	host->data_remain = remain;
+
+	if (host->data_len != data->bytes_xfered)
+		moxart_next_sg(host);
+	else
+		complete(&host->pio_complete);
+}
+
+static void moxart_prepare_data(struct moxart_host *host)
+{
+	struct mmc_data *data = host->mrq->cmd->data;
+	u32 datactrl;
+	int blksz_bits;
+
+	if (!data)
+		return;
+
+	host->data_len = data->blocks * data->blksz;
+	blksz_bits = ffs(data->blksz) - 1;
+	BUG_ON(1 << blksz_bits != data->blksz);
+
+	moxart_init_sg(host, data);
+
+	datactrl = DCR_DATA_EN | (blksz_bits & DCR_BLK_SIZE);
+
+	if (data->flags & MMC_DATA_WRITE)
+		datactrl |= DCR_DATA_WRITE;
+
+	if ((host->data_len > host->fifo_width) && host->have_dma)
+		datactrl |= DCR_DMA_EN;
+
+	writel(DCR_DATA_FIFO_RESET, host->base + REG_DATA_CONTROL);
+	writel(MASK_DATA | FIFO_URUN | FIFO_ORUN, host->base + REG_CLEAR);
+	writel(host->rate, host->base + REG_DATA_TIMER);
+	writel(host->data_len, host->base + REG_DATA_LENGTH);
+	writel(datactrl, host->base + REG_DATA_CONTROL);
+}
+
+static void moxart_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct moxart_host *host = mmc_priv(mmc);
+	unsigned long pio_time, flags;
+	u32 status;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	init_completion(&host->dma_complete);
+	init_completion(&host->pio_complete);
+
+	host->mrq = mrq;
+
+	if (readl(host->base + REG_STATUS) & CARD_DETECT) {
+		mrq->cmd->error = -ETIMEDOUT;
+		goto request_done;
+	}
+
+	moxart_prepare_data(host);
+	moxart_send_command(host, host->mrq->cmd);
+
+	if (mrq->cmd->data) {
+		if ((host->data_len > host->fifo_width) && host->have_dma) {
+
+			writel(CARD_CHANGE, host->base + REG_INTERRUPT_MASK);
+
+			spin_unlock_irqrestore(&host->lock, flags);
+
+			moxart_transfer_dma(mrq->cmd->data, host);
+
+			spin_lock_irqsave(&host->lock, flags);
+		} else {
+
+			writel(MASK_INTR_PIO, host->base + REG_INTERRUPT_MASK);
+
+			spin_unlock_irqrestore(&host->lock, flags);
+
+			/* PIO transfers start from interrupt. */
+			pio_time = wait_for_completion_interruptible_timeout(
+				   &host->pio_complete, host->timeout);
+
+			spin_lock_irqsave(&host->lock, flags);
+		}
+
+		if (host->is_removed) {
+			dev_err(mmc_dev(host->mmc), "card removed\n");
+			mrq->cmd->error = -ETIMEDOUT;
+			goto request_done;
+		}
+
+		if (moxart_wait_for_status(host, MASK_DATA, &status)
+		    == -ETIMEDOUT) {
+			mrq->cmd->data->error = -ETIMEDOUT;
+			goto request_done;
+		}
+
+		if (status & DATA_CRC_FAIL)
+			mrq->cmd->data->error = -ETIMEDOUT;
+
+		if (mrq->cmd->data->stop)
+			moxart_send_command(host, mrq->cmd->data->stop);
+	}
+
+request_done:
+	spin_unlock_irqrestore(&host->lock, flags);
+	mmc_request_done(host->mmc, mrq);
+}
+
+static irqreturn_t moxart_irq(int irq, void *devid)
+{
+	struct moxart_host *host = (struct moxart_host *)devid;
+	u32 status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	status = readl(host->base + REG_STATUS);
+	if (status & CARD_CHANGE) {
+		host->is_removed = status & CARD_DETECT;
+		if (host->is_removed && host->have_dma) {
+			dmaengine_terminate_all(host->dma_chan_tx);
+			dmaengine_terminate_all(host->dma_chan_rx);
+		}
+		host->mrq = NULL;
+		writel(MASK_INTR_PIO, host->base + REG_CLEAR);
+		writel(CARD_CHANGE, host->base + REG_INTERRUPT_MASK);
+		mmc_detect_change(host->mmc, 0);
+	}
+	if (status & (FIFO_ORUN | FIFO_URUN) && host->mrq)
+		moxart_transfer_pio(host);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static void moxart_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct moxart_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	u8 power, div;
+	u32 ctrl;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (ios->clock) {
+		for (div = 0; div < CLK_DIV_MASK; ++div) {
+			if (ios->clock >= host->sysclk / (2 * (div + 1)))
+				break;
+		}
+		ctrl = CLK_SD | div;
+		host->rate = host->sysclk / (2 * (div + 1));
+		if (host->rate > host->sysclk)
+			ctrl |= CLK_HISPD;
+		writel(ctrl, host->base + REG_CLOCK_CONTROL);
+	}
+
+	if (ios->power_mode == MMC_POWER_OFF) {
+		writel(readl(host->base + REG_POWER_CONTROL) & ~SD_POWER_ON,
+		       host->base + REG_POWER_CONTROL);
+	} else {
+		if (ios->vdd < MIN_POWER)
+			power = 0;
+		else
+			power = ios->vdd - MIN_POWER;
+
+		writel(SD_POWER_ON | (u32) power,
+		       host->base + REG_POWER_CONTROL);
+	}
+
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_4:
+		writel(BUS_WIDTH_4, host->base + REG_BUS_WIDTH);
+		break;
+	case MMC_BUS_WIDTH_8:
+		writel(BUS_WIDTH_8, host->base + REG_BUS_WIDTH);
+		break;
+	default:
+		writel(BUS_WIDTH_1, host->base + REG_BUS_WIDTH);
+		break;
+	}
+
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+
+static int moxart_get_ro(struct mmc_host *mmc)
+{
+	struct moxart_host *host = mmc_priv(mmc);
+
+	return !!(readl(host->base + REG_STATUS) & WRITE_PROT);
+}
+
+static struct mmc_host_ops moxart_ops = {
+	.request = moxart_request,
+	.set_ios = moxart_set_ios,
+	.get_ro = moxart_get_ro,
+};
+
+static int moxart_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct resource res_mmc;
+	struct mmc_host *mmc;
+	struct moxart_host *host = NULL;
+	struct dma_slave_config cfg;
+	struct clk *clk;
+	void __iomem *reg_mmc;
+	dma_cap_mask_t mask;
+	int irq, ret;
+	u32 i;
+
+	mmc = mmc_alloc_host(sizeof(struct moxart_host), dev);
+	if (!mmc) {
+		dev_err(dev, "mmc_alloc_host failed\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = of_address_to_resource(node, 0, &res_mmc);
+	if (ret) {
+		dev_err(dev, "of_address_to_resource failed\n");
+		goto out;
+	}
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (irq <= 0) {
+		dev_err(dev, "irq_of_parse_and_map failed\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		dev_err(dev, "of_clk_get failed\n");
+		ret = PTR_ERR(clk);
+		goto out;
+	}
+
+	reg_mmc = devm_ioremap_resource(dev, &res_mmc);
+	if (IS_ERR(reg_mmc)) {
+		ret = PTR_ERR(reg_mmc);
+		goto out;
+	}
+
+	mmc_of_parse(mmc);
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->base = reg_mmc;
+	host->reg_phys = res_mmc.start;
+	host->timeout = msecs_to_jiffies(1000);
+	host->sysclk = clk_get_rate(clk);
+	host->fifo_width = readl(host->base + REG_FEATURE) << 2;
+	host->dma_chan_tx = of_dma_request_slave_channel(node, "tx");
+	host->dma_chan_rx = of_dma_request_slave_channel(node, "rx");
+
+	spin_lock_init(&host->lock);
+
+	mmc->ops = &moxart_ops;
+	mmc->f_max = DIV_ROUND_CLOSEST(host->sysclk, 2);
+	mmc->f_min = DIV_ROUND_CLOSEST(host->sysclk, CLK_DIV_MASK * 2);
+	mmc->ocr_avail = 0xffff00;	/* Support 2.0v - 3.6v power. */
+
+	if (IS_ERR(host->dma_chan_tx) || IS_ERR(host->dma_chan_rx)) {
+		dev_dbg(dev, "PIO mode transfer enabled\n");
+		host->have_dma = false;
+	} else {
+		dev_dbg(dev, "DMA channels found (%p,%p)\n",
+			 host->dma_chan_tx, host->dma_chan_rx);
+		host->have_dma = true;
+
+		cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+		cfg.direction = DMA_MEM_TO_DEV;
+		cfg.src_addr = 0;
+		cfg.dst_addr = host->reg_phys + REG_DATA_WINDOW;
+		dmaengine_slave_config(host->dma_chan_tx, &cfg);
+
+		cfg.direction = DMA_DEV_TO_MEM;
+		cfg.src_addr = host->reg_phys + REG_DATA_WINDOW;
+		cfg.dst_addr = 0;
+		dmaengine_slave_config(host->dma_chan_rx, &cfg);
+	}
+
+	switch ((readl(host->base + REG_BUS_WIDTH) >> 3) & 3) {
+	case 1:
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
+		break;
+	case 2:
+		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+		break;
+	default:
+		break;
+	}
+
+	writel(0, host->base + REG_INTERRUPT_MASK);
+
+	writel(CMD_SDC_RESET, host->base + REG_COMMAND);
+	for (i = 0; i < MAX_RETRIES; i++) {
+		if (!(readl(host->base + REG_COMMAND) & CMD_SDC_RESET))
+			break;
+		udelay(5);
+	}
+
+	ret = devm_request_irq(dev, irq, moxart_irq, 0, "moxart-mmc", host);
+	if (ret)
+		goto out;
+
+	dev_set_drvdata(dev, mmc);
+	mmc_add_host(mmc);
+
+	dev_dbg(dev, "IRQ=%d, FIFO is %d bytes\n", irq, host->fifo_width);
+
+	return 0;
+
+out:
+	if (mmc)
+		mmc_free_host(mmc);
+	return ret;
+}
+
+static int moxart_remove(struct platform_device *pdev)
+{
+	struct mmc_host *mmc = dev_get_drvdata(&pdev->dev);
+	struct moxart_host *host = mmc_priv(mmc);
+
+	dev_set_drvdata(&pdev->dev, NULL);
+
+	if (mmc) {
+		if (!IS_ERR(host->dma_chan_tx))
+			dma_release_channel(host->dma_chan_tx);
+		if (!IS_ERR(host->dma_chan_rx))
+			dma_release_channel(host->dma_chan_rx);
+		mmc_remove_host(mmc);
+		mmc_free_host(mmc);
+
+		writel(0, host->base + REG_INTERRUPT_MASK);
+		writel(0, host->base + REG_POWER_CONTROL);
+		writel(readl(host->base + REG_CLOCK_CONTROL) | CLK_OFF,
+		       host->base + REG_CLOCK_CONTROL);
+	}
+
+	kfree(host);
+
+	return 0;
+}
+
+static const struct of_device_id moxart_mmc_match[] = {
+	{ .compatible = "moxa,moxart-mmc" },
+	{ .compatible = "faraday,ftsdc010" },
+	{ }
+};
+
+static struct platform_driver moxart_mmc_driver = {
+	.probe      = moxart_probe,
+	.remove     = moxart_remove,
+	.driver     = {
+		.name		= "mmc-moxart",
+		.of_match_table	= moxart_mmc_match,
+	},
+};
+module_platform_driver(moxart_mmc_driver);
+
+MODULE_ALIAS("platform:mmc-moxart");
+MODULE_DESCRIPTION("MOXA ART MMC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");

drivers/mmc/host/msm_sdcc.h

@@ -0,0 +1,256 @@
+/*
+ *  linux/drivers/mmc/host/msmsdcc.h - QCT MSM7K SDC Controller
+ *
+ *  Copyright (C) 2008 Google, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * - Based on mmci.h
+ */
+
+#ifndef _MSM_SDCC_H
+#define _MSM_SDCC_H
+
+#define MSMSDCC_CRCI_SDC1	6
+#define MSMSDCC_CRCI_SDC2	7
+#define MSMSDCC_CRCI_SDC3	12
+#define MSMSDCC_CRCI_SDC4	13
+
+#define MMCIPOWER		0x000
+#define MCI_PWR_OFF		0x00
+#define MCI_PWR_UP		0x02
+#define MCI_PWR_ON		0x03
+#define MCI_OD			(1 << 6)
+
+#define MMCICLOCK		0x004
+#define MCI_CLK_ENABLE		(1 << 8)
+#define MCI_CLK_PWRSAVE		(1 << 9)
+#define MCI_CLK_WIDEBUS		(1 << 10)
+#define MCI_CLK_FLOWENA		(1 << 12)
+#define MCI_CLK_INVERTOUT	(1 << 13)
+#define MCI_CLK_SELECTIN	(1 << 14)
+
+#define MMCIARGUMENT		0x008
+#define MMCICOMMAND		0x00c
+#define MCI_CPSM_RESPONSE	(1 << 6)
+#define MCI_CPSM_LONGRSP	(1 << 7)
+#define MCI_CPSM_INTERRUPT	(1 << 8)
+#define MCI_CPSM_PENDING	(1 << 9)
+#define MCI_CPSM_ENABLE		(1 << 10)
+#define MCI_CPSM_PROGENA	(1 << 11)
+#define MCI_CSPM_DATCMD		(1 << 12)
+#define MCI_CSPM_MCIABORT	(1 << 13)
+#define MCI_CSPM_CCSENABLE	(1 << 14)
+#define MCI_CSPM_CCSDISABLE	(1 << 15)
+
+
+#define MMCIRESPCMD		0x010
+#define MMCIRESPONSE0		0x014
+#define MMCIRESPONSE1		0x018
+#define MMCIRESPONSE2		0x01c
+#define MMCIRESPONSE3		0x020
+#define MMCIDATATIMER		0x024
+#define MMCIDATALENGTH		0x028
+
+#define MMCIDATACTRL		0x02c
+#define MCI_DPSM_ENABLE		(1 << 0)
+#define MCI_DPSM_DIRECTION	(1 << 1)
+#define MCI_DPSM_MODE		(1 << 2)
+#define MCI_DPSM_DMAENABLE	(1 << 3)
+
+#define MMCIDATACNT		0x030
+#define MMCISTATUS		0x034
+#define MCI_CMDCRCFAIL		(1 << 0)
+#define MCI_DATACRCFAIL		(1 << 1)
+#define MCI_CMDTIMEOUT		(1 << 2)
+#define MCI_DATATIMEOUT		(1 << 3)
+#define MCI_TXUNDERRUN		(1 << 4)
+#define MCI_RXOVERRUN		(1 << 5)
+#define MCI_CMDRESPEND		(1 << 6)
+#define MCI_CMDSENT		(1 << 7)
+#define MCI_DATAEND		(1 << 8)
+#define MCI_DATABLOCKEND	(1 << 10)
+#define MCI_CMDACTIVE		(1 << 11)
+#define MCI_TXACTIVE		(1 << 12)
+#define MCI_RXACTIVE		(1 << 13)
+#define MCI_TXFIFOHALFEMPTY	(1 << 14)
+#define MCI_RXFIFOHALFFULL	(1 << 15)
+#define MCI_TXFIFOFULL		(1 << 16)
+#define MCI_RXFIFOFULL		(1 << 17)
+#define MCI_TXFIFOEMPTY		(1 << 18)
+#define MCI_RXFIFOEMPTY		(1 << 19)
+#define MCI_TXDATAAVLBL		(1 << 20)
+#define MCI_RXDATAAVLBL		(1 << 21)
+#define MCI_SDIOINTR		(1 << 22)
+#define MCI_PROGDONE		(1 << 23)
+#define MCI_ATACMDCOMPL		(1 << 24)
+#define MCI_SDIOINTOPER		(1 << 25)
+#define MCI_CCSTIMEOUT		(1 << 26)
+
+#define MMCICLEAR		0x038
+#define MCI_CMDCRCFAILCLR	(1 << 0)
+#define MCI_DATACRCFAILCLR	(1 << 1)
+#define MCI_CMDTIMEOUTCLR	(1 << 2)
+#define MCI_DATATIMEOUTCLR	(1 << 3)
+#define MCI_TXUNDERRUNCLR	(1 << 4)
+#define MCI_RXOVERRUNCLR	(1 << 5)
+#define MCI_CMDRESPENDCLR	(1 << 6)
+#define MCI_CMDSENTCLR		(1 << 7)
+#define MCI_DATAENDCLR		(1 << 8)
+#define MCI_DATABLOCKENDCLR	(1 << 10)
+
+#define MMCIMASK0		0x03c
+#define MCI_CMDCRCFAILMASK	(1 << 0)
+#define MCI_DATACRCFAILMASK	(1 << 1)
+#define MCI_CMDTIMEOUTMASK	(1 << 2)
+#define MCI_DATATIMEOUTMASK	(1 << 3)
+#define MCI_TXUNDERRUNMASK	(1 << 4)
+#define MCI_RXOVERRUNMASK	(1 << 5)
+#define MCI_CMDRESPENDMASK	(1 << 6)
+#define MCI_CMDSENTMASK		(1 << 7)
+#define MCI_DATAENDMASK		(1 << 8)
+#define MCI_DATABLOCKENDMASK	(1 << 10)
+#define MCI_CMDACTIVEMASK	(1 << 11)
+#define MCI_TXACTIVEMASK	(1 << 12)
+#define MCI_RXACTIVEMASK	(1 << 13)
+#define MCI_TXFIFOHALFEMPTYMASK	(1 << 14)
+#define MCI_RXFIFOHALFFULLMASK	(1 << 15)
+#define MCI_TXFIFOFULLMASK	(1 << 16)
+#define MCI_RXFIFOFULLMASK	(1 << 17)
+#define MCI_TXFIFOEMPTYMASK	(1 << 18)
+#define MCI_RXFIFOEMPTYMASK	(1 << 19)
+#define MCI_TXDATAAVLBLMASK	(1 << 20)
+#define MCI_RXDATAAVLBLMASK	(1 << 21)
+#define MCI_SDIOINTMASK		(1 << 22)
+#define MCI_PROGDONEMASK	(1 << 23)
+#define MCI_ATACMDCOMPLMASK	(1 << 24)
+#define MCI_SDIOINTOPERMASK	(1 << 25)
+#define MCI_CCSTIMEOUTMASK	(1 << 26)
+
+#define MMCIMASK1		0x040
+#define MMCIFIFOCNT		0x044
+#define MCICCSTIMER		0x058
+
+#define MMCIFIFO		0x080 /* to 0x0bc */
+
+#define MCI_IRQENABLE	\
+	(MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK|	\
+	MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK|	\
+	MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATAENDMASK|MCI_PROGDONEMASK)
+
+#define MCI_IRQ_PIO \
+	(MCI_RXDATAAVLBLMASK | MCI_TXDATAAVLBLMASK | MCI_RXFIFOEMPTYMASK | \
+	 MCI_TXFIFOEMPTYMASK | MCI_RXFIFOFULLMASK | MCI_TXFIFOFULLMASK | \
+	 MCI_RXFIFOHALFFULLMASK | MCI_TXFIFOHALFEMPTYMASK | \
+	 MCI_RXACTIVEMASK | MCI_TXACTIVEMASK)
+/*
+ * The size of the FIFO in bytes.
+ */
+#define MCI_FIFOSIZE	(16*4)
+
+#define MCI_FIFOHALFSIZE (MCI_FIFOSIZE / 2)
+
+#define NR_SG		32
+
+struct clk;
+
+struct msmsdcc_nc_dmadata {
+	dmov_box	cmd[NR_SG];
+	uint32_t	cmdptr;
+};
+
+struct msmsdcc_dma_data {
+	struct msmsdcc_nc_dmadata	*nc;
+	dma_addr_t			nc_busaddr;
+	dma_addr_t			cmd_busaddr;
+	dma_addr_t			cmdptr_busaddr;
+
+	struct msm_dmov_cmd		hdr;
+	enum dma_data_direction		dir;
+
+	struct scatterlist		*sg;
+	int				num_ents;
+
+	int				channel;
+	struct msmsdcc_host		*host;
+	int				busy; /* Set if DM is busy */
+	int				active;
+	unsigned int			result;
+	struct msm_dmov_errdata		err;
+};
+
+struct msmsdcc_pio_data {
+	struct scatterlist	*sg;
+	unsigned int		sg_len;
+	unsigned int		sg_off;
+};
+
+struct msmsdcc_curr_req {
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+	unsigned int		xfer_size;	/* Total data size */
+	unsigned int		xfer_remain;	/* Bytes remaining to send */
+	unsigned int		data_xfered;	/* Bytes acked by BLKEND irq */
+	int			got_dataend;
+	int			user_pages;
+};
+
+struct msmsdcc_stats {
+	unsigned int reqs;
+	unsigned int cmds;
+	unsigned int cmdpoll_hits;
+	unsigned int cmdpoll_misses;
+};
+
+struct msmsdcc_host {
+	struct resource		*cmd_irqres;
+	struct resource		*memres;
+	struct resource		*dmares;
+	void __iomem		*base;
+	int			pdev_id;
+	unsigned int		stat_irq;
+
+	struct msmsdcc_curr_req	curr;
+
+	struct mmc_host		*mmc;
+	struct clk		*clk;		/* main MMC bus clock */
+	struct clk		*pclk;		/* SDCC peripheral bus clock */
+	unsigned int		clks_on;	/* set if clocks are enabled */
+	struct timer_list	busclk_timer;
+
+	unsigned int		eject;		/* eject state */
+
+	spinlock_t		lock;
+
+	unsigned int		clk_rate;	/* Current clock rate */
+	unsigned int		pclk_rate;
+
+	u32			pwr;
+	u32			saved_irq0mask;	/* MMCIMASK0 reg value */
+	struct msm_mmc_platform_data *plat;
+
+	struct timer_list	timer;
+	unsigned int		oldstat;
+
+	struct msmsdcc_dma_data	dma;
+	struct msmsdcc_pio_data	pio;
+	int			cmdpoll;
+	struct msmsdcc_stats	stats;
+
+	struct tasklet_struct	dma_tlet;
+	/* Command parameters */
+	unsigned int		cmd_timeout;
+	unsigned int		cmd_pio_irqmask;
+	unsigned int		cmd_datactrl;
+	struct mmc_command	*cmd_cmd;
+	u32			cmd_c;
+	bool			gpio_config_status;
+
+	bool prog_scan;
+	bool prog_enable;
+};
+
+#endif

drivers/mmc/host/mvsdio.c

@@ -0,0 +1,881 @@
+/*
+ * Marvell MMC/SD/SDIO driver
+ *
+ * Authors: Maen Suleiman, Nicolas Pitre
+ * Copyright (C) 2008-2009 Marvell Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/mbus.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/pinctrl/consumer.h>
+
+#include <asm/sizes.h>
+#include <asm/unaligned.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+
+#include "mvsdio.h"
+
+#define DRIVER_NAME	"mvsdio"
+
+static int maxfreq;
+static int nodma;
+
+struct mvsd_host {
+	void __iomem *base;
+	struct mmc_request *mrq;
+	spinlock_t lock;
+	unsigned int xfer_mode;
+	unsigned int intr_en;
+	unsigned int ctrl;
+	unsigned int pio_size;
+	void *pio_ptr;
+	unsigned int sg_frags;
+	unsigned int ns_per_clk;
+	unsigned int clock;
+	unsigned int base_clock;
+	struct timer_list timer;
+	struct mmc_host *mmc;
+	struct device *dev;
+	struct clk *clk;
+};
+
+#define mvsd_write(offs, val)	writel(val, iobase + (offs))
+#define mvsd_read(offs)		readl(iobase + (offs))
+
+static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
+{
+	void __iomem *iobase = host->base;
+	unsigned int tmout;
+	int tmout_index;
+
+	/*
+	 * Hardware weirdness.  The FIFO_EMPTY bit of the HW_STATE
+	 * register is sometimes not set before a while when some
+	 * "unusual" data block sizes are used (such as with the SWITCH
+	 * command), even despite the fact that the XFER_DONE interrupt
+	 * was raised.  And if another data transfer starts before
+	 * this bit comes to good sense (which eventually happens by
+	 * itself) then the new transfer simply fails with a timeout.
+	 */
+	if (!(mvsd_read(MVSD_HW_STATE) & (1 << 13))) {
+		unsigned long t = jiffies + HZ;
+		unsigned int hw_state,  count = 0;
+		do {
+			hw_state = mvsd_read(MVSD_HW_STATE);
+			if (time_after(jiffies, t)) {
+				dev_warn(host->dev, "FIFO_EMPTY bit missing\n");
+				break;
+			}
+			count++;
+		} while (!(hw_state & (1 << 13)));
+		dev_dbg(host->dev, "*** wait for FIFO_EMPTY bit "
+				   "(hw=0x%04x, count=%d, jiffies=%ld)\n",
+				   hw_state, count, jiffies - (t - HZ));
+	}
+
+	/* If timeout=0 then maximum timeout index is used. */
+	tmout = DIV_ROUND_UP(data->timeout_ns, host->ns_per_clk);
+	tmout += data->timeout_clks;
+	tmout_index = fls(tmout - 1) - 12;
+	if (tmout_index < 0)
+		tmout_index = 0;
+	if (tmout_index > MVSD_HOST_CTRL_TMOUT_MAX)
+		tmout_index = MVSD_HOST_CTRL_TMOUT_MAX;
+
+	dev_dbg(host->dev, "data %s at 0x%08x: blocks=%d blksz=%d tmout=%u (%d)\n",
+		(data->flags & MMC_DATA_READ) ? "read" : "write",
+		(u32)sg_virt(data->sg), data->blocks, data->blksz,
+		tmout, tmout_index);
+
+	host->ctrl &= ~MVSD_HOST_CTRL_TMOUT_MASK;
+	host->ctrl |= MVSD_HOST_CTRL_TMOUT(tmout_index);
+	mvsd_write(MVSD_HOST_CTRL, host->ctrl);
+	mvsd_write(MVSD_BLK_COUNT, data->blocks);
+	mvsd_write(MVSD_BLK_SIZE, data->blksz);
+
+	if (nodma || (data->blksz | data->sg->offset) & 3) {
+		/*
+		 * We cannot do DMA on a buffer which offset or size
+		 * is not aligned on a 4-byte boundary.
+		 */
+		host->pio_size = data->blocks * data->blksz;
+		host->pio_ptr = sg_virt(data->sg);
+		if (!nodma)
+			dev_dbg(host->dev, "fallback to PIO for data at 0x%p size %d\n",
+				host->pio_ptr, host->pio_size);
+		return 1;
+	} else {
+		dma_addr_t phys_addr;
+		int dma_dir = (data->flags & MMC_DATA_READ) ?
+			DMA_FROM_DEVICE : DMA_TO_DEVICE;
+		host->sg_frags = dma_map_sg(mmc_dev(host->mmc), data->sg,
+					    data->sg_len, dma_dir);
+		phys_addr = sg_dma_address(data->sg);
+		mvsd_write(MVSD_SYS_ADDR_LOW, (u32)phys_addr & 0xffff);
+		mvsd_write(MVSD_SYS_ADDR_HI,  (u32)phys_addr >> 16);
+		return 0;
+	}
+}
+
+static void mvsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct mvsd_host *host = mmc_priv(mmc);
+	void __iomem *iobase = host->base;
+	struct mmc_command *cmd = mrq->cmd;
+	u32 cmdreg = 0, xfer = 0, intr = 0;
+	unsigned long flags;
+
+	BUG_ON(host->mrq != NULL);
+	host->mrq = mrq;
+
+	dev_dbg(host->dev, "cmd %d (hw state 0x%04x)\n",
+		cmd->opcode, mvsd_read(MVSD_HW_STATE));
+
+	cmdreg = MVSD_CMD_INDEX(cmd->opcode);
+
+	if (cmd->flags & MMC_RSP_BUSY)
+		cmdreg |= MVSD_CMD_RSP_48BUSY;
+	else if (cmd->flags & MMC_RSP_136)
+		cmdreg |= MVSD_CMD_RSP_136;
+	else if (cmd->flags & MMC_RSP_PRESENT)
+		cmdreg |= MVSD_CMD_RSP_48;
+	else
+		cmdreg |= MVSD_CMD_RSP_NONE;
+
+	if (cmd->flags & MMC_RSP_CRC)
+		cmdreg |= MVSD_CMD_CHECK_CMDCRC;
+
+	if (cmd->flags & MMC_RSP_OPCODE)
+		cmdreg |= MVSD_CMD_INDX_CHECK;
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		cmdreg |= MVSD_UNEXPECTED_RESP;
+		intr |= MVSD_NOR_UNEXP_RSP;
+	}
+
+	if (mrq->data) {
+		struct mmc_data *data = mrq->data;
+		int pio;
+
+		cmdreg |= MVSD_CMD_DATA_PRESENT | MVSD_CMD_CHECK_DATACRC16;
+		xfer |= MVSD_XFER_MODE_HW_WR_DATA_EN;
+		if (data->flags & MMC_DATA_READ)
+			xfer |= MVSD_XFER_MODE_TO_HOST;
+
+		pio = mvsd_setup_data(host, data);
+		if (pio) {
+			xfer |= MVSD_XFER_MODE_PIO;
+			/* PIO section of mvsd_irq has comments on those bits */
+			if (data->flags & MMC_DATA_WRITE)
+				intr |= MVSD_NOR_TX_AVAIL;
+			else if (host->pio_size > 32)
+				intr |= MVSD_NOR_RX_FIFO_8W;
+			else
+				intr |= MVSD_NOR_RX_READY;
+		}
+
+		if (data->stop) {
+			struct mmc_command *stop = data->stop;
+			u32 cmd12reg = 0;
+
+			mvsd_write(MVSD_AUTOCMD12_ARG_LOW, stop->arg & 0xffff);
+			mvsd_write(MVSD_AUTOCMD12_ARG_HI,  stop->arg >> 16);
+
+			if (stop->flags & MMC_RSP_BUSY)
+				cmd12reg |= MVSD_AUTOCMD12_BUSY;
+			if (stop->flags & MMC_RSP_OPCODE)
+				cmd12reg |= MVSD_AUTOCMD12_INDX_CHECK;
+			cmd12reg |= MVSD_AUTOCMD12_INDEX(stop->opcode);
+			mvsd_write(MVSD_AUTOCMD12_CMD, cmd12reg);
+
+			xfer |= MVSD_XFER_MODE_AUTO_CMD12;
+			intr |= MVSD_NOR_AUTOCMD12_DONE;
+		} else {
+			intr |= MVSD_NOR_XFER_DONE;
+		}
+	} else {
+		intr |= MVSD_NOR_CMD_DONE;
+	}
+
+	mvsd_write(MVSD_ARG_LOW, cmd->arg & 0xffff);
+	mvsd_write(MVSD_ARG_HI,  cmd->arg >> 16);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	host->xfer_mode &= MVSD_XFER_MODE_INT_CHK_EN;
+	host->xfer_mode |= xfer;
+	mvsd_write(MVSD_XFER_MODE, host->xfer_mode);
+
+	mvsd_write(MVSD_NOR_INTR_STATUS, ~MVSD_NOR_CARD_INT);
+	mvsd_write(MVSD_ERR_INTR_STATUS, 0xffff);
+	mvsd_write(MVSD_CMD, cmdreg);
+
+	host->intr_en &= MVSD_NOR_CARD_INT;
+	host->intr_en |= intr | MVSD_NOR_ERROR;
+	mvsd_write(MVSD_NOR_INTR_EN, host->intr_en);
+	mvsd_write(MVSD_ERR_INTR_EN, 0xffff);
+
+	mod_timer(&host->timer, jiffies + 5 * HZ);
+
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static u32 mvsd_finish_cmd(struct mvsd_host *host, struct mmc_command *cmd,
+			   u32 err_status)
+{
+	void __iomem *iobase = host->base;
+
+	if (cmd->flags & MMC_RSP_136) {
+		unsigned int response[8], i;
+		for (i = 0; i < 8; i++)
+			response[i] = mvsd_read(MVSD_RSP(i));
+		cmd->resp[0] =		((response[0] & 0x03ff) << 22) |
+					((response[1] & 0xffff) << 6) |
+					((response[2] & 0xfc00) >> 10);
+		cmd->resp[1] =		((response[2] & 0x03ff) << 22) |
+					((response[3] & 0xffff) << 6) |
+					((response[4] & 0xfc00) >> 10);
+		cmd->resp[2] =		((response[4] & 0x03ff) << 22) |
+					((response[5] & 0xffff) << 6) |
+					((response[6] & 0xfc00) >> 10);
+		cmd->resp[3] =		((response[6] & 0x03ff) << 22) |
+					((response[7] & 0x3fff) << 8);
+	} else if (cmd->flags & MMC_RSP_PRESENT) {
+		unsigned int response[3], i;
+		for (i = 0; i < 3; i++)
+			response[i] = mvsd_read(MVSD_RSP(i));
+		cmd->resp[0] =		((response[2] & 0x003f) << (8 - 8)) |
+					((response[1] & 0xffff) << (14 - 8)) |
+					((response[0] & 0x03ff) << (30 - 8));
+		cmd->resp[1] =		((response[0] & 0xfc00) >> 10);
+		cmd->resp[2] = 0;
+		cmd->resp[3] = 0;
+	}
+
+	if (err_status & MVSD_ERR_CMD_TIMEOUT) {
+		cmd->error = -ETIMEDOUT;
+	} else if (err_status & (MVSD_ERR_CMD_CRC | MVSD_ERR_CMD_ENDBIT |
+				 MVSD_ERR_CMD_INDEX | MVSD_ERR_CMD_STARTBIT)) {
+		cmd->error = -EILSEQ;
+	}
+	err_status &= ~(MVSD_ERR_CMD_TIMEOUT | MVSD_ERR_CMD_CRC |
+			MVSD_ERR_CMD_ENDBIT | MVSD_ERR_CMD_INDEX |
+			MVSD_ERR_CMD_STARTBIT);
+
+	return err_status;
+}
+
+static u32 mvsd_finish_data(struct mvsd_host *host, struct mmc_data *data,
+			    u32 err_status)
+{
+	void __iomem *iobase = host->base;
+
+	if (host->pio_ptr) {
+		host->pio_ptr = NULL;
+		host->pio_size = 0;
+	} else {
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_frags,
+			     (data->flags & MMC_DATA_READ) ?
+				DMA_FROM_DEVICE : DMA_TO_DEVICE);
+	}
+
+	if (err_status & MVSD_ERR_DATA_TIMEOUT)
+		data->error = -ETIMEDOUT;
+	else if (err_status & (MVSD_ERR_DATA_CRC | MVSD_ERR_DATA_ENDBIT))
+		data->error = -EILSEQ;
+	else if (err_status & MVSD_ERR_XFER_SIZE)
+		data->error = -EBADE;
+	err_status &= ~(MVSD_ERR_DATA_TIMEOUT | MVSD_ERR_DATA_CRC |
+			MVSD_ERR_DATA_ENDBIT | MVSD_ERR_XFER_SIZE);
+
+	dev_dbg(host->dev, "data done: blocks_left=%d, bytes_left=%d\n",
+		mvsd_read(MVSD_CURR_BLK_LEFT), mvsd_read(MVSD_CURR_BYTE_LEFT));
+	data->bytes_xfered =
+		(data->blocks - mvsd_read(MVSD_CURR_BLK_LEFT)) * data->blksz;
+	/* We can't be sure about the last block when errors are detected */
+	if (data->bytes_xfered && data->error)
+		data->bytes_xfered -= data->blksz;
+
+	/* Handle Auto cmd 12 response */
+	if (data->stop) {
+		unsigned int response[3], i;
+		for (i = 0; i < 3; i++)
+			response[i] = mvsd_read(MVSD_AUTO_RSP(i));
+		data->stop->resp[0] =	((response[2] & 0x003f) << (8 - 8)) |
+					((response[1] & 0xffff) << (14 - 8)) |
+					((response[0] & 0x03ff) << (30 - 8));
+		data->stop->resp[1] =	((response[0] & 0xfc00) >> 10);
+		data->stop->resp[2] = 0;
+		data->stop->resp[3] = 0;
+
+		if (err_status & MVSD_ERR_AUTOCMD12) {
+			u32 err_cmd12 = mvsd_read(MVSD_AUTOCMD12_ERR_STATUS);
+			dev_dbg(host->dev, "c12err 0x%04x\n", err_cmd12);
+			if (err_cmd12 & MVSD_AUTOCMD12_ERR_NOTEXE)
+				data->stop->error = -ENOEXEC;
+			else if (err_cmd12 & MVSD_AUTOCMD12_ERR_TIMEOUT)
+				data->stop->error = -ETIMEDOUT;
+			else if (err_cmd12)
+				data->stop->error = -EILSEQ;
+			err_status &= ~MVSD_ERR_AUTOCMD12;
+		}
+	}
+
+	return err_status;
+}
+
+static irqreturn_t mvsd_irq(int irq, void *dev)
+{
+	struct mvsd_host *host = dev;
+	void __iomem *iobase = host->base;
+	u32 intr_status, intr_done_mask;
+	int irq_handled = 0;
+
+	intr_status = mvsd_read(MVSD_NOR_INTR_STATUS);
+	dev_dbg(host->dev, "intr 0x%04x intr_en 0x%04x hw_state 0x%04x\n",
+		intr_status, mvsd_read(MVSD_NOR_INTR_EN),
+		mvsd_read(MVSD_HW_STATE));
+
+	/*
+	 * It looks like, SDIO IP can issue one late, spurious irq
+	 * although all irqs should be disabled. To work around this,
+	 * bail out early, if we didn't expect any irqs to occur.
+	 */
+	if (!mvsd_read(MVSD_NOR_INTR_EN) && !mvsd_read(MVSD_ERR_INTR_EN)) {
+		dev_dbg(host->dev, "spurious irq detected intr 0x%04x intr_en 0x%04x erri 0x%04x erri_en 0x%04x\n",
+			mvsd_read(MVSD_NOR_INTR_STATUS),
+			mvsd_read(MVSD_NOR_INTR_EN),
+			mvsd_read(MVSD_ERR_INTR_STATUS),
+			mvsd_read(MVSD_ERR_INTR_EN));
+		return IRQ_HANDLED;
+	}
+
+	spin_lock(&host->lock);
+
+	/* PIO handling, if needed. Messy business... */
+	if (host->pio_size &&
+	    (intr_status & host->intr_en &
+	     (MVSD_NOR_RX_READY | MVSD_NOR_RX_FIFO_8W))) {
+		u16 *p = host->pio_ptr;
+		int s = host->pio_size;
+		while (s >= 32 && (intr_status & MVSD_NOR_RX_FIFO_8W)) {
+			readsw(iobase + MVSD_FIFO, p, 16);
+			p += 16;
+			s -= 32;
+			intr_status = mvsd_read(MVSD_NOR_INTR_STATUS);
+		}
+		/*
+		 * Normally we'd use < 32 here, but the RX_FIFO_8W bit
+		 * doesn't appear to assert when there is exactly 32 bytes
+		 * (8 words) left to fetch in a transfer.
+		 */
+		if (s <= 32) {
+			while (s >= 4 && (intr_status & MVSD_NOR_RX_READY)) {
+				put_unaligned(mvsd_read(MVSD_FIFO), p++);
+				put_unaligned(mvsd_read(MVSD_FIFO), p++);
+				s -= 4;
+				intr_status = mvsd_read(MVSD_NOR_INTR_STATUS);
+			}
+			if (s && s < 4 && (intr_status & MVSD_NOR_RX_READY)) {
+				u16 val[2] = {0, 0};
+				val[0] = mvsd_read(MVSD_FIFO);
+				val[1] = mvsd_read(MVSD_FIFO);
+				memcpy(p, ((void *)&val) + 4 - s, s);
+				s = 0;
+				intr_status = mvsd_read(MVSD_NOR_INTR_STATUS);
+			}
+			if (s == 0) {
+				host->intr_en &=
+				     ~(MVSD_NOR_RX_READY | MVSD_NOR_RX_FIFO_8W);
+				mvsd_write(MVSD_NOR_INTR_EN, host->intr_en);
+			} else if (host->intr_en & MVSD_NOR_RX_FIFO_8W) {
+				host->intr_en &= ~MVSD_NOR_RX_FIFO_8W;
+				host->intr_en |= MVSD_NOR_RX_READY;
+				mvsd_write(MVSD_NOR_INTR_EN, host->intr_en);
+			}
+		}
+		dev_dbg(host->dev, "pio %d intr 0x%04x hw_state 0x%04x\n",
+			s, intr_status, mvsd_read(MVSD_HW_STATE));
+		host->pio_ptr = p;
+		host->pio_size = s;
+		irq_handled = 1;
+	} else if (host->pio_size &&
+		   (intr_status & host->intr_en &
+		    (MVSD_NOR_TX_AVAIL | MVSD_NOR_TX_FIFO_8W))) {
+		u16 *p = host->pio_ptr;
+		int s = host->pio_size;
+		/*
+		 * The TX_FIFO_8W bit is unreliable. When set, bursting
+		 * 16 halfwords all at once in the FIFO drops data. Actually
+		 * TX_AVAIL does go off after only one word is pushed even if
+		 * TX_FIFO_8W remains set.
+		 */
+		while (s >= 4 && (intr_status & MVSD_NOR_TX_AVAIL)) {
+			mvsd_write(MVSD_FIFO, get_unaligned(p++));
+			mvsd_write(MVSD_FIFO, get_unaligned(p++));
+			s -= 4;
+			intr_status = mvsd_read(MVSD_NOR_INTR_STATUS);
+		}
+		if (s < 4) {
+			if (s && (intr_status & MVSD_NOR_TX_AVAIL)) {
+				u16 val[2] = {0, 0};
+				memcpy(((void *)&val) + 4 - s, p, s);
+				mvsd_write(MVSD_FIFO, val[0]);
+				mvsd_write(MVSD_FIFO, val[1]);
+				s = 0;
+				intr_status = mvsd_read(MVSD_NOR_INTR_STATUS);
+			}
+			if (s == 0) {
+				host->intr_en &=
+				     ~(MVSD_NOR_TX_AVAIL | MVSD_NOR_TX_FIFO_8W);
+				mvsd_write(MVSD_NOR_INTR_EN, host->intr_en);
+			}
+		}
+		dev_dbg(host->dev, "pio %d intr 0x%04x hw_state 0x%04x\n",
+			s, intr_status, mvsd_read(MVSD_HW_STATE));
+		host->pio_ptr = p;
+		host->pio_size = s;
+		irq_handled = 1;
+	}
+
+	mvsd_write(MVSD_NOR_INTR_STATUS, intr_status);
+
+	intr_done_mask = MVSD_NOR_CARD_INT | MVSD_NOR_RX_READY |
+			 MVSD_NOR_RX_FIFO_8W | MVSD_NOR_TX_FIFO_8W;
+	if (intr_status & host->intr_en & ~intr_done_mask) {
+		struct mmc_request *mrq = host->mrq;
+		struct mmc_command *cmd = mrq->cmd;
+		u32 err_status = 0;
+
+		del_timer(&host->timer);
+		host->mrq = NULL;
+
+		host->intr_en &= MVSD_NOR_CARD_INT;
+		mvsd_write(MVSD_NOR_INTR_EN, host->intr_en);
+		mvsd_write(MVSD_ERR_INTR_EN, 0);
+
+		spin_unlock(&host->lock);
+
+		if (intr_status & MVSD_NOR_UNEXP_RSP) {
+			cmd->error = -EPROTO;
+		} else if (intr_status & MVSD_NOR_ERROR) {
+			err_status = mvsd_read(MVSD_ERR_INTR_STATUS);
+			dev_dbg(host->dev, "err 0x%04x\n", err_status);
+		}
+
+		err_status = mvsd_finish_cmd(host, cmd, err_status);
+		if (mrq->data)
+			err_status = mvsd_finish_data(host, mrq->data, err_status);
+		if (err_status) {
+			dev_err(host->dev, "unhandled error status %#04x\n",
+				err_status);
+			cmd->error = -ENOMSG;
+		}
+
+		mmc_request_done(host->mmc, mrq);
+		irq_handled = 1;
+	} else
+		spin_unlock(&host->lock);
+
+	if (intr_status & MVSD_NOR_CARD_INT) {
+		mmc_signal_sdio_irq(host->mmc);
+		irq_handled = 1;
+	}
+
+	if (irq_handled)
+		return IRQ_HANDLED;
+
+	dev_err(host->dev, "unhandled interrupt status=0x%04x en=0x%04x pio=%d\n",
+		intr_status, host->intr_en, host->pio_size);
+	return IRQ_NONE;
+}
+
+static void mvsd_timeout_timer(unsigned long data)
+{
+	struct mvsd_host *host = (struct mvsd_host *)data;
+	void __iomem *iobase = host->base;
+	struct mmc_request *mrq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	mrq = host->mrq;
+	if (mrq) {
+		dev_err(host->dev, "Timeout waiting for hardware interrupt.\n");
+		dev_err(host->dev, "hw_state=0x%04x, intr_status=0x%04x intr_en=0x%04x\n",
+			mvsd_read(MVSD_HW_STATE),
+			mvsd_read(MVSD_NOR_INTR_STATUS),
+			mvsd_read(MVSD_NOR_INTR_EN));
+
+		host->mrq = NULL;
+
+		mvsd_write(MVSD_SW_RESET, MVSD_SW_RESET_NOW);
+
+		host->xfer_mode &= MVSD_XFER_MODE_INT_CHK_EN;
+		mvsd_write(MVSD_XFER_MODE, host->xfer_mode);
+
+		host->intr_en &= MVSD_NOR_CARD_INT;
+		mvsd_write(MVSD_NOR_INTR_EN, host->intr_en);
+		mvsd_write(MVSD_ERR_INTR_EN, 0);
+		mvsd_write(MVSD_ERR_INTR_STATUS, 0xffff);
+
+		mrq->cmd->error = -ETIMEDOUT;
+		mvsd_finish_cmd(host, mrq->cmd, 0);
+		if (mrq->data) {
+			mrq->data->error = -ETIMEDOUT;
+			mvsd_finish_data(host, mrq->data, 0);
+		}
+	}
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	if (mrq)
+		mmc_request_done(host->mmc, mrq);
+}
+
+static void mvsd_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct mvsd_host *host = mmc_priv(mmc);
+	void __iomem *iobase = host->base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	if (enable) {
+		host->xfer_mode |= MVSD_XFER_MODE_INT_CHK_EN;
+		host->intr_en |= MVSD_NOR_CARD_INT;
+	} else {
+		host->xfer_mode &= ~MVSD_XFER_MODE_INT_CHK_EN;
+		host->intr_en &= ~MVSD_NOR_CARD_INT;
+	}
+	mvsd_write(MVSD_XFER_MODE, host->xfer_mode);
+	mvsd_write(MVSD_NOR_INTR_EN, host->intr_en);
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void mvsd_power_up(struct mvsd_host *host)
+{
+	void __iomem *iobase = host->base;
+	dev_dbg(host->dev, "power up\n");
+	mvsd_write(MVSD_NOR_INTR_EN, 0);
+	mvsd_write(MVSD_ERR_INTR_EN, 0);
+	mvsd_write(MVSD_SW_RESET, MVSD_SW_RESET_NOW);
+	mvsd_write(MVSD_XFER_MODE, 0);
+	mvsd_write(MVSD_NOR_STATUS_EN, 0xffff);
+	mvsd_write(MVSD_ERR_STATUS_EN, 0xffff);
+	mvsd_write(MVSD_NOR_INTR_STATUS, 0xffff);
+	mvsd_write(MVSD_ERR_INTR_STATUS, 0xffff);
+}
+
+static void mvsd_power_down(struct mvsd_host *host)
+{
+	void __iomem *iobase = host->base;
+	dev_dbg(host->dev, "power down\n");
+	mvsd_write(MVSD_NOR_INTR_EN, 0);
+	mvsd_write(MVSD_ERR_INTR_EN, 0);
+	mvsd_write(MVSD_SW_RESET, MVSD_SW_RESET_NOW);
+	mvsd_write(MVSD_XFER_MODE, MVSD_XFER_MODE_STOP_CLK);
+	mvsd_write(MVSD_NOR_STATUS_EN, 0);
+	mvsd_write(MVSD_ERR_STATUS_EN, 0);
+	mvsd_write(MVSD_NOR_INTR_STATUS, 0xffff);
+	mvsd_write(MVSD_ERR_INTR_STATUS, 0xffff);
+}
+
+static void mvsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct mvsd_host *host = mmc_priv(mmc);
+	void __iomem *iobase = host->base;
+	u32 ctrl_reg = 0;
+
+	if (ios->power_mode == MMC_POWER_UP)
+		mvsd_power_up(host);
+
+	if (ios->clock == 0) {
+		mvsd_write(MVSD_XFER_MODE, MVSD_XFER_MODE_STOP_CLK);
+		mvsd_write(MVSD_CLK_DIV, MVSD_BASE_DIV_MAX);
+		host->clock = 0;
+		dev_dbg(host->dev, "clock off\n");
+	} else if (ios->clock != host->clock) {
+		u32 m = DIV_ROUND_UP(host->base_clock, ios->clock) - 1;
+		if (m > MVSD_BASE_DIV_MAX)
+			m = MVSD_BASE_DIV_MAX;
+		mvsd_write(MVSD_CLK_DIV, m);
+		host->clock = ios->clock;
+		host->ns_per_clk = 1000000000 / (host->base_clock / (m+1));
+		dev_dbg(host->dev, "clock=%d (%d), div=0x%04x\n",
+			ios->clock, host->base_clock / (m+1), m);
+	}
+
+	/* default transfer mode */
+	ctrl_reg |= MVSD_HOST_CTRL_BIG_ENDIAN;
+	ctrl_reg &= ~MVSD_HOST_CTRL_LSB_FIRST;
+
+	/* default to maximum timeout */
+	ctrl_reg |= MVSD_HOST_CTRL_TMOUT_MASK;
+	ctrl_reg |= MVSD_HOST_CTRL_TMOUT_EN;
+
+	if (ios->bus_mode == MMC_BUSMODE_PUSHPULL)
+		ctrl_reg |= MVSD_HOST_CTRL_PUSH_PULL_EN;
+
+	if (ios->bus_width == MMC_BUS_WIDTH_4)
+		ctrl_reg |= MVSD_HOST_CTRL_DATA_WIDTH_4_BITS;
+
+	/*
+	 * The HI_SPEED_EN bit is causing trouble with many (but not all)
+	 * high speed SD, SDHC and SDIO cards.  Not enabling that bit
+	 * makes all cards work.  So let's just ignore that bit for now
+	 * and revisit this issue if problems for not enabling this bit
+	 * are ever reported.
+	 */
+#if 0
+	if (ios->timing == MMC_TIMING_MMC_HS ||
+	    ios->timing == MMC_TIMING_SD_HS)
+		ctrl_reg |= MVSD_HOST_CTRL_HI_SPEED_EN;
+#endif
+
+	host->ctrl = ctrl_reg;
+	mvsd_write(MVSD_HOST_CTRL, ctrl_reg);
+	dev_dbg(host->dev, "ctrl 0x%04x: %s %s %s\n", ctrl_reg,
+		(ctrl_reg & MVSD_HOST_CTRL_PUSH_PULL_EN) ?
+			"push-pull" : "open-drain",
+		(ctrl_reg & MVSD_HOST_CTRL_DATA_WIDTH_4_BITS) ?
+			"4bit-width" : "1bit-width",
+		(ctrl_reg & MVSD_HOST_CTRL_HI_SPEED_EN) ?
+			"high-speed" : "");
+
+	if (ios->power_mode == MMC_POWER_OFF)
+		mvsd_power_down(host);
+}
+
+static const struct mmc_host_ops mvsd_ops = {
+	.request		= mvsd_request,
+	.get_ro			= mmc_gpio_get_ro,
+	.set_ios		= mvsd_set_ios,
+	.enable_sdio_irq	= mvsd_enable_sdio_irq,
+};
+
+static void
+mv_conf_mbus_windows(struct mvsd_host *host,
+		     const struct mbus_dram_target_info *dram)
+{
+	void __iomem *iobase = host->base;
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		writel(0, iobase + MVSD_WINDOW_CTRL(i));
+		writel(0, iobase + MVSD_WINDOW_BASE(i));
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+		writel(((cs->size - 1) & 0xffff0000) |
+		       (cs->mbus_attr << 8) |
+		       (dram->mbus_dram_target_id << 4) | 1,
+		       iobase + MVSD_WINDOW_CTRL(i));
+		writel(cs->base, iobase + MVSD_WINDOW_BASE(i));
+	}
+}
+
+static int mvsd_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct mmc_host *mmc = NULL;
+	struct mvsd_host *host = NULL;
+	const struct mbus_dram_target_info *dram;
+	struct resource *r;
+	int ret, irq;
+	struct pinctrl *pinctrl;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (!r || irq < 0)
+		return -ENXIO;
+
+	mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->dev = &pdev->dev;
+
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl))
+		dev_warn(&pdev->dev, "no pins associated\n");
+
+	/*
+	 * Some non-DT platforms do not pass a clock, and the clock
+	 * frequency is passed through platform_data. On DT platforms,
+	 * a clock must always be passed, even if there is no gatable
+	 * clock associated to the SDIO interface (it can simply be a
+	 * fixed rate clock).
+	 */
+	host->clk = devm_clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(host->clk))
+		clk_prepare_enable(host->clk);
+
+	mmc->ops = &mvsd_ops;
+
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	mmc->f_min = DIV_ROUND_UP(host->base_clock, MVSD_BASE_DIV_MAX);
+	mmc->f_max = MVSD_CLOCKRATE_MAX;
+
+	mmc->max_blk_size = 2048;
+	mmc->max_blk_count = 65535;
+
+	mmc->max_segs = 1;
+	mmc->max_seg_size = mmc->max_blk_size * mmc->max_blk_count;
+	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+
+	if (np) {
+		if (IS_ERR(host->clk)) {
+			dev_err(&pdev->dev, "DT platforms must have a clock associated\n");
+			ret = -EINVAL;
+			goto out;
+		}
+
+		host->base_clock = clk_get_rate(host->clk) / 2;
+		ret = mmc_of_parse(mmc);
+		if (ret < 0)
+			goto out;
+	} else {
+		const struct mvsdio_platform_data *mvsd_data;
+
+		mvsd_data = pdev->dev.platform_data;
+		if (!mvsd_data) {
+			ret = -ENXIO;
+			goto out;
+		}
+		mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ |
+			    MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
+		host->base_clock = mvsd_data->clock / 2;
+		/* GPIO 0 regarded as invalid for backward compatibility */
+		if (mvsd_data->gpio_card_detect &&
+		    gpio_is_valid(mvsd_data->gpio_card_detect)) {
+			ret = mmc_gpio_request_cd(mmc,
+						  mvsd_data->gpio_card_detect,
+						  0);
+			if (ret)
+				goto out;
+		} else {
+			mmc->caps |= MMC_CAP_NEEDS_POLL;
+		}
+
+		if (mvsd_data->gpio_write_protect &&
+		    gpio_is_valid(mvsd_data->gpio_write_protect))
+			mmc_gpio_request_ro(mmc, mvsd_data->gpio_write_protect);
+	}
+
+	if (maxfreq)
+		mmc->f_max = maxfreq;
+
+	spin_lock_init(&host->lock);
+
+	host->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(host->base)) {
+		ret = PTR_ERR(host->base);
+		goto out;
+	}
+
+	/* (Re-)program MBUS remapping windows if we are asked to. */
+	dram = mv_mbus_dram_info();
+	if (dram)
+		mv_conf_mbus_windows(host, dram);
+
+	mvsd_power_down(host);
+
+	ret = devm_request_irq(&pdev->dev, irq, mvsd_irq, 0, DRIVER_NAME, host);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot assign irq %d\n", irq);
+		goto out;
+	}
+
+	setup_timer(&host->timer, mvsd_timeout_timer, (unsigned long)host);
+	platform_set_drvdata(pdev, mmc);
+	ret = mmc_add_host(mmc);
+	if (ret)
+		goto out;
+
+	if (!(mmc->caps & MMC_CAP_NEEDS_POLL))
+		dev_dbg(&pdev->dev, "using GPIO for card detection\n");
+	else
+		dev_dbg(&pdev->dev, "lacking card detect (fall back to polling)\n");
+
+	return 0;
+
+out:
+	if (mmc) {
+		mmc_gpio_free_cd(mmc);
+		mmc_gpio_free_ro(mmc);
+		if (!IS_ERR(host->clk))
+			clk_disable_unprepare(host->clk);
+		mmc_free_host(mmc);
+	}
+
+	return ret;
+}
+
+static int mvsd_remove(struct platform_device *pdev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(pdev);
+
+	struct mvsd_host *host = mmc_priv(mmc);
+
+	mmc_gpio_free_cd(mmc);
+	mmc_gpio_free_ro(mmc);
+	mmc_remove_host(mmc);
+	del_timer_sync(&host->timer);
+	mvsd_power_down(host);
+
+	if (!IS_ERR(host->clk))
+		clk_disable_unprepare(host->clk);
+	mmc_free_host(mmc);
+
+	return 0;
+}
+
+static const struct of_device_id mvsdio_dt_ids[] = {
+	{ .compatible = "marvell,orion-sdio" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mvsdio_dt_ids);
+
+static struct platform_driver mvsd_driver = {
+	.probe		= mvsd_probe,
+	.remove		= mvsd_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.of_match_table = mvsdio_dt_ids,
+	},
+};
+
+module_platform_driver(mvsd_driver);
+
+/* maximum card clock frequency (default 50MHz) */
+module_param(maxfreq, int, 0);
+
+/* force PIO transfers all the time */
+module_param(nodma, int, 0);
+
+MODULE_AUTHOR("Maen Suleiman, Nicolas Pitre");
+MODULE_DESCRIPTION("Marvell MMC,SD,SDIO Host Controller driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mvsdio");

drivers/mmc/host/mvsdio.h

@@ -0,0 +1,190 @@
+/*
+ *  Copyright (C) 2008 Marvell Semiconductors, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MVSDIO_H
+#define __MVSDIO_H
+
+/*
+ * Clock rates
+ */
+
+#define MVSD_CLOCKRATE_MAX			50000000
+#define MVSD_BASE_DIV_MAX			0x7ff
+
+
+/*
+ * Register offsets
+ */
+
+#define MVSD_SYS_ADDR_LOW			0x000
+#define MVSD_SYS_ADDR_HI			0x004
+#define MVSD_BLK_SIZE				0x008
+#define MVSD_BLK_COUNT				0x00c
+#define MVSD_ARG_LOW				0x010
+#define MVSD_ARG_HI				0x014
+#define MVSD_XFER_MODE				0x018
+#define MVSD_CMD				0x01c
+#define MVSD_RSP(i)				(0x020 + ((i)<<2))
+#define MVSD_RSP0				0x020
+#define MVSD_RSP1				0x024
+#define MVSD_RSP2				0x028
+#define MVSD_RSP3				0x02c
+#define MVSD_RSP4				0x030
+#define MVSD_RSP5				0x034
+#define MVSD_RSP6				0x038
+#define MVSD_RSP7				0x03c
+#define MVSD_FIFO				0x040
+#define MVSD_RSP_CRC7				0x044
+#define MVSD_HW_STATE				0x048
+#define MVSD_HOST_CTRL				0x050
+#define MVSD_BLK_GAP_CTRL			0x054
+#define MVSD_CLK_CTRL				0x058
+#define MVSD_SW_RESET				0x05c
+#define MVSD_NOR_INTR_STATUS			0x060
+#define MVSD_ERR_INTR_STATUS			0x064
+#define MVSD_NOR_STATUS_EN			0x068
+#define MVSD_ERR_STATUS_EN			0x06c
+#define MVSD_NOR_INTR_EN			0x070
+#define MVSD_ERR_INTR_EN			0x074
+#define MVSD_AUTOCMD12_ERR_STATUS		0x078
+#define MVSD_CURR_BYTE_LEFT			0x07c
+#define MVSD_CURR_BLK_LEFT			0x080
+#define MVSD_AUTOCMD12_ARG_LOW			0x084
+#define MVSD_AUTOCMD12_ARG_HI			0x088
+#define MVSD_AUTOCMD12_CMD			0x08c
+#define MVSD_AUTO_RSP(i)			(0x090 + ((i)<<2))
+#define MVSD_AUTO_RSP0				0x090
+#define MVSD_AUTO_RSP1				0x094
+#define MVSD_AUTO_RSP2				0x098
+#define MVSD_CLK_DIV				0x128
+
+#define MVSD_WINDOW_CTRL(i)			(0x108 + ((i) << 3))
+#define MVSD_WINDOW_BASE(i)			(0x10c + ((i) << 3))
+
+
+/*
+ * MVSD_CMD
+ */
+
+#define MVSD_CMD_RSP_NONE			(0 << 0)
+#define MVSD_CMD_RSP_136			(1 << 0)
+#define MVSD_CMD_RSP_48				(2 << 0)
+#define MVSD_CMD_RSP_48BUSY			(3 << 0)
+
+#define MVSD_CMD_CHECK_DATACRC16		(1 << 2)
+#define MVSD_CMD_CHECK_CMDCRC			(1 << 3)
+#define MVSD_CMD_INDX_CHECK			(1 << 4)
+#define MVSD_CMD_DATA_PRESENT			(1 << 5)
+#define MVSD_UNEXPECTED_RESP			(1 << 7)
+#define MVSD_CMD_INDEX(x)			((x) << 8)
+
+
+/*
+ * MVSD_AUTOCMD12_CMD
+ */
+
+#define MVSD_AUTOCMD12_BUSY			(1 << 0)
+#define MVSD_AUTOCMD12_INDX_CHECK		(1 << 1)
+#define MVSD_AUTOCMD12_INDEX(x)			((x) << 8)
+
+/*
+ * MVSD_XFER_MODE
+ */
+
+#define MVSD_XFER_MODE_WR_DATA_START		(1 << 0)
+#define MVSD_XFER_MODE_HW_WR_DATA_EN		(1 << 1)
+#define MVSD_XFER_MODE_AUTO_CMD12		(1 << 2)
+#define MVSD_XFER_MODE_INT_CHK_EN		(1 << 3)
+#define MVSD_XFER_MODE_TO_HOST			(1 << 4)
+#define MVSD_XFER_MODE_STOP_CLK			(1 << 5)
+#define MVSD_XFER_MODE_PIO			(1 << 6)
+
+
+/*
+ * MVSD_HOST_CTRL
+ */
+
+#define MVSD_HOST_CTRL_PUSH_PULL_EN 		(1 << 0)
+
+#define MVSD_HOST_CTRL_CARD_TYPE_MEM_ONLY 	(0 << 1)
+#define MVSD_HOST_CTRL_CARD_TYPE_IO_ONLY 	(1 << 1)
+#define MVSD_HOST_CTRL_CARD_TYPE_IO_MEM_COMBO 	(2 << 1)
+#define MVSD_HOST_CTRL_CARD_TYPE_IO_MMC 	(3 << 1)
+#define MVSD_HOST_CTRL_CARD_TYPE_MASK	 	(3 << 1)
+
+#define MVSD_HOST_CTRL_BIG_ENDIAN 		(1 << 3)
+#define MVSD_HOST_CTRL_LSB_FIRST 		(1 << 4)
+#define MVSD_HOST_CTRL_DATA_WIDTH_4_BITS 	(1 << 9)
+#define MVSD_HOST_CTRL_HI_SPEED_EN 		(1 << 10)
+
+#define MVSD_HOST_CTRL_TMOUT_MAX 		0xf
+#define MVSD_HOST_CTRL_TMOUT_MASK 		(0xf << 11)
+#define MVSD_HOST_CTRL_TMOUT(x) 		((x) << 11)
+#define MVSD_HOST_CTRL_TMOUT_EN 		(1 << 15)
+
+
+/*
+ * MVSD_SW_RESET
+ */
+
+#define MVSD_SW_RESET_NOW			(1 << 8)
+
+
+/*
+ * Normal interrupt status bits
+ */
+
+#define MVSD_NOR_CMD_DONE			(1 << 0)
+#define MVSD_NOR_XFER_DONE			(1 << 1)
+#define MVSD_NOR_BLK_GAP_EVT			(1 << 2)
+#define MVSD_NOR_DMA_DONE			(1 << 3)
+#define MVSD_NOR_TX_AVAIL			(1 << 4)
+#define MVSD_NOR_RX_READY			(1 << 5)
+#define MVSD_NOR_CARD_INT			(1 << 8)
+#define MVSD_NOR_READ_WAIT_ON			(1 << 9)
+#define MVSD_NOR_RX_FIFO_8W			(1 << 10)
+#define MVSD_NOR_TX_FIFO_8W			(1 << 11)
+#define MVSD_NOR_SUSPEND_ON			(1 << 12)
+#define MVSD_NOR_AUTOCMD12_DONE			(1 << 13)
+#define MVSD_NOR_UNEXP_RSP			(1 << 14)
+#define MVSD_NOR_ERROR				(1 << 15)
+
+
+/*
+ * Error status bits
+ */
+
+#define MVSD_ERR_CMD_TIMEOUT			(1 << 0)
+#define MVSD_ERR_CMD_CRC			(1 << 1)
+#define MVSD_ERR_CMD_ENDBIT			(1 << 2)
+#define MVSD_ERR_CMD_INDEX			(1 << 3)
+#define MVSD_ERR_DATA_TIMEOUT			(1 << 4)
+#define MVSD_ERR_DATA_CRC			(1 << 5)
+#define MVSD_ERR_DATA_ENDBIT			(1 << 6)
+#define MVSD_ERR_AUTOCMD12			(1 << 8)
+#define MVSD_ERR_CMD_STARTBIT			(1 << 9)
+#define MVSD_ERR_XFER_SIZE			(1 << 10)
+#define MVSD_ERR_RESP_T_BIT			(1 << 11)
+#define MVSD_ERR_CRC_ENDBIT			(1 << 12)
+#define MVSD_ERR_CRC_STARTBIT			(1 << 13)
+#define MVSD_ERR_CRC_STATUS			(1 << 14)
+
+
+/*
+ * CMD12 error status bits
+ */
+
+#define MVSD_AUTOCMD12_ERR_NOTEXE		(1 << 0)
+#define MVSD_AUTOCMD12_ERR_TIMEOUT		(1 << 1)
+#define MVSD_AUTOCMD12_ERR_CRC			(1 << 2)
+#define MVSD_AUTOCMD12_ERR_ENDBIT		(1 << 3)
+#define MVSD_AUTOCMD12_ERR_INDEX		(1 << 4)
+#define MVSD_AUTOCMD12_ERR_RESP_T_BIT		(1 << 5)
+#define MVSD_AUTOCMD12_ERR_RESP_STARTBIT	(1 << 6)
+
+#endif

drivers/mmc/host/mxs-mmc.c

@@ -0,0 +1,750 @@
+/*
+ * Portions copyright (C) 2003 Russell King, PXA MMCI Driver
+ * Portions copyright (C) 2004-2005 Pierre Ossman, W83L51xD SD/MMC driver
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/highmem.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/completion.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/stmp_device.h>
+#include <linux/spi/mxs-spi.h>
+
+#define DRIVER_NAME	"mxs-mmc"
+
+#define MXS_MMC_IRQ_BITS	(BM_SSP_CTRL1_SDIO_IRQ		| \
+				 BM_SSP_CTRL1_RESP_ERR_IRQ	| \
+				 BM_SSP_CTRL1_RESP_TIMEOUT_IRQ	| \
+				 BM_SSP_CTRL1_DATA_TIMEOUT_IRQ	| \
+				 BM_SSP_CTRL1_DATA_CRC_IRQ	| \
+				 BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ	| \
+				 BM_SSP_CTRL1_RECV_TIMEOUT_IRQ  | \
+				 BM_SSP_CTRL1_FIFO_OVERRUN_IRQ)
+
+/* card detect polling timeout */
+#define MXS_MMC_DETECT_TIMEOUT			(HZ/2)
+
+struct mxs_mmc_host {
+	struct mxs_ssp			ssp;
+
+	struct mmc_host			*mmc;
+	struct mmc_request		*mrq;
+	struct mmc_command		*cmd;
+	struct mmc_data			*data;
+
+	unsigned char			bus_width;
+	spinlock_t			lock;
+	int				sdio_irq_en;
+	bool				broken_cd;
+};
+
+static int mxs_mmc_get_cd(struct mmc_host *mmc)
+{
+	struct mxs_mmc_host *host = mmc_priv(mmc);
+	struct mxs_ssp *ssp = &host->ssp;
+	int present, ret;
+
+	if (host->broken_cd)
+		return -ENOSYS;
+
+	ret = mmc_gpio_get_cd(mmc);
+	if (ret >= 0)
+		return ret;
+
+	present = mmc->caps & MMC_CAP_NEEDS_POLL ||
+		!(readl(ssp->base + HW_SSP_STATUS(ssp)) &
+			BM_SSP_STATUS_CARD_DETECT);
+
+	if (mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH)
+		present = !present;
+
+	return present;
+}
+
+static int mxs_mmc_reset(struct mxs_mmc_host *host)
+{
+	struct mxs_ssp *ssp = &host->ssp;
+	u32 ctrl0, ctrl1;
+	int ret;
+
+	ret = stmp_reset_block(ssp->base);
+	if (ret)
+		return ret;
+
+	ctrl0 = BM_SSP_CTRL0_IGNORE_CRC;
+	ctrl1 = BF_SSP(0x3, CTRL1_SSP_MODE) |
+		BF_SSP(0x7, CTRL1_WORD_LENGTH) |
+		BM_SSP_CTRL1_DMA_ENABLE |
+		BM_SSP_CTRL1_POLARITY |
+		BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN |
+		BM_SSP_CTRL1_DATA_CRC_IRQ_EN |
+		BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN |
+		BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN |
+		BM_SSP_CTRL1_RESP_ERR_IRQ_EN;
+
+	writel(BF_SSP(0xffff, TIMING_TIMEOUT) |
+	       BF_SSP(2, TIMING_CLOCK_DIVIDE) |
+	       BF_SSP(0, TIMING_CLOCK_RATE),
+	       ssp->base + HW_SSP_TIMING(ssp));
+
+	if (host->sdio_irq_en) {
+		ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
+		ctrl1 |= BM_SSP_CTRL1_SDIO_IRQ_EN;
+	}
+
+	writel(ctrl0, ssp->base + HW_SSP_CTRL0);
+	writel(ctrl1, ssp->base + HW_SSP_CTRL1(ssp));
+	return 0;
+}
+
+static void mxs_mmc_start_cmd(struct mxs_mmc_host *host,
+			      struct mmc_command *cmd);
+
+static void mxs_mmc_request_done(struct mxs_mmc_host *host)
+{
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = host->data;
+	struct mmc_request *mrq = host->mrq;
+	struct mxs_ssp *ssp = &host->ssp;
+
+	if (mmc_resp_type(cmd) & MMC_RSP_PRESENT) {
+		if (mmc_resp_type(cmd) & MMC_RSP_136) {
+			cmd->resp[3] = readl(ssp->base + HW_SSP_SDRESP0(ssp));
+			cmd->resp[2] = readl(ssp->base + HW_SSP_SDRESP1(ssp));
+			cmd->resp[1] = readl(ssp->base + HW_SSP_SDRESP2(ssp));
+			cmd->resp[0] = readl(ssp->base + HW_SSP_SDRESP3(ssp));
+		} else {
+			cmd->resp[0] = readl(ssp->base + HW_SSP_SDRESP0(ssp));
+		}
+	}
+
+	if (data) {
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+			     data->sg_len, ssp->dma_dir);
+		/*
+		 * If there was an error on any block, we mark all
+		 * data blocks as being in error.
+		 */
+		if (!data->error)
+			data->bytes_xfered = data->blocks * data->blksz;
+		else
+			data->bytes_xfered = 0;
+
+		host->data = NULL;
+		if (mrq->stop) {
+			mxs_mmc_start_cmd(host, mrq->stop);
+			return;
+		}
+	}
+
+	host->mrq = NULL;
+	mmc_request_done(host->mmc, mrq);
+}
+
+static void mxs_mmc_dma_irq_callback(void *param)
+{
+	struct mxs_mmc_host *host = param;
+
+	mxs_mmc_request_done(host);
+}
+
+static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id)
+{
+	struct mxs_mmc_host *host = dev_id;
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = host->data;
+	struct mxs_ssp *ssp = &host->ssp;
+	u32 stat;
+
+	spin_lock(&host->lock);
+
+	stat = readl(ssp->base + HW_SSP_CTRL1(ssp));
+	writel(stat & MXS_MMC_IRQ_BITS,
+	       ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_CLR);
+
+	spin_unlock(&host->lock);
+
+	if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
+		mmc_signal_sdio_irq(host->mmc);
+
+	if (stat & BM_SSP_CTRL1_RESP_TIMEOUT_IRQ)
+		cmd->error = -ETIMEDOUT;
+	else if (stat & BM_SSP_CTRL1_RESP_ERR_IRQ)
+		cmd->error = -EIO;
+
+	if (data) {
+		if (stat & (BM_SSP_CTRL1_DATA_TIMEOUT_IRQ |
+			    BM_SSP_CTRL1_RECV_TIMEOUT_IRQ))
+			data->error = -ETIMEDOUT;
+		else if (stat & BM_SSP_CTRL1_DATA_CRC_IRQ)
+			data->error = -EILSEQ;
+		else if (stat & (BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ |
+				 BM_SSP_CTRL1_FIFO_OVERRUN_IRQ))
+			data->error = -EIO;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct dma_async_tx_descriptor *mxs_mmc_prep_dma(
+	struct mxs_mmc_host *host, unsigned long flags)
+{
+	struct mxs_ssp *ssp = &host->ssp;
+	struct dma_async_tx_descriptor *desc;
+	struct mmc_data *data = host->data;
+	struct scatterlist * sgl;
+	unsigned int sg_len;
+
+	if (data) {
+		/* data */
+		dma_map_sg(mmc_dev(host->mmc), data->sg,
+			   data->sg_len, ssp->dma_dir);
+		sgl = data->sg;
+		sg_len = data->sg_len;
+	} else {
+		/* pio */
+		sgl = (struct scatterlist *) ssp->ssp_pio_words;
+		sg_len = SSP_PIO_NUM;
+	}
+
+	desc = dmaengine_prep_slave_sg(ssp->dmach,
+				sgl, sg_len, ssp->slave_dirn, flags);
+	if (desc) {
+		desc->callback = mxs_mmc_dma_irq_callback;
+		desc->callback_param = host;
+	} else {
+		if (data)
+			dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+				     data->sg_len, ssp->dma_dir);
+	}
+
+	return desc;
+}
+
+static void mxs_mmc_bc(struct mxs_mmc_host *host)
+{
+	struct mxs_ssp *ssp = &host->ssp;
+	struct mmc_command *cmd = host->cmd;
+	struct dma_async_tx_descriptor *desc;
+	u32 ctrl0, cmd0, cmd1;
+
+	ctrl0 = BM_SSP_CTRL0_ENABLE | BM_SSP_CTRL0_IGNORE_CRC;
+	cmd0 = BF_SSP(cmd->opcode, CMD0_CMD) | BM_SSP_CMD0_APPEND_8CYC;
+	cmd1 = cmd->arg;
+
+	if (host->sdio_irq_en) {
+		ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
+		cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN;
+	}
+
+	ssp->ssp_pio_words[0] = ctrl0;
+	ssp->ssp_pio_words[1] = cmd0;
+	ssp->ssp_pio_words[2] = cmd1;
+	ssp->dma_dir = DMA_NONE;
+	ssp->slave_dirn = DMA_TRANS_NONE;
+	desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
+	if (!desc)
+		goto out;
+
+	dmaengine_submit(desc);
+	dma_async_issue_pending(ssp->dmach);
+	return;
+
+out:
+	dev_warn(mmc_dev(host->mmc),
+		 "%s: failed to prep dma\n", __func__);
+}
+
+static void mxs_mmc_ac(struct mxs_mmc_host *host)
+{
+	struct mxs_ssp *ssp = &host->ssp;
+	struct mmc_command *cmd = host->cmd;
+	struct dma_async_tx_descriptor *desc;
+	u32 ignore_crc, get_resp, long_resp;
+	u32 ctrl0, cmd0, cmd1;
+
+	ignore_crc = (mmc_resp_type(cmd) & MMC_RSP_CRC) ?
+			0 : BM_SSP_CTRL0_IGNORE_CRC;
+	get_resp = (mmc_resp_type(cmd) & MMC_RSP_PRESENT) ?
+			BM_SSP_CTRL0_GET_RESP : 0;
+	long_resp = (mmc_resp_type(cmd) & MMC_RSP_136) ?
+			BM_SSP_CTRL0_LONG_RESP : 0;
+
+	ctrl0 = BM_SSP_CTRL0_ENABLE | ignore_crc | get_resp | long_resp;
+	cmd0 = BF_SSP(cmd->opcode, CMD0_CMD);
+	cmd1 = cmd->arg;
+
+	if (host->sdio_irq_en) {
+		ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
+		cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN;
+	}
+
+	ssp->ssp_pio_words[0] = ctrl0;
+	ssp->ssp_pio_words[1] = cmd0;
+	ssp->ssp_pio_words[2] = cmd1;
+	ssp->dma_dir = DMA_NONE;
+	ssp->slave_dirn = DMA_TRANS_NONE;
+	desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
+	if (!desc)
+		goto out;
+
+	dmaengine_submit(desc);
+	dma_async_issue_pending(ssp->dmach);
+	return;
+
+out:
+	dev_warn(mmc_dev(host->mmc),
+		 "%s: failed to prep dma\n", __func__);
+}
+
+static unsigned short mxs_ns_to_ssp_ticks(unsigned clock_rate, unsigned ns)
+{
+	const unsigned int ssp_timeout_mul = 4096;
+	/*
+	 * Calculate ticks in ms since ns are large numbers
+	 * and might overflow
+	 */
+	const unsigned int clock_per_ms = clock_rate / 1000;
+	const unsigned int ms = ns / 1000;
+	const unsigned int ticks = ms * clock_per_ms;
+	const unsigned int ssp_ticks = ticks / ssp_timeout_mul;
+
+	WARN_ON(ssp_ticks == 0);
+	return ssp_ticks;
+}
+
+static void mxs_mmc_adtc(struct mxs_mmc_host *host)
+{
+	struct mmc_command *cmd = host->cmd;
+	struct mmc_data *data = cmd->data;
+	struct dma_async_tx_descriptor *desc;
+	struct scatterlist *sgl = data->sg, *sg;
+	unsigned int sg_len = data->sg_len;
+	unsigned int i;
+
+	unsigned short dma_data_dir, timeout;
+	enum dma_transfer_direction slave_dirn;
+	unsigned int data_size = 0, log2_blksz;
+	unsigned int blocks = data->blocks;
+
+	struct mxs_ssp *ssp = &host->ssp;
+
+	u32 ignore_crc, get_resp, long_resp, read;
+	u32 ctrl0, cmd0, cmd1, val;
+
+	ignore_crc = (mmc_resp_type(cmd) & MMC_RSP_CRC) ?
+			0 : BM_SSP_CTRL0_IGNORE_CRC;
+	get_resp = (mmc_resp_type(cmd) & MMC_RSP_PRESENT) ?
+			BM_SSP_CTRL0_GET_RESP : 0;
+	long_resp = (mmc_resp_type(cmd) & MMC_RSP_136) ?
+			BM_SSP_CTRL0_LONG_RESP : 0;
+
+	if (data->flags & MMC_DATA_WRITE) {
+		dma_data_dir = DMA_TO_DEVICE;
+		slave_dirn = DMA_MEM_TO_DEV;
+		read = 0;
+	} else {
+		dma_data_dir = DMA_FROM_DEVICE;
+		slave_dirn = DMA_DEV_TO_MEM;
+		read = BM_SSP_CTRL0_READ;
+	}
+
+	ctrl0 = BF_SSP(host->bus_width, CTRL0_BUS_WIDTH) |
+		ignore_crc | get_resp | long_resp |
+		BM_SSP_CTRL0_DATA_XFER | read |
+		BM_SSP_CTRL0_WAIT_FOR_IRQ |
+		BM_SSP_CTRL0_ENABLE;
+
+	cmd0 = BF_SSP(cmd->opcode, CMD0_CMD);
+
+	/* get logarithm to base 2 of block size for setting register */
+	log2_blksz = ilog2(data->blksz);
+
+	/*
+	 * take special care of the case that data size from data->sg
+	 * is not equal to blocks x blksz
+	 */
+	for_each_sg(sgl, sg, sg_len, i)
+		data_size += sg->length;
+
+	if (data_size != data->blocks * data->blksz)
+		blocks = 1;
+
+	/* xfer count, block size and count need to be set differently */
+	if (ssp_is_old(ssp)) {
+		ctrl0 |= BF_SSP(data_size, CTRL0_XFER_COUNT);
+		cmd0 |= BF_SSP(log2_blksz, CMD0_BLOCK_SIZE) |
+			BF_SSP(blocks - 1, CMD0_BLOCK_COUNT);
+	} else {
+		writel(data_size, ssp->base + HW_SSP_XFER_SIZE);
+		writel(BF_SSP(log2_blksz, BLOCK_SIZE_BLOCK_SIZE) |
+		       BF_SSP(blocks - 1, BLOCK_SIZE_BLOCK_COUNT),
+		       ssp->base + HW_SSP_BLOCK_SIZE);
+	}
+
+	if ((cmd->opcode == MMC_STOP_TRANSMISSION) ||
+	    (cmd->opcode == SD_IO_RW_EXTENDED))
+		cmd0 |= BM_SSP_CMD0_APPEND_8CYC;
+
+	cmd1 = cmd->arg;
+
+	if (host->sdio_irq_en) {
+		ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
+		cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN;
+	}
+
+	/* set the timeout count */
+	timeout = mxs_ns_to_ssp_ticks(ssp->clk_rate, data->timeout_ns);
+	val = readl(ssp->base + HW_SSP_TIMING(ssp));
+	val &= ~(BM_SSP_TIMING_TIMEOUT);
+	val |= BF_SSP(timeout, TIMING_TIMEOUT);
+	writel(val, ssp->base + HW_SSP_TIMING(ssp));
+
+	/* pio */
+	ssp->ssp_pio_words[0] = ctrl0;
+	ssp->ssp_pio_words[1] = cmd0;
+	ssp->ssp_pio_words[2] = cmd1;
+	ssp->dma_dir = DMA_NONE;
+	ssp->slave_dirn = DMA_TRANS_NONE;
+	desc = mxs_mmc_prep_dma(host, 0);
+	if (!desc)
+		goto out;
+
+	/* append data sg */
+	WARN_ON(host->data != NULL);
+	host->data = data;
+	ssp->dma_dir = dma_data_dir;
+	ssp->slave_dirn = slave_dirn;
+	desc = mxs_mmc_prep_dma(host, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc)
+		goto out;
+
+	dmaengine_submit(desc);
+	dma_async_issue_pending(ssp->dmach);
+	return;
+out:
+	dev_warn(mmc_dev(host->mmc),
+		 "%s: failed to prep dma\n", __func__);
+}
+
+static void mxs_mmc_start_cmd(struct mxs_mmc_host *host,
+			      struct mmc_command *cmd)
+{
+	host->cmd = cmd;
+
+	switch (mmc_cmd_type(cmd)) {
+	case MMC_CMD_BC:
+		mxs_mmc_bc(host);
+		break;
+	case MMC_CMD_BCR:
+		mxs_mmc_ac(host);
+		break;
+	case MMC_CMD_AC:
+		mxs_mmc_ac(host);
+		break;
+	case MMC_CMD_ADTC:
+		mxs_mmc_adtc(host);
+		break;
+	default:
+		dev_warn(mmc_dev(host->mmc),
+			 "%s: unknown MMC command\n", __func__);
+		break;
+	}
+}
+
+static void mxs_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct mxs_mmc_host *host = mmc_priv(mmc);
+
+	WARN_ON(host->mrq != NULL);
+	host->mrq = mrq;
+	mxs_mmc_start_cmd(host, mrq->cmd);
+}
+
+static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct mxs_mmc_host *host = mmc_priv(mmc);
+
+	if (ios->bus_width == MMC_BUS_WIDTH_8)
+		host->bus_width = 2;
+	else if (ios->bus_width == MMC_BUS_WIDTH_4)
+		host->bus_width = 1;
+	else
+		host->bus_width = 0;
+
+	if (ios->clock)
+		mxs_ssp_set_clk_rate(&host->ssp, ios->clock);
+}
+
+static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct mxs_mmc_host *host = mmc_priv(mmc);
+	struct mxs_ssp *ssp = &host->ssp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	host->sdio_irq_en = enable;
+
+	if (enable) {
+		writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
+		       ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+		writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
+		       ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_SET);
+	} else {
+		writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
+		       ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+		writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
+		       ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_CLR);
+	}
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	if (enable && readl(ssp->base + HW_SSP_STATUS(ssp)) &
+			BM_SSP_STATUS_SDIO_IRQ)
+		mmc_signal_sdio_irq(host->mmc);
+
+}
+
+static const struct mmc_host_ops mxs_mmc_ops = {
+	.request = mxs_mmc_request,
+	.get_ro = mmc_gpio_get_ro,
+	.get_cd = mxs_mmc_get_cd,
+	.set_ios = mxs_mmc_set_ios,
+	.enable_sdio_irq = mxs_mmc_enable_sdio_irq,
+};
+
+static struct platform_device_id mxs_ssp_ids[] = {
+	{
+		.name = "imx23-mmc",
+		.driver_data = IMX23_SSP,
+	}, {
+		.name = "imx28-mmc",
+		.driver_data = IMX28_SSP,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, mxs_ssp_ids);
+
+static const struct of_device_id mxs_mmc_dt_ids[] = {
+	{ .compatible = "fsl,imx23-mmc", .data = (void *) IMX23_SSP, },
+	{ .compatible = "fsl,imx28-mmc", .data = (void *) IMX28_SSP, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_mmc_dt_ids);
+
+static int mxs_mmc_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id =
+			of_match_device(mxs_mmc_dt_ids, &pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
+	struct mxs_mmc_host *host;
+	struct mmc_host *mmc;
+	struct resource *iores;
+	int ret = 0, irq_err;
+	struct regulator *reg_vmmc;
+	struct mxs_ssp *ssp;
+
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq_err = platform_get_irq(pdev, 0);
+	if (!iores || irq_err < 0)
+		return -EINVAL;
+
+	mmc = mmc_alloc_host(sizeof(struct mxs_mmc_host), &pdev->dev);
+	if (!mmc)
+		return -ENOMEM;
+
+	host = mmc_priv(mmc);
+	ssp = &host->ssp;
+	ssp->dev = &pdev->dev;
+	ssp->base = devm_ioremap_resource(&pdev->dev, iores);
+	if (IS_ERR(ssp->base)) {
+		ret = PTR_ERR(ssp->base);
+		goto out_mmc_free;
+	}
+
+	ssp->devid = (enum mxs_ssp_id) of_id->data;
+
+	host->mmc = mmc;
+	host->sdio_irq_en = 0;
+
+	reg_vmmc = devm_regulator_get(&pdev->dev, "vmmc");
+	if (!IS_ERR(reg_vmmc)) {
+		ret = regulator_enable(reg_vmmc);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Failed to enable vmmc regulator: %d\n", ret);
+			goto out_mmc_free;
+		}
+	}
+
+	ssp->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ssp->clk)) {
+		ret = PTR_ERR(ssp->clk);
+		goto out_mmc_free;
+	}
+	clk_prepare_enable(ssp->clk);
+
+	ret = mxs_mmc_reset(host);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to reset mmc: %d\n", ret);
+		goto out_clk_disable;
+	}
+
+	ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx");
+	if (!ssp->dmach) {
+		dev_err(mmc_dev(host->mmc),
+			"%s: failed to request dma\n", __func__);
+		ret = -ENODEV;
+		goto out_clk_disable;
+	}
+
+	/* set mmc core parameters */
+	mmc->ops = &mxs_mmc_ops;
+	mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
+		    MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL;
+
+	host->broken_cd = of_property_read_bool(np, "broken-cd");
+
+	mmc->f_min = 400000;
+	mmc->f_max = 288000000;
+
+	ret = mmc_of_parse(mmc);
+	if (ret)
+		goto out_clk_disable;
+
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	mmc->max_segs = 52;
+	mmc->max_blk_size = 1 << 0xf;
+	mmc->max_blk_count = (ssp_is_old(ssp)) ? 0xff : 0xffffff;
+	mmc->max_req_size = (ssp_is_old(ssp)) ? 0xffff : 0xffffffff;
+	mmc->max_seg_size = dma_get_max_seg_size(ssp->dmach->device->dev);
+
+	platform_set_drvdata(pdev, mmc);
+
+	ret = devm_request_irq(&pdev->dev, irq_err, mxs_mmc_irq_handler, 0,
+			       DRIVER_NAME, host);
+	if (ret)
+		goto out_free_dma;
+
+	spin_lock_init(&host->lock);
+
+	ret = mmc_add_host(mmc);
+	if (ret)
+		goto out_free_dma;
+
+	dev_info(mmc_dev(host->mmc), "initialized\n");
+
+	return 0;
+
+out_free_dma:
+	if (ssp->dmach)
+		dma_release_channel(ssp->dmach);
+out_clk_disable:
+	clk_disable_unprepare(ssp->clk);
+out_mmc_free:
+	mmc_free_host(mmc);
+	return ret;
+}
+
+static int mxs_mmc_remove(struct platform_device *pdev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(pdev);
+	struct mxs_mmc_host *host = mmc_priv(mmc);
+	struct mxs_ssp *ssp = &host->ssp;
+
+	mmc_remove_host(mmc);
+
+	if (ssp->dmach)
+		dma_release_channel(ssp->dmach);
+
+	clk_disable_unprepare(ssp->clk);
+
+	mmc_free_host(mmc);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mxs_mmc_suspend(struct device *dev)
+{
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct mxs_mmc_host *host = mmc_priv(mmc);
+	struct mxs_ssp *ssp = &host->ssp;
+
+	clk_disable_unprepare(ssp->clk);
+	return 0;
+}
+
+static int mxs_mmc_resume(struct device *dev)
+{
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct mxs_mmc_host *host = mmc_priv(mmc);
+	struct mxs_ssp *ssp = &host->ssp;
+
+	clk_prepare_enable(ssp->clk);
+	return 0;
+}
+
+static const struct dev_pm_ops mxs_mmc_pm_ops = {
+	.suspend	= mxs_mmc_suspend,
+	.resume		= mxs_mmc_resume,
+};
+#endif
+
+static struct platform_driver mxs_mmc_driver = {
+	.probe		= mxs_mmc_probe,
+	.remove		= mxs_mmc_remove,
+	.id_table	= mxs_ssp_ids,
+	.driver		= {
+		.name	= DRIVER_NAME,
+#ifdef CONFIG_PM
+		.pm	= &mxs_mmc_pm_ops,
+#endif
+		.of_match_table = mxs_mmc_dt_ids,
+	},
+};
+
+module_platform_driver(mxs_mmc_driver);
+
+MODULE_DESCRIPTION("FREESCALE MXS MMC peripheral");
+MODULE_AUTHOR("Freescale Semiconductor");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);

drivers/mmc/host/of_mmc_spi.c

@@ -0,0 +1,159 @@
+/*
+ * OpenFirmware bindings for the MMC-over-SPI driver
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/host.h>
+
+/* For archs that don't support NO_IRQ (such as mips), provide a dummy value */
+#ifndef NO_IRQ
+#define NO_IRQ 0
+#endif
+
+MODULE_LICENSE("GPL");
+
+enum {
+	CD_GPIO = 0,
+	WP_GPIO,
+	NUM_GPIOS,
+};
+
+struct of_mmc_spi {
+	int gpios[NUM_GPIOS];
+	bool alow_gpios[NUM_GPIOS];
+	int detect_irq;
+	struct mmc_spi_platform_data pdata;
+};
+
+static struct of_mmc_spi *to_of_mmc_spi(struct device *dev)
+{
+	return container_of(dev->platform_data, struct of_mmc_spi, pdata);
+}
+
+static int of_mmc_spi_init(struct device *dev,
+			   irqreturn_t (*irqhandler)(int, void *), void *mmc)
+{
+	struct of_mmc_spi *oms = to_of_mmc_spi(dev);
+
+	return request_threaded_irq(oms->detect_irq, NULL, irqhandler, 0,
+				    dev_name(dev), mmc);
+}
+
+static void of_mmc_spi_exit(struct device *dev, void *mmc)
+{
+	struct of_mmc_spi *oms = to_of_mmc_spi(dev);
+
+	free_irq(oms->detect_irq, mmc);
+}
+
+struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct device_node *np = dev->of_node;
+	struct of_mmc_spi *oms;
+	const u32 *voltage_ranges;
+	int num_ranges;
+	int i;
+	int ret = -EINVAL;
+
+	if (dev->platform_data || !np)
+		return dev->platform_data;
+
+	oms = kzalloc(sizeof(*oms), GFP_KERNEL);
+	if (!oms)
+		return NULL;
+
+	voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges);
+	num_ranges = num_ranges / sizeof(*voltage_ranges) / 2;
+	if (!voltage_ranges || !num_ranges) {
+		dev_err(dev, "OF: voltage-ranges unspecified\n");
+		goto err_ocr;
+	}
+
+	for (i = 0; i < num_ranges; i++) {
+		const int j = i * 2;
+		u32 mask;
+
+		mask = mmc_vddrange_to_ocrmask(be32_to_cpu(voltage_ranges[j]),
+					       be32_to_cpu(voltage_ranges[j + 1]));
+		if (!mask) {
+			ret = -EINVAL;
+			dev_err(dev, "OF: voltage-range #%d is invalid\n", i);
+			goto err_ocr;
+		}
+		oms->pdata.ocr_mask |= mask;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(oms->gpios); i++) {
+		enum of_gpio_flags gpio_flags;
+
+		oms->gpios[i] = of_get_gpio_flags(np, i, &gpio_flags);
+		if (!gpio_is_valid(oms->gpios[i]))
+			continue;
+
+		if (gpio_flags & OF_GPIO_ACTIVE_LOW)
+			oms->alow_gpios[i] = true;
+	}
+
+	if (gpio_is_valid(oms->gpios[CD_GPIO])) {
+		oms->pdata.cd_gpio = oms->gpios[CD_GPIO];
+		oms->pdata.flags |= MMC_SPI_USE_CD_GPIO;
+		if (!oms->alow_gpios[CD_GPIO])
+			oms->pdata.caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
+	}
+	if (gpio_is_valid(oms->gpios[WP_GPIO])) {
+		oms->pdata.ro_gpio = oms->gpios[WP_GPIO];
+		oms->pdata.flags |= MMC_SPI_USE_RO_GPIO;
+		if (!oms->alow_gpios[WP_GPIO])
+			oms->pdata.caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+	}
+
+	oms->detect_irq = irq_of_parse_and_map(np, 0);
+	if (oms->detect_irq != 0) {
+		oms->pdata.init = of_mmc_spi_init;
+		oms->pdata.exit = of_mmc_spi_exit;
+	} else {
+		oms->pdata.caps |= MMC_CAP_NEEDS_POLL;
+	}
+
+	dev->platform_data = &oms->pdata;
+	return dev->platform_data;
+err_ocr:
+	kfree(oms);
+	return NULL;
+}
+EXPORT_SYMBOL(mmc_spi_get_pdata);
+
+void mmc_spi_put_pdata(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct device_node *np = dev->of_node;
+	struct of_mmc_spi *oms = to_of_mmc_spi(dev);
+
+	if (!dev->platform_data || !np)
+		return;
+
+	kfree(oms);
+	dev->platform_data = NULL;
+}
+EXPORT_SYMBOL(mmc_spi_put_pdata);

drivers/mmc/host/pxamci.c

@@ -0,0 +1,896 @@
+/*
+ *  linux/drivers/mmc/host/pxa.c - PXA MMCI driver
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This hardware is really sick:
+ *   - No way to clear interrupts.
+ *   - Have to turn off the clock whenever we touch the device.
+ *   - Doesn't tell you how many data blocks were transferred.
+ *  Yuck!
+ *
+ *	1 and 3 byte data transfers not supported
+ *	max block length up to 1023
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/mmc/host.h>
+#include <linux/io.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio.h>
+#include <linux/gfp.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
+
+#include <asm/sizes.h>
+
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <linux/platform_data/mmc-pxamci.h>
+
+#include "pxamci.h"
+
+#define DRIVER_NAME	"pxa2xx-mci"
+
+#define NR_SG	1
+#define CLKRT_OFF	(~0)
+
+#define mmc_has_26MHz()		(cpu_is_pxa300() || cpu_is_pxa310() \
+				|| cpu_is_pxa935())
+
+struct pxamci_host {
+	struct mmc_host		*mmc;
+	spinlock_t		lock;
+	struct resource		*res;
+	void __iomem		*base;
+	struct clk		*clk;
+	unsigned long		clkrate;
+	int			irq;
+	int			dma;
+	unsigned int		clkrt;
+	unsigned int		cmdat;
+	unsigned int		imask;
+	unsigned int		power_mode;
+	struct pxamci_platform_data *pdata;
+
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+
+	dma_addr_t		sg_dma;
+	struct pxa_dma_desc	*sg_cpu;
+	unsigned int		dma_len;
+
+	unsigned int		dma_dir;
+	unsigned int		dma_drcmrrx;
+	unsigned int		dma_drcmrtx;
+
+	struct regulator	*vcc;
+};
+
+static inline void pxamci_init_ocr(struct pxamci_host *host)
+{
+#ifdef CONFIG_REGULATOR
+	host->vcc = regulator_get_optional(mmc_dev(host->mmc), "vmmc");
+
+	if (IS_ERR(host->vcc))
+		host->vcc = NULL;
+	else {
+		host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
+		if (host->pdata && host->pdata->ocr_mask)
+			dev_warn(mmc_dev(host->mmc),
+				"ocr_mask/setpower will not be used\n");
+	}
+#endif
+	if (host->vcc == NULL) {
+		/* fall-back to platform data */
+		host->mmc->ocr_avail = host->pdata ?
+			host->pdata->ocr_mask :
+			MMC_VDD_32_33 | MMC_VDD_33_34;
+	}
+}
+
+static inline int pxamci_set_power(struct pxamci_host *host,
+				    unsigned char power_mode,
+				    unsigned int vdd)
+{
+	int on;
+
+	if (host->vcc) {
+		int ret;
+
+		if (power_mode == MMC_POWER_UP) {
+			ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
+			if (ret)
+				return ret;
+		} else if (power_mode == MMC_POWER_OFF) {
+			ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0);
+			if (ret)
+				return ret;
+		}
+	}
+	if (!host->vcc && host->pdata &&
+	    gpio_is_valid(host->pdata->gpio_power)) {
+		on = ((1 << vdd) & host->pdata->ocr_mask);
+		gpio_set_value(host->pdata->gpio_power,
+			       !!on ^ host->pdata->gpio_power_invert);
+	}
+	if (!host->vcc && host->pdata && host->pdata->setpower)
+		return host->pdata->setpower(mmc_dev(host->mmc), vdd);
+
+	return 0;
+}
+
+static void pxamci_stop_clock(struct pxamci_host *host)
+{
+	if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
+		unsigned long timeout = 10000;
+		unsigned int v;
+
+		writel(STOP_CLOCK, host->base + MMC_STRPCL);
+
+		do {
+			v = readl(host->base + MMC_STAT);
+			if (!(v & STAT_CLK_EN))
+				break;
+			udelay(1);
+		} while (timeout--);
+
+		if (v & STAT_CLK_EN)
+			dev_err(mmc_dev(host->mmc), "unable to stop clock\n");
+	}
+}
+
+static void pxamci_enable_irq(struct pxamci_host *host, unsigned int mask)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	host->imask &= ~mask;
+	writel(host->imask, host->base + MMC_I_MASK);
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	host->imask |= mask;
+	writel(host->imask, host->base + MMC_I_MASK);
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
+{
+	unsigned int nob = data->blocks;
+	unsigned long long clks;
+	unsigned int timeout;
+	bool dalgn = 0;
+	u32 dcmd;
+	int i;
+
+	host->data = data;
+
+	if (data->flags & MMC_DATA_STREAM)
+		nob = 0xffff;
+
+	writel(nob, host->base + MMC_NOB);
+	writel(data->blksz, host->base + MMC_BLKLEN);
+
+	clks = (unsigned long long)data->timeout_ns * host->clkrate;
+	do_div(clks, 1000000000UL);
+	timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
+	writel((timeout + 255) / 256, host->base + MMC_RDTO);
+
+	if (data->flags & MMC_DATA_READ) {
+		host->dma_dir = DMA_FROM_DEVICE;
+		dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC;
+		DRCMR(host->dma_drcmrtx) = 0;
+		DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
+	} else {
+		host->dma_dir = DMA_TO_DEVICE;
+		dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG;
+		DRCMR(host->dma_drcmrrx) = 0;
+		DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
+	}
+
+	dcmd |= DCMD_BURST32 | DCMD_WIDTH1;
+
+	host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+				   host->dma_dir);
+
+	for (i = 0; i < host->dma_len; i++) {
+		unsigned int length = sg_dma_len(&data->sg[i]);
+		host->sg_cpu[i].dcmd = dcmd | length;
+		if (length & 31 && !(data->flags & MMC_DATA_READ))
+			host->sg_cpu[i].dcmd |= DCMD_ENDIRQEN;
+		/* Not aligned to 8-byte boundary? */
+		if (sg_dma_address(&data->sg[i]) & 0x7)
+			dalgn = 1;
+		if (data->flags & MMC_DATA_READ) {
+			host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
+			host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
+		} else {
+			host->sg_cpu[i].dsadr = sg_dma_address(&data->sg[i]);
+			host->sg_cpu[i].dtadr = host->res->start + MMC_TXFIFO;
+		}
+		host->sg_cpu[i].ddadr = host->sg_dma + (i + 1) *
+					sizeof(struct pxa_dma_desc);
+	}
+	host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP;
+	wmb();
+
+	/*
+	 * The PXA27x DMA controller encounters overhead when working with
+	 * unaligned (to 8-byte boundaries) data, so switch on byte alignment
+	 * mode only if we have unaligned data.
+	 */
+	if (dalgn)
+		DALGN |= (1 << host->dma);
+	else
+		DALGN &= ~(1 << host->dma);
+	DDADR(host->dma) = host->sg_dma;
+
+	/*
+	 * workaround for erratum #91:
+	 * only start DMA now if we are doing a read,
+	 * otherwise we wait until CMD/RESP has finished
+	 * before starting DMA.
+	 */
+	if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ)
+		DCSR(host->dma) = DCSR_RUN;
+}
+
+static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
+{
+	WARN_ON(host->cmd != NULL);
+	host->cmd = cmd;
+
+	if (cmd->flags & MMC_RSP_BUSY)
+		cmdat |= CMDAT_BUSY;
+
+#define RSP_TYPE(x)	((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
+	switch (RSP_TYPE(mmc_resp_type(cmd))) {
+	case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6, r7 */
+		cmdat |= CMDAT_RESP_SHORT;
+		break;
+	case RSP_TYPE(MMC_RSP_R3):
+		cmdat |= CMDAT_RESP_R3;
+		break;
+	case RSP_TYPE(MMC_RSP_R2):
+		cmdat |= CMDAT_RESP_R2;
+		break;
+	default:
+		break;
+	}
+
+	writel(cmd->opcode, host->base + MMC_CMD);
+	writel(cmd->arg >> 16, host->base + MMC_ARGH);
+	writel(cmd->arg & 0xffff, host->base + MMC_ARGL);
+	writel(cmdat, host->base + MMC_CMDAT);
+	writel(host->clkrt, host->base + MMC_CLKRT);
+
+	writel(START_CLOCK, host->base + MMC_STRPCL);
+
+	pxamci_enable_irq(host, END_CMD_RES);
+}
+
+static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
+{
+	host->mrq = NULL;
+	host->cmd = NULL;
+	host->data = NULL;
+	mmc_request_done(host->mmc, mrq);
+}
+
+static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
+{
+	struct mmc_command *cmd = host->cmd;
+	int i;
+	u32 v;
+
+	if (!cmd)
+		return 0;
+
+	host->cmd = NULL;
+
+	/*
+	 * Did I mention this is Sick.  We always need to
+	 * discard the upper 8 bits of the first 16-bit word.
+	 */
+	v = readl(host->base + MMC_RES) & 0xffff;
+	for (i = 0; i < 4; i++) {
+		u32 w1 = readl(host->base + MMC_RES) & 0xffff;
+		u32 w2 = readl(host->base + MMC_RES) & 0xffff;
+		cmd->resp[i] = v << 24 | w1 << 8 | w2 >> 8;
+		v = w2;
+	}
+
+	if (stat & STAT_TIME_OUT_RESPONSE) {
+		cmd->error = -ETIMEDOUT;
+	} else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
+		/*
+		 * workaround for erratum #42:
+		 * Intel PXA27x Family Processor Specification Update Rev 001
+		 * A bogus CRC error can appear if the msb of a 136 bit
+		 * response is a one.
+		 */
+		if (cpu_is_pxa27x() &&
+		    (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000))
+			pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
+		else
+			cmd->error = -EILSEQ;
+	}
+
+	pxamci_disable_irq(host, END_CMD_RES);
+	if (host->data && !cmd->error) {
+		pxamci_enable_irq(host, DATA_TRAN_DONE);
+		/*
+		 * workaround for erratum #91, if doing write
+		 * enable DMA late
+		 */
+		if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE)
+			DCSR(host->dma) = DCSR_RUN;
+	} else {
+		pxamci_finish_request(host, host->mrq);
+	}
+
+	return 1;
+}
+
+static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
+{
+	struct mmc_data *data = host->data;
+
+	if (!data)
+		return 0;
+
+	DCSR(host->dma) = 0;
+	dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+		     host->dma_dir);
+
+	if (stat & STAT_READ_TIME_OUT)
+		data->error = -ETIMEDOUT;
+	else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR))
+		data->error = -EILSEQ;
+
+	/*
+	 * There appears to be a hardware design bug here.  There seems to
+	 * be no way to find out how much data was transferred to the card.
+	 * This means that if there was an error on any block, we mark all
+	 * data blocks as being in error.
+	 */
+	if (!data->error)
+		data->bytes_xfered = data->blocks * data->blksz;
+	else
+		data->bytes_xfered = 0;
+
+	pxamci_disable_irq(host, DATA_TRAN_DONE);
+
+	host->data = NULL;
+	if (host->mrq->stop) {
+		pxamci_stop_clock(host);
+		pxamci_start_cmd(host, host->mrq->stop, host->cmdat);
+	} else {
+		pxamci_finish_request(host, host->mrq);
+	}
+
+	return 1;
+}
+
+static irqreturn_t pxamci_irq(int irq, void *devid)
+{
+	struct pxamci_host *host = devid;
+	unsigned int ireg;
+	int handled = 0;
+
+	ireg = readl(host->base + MMC_I_REG) & ~readl(host->base + MMC_I_MASK);
+
+	if (ireg) {
+		unsigned stat = readl(host->base + MMC_STAT);
+
+		pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat);
+
+		if (ireg & END_CMD_RES)
+			handled |= pxamci_cmd_done(host, stat);
+		if (ireg & DATA_TRAN_DONE)
+			handled |= pxamci_data_done(host, stat);
+		if (ireg & SDIO_INT) {
+			mmc_signal_sdio_irq(host->mmc);
+			handled = 1;
+		}
+	}
+
+	return IRQ_RETVAL(handled);
+}
+
+static void pxamci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct pxamci_host *host = mmc_priv(mmc);
+	unsigned int cmdat;
+
+	WARN_ON(host->mrq != NULL);
+
+	host->mrq = mrq;
+
+	pxamci_stop_clock(host);
+
+	cmdat = host->cmdat;
+	host->cmdat &= ~CMDAT_INIT;
+
+	if (mrq->data) {
+		pxamci_setup_data(host, mrq->data);
+
+		cmdat &= ~CMDAT_BUSY;
+		cmdat |= CMDAT_DATAEN | CMDAT_DMAEN;
+		if (mrq->data->flags & MMC_DATA_WRITE)
+			cmdat |= CMDAT_WRITE;
+
+		if (mrq->data->flags & MMC_DATA_STREAM)
+			cmdat |= CMDAT_STREAM;
+	}
+
+	pxamci_start_cmd(host, mrq->cmd, cmdat);
+}
+
+static int pxamci_get_ro(struct mmc_host *mmc)
+{
+	struct pxamci_host *host = mmc_priv(mmc);
+
+	if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro)) {
+		if (host->pdata->gpio_card_ro_invert)
+			return !gpio_get_value(host->pdata->gpio_card_ro);
+		else
+			return gpio_get_value(host->pdata->gpio_card_ro);
+	}
+	if (host->pdata && host->pdata->get_ro)
+		return !!host->pdata->get_ro(mmc_dev(mmc));
+	/*
+	 * Board doesn't support read only detection; let the mmc core
+	 * decide what to do.
+	 */
+	return -ENOSYS;
+}
+
+static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct pxamci_host *host = mmc_priv(mmc);
+
+	if (ios->clock) {
+		unsigned long rate = host->clkrate;
+		unsigned int clk = rate / ios->clock;
+
+		if (host->clkrt == CLKRT_OFF)
+			clk_prepare_enable(host->clk);
+
+		if (ios->clock == 26000000) {
+			/* to support 26MHz */
+			host->clkrt = 7;
+		} else {
+			/* to handle (19.5MHz, 26MHz) */
+			if (!clk)
+				clk = 1;
+
+			/*
+			 * clk might result in a lower divisor than we
+			 * desire.  check for that condition and adjust
+			 * as appropriate.
+			 */
+			if (rate / clk > ios->clock)
+				clk <<= 1;
+			host->clkrt = fls(clk) - 1;
+		}
+
+		/*
+		 * we write clkrt on the next command
+		 */
+	} else {
+		pxamci_stop_clock(host);
+		if (host->clkrt != CLKRT_OFF) {
+			host->clkrt = CLKRT_OFF;
+			clk_disable_unprepare(host->clk);
+		}
+	}
+
+	if (host->power_mode != ios->power_mode) {
+		int ret;
+
+		host->power_mode = ios->power_mode;
+
+		ret = pxamci_set_power(host, ios->power_mode, ios->vdd);
+		if (ret) {
+			dev_err(mmc_dev(mmc), "unable to set power\n");
+			/*
+			 * The .set_ios() function in the mmc_host_ops
+			 * struct return void, and failing to set the
+			 * power should be rare so we print an error and
+			 * return here.
+			 */
+			return;
+		}
+
+		if (ios->power_mode == MMC_POWER_ON)
+			host->cmdat |= CMDAT_INIT;
+	}
+
+	if (ios->bus_width == MMC_BUS_WIDTH_4)
+		host->cmdat |= CMDAT_SD_4DAT;
+	else
+		host->cmdat &= ~CMDAT_SD_4DAT;
+
+	dev_dbg(mmc_dev(mmc), "PXAMCI: clkrt = %x cmdat = %x\n",
+		host->clkrt, host->cmdat);
+}
+
+static void pxamci_enable_sdio_irq(struct mmc_host *host, int enable)
+{
+	struct pxamci_host *pxa_host = mmc_priv(host);
+
+	if (enable)
+		pxamci_enable_irq(pxa_host, SDIO_INT);
+	else
+		pxamci_disable_irq(pxa_host, SDIO_INT);
+}
+
+static const struct mmc_host_ops pxamci_ops = {
+	.request		= pxamci_request,
+	.get_ro			= pxamci_get_ro,
+	.set_ios		= pxamci_set_ios,
+	.enable_sdio_irq	= pxamci_enable_sdio_irq,
+};
+
+static void pxamci_dma_irq(int dma, void *devid)
+{
+	struct pxamci_host *host = devid;
+	int dcsr = DCSR(dma);
+	DCSR(dma) = dcsr & ~DCSR_STOPIRQEN;
+
+	if (dcsr & DCSR_ENDINTR) {
+		writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
+	} else {
+		pr_err("%s: DMA error on channel %d (DCSR=%#x)\n",
+		       mmc_hostname(host->mmc), dma, dcsr);
+		host->data->error = -EIO;
+		pxamci_data_done(host, 0);
+	}
+}
+
+static irqreturn_t pxamci_detect_irq(int irq, void *devid)
+{
+	struct pxamci_host *host = mmc_priv(devid);
+
+	mmc_detect_change(devid, msecs_to_jiffies(host->pdata->detect_delay_ms));
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_mmc_dt_ids[] = {
+        { .compatible = "marvell,pxa-mmc" },
+        { }
+};
+
+MODULE_DEVICE_TABLE(of, pxa_mmc_dt_ids);
+
+static int pxamci_of_init(struct platform_device *pdev)
+{
+        struct device_node *np = pdev->dev.of_node;
+        struct pxamci_platform_data *pdata;
+        u32 tmp;
+
+        if (!np)
+                return 0;
+
+        pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+        if (!pdata)
+                return -ENOMEM;
+
+	pdata->gpio_card_detect =
+		of_get_named_gpio(np, "cd-gpios", 0);
+	pdata->gpio_card_ro =
+		of_get_named_gpio(np, "wp-gpios", 0);
+
+	/* pxa-mmc specific */
+	pdata->gpio_power =
+		of_get_named_gpio(np, "pxa-mmc,gpio-power", 0);
+
+	if (of_property_read_u32(np, "pxa-mmc,detect-delay-ms", &tmp) == 0)
+		pdata->detect_delay_ms = tmp;
+
+        pdev->dev.platform_data = pdata;
+
+        return 0;
+}
+#else
+static int pxamci_of_init(struct platform_device *pdev)
+{
+        return 0;
+}
+#endif
+
+static int pxamci_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct pxamci_host *host = NULL;
+	struct resource *r, *dmarx, *dmatx;
+	int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
+
+	ret = pxamci_of_init(pdev);
+	if (ret)
+		return ret;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (!r || irq < 0)
+		return -ENXIO;
+
+	r = request_mem_region(r->start, SZ_4K, DRIVER_NAME);
+	if (!r)
+		return -EBUSY;
+
+	mmc = mmc_alloc_host(sizeof(struct pxamci_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	mmc->ops = &pxamci_ops;
+
+	/*
+	 * We can do SG-DMA, but we don't because we never know how much
+	 * data we successfully wrote to the card.
+	 */
+	mmc->max_segs = NR_SG;
+
+	/*
+	 * Our hardware DMA can handle a maximum of one page per SG entry.
+	 */
+	mmc->max_seg_size = PAGE_SIZE;
+
+	/*
+	 * Block length register is only 10 bits before PXA27x.
+	 */
+	mmc->max_blk_size = cpu_is_pxa25x() ? 1023 : 2048;
+
+	/*
+	 * Block count register is 16 bits.
+	 */
+	mmc->max_blk_count = 65535;
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	host->dma = -1;
+	host->pdata = pdev->dev.platform_data;
+	host->clkrt = CLKRT_OFF;
+
+	host->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(host->clk)) {
+		ret = PTR_ERR(host->clk);
+		host->clk = NULL;
+		goto out;
+	}
+
+	host->clkrate = clk_get_rate(host->clk);
+
+	/*
+	 * Calculate minimum clock rate, rounding up.
+	 */
+	mmc->f_min = (host->clkrate + 63) / 64;
+	mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate;
+
+	pxamci_init_ocr(host);
+
+	mmc->caps = 0;
+	host->cmdat = 0;
+	if (!cpu_is_pxa25x()) {
+		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+		host->cmdat |= CMDAT_SDIO_INT_EN;
+		if (mmc_has_26MHz())
+			mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
+				     MMC_CAP_SD_HIGHSPEED;
+	}
+
+	host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
+	if (!host->sg_cpu) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	spin_lock_init(&host->lock);
+	host->res = r;
+	host->irq = irq;
+	host->imask = MMC_I_MASK_ALL;
+
+	host->base = ioremap(r->start, SZ_4K);
+	if (!host->base) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/*
+	 * Ensure that the host controller is shut down, and setup
+	 * with our defaults.
+	 */
+	pxamci_stop_clock(host);
+	writel(0, host->base + MMC_SPI);
+	writel(64, host->base + MMC_RESTO);
+	writel(host->imask, host->base + MMC_I_MASK);
+
+	host->dma = pxa_request_dma(DRIVER_NAME, DMA_PRIO_LOW,
+				    pxamci_dma_irq, host);
+	if (host->dma < 0) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = request_irq(host->irq, pxamci_irq, 0, DRIVER_NAME, host);
+	if (ret)
+		goto out;
+
+	platform_set_drvdata(pdev, mmc);
+
+	dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dmarx) {
+		ret = -ENXIO;
+		goto out;
+	}
+	host->dma_drcmrrx = dmarx->start;
+
+	dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (!dmatx) {
+		ret = -ENXIO;
+		goto out;
+	}
+	host->dma_drcmrtx = dmatx->start;
+
+	if (host->pdata) {
+		gpio_cd = host->pdata->gpio_card_detect;
+		gpio_ro = host->pdata->gpio_card_ro;
+		gpio_power = host->pdata->gpio_power;
+	}
+	if (gpio_is_valid(gpio_power)) {
+		ret = gpio_request(gpio_power, "mmc card power");
+		if (ret) {
+			dev_err(&pdev->dev, "Failed requesting gpio_power %d\n", gpio_power);
+			goto out;
+		}
+		gpio_direction_output(gpio_power,
+				      host->pdata->gpio_power_invert);
+	}
+	if (gpio_is_valid(gpio_ro)) {
+		ret = gpio_request(gpio_ro, "mmc card read only");
+		if (ret) {
+			dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro);
+			goto err_gpio_ro;
+		}
+		gpio_direction_input(gpio_ro);
+	}
+	if (gpio_is_valid(gpio_cd)) {
+		ret = gpio_request(gpio_cd, "mmc card detect");
+		if (ret) {
+			dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd);
+			goto err_gpio_cd;
+		}
+		gpio_direction_input(gpio_cd);
+
+		ret = request_irq(gpio_to_irq(gpio_cd), pxamci_detect_irq,
+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				  "mmc card detect", mmc);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to request card detect IRQ\n");
+			goto err_request_irq;
+		}
+	}
+
+	if (host->pdata && host->pdata->init)
+		host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc);
+
+	if (gpio_is_valid(gpio_power) && host->pdata->setpower)
+		dev_warn(&pdev->dev, "gpio_power and setpower() both defined\n");
+	if (gpio_is_valid(gpio_ro) && host->pdata->get_ro)
+		dev_warn(&pdev->dev, "gpio_ro and get_ro() both defined\n");
+
+	mmc_add_host(mmc);
+
+	return 0;
+
+err_request_irq:
+	gpio_free(gpio_cd);
+err_gpio_cd:
+	gpio_free(gpio_ro);
+err_gpio_ro:
+	gpio_free(gpio_power);
+ out:
+	if (host) {
+		if (host->dma >= 0)
+			pxa_free_dma(host->dma);
+		if (host->base)
+			iounmap(host->base);
+		if (host->sg_cpu)
+			dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+		if (host->clk)
+			clk_put(host->clk);
+	}
+	if (mmc)
+		mmc_free_host(mmc);
+	release_resource(r);
+	return ret;
+}
+
+static int pxamci_remove(struct platform_device *pdev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(pdev);
+	int gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
+
+	if (mmc) {
+		struct pxamci_host *host = mmc_priv(mmc);
+
+		mmc_remove_host(mmc);
+
+		if (host->pdata) {
+			gpio_cd = host->pdata->gpio_card_detect;
+			gpio_ro = host->pdata->gpio_card_ro;
+			gpio_power = host->pdata->gpio_power;
+		}
+		if (gpio_is_valid(gpio_cd)) {
+			free_irq(gpio_to_irq(gpio_cd), mmc);
+			gpio_free(gpio_cd);
+		}
+		if (gpio_is_valid(gpio_ro))
+			gpio_free(gpio_ro);
+		if (gpio_is_valid(gpio_power))
+			gpio_free(gpio_power);
+		if (host->vcc)
+			regulator_put(host->vcc);
+
+		if (host->pdata && host->pdata->exit)
+			host->pdata->exit(&pdev->dev, mmc);
+
+		pxamci_stop_clock(host);
+		writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
+		       END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
+		       host->base + MMC_I_MASK);
+
+		DRCMR(host->dma_drcmrrx) = 0;
+		DRCMR(host->dma_drcmrtx) = 0;
+
+		free_irq(host->irq, host);
+		pxa_free_dma(host->dma);
+		iounmap(host->base);
+		dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+
+		clk_put(host->clk);
+
+		release_resource(host->res);
+
+		mmc_free_host(mmc);
+	}
+	return 0;
+}
+
+static struct platform_driver pxamci_driver = {
+	.probe		= pxamci_probe,
+	.remove		= pxamci_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.of_match_table = of_match_ptr(pxa_mmc_dt_ids),
+	},
+};
+
+module_platform_driver(pxamci_driver);
+
+MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-mci");

drivers/mmc/host/pxamci.h

@@ -0,0 +1,90 @@
+#define MMC_STRPCL	0x0000
+#define STOP_CLOCK		(1 << 0)
+#define START_CLOCK		(2 << 0)
+
+#define MMC_STAT	0x0004
+#define STAT_END_CMD_RES		(1 << 13)
+#define STAT_PRG_DONE			(1 << 12)
+#define STAT_DATA_TRAN_DONE		(1 << 11)
+#define STAT_CLK_EN			(1 << 8)
+#define STAT_RECV_FIFO_FULL		(1 << 7)
+#define STAT_XMIT_FIFO_EMPTY		(1 << 6)
+#define STAT_RES_CRC_ERR		(1 << 5)
+#define STAT_SPI_READ_ERROR_TOKEN	(1 << 4)
+#define STAT_CRC_READ_ERROR		(1 << 3)
+#define STAT_CRC_WRITE_ERROR		(1 << 2)
+#define STAT_TIME_OUT_RESPONSE		(1 << 1)
+#define STAT_READ_TIME_OUT		(1 << 0)
+
+#define MMC_CLKRT	0x0008		/* 3 bit */
+
+#define MMC_SPI		0x000c
+#define SPI_CS_ADDRESS		(1 << 3)
+#define SPI_CS_EN		(1 << 2)
+#define CRC_ON			(1 << 1)
+#define SPI_EN			(1 << 0)
+
+#define MMC_CMDAT	0x0010
+#define CMDAT_SDIO_INT_EN	(1 << 11)
+#define CMDAT_SD_4DAT		(1 << 8)
+#define CMDAT_DMAEN		(1 << 7)
+#define CMDAT_INIT		(1 << 6)
+#define CMDAT_BUSY		(1 << 5)
+#define CMDAT_STREAM		(1 << 4)	/* 1 = stream */
+#define CMDAT_WRITE		(1 << 3)	/* 1 = write */
+#define CMDAT_DATAEN		(1 << 2)
+#define CMDAT_RESP_NONE		(0 << 0)
+#define CMDAT_RESP_SHORT	(1 << 0)
+#define CMDAT_RESP_R2		(2 << 0)
+#define CMDAT_RESP_R3		(3 << 0)
+
+#define MMC_RESTO	0x0014	/* 7 bit */
+
+#define MMC_RDTO	0x0018	/* 16 bit */
+
+#define MMC_BLKLEN	0x001c	/* 10 bit */
+
+#define MMC_NOB		0x0020	/* 16 bit */
+
+#define MMC_PRTBUF	0x0024
+#define BUF_PART_FULL		(1 << 0)
+
+#define MMC_I_MASK	0x0028
+
+/*PXA27x MMC interrupts*/
+#define SDIO_SUSPEND_ACK  	(1 << 12)
+#define SDIO_INT          	(1 << 11)
+#define RD_STALLED        	(1 << 10)
+#define RES_ERR           	(1 << 9)
+#define DAT_ERR           	(1 << 8)
+#define TINT              	(1 << 7)
+
+/*PXA2xx MMC interrupts*/
+#define TXFIFO_WR_REQ		(1 << 6)
+#define RXFIFO_RD_REQ		(1 << 5)
+#define CLK_IS_OFF		(1 << 4)
+#define STOP_CMD		(1 << 3)
+#define END_CMD_RES		(1 << 2)
+#define PRG_DONE		(1 << 1)
+#define DATA_TRAN_DONE		(1 << 0)
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define MMC_I_MASK_ALL          0x00001fff
+#else
+#define MMC_I_MASK_ALL          0x0000007f
+#endif
+
+#define MMC_I_REG	0x002c
+/* same as MMC_I_MASK */
+
+#define MMC_CMD		0x0030
+
+#define MMC_ARGH	0x0034	/* 16 bit */
+
+#define MMC_ARGL	0x0038	/* 16 bit */
+
+#define MMC_RES		0x003c	/* 16 bit */
+
+#define MMC_RXFIFO	0x0040	/* 8 bit */
+
+#define MMC_TXFIFO	0x0044	/* 8 bit */

drivers/mmc/host/s3cmci.h

@@ -0,0 +1,80 @@
+/*
+ *  linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
+ *
+ *  Copyright (C) 2004-2006 Thomas Kleffel, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+enum s3cmci_waitfor {
+	COMPLETION_NONE,
+	COMPLETION_FINALIZE,
+	COMPLETION_CMDSENT,
+	COMPLETION_RSPFIN,
+	COMPLETION_XFERFINISH,
+	COMPLETION_XFERFINISH_RSPFIN,
+};
+
+struct s3cmci_host {
+	struct platform_device	*pdev;
+	struct s3c24xx_mci_pdata *pdata;
+	struct mmc_host		*mmc;
+	struct resource		*mem;
+	struct clk		*clk;
+	void __iomem		*base;
+	int			irq;
+	int			irq_cd;
+	struct dma_chan		*dma;
+
+	unsigned long		clk_rate;
+	unsigned long		clk_div;
+	unsigned long		real_rate;
+	u8			prescaler;
+
+	int			is2440;
+	unsigned		sdiimsk;
+	unsigned		sdidata;
+
+	bool			irq_disabled;
+	bool			irq_enabled;
+	bool			irq_state;
+	int			sdio_irqen;
+
+	struct mmc_request	*mrq;
+	int			cmd_is_stop;
+
+	spinlock_t		complete_lock;
+	enum s3cmci_waitfor	complete_what;
+
+	int			dma_complete;
+
+	u32			pio_sgptr;
+	u32			pio_bytes;
+	u32			pio_count;
+	u32			*pio_ptr;
+#define XFER_NONE 0
+#define XFER_READ 1
+#define XFER_WRITE 2
+	u32			pio_active;
+
+	int			bus_width;
+
+	char 			dbgmsg_cmd[301];
+	char 			dbgmsg_dat[301];
+	char			*status;
+
+	unsigned int		ccnt, dcnt;
+	struct tasklet_struct	pio_tasklet;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry		*debug_root;
+	struct dentry		*debug_state;
+	struct dentry		*debug_regs;
+#endif
+
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block	freq_transition;
+#endif
+};

drivers/mmc/host/sdhci-acpi.c

@@ -0,0 +1,464 @@
+/*
+ * Secure Digital Host Controller Interface ACPI driver.
+ *
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/compiler.h>
+#include <linux/stddef.h>
+#include <linux/bitops.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/acpi.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/pm.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/mmc/sdhci.h>
+
+#include "sdhci.h"
+
+enum {
+	SDHCI_ACPI_SD_CD		= BIT(0),
+	SDHCI_ACPI_RUNTIME_PM		= BIT(1),
+	SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL	= BIT(2),
+};
+
+struct sdhci_acpi_chip {
+	const struct	sdhci_ops *ops;
+	unsigned int	quirks;
+	unsigned int	quirks2;
+	unsigned long	caps;
+	unsigned int	caps2;
+	mmc_pm_flag_t	pm_caps;
+};
+
+struct sdhci_acpi_slot {
+	const struct	sdhci_acpi_chip *chip;
+	unsigned int	quirks;
+	unsigned int	quirks2;
+	unsigned long	caps;
+	unsigned int	caps2;
+	mmc_pm_flag_t	pm_caps;
+	unsigned int	flags;
+	int (*probe_slot)(struct platform_device *, const char *, const char *);
+	int (*remove_slot)(struct platform_device *);
+};
+
+struct sdhci_acpi_host {
+	struct sdhci_host		*host;
+	const struct sdhci_acpi_slot	*slot;
+	struct platform_device		*pdev;
+	bool				use_runtime_pm;
+};
+
+static inline bool sdhci_acpi_flag(struct sdhci_acpi_host *c, unsigned int flag)
+{
+	return c->slot && (c->slot->flags & flag);
+}
+
+static int sdhci_acpi_enable_dma(struct sdhci_host *host)
+{
+	return 0;
+}
+
+static void sdhci_acpi_int_hw_reset(struct sdhci_host *host)
+{
+	u8 reg;
+
+	reg = sdhci_readb(host, SDHCI_POWER_CONTROL);
+	reg |= 0x10;
+	sdhci_writeb(host, reg, SDHCI_POWER_CONTROL);
+	/* For eMMC, minimum is 1us but give it 9us for good measure */
+	udelay(9);
+	reg &= ~0x10;
+	sdhci_writeb(host, reg, SDHCI_POWER_CONTROL);
+	/* For eMMC, minimum is 200us but give it 300us for good measure */
+	usleep_range(300, 1000);
+}
+
+static const struct sdhci_ops sdhci_acpi_ops_dflt = {
+	.set_clock = sdhci_set_clock,
+	.enable_dma = sdhci_acpi_enable_dma,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_ops sdhci_acpi_ops_int = {
+	.set_clock = sdhci_set_clock,
+	.enable_dma = sdhci_acpi_enable_dma,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+	.hw_reset   = sdhci_acpi_int_hw_reset,
+};
+
+static const struct sdhci_acpi_chip sdhci_acpi_chip_int = {
+	.ops = &sdhci_acpi_ops_int,
+};
+
+static int sdhci_acpi_emmc_probe_slot(struct platform_device *pdev,
+				      const char *hid, const char *uid)
+{
+	struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+	struct sdhci_host *host;
+
+	if (!c || !c->host)
+		return 0;
+
+	host = c->host;
+
+	/* Platform specific code during emmc proble slot goes here */
+
+	if (hid && uid && !strcmp(hid, "80860F14") && !strcmp(uid, "1") &&
+	    sdhci_readl(host, SDHCI_CAPABILITIES) == 0x446cc8b2 &&
+	    sdhci_readl(host, SDHCI_CAPABILITIES_1) == 0x00000807)
+		host->timeout_clk = 1000; /* 1000 kHz i.e. 1 MHz */
+
+	return 0;
+}
+
+static int sdhci_acpi_sdio_probe_slot(struct platform_device *pdev,
+				      const char *hid, const char *uid)
+{
+	struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+	struct sdhci_host *host;
+
+	if (!c || !c->host)
+		return 0;
+
+	host = c->host;
+
+	/* Platform specific code during emmc proble slot goes here */
+
+	return 0;
+}
+
+static int sdhci_acpi_sd_probe_slot(struct platform_device *pdev,
+				    const char *hid, const char *uid)
+{
+	struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+	struct sdhci_host *host;
+
+	if (!c || !c->host || !c->slot)
+		return 0;
+
+	host = c->host;
+
+	/* Platform specific code during emmc proble slot goes here */
+
+	return 0;
+}
+
+static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
+	.chip    = &sdhci_acpi_chip_int,
+	.caps    = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
+		   MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR,
+	.caps2   = MMC_CAP2_HC_ERASE_SZ,
+	.flags   = SDHCI_ACPI_RUNTIME_PM,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | SDHCI_QUIRK2_STOP_WITH_TC,
+	.probe_slot	= sdhci_acpi_emmc_probe_slot,
+};
+
+static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
+	.quirks  = SDHCI_QUIRK_BROKEN_CARD_DETECTION,
+	.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
+	.caps    = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD,
+	.flags   = SDHCI_ACPI_RUNTIME_PM,
+	.pm_caps = MMC_PM_KEEP_POWER,
+	.probe_slot	= sdhci_acpi_sdio_probe_slot,
+};
+
+static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
+	.flags   = SDHCI_ACPI_SD_CD | SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL |
+		   SDHCI_ACPI_RUNTIME_PM,
+	.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
+		   SDHCI_QUIRK2_STOP_WITH_TC,
+	.probe_slot	= sdhci_acpi_sd_probe_slot,
+};
+
+struct sdhci_acpi_uid_slot {
+	const char *hid;
+	const char *uid;
+	const struct sdhci_acpi_slot *slot;
+};
+
+static const struct sdhci_acpi_uid_slot sdhci_acpi_uids[] = {
+	{ "80860F14" , "1" , &sdhci_acpi_slot_int_emmc },
+	{ "80860F14" , "3" , &sdhci_acpi_slot_int_sd   },
+	{ "80860F16" , NULL, &sdhci_acpi_slot_int_sd   },
+	{ "INT33BB"  , "2" , &sdhci_acpi_slot_int_sdio },
+	{ "INT33BB"  , "3" , &sdhci_acpi_slot_int_sd },
+	{ "INT33C6"  , NULL, &sdhci_acpi_slot_int_sdio },
+	{ "INT3436"  , NULL, &sdhci_acpi_slot_int_sdio },
+	{ "PNP0D40"  },
+	{ },
+};
+
+static const struct acpi_device_id sdhci_acpi_ids[] = {
+	{ "80860F14" },
+	{ "80860F16" },
+	{ "INT33BB"  },
+	{ "INT33C6"  },
+	{ "INT3436"  },
+	{ "PNP0D40"  },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids);
+
+static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(const char *hid,
+							 const char *uid)
+{
+	const struct sdhci_acpi_uid_slot *u;
+
+	for (u = sdhci_acpi_uids; u->hid; u++) {
+		if (strcmp(u->hid, hid))
+			continue;
+		if (!u->uid)
+			return u->slot;
+		if (uid && !strcmp(u->uid, uid))
+			return u->slot;
+	}
+	return NULL;
+}
+
+static int sdhci_acpi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	acpi_handle handle = ACPI_HANDLE(dev);
+	struct acpi_device *device;
+	struct sdhci_acpi_host *c;
+	struct sdhci_host *host;
+	struct resource *iomem;
+	resource_size_t len;
+	const char *hid;
+	const char *uid;
+	int err;
+
+	if (acpi_bus_get_device(handle, &device))
+		return -ENODEV;
+
+	if (acpi_bus_get_status(device) || !device->status.present)
+		return -ENODEV;
+
+	hid = acpi_device_hid(device);
+	uid = device->pnp.unique_id;
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem)
+		return -ENOMEM;
+
+	len = resource_size(iomem);
+	if (len < 0x100)
+		dev_err(dev, "Invalid iomem size!\n");
+
+	if (!devm_request_mem_region(dev, iomem->start, len, dev_name(dev)))
+		return -ENOMEM;
+
+	host = sdhci_alloc_host(dev, sizeof(struct sdhci_acpi_host));
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	c = sdhci_priv(host);
+	c->host = host;
+	c->slot = sdhci_acpi_get_slot(hid, uid);
+	c->pdev = pdev;
+	c->use_runtime_pm = sdhci_acpi_flag(c, SDHCI_ACPI_RUNTIME_PM);
+
+	platform_set_drvdata(pdev, c);
+
+	host->hw_name	= "ACPI";
+	host->ops	= &sdhci_acpi_ops_dflt;
+	host->irq	= platform_get_irq(pdev, 0);
+
+	host->ioaddr = devm_ioremap_nocache(dev, iomem->start,
+					    resource_size(iomem));
+	if (host->ioaddr == NULL) {
+		err = -ENOMEM;
+		goto err_free;
+	}
+
+	if (!dev->dma_mask) {
+		u64 dma_mask;
+
+		if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT) {
+			/* 64-bit DMA is not supported at present */
+			dma_mask = DMA_BIT_MASK(32);
+		} else {
+			dma_mask = DMA_BIT_MASK(32);
+		}
+
+		err = dma_coerce_mask_and_coherent(dev, dma_mask);
+		if (err)
+			goto err_free;
+	}
+
+	if (c->slot) {
+		if (c->slot->probe_slot) {
+			err = c->slot->probe_slot(pdev, hid, uid);
+			if (err)
+				goto err_free;
+		}
+		if (c->slot->chip) {
+			host->ops            = c->slot->chip->ops;
+			host->quirks        |= c->slot->chip->quirks;
+			host->quirks2       |= c->slot->chip->quirks2;
+			host->mmc->caps     |= c->slot->chip->caps;
+			host->mmc->caps2    |= c->slot->chip->caps2;
+			host->mmc->pm_caps  |= c->slot->chip->pm_caps;
+		}
+		host->quirks        |= c->slot->quirks;
+		host->quirks2       |= c->slot->quirks2;
+		host->mmc->caps     |= c->slot->caps;
+		host->mmc->caps2    |= c->slot->caps2;
+		host->mmc->pm_caps  |= c->slot->pm_caps;
+	}
+
+	host->mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP;
+
+	if (sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD)) {
+		bool v = sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL);
+
+		if (mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0, NULL)) {
+			dev_warn(dev, "failed to setup card detect gpio\n");
+			c->use_runtime_pm = false;
+		}
+	}
+
+	err = sdhci_add_host(host);
+	if (err)
+		goto err_free;
+
+	if (c->use_runtime_pm) {
+		pm_runtime_set_active(dev);
+		pm_suspend_ignore_children(dev, 1);
+		pm_runtime_set_autosuspend_delay(dev, 50);
+		pm_runtime_use_autosuspend(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return 0;
+
+err_free:
+	sdhci_free_host(c->host);
+	return err;
+}
+
+static int sdhci_acpi_remove(struct platform_device *pdev)
+{
+	struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	int dead;
+
+	if (c->use_runtime_pm) {
+		pm_runtime_get_sync(dev);
+		pm_runtime_disable(dev);
+		pm_runtime_put_noidle(dev);
+	}
+
+	if (c->slot && c->slot->remove_slot)
+		c->slot->remove_slot(pdev);
+
+	dead = (sdhci_readl(c->host, SDHCI_INT_STATUS) == ~0);
+	sdhci_remove_host(c->host, dead);
+	sdhci_free_host(c->host);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int sdhci_acpi_suspend(struct device *dev)
+{
+	struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+	return sdhci_suspend_host(c->host);
+}
+
+static int sdhci_acpi_resume(struct device *dev)
+{
+	struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+	return sdhci_resume_host(c->host);
+}
+
+#else
+
+#define sdhci_acpi_suspend	NULL
+#define sdhci_acpi_resume	NULL
+
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int sdhci_acpi_runtime_suspend(struct device *dev)
+{
+	struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+	return sdhci_runtime_suspend_host(c->host);
+}
+
+static int sdhci_acpi_runtime_resume(struct device *dev)
+{
+	struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+	return sdhci_runtime_resume_host(c->host);
+}
+
+static int sdhci_acpi_runtime_idle(struct device *dev)
+{
+	return 0;
+}
+
+#endif
+
+static const struct dev_pm_ops sdhci_acpi_pm_ops = {
+	.suspend		= sdhci_acpi_suspend,
+	.resume			= sdhci_acpi_resume,
+	SET_RUNTIME_PM_OPS(sdhci_acpi_runtime_suspend,
+			sdhci_acpi_runtime_resume, sdhci_acpi_runtime_idle)
+};
+
+static struct platform_driver sdhci_acpi_driver = {
+	.driver = {
+		.name			= "sdhci-acpi",
+		.owner			= THIS_MODULE,
+		.acpi_match_table	= sdhci_acpi_ids,
+		.pm			= &sdhci_acpi_pm_ops,
+	},
+	.probe	= sdhci_acpi_probe,
+	.remove	= sdhci_acpi_remove,
+};
+
+module_platform_driver(sdhci_acpi_driver);
+
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface ACPI driver");
+MODULE_AUTHOR("Adrian Hunter");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/sdhci-bcm-kona.c

@@ -0,0 +1,372 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/mmc/slot-gpio.h>
+
+#include "sdhci-pltfm.h"
+#include "sdhci.h"
+
+#define SDHCI_SOFT_RESET			0x01000000
+#define KONA_SDHOST_CORECTRL			0x8000
+#define KONA_SDHOST_CD_PINCTRL			0x00000008
+#define KONA_SDHOST_STOP_HCLK			0x00000004
+#define KONA_SDHOST_RESET			0x00000002
+#define KONA_SDHOST_EN				0x00000001
+
+#define KONA_SDHOST_CORESTAT			0x8004
+#define KONA_SDHOST_WP				0x00000002
+#define KONA_SDHOST_CD_SW			0x00000001
+
+#define KONA_SDHOST_COREIMR			0x8008
+#define KONA_SDHOST_IP				0x00000001
+
+#define KONA_SDHOST_COREISR			0x800C
+#define KONA_SDHOST_COREIMSR			0x8010
+#define KONA_SDHOST_COREDBG1			0x8014
+#define KONA_SDHOST_COREGPO_MASK		0x8018
+
+#define SD_DETECT_GPIO_DEBOUNCE_128MS		128
+
+#define KONA_MMC_AUTOSUSPEND_DELAY		(50)
+
+struct sdhci_bcm_kona_dev {
+	struct mutex	write_lock; /* protect back to back writes */
+	struct clk	*external_clk;
+};
+
+
+static int sdhci_bcm_kona_sd_reset(struct sdhci_host *host)
+{
+	unsigned int val;
+	unsigned long timeout;
+
+	/* This timeout should be sufficent for core to reset */
+	timeout = jiffies + msecs_to_jiffies(100);
+
+	/* reset the host using the top level reset */
+	val = sdhci_readl(host, KONA_SDHOST_CORECTRL);
+	val |= KONA_SDHOST_RESET;
+	sdhci_writel(host, val, KONA_SDHOST_CORECTRL);
+
+	while (!(sdhci_readl(host, KONA_SDHOST_CORECTRL) & KONA_SDHOST_RESET)) {
+		if (time_is_before_jiffies(timeout)) {
+			pr_err("Error: sd host is stuck in reset!!!\n");
+			return -EFAULT;
+		}
+	}
+
+	/* bring the host out of reset */
+	val = sdhci_readl(host, KONA_SDHOST_CORECTRL);
+	val &= ~KONA_SDHOST_RESET;
+
+	/*
+	 * Back-to-Back register write needs a delay of 1ms at bootup (min 10uS)
+	 * Back-to-Back writes to same register needs delay when SD bus clock
+	 * is very low w.r.t AHB clock, mainly during boot-time and during card
+	 * insert-removal.
+	 */
+	usleep_range(1000, 5000);
+	sdhci_writel(host, val, KONA_SDHOST_CORECTRL);
+
+	return 0;
+}
+
+static void sdhci_bcm_kona_sd_init(struct sdhci_host *host)
+{
+	unsigned int val;
+
+	/* enable the interrupt from the IP core */
+	val = sdhci_readl(host, KONA_SDHOST_COREIMR);
+	val |= KONA_SDHOST_IP;
+	sdhci_writel(host, val, KONA_SDHOST_COREIMR);
+
+	/* Enable the AHB clock gating module to the host */
+	val = sdhci_readl(host, KONA_SDHOST_CORECTRL);
+	val |= KONA_SDHOST_EN;
+
+	/*
+	 * Back-to-Back register write needs a delay of 1ms at bootup (min 10uS)
+	 * Back-to-Back writes to same register needs delay when SD bus clock
+	 * is very low w.r.t AHB clock, mainly during boot-time and during card
+	 * insert-removal.
+	 */
+	usleep_range(1000, 5000);
+	sdhci_writel(host, val, KONA_SDHOST_CORECTRL);
+}
+
+/*
+ * Software emulation of the SD card insertion/removal. Set insert=1 for insert
+ * and insert=0 for removal. The card detection is done by GPIO. For Broadcom
+ * IP to function properly the bit 0 of CORESTAT register needs to be set/reset
+ * to generate the CD IRQ handled in sdhci.c which schedules card_tasklet.
+ */
+static int sdhci_bcm_kona_sd_card_emulate(struct sdhci_host *host, int insert)
+{
+	struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host);
+	struct sdhci_bcm_kona_dev *kona_dev = sdhci_pltfm_priv(pltfm_priv);
+	u32 val;
+
+	/*
+	 * Back-to-Back register write needs a delay of min 10uS.
+	 * Back-to-Back writes to same register needs delay when SD bus clock
+	 * is very low w.r.t AHB clock, mainly during boot-time and during card
+	 * insert-removal.
+	 * We keep 20uS
+	 */
+	mutex_lock(&kona_dev->write_lock);
+	udelay(20);
+	val = sdhci_readl(host, KONA_SDHOST_CORESTAT);
+
+	if (insert) {
+		int ret;
+
+		ret = mmc_gpio_get_ro(host->mmc);
+		if (ret >= 0)
+			val = (val & ~KONA_SDHOST_WP) |
+				((ret) ? KONA_SDHOST_WP : 0);
+
+		val |= KONA_SDHOST_CD_SW;
+		sdhci_writel(host, val, KONA_SDHOST_CORESTAT);
+	} else {
+		val &= ~KONA_SDHOST_CD_SW;
+		sdhci_writel(host, val, KONA_SDHOST_CORESTAT);
+	}
+	mutex_unlock(&kona_dev->write_lock);
+
+	return 0;
+}
+
+/*
+ * SD card interrupt event callback
+ */
+static void sdhci_bcm_kona_card_event(struct sdhci_host *host)
+{
+	if (mmc_gpio_get_cd(host->mmc) > 0) {
+		dev_dbg(mmc_dev(host->mmc),
+			"card inserted\n");
+		sdhci_bcm_kona_sd_card_emulate(host, 1);
+	} else {
+		dev_dbg(mmc_dev(host->mmc),
+			"card removed\n");
+		sdhci_bcm_kona_sd_card_emulate(host, 0);
+	}
+}
+
+/*
+ * Get the base clock. Use central clock source for now. Not sure if different
+ * clock speed to each dev is allowed
+ */
+static unsigned int sdhci_bcm_kona_get_max_clk(struct sdhci_host *host)
+{
+	struct sdhci_bcm_kona_dev *kona_dev;
+	struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host);
+	kona_dev = sdhci_pltfm_priv(pltfm_priv);
+
+	return host->mmc->f_max;
+}
+
+static unsigned int sdhci_bcm_kona_get_timeout_clock(struct sdhci_host *host)
+{
+	return sdhci_bcm_kona_get_max_clk(host);
+}
+
+static void sdhci_bcm_kona_init_74_clocks(struct sdhci_host *host,
+				u8 power_mode)
+{
+	/*
+	 *  JEDEC and SD spec specify supplying 74 continuous clocks to
+	 * device after power up. With minimum bus (100KHz) that
+	 * that translates to 740us
+	 */
+	if (power_mode != MMC_POWER_OFF)
+		udelay(740);
+}
+
+static struct sdhci_ops sdhci_bcm_kona_ops = {
+	.set_clock = sdhci_set_clock,
+	.get_max_clock = sdhci_bcm_kona_get_max_clk,
+	.get_timeout_clock = sdhci_bcm_kona_get_timeout_clock,
+	.platform_send_init_74_clocks = sdhci_bcm_kona_init_74_clocks,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+	.card_event = sdhci_bcm_kona_card_event,
+};
+
+static struct sdhci_pltfm_data sdhci_pltfm_data_kona = {
+	.ops    = &sdhci_bcm_kona_ops,
+	.quirks = SDHCI_QUIRK_NO_CARD_NO_RESET |
+		SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | SDHCI_QUIRK_32BIT_DMA_ADDR |
+		SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_32BIT_ADMA_SIZE |
+		SDHCI_QUIRK_FORCE_BLK_SZ_2048 |
+		SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+};
+
+static const struct of_device_id sdhci_bcm_kona_of_match[] = {
+	{ .compatible = "brcm,kona-sdhci"},
+	{ .compatible = "bcm,kona-sdhci"}, /* deprecated name */
+	{}
+};
+MODULE_DEVICE_TABLE(of, sdhci_bcm_kona_of_match);
+
+static int sdhci_bcm_kona_probe(struct platform_device *pdev)
+{
+	struct sdhci_bcm_kona_dev *kona_dev = NULL;
+	struct sdhci_pltfm_host *pltfm_priv;
+	struct device *dev = &pdev->dev;
+	struct sdhci_host *host;
+	int ret;
+
+	ret = 0;
+
+	host = sdhci_pltfm_init(pdev, &sdhci_pltfm_data_kona,
+			sizeof(*kona_dev));
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	dev_dbg(dev, "%s: inited. IOADDR=%p\n", __func__, host->ioaddr);
+
+	pltfm_priv = sdhci_priv(host);
+
+	kona_dev = sdhci_pltfm_priv(pltfm_priv);
+	mutex_init(&kona_dev->write_lock);
+
+	mmc_of_parse(host->mmc);
+
+	if (!host->mmc->f_max) {
+		dev_err(&pdev->dev, "Missing max-freq for SDHCI cfg\n");
+		ret = -ENXIO;
+		goto err_pltfm_free;
+	}
+
+	/* Get and enable the external clock */
+	kona_dev->external_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(kona_dev->external_clk)) {
+		dev_err(dev, "Failed to get external clock\n");
+		ret = PTR_ERR(kona_dev->external_clk);
+		goto err_pltfm_free;
+	}
+
+	if (clk_set_rate(kona_dev->external_clk, host->mmc->f_max) != 0) {
+		dev_err(dev, "Failed to set rate external clock\n");
+		goto err_pltfm_free;
+	}
+
+	if (clk_prepare_enable(kona_dev->external_clk) != 0) {
+		dev_err(dev, "Failed to enable external clock\n");
+		goto err_pltfm_free;
+	}
+
+	dev_dbg(dev, "non-removable=%c\n",
+		(host->mmc->caps & MMC_CAP_NONREMOVABLE) ? 'Y' : 'N');
+	dev_dbg(dev, "cd_gpio %c, wp_gpio %c\n",
+		(mmc_gpio_get_cd(host->mmc) != -ENOSYS) ? 'Y' : 'N',
+		(mmc_gpio_get_ro(host->mmc) != -ENOSYS) ? 'Y' : 'N');
+
+	if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+		host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+	dev_dbg(dev, "is_8bit=%c\n",
+		(host->mmc->caps | MMC_CAP_8_BIT_DATA) ? 'Y' : 'N');
+
+	ret = sdhci_bcm_kona_sd_reset(host);
+	if (ret)
+		goto err_clk_disable;
+
+	sdhci_bcm_kona_sd_init(host);
+
+	ret = sdhci_add_host(host);
+	if (ret) {
+		dev_err(dev, "Failed sdhci_add_host\n");
+		goto err_reset;
+	}
+
+	/* if device is eMMC, emulate card insert right here */
+	if (host->mmc->caps & MMC_CAP_NONREMOVABLE) {
+		ret = sdhci_bcm_kona_sd_card_emulate(host, 1);
+		if (ret) {
+			dev_err(dev,
+				"unable to emulate card insertion\n");
+			goto err_remove_host;
+		}
+	}
+	/*
+	 * Since the card detection GPIO interrupt is configured to be
+	 * edge sensitive, check the initial GPIO value here, emulate
+	 * only if the card is present
+	 */
+	if (mmc_gpio_get_cd(host->mmc) > 0)
+		sdhci_bcm_kona_sd_card_emulate(host, 1);
+
+	dev_dbg(dev, "initialized properly\n");
+	return 0;
+
+err_remove_host:
+	sdhci_remove_host(host, 0);
+
+err_reset:
+	sdhci_bcm_kona_sd_reset(host);
+
+err_clk_disable:
+	clk_disable_unprepare(kona_dev->external_clk);
+
+err_pltfm_free:
+	sdhci_pltfm_free(pdev);
+
+	dev_err(dev, "Probing of sdhci-pltfm failed: %d\n", ret);
+	return ret;
+}
+
+static int sdhci_bcm_kona_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host);
+	struct sdhci_bcm_kona_dev *kona_dev = sdhci_pltfm_priv(pltfm_priv);
+	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+
+	sdhci_remove_host(host, dead);
+
+	clk_disable_unprepare(kona_dev->external_clk);
+
+	sdhci_pltfm_free(pdev);
+
+	return 0;
+}
+
+static struct platform_driver sdhci_bcm_kona_driver = {
+	.driver		= {
+		.name	= "sdhci-kona",
+		.pm	= SDHCI_PLTFM_PMOPS,
+		.of_match_table = sdhci_bcm_kona_of_match,
+	},
+	.probe		= sdhci_bcm_kona_probe,
+	.remove		= sdhci_bcm_kona_remove,
+};
+module_platform_driver(sdhci_bcm_kona_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for Broadcom Kona platform");
+MODULE_AUTHOR("Broadcom");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/sdhci-bcm2835.c

@@ -0,0 +1,207 @@
+/*
+ * BCM2835 SDHCI
+ * Copyright (C) 2012 Stephen Warren
+ * Based on U-Boot's MMC driver for the BCM2835 by Oleksandr Tymoshenko & me
+ * Portions of the code there were obviously based on the Linux kernel at:
+ * git://github.com/raspberrypi/linux.git rpi-3.6.y
+ * commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mmc/host.h>
+#include "sdhci-pltfm.h"
+
+/*
+ * 400KHz is max freq for card ID etc. Use that as min card clock. We need to
+ * know the min to enable static calculation of max BCM2835_SDHCI_WRITE_DELAY.
+ */
+#define MIN_FREQ 400000
+
+/*
+ * The Arasan has a bugette whereby it may lose the content of successive
+ * writes to registers that are within two SD-card clock cycles of each other
+ * (a clock domain crossing problem). It seems, however, that the data
+ * register does not have this problem, which is just as well - otherwise we'd
+ * have to nobble the DMA engine too.
+ *
+ * This should probably be dynamically calculated based on the actual card
+ * frequency. However, this is the longest we'll have to wait, and doesn't
+ * seem to slow access down too much, so the added complexity doesn't seem
+ * worth it for now.
+ *
+ * 1/MIN_FREQ is (max) time per tick of eMMC clock.
+ * 2/MIN_FREQ is time for two ticks.
+ * Multiply by 1000000 to get uS per two ticks.
+ * *1000000 for uSecs.
+ * +1 for hack rounding.
+ */
+#define BCM2835_SDHCI_WRITE_DELAY	(((2 * 1000000) / MIN_FREQ) + 1)
+
+struct bcm2835_sdhci {
+	u32 shadow;
+};
+
+static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	writel(val, host->ioaddr + reg);
+
+	udelay(BCM2835_SDHCI_WRITE_DELAY);
+}
+
+static inline u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg)
+{
+	u32 val = readl(host->ioaddr + reg);
+
+	if (reg == SDHCI_CAPABILITIES)
+		val |= SDHCI_CAN_VDD_330;
+
+	return val;
+}
+
+static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct bcm2835_sdhci *bcm2835_host = pltfm_host->priv;
+	u32 oldval = (reg == SDHCI_COMMAND) ? bcm2835_host->shadow :
+		bcm2835_sdhci_readl(host, reg & ~3);
+	u32 word_num = (reg >> 1) & 1;
+	u32 word_shift = word_num * 16;
+	u32 mask = 0xffff << word_shift;
+	u32 newval = (oldval & ~mask) | (val << word_shift);
+
+	if (reg == SDHCI_TRANSFER_MODE)
+		bcm2835_host->shadow = newval;
+	else
+		bcm2835_sdhci_writel(host, newval, reg & ~3);
+}
+
+static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg)
+{
+	u32 val = bcm2835_sdhci_readl(host, (reg & ~3));
+	u32 word_num = (reg >> 1) & 1;
+	u32 word_shift = word_num * 16;
+	u32 word = (val >> word_shift) & 0xffff;
+
+	return word;
+}
+
+static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	u32 oldval = bcm2835_sdhci_readl(host, reg & ~3);
+	u32 byte_num = reg & 3;
+	u32 byte_shift = byte_num * 8;
+	u32 mask = 0xff << byte_shift;
+	u32 newval = (oldval & ~mask) | (val << byte_shift);
+
+	bcm2835_sdhci_writel(host, newval, reg & ~3);
+}
+
+static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg)
+{
+	u32 val = bcm2835_sdhci_readl(host, (reg & ~3));
+	u32 byte_num = reg & 3;
+	u32 byte_shift = byte_num * 8;
+	u32 byte = (val >> byte_shift) & 0xff;
+
+	return byte;
+}
+
+static unsigned int bcm2835_sdhci_get_min_clock(struct sdhci_host *host)
+{
+	return MIN_FREQ;
+}
+
+static const struct sdhci_ops bcm2835_sdhci_ops = {
+	.write_l = bcm2835_sdhci_writel,
+	.write_w = bcm2835_sdhci_writew,
+	.write_b = bcm2835_sdhci_writeb,
+	.read_l = bcm2835_sdhci_readl,
+	.read_w = bcm2835_sdhci_readw,
+	.read_b = bcm2835_sdhci_readb,
+	.set_clock = sdhci_set_clock,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.get_min_clock = bcm2835_sdhci_get_min_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_pltfm_data bcm2835_sdhci_pdata = {
+	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
+	.ops = &bcm2835_sdhci_ops,
+};
+
+static int bcm2835_sdhci_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct bcm2835_sdhci *bcm2835_host;
+	struct sdhci_pltfm_host *pltfm_host;
+	int ret;
+
+	host = sdhci_pltfm_init(pdev, &bcm2835_sdhci_pdata, 0);
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	bcm2835_host = devm_kzalloc(&pdev->dev, sizeof(*bcm2835_host),
+					GFP_KERNEL);
+	if (!bcm2835_host) {
+		dev_err(mmc_dev(host->mmc),
+			"failed to allocate bcm2835_sdhci\n");
+		return -ENOMEM;
+	}
+
+	pltfm_host = sdhci_priv(host);
+	pltfm_host->priv = bcm2835_host;
+
+	pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pltfm_host->clk)) {
+		ret = PTR_ERR(pltfm_host->clk);
+		goto err;
+	}
+
+	return sdhci_add_host(host);
+
+err:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static int bcm2835_sdhci_remove(struct platform_device *pdev)
+{
+	return sdhci_pltfm_unregister(pdev);
+}
+
+static const struct of_device_id bcm2835_sdhci_of_match[] = {
+	{ .compatible = "brcm,bcm2835-sdhci" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bcm2835_sdhci_of_match);
+
+static struct platform_driver bcm2835_sdhci_driver = {
+	.driver = {
+		.name = "sdhci-bcm2835",
+		.of_match_table = bcm2835_sdhci_of_match,
+		.pm = SDHCI_PLTFM_PMOPS,
+	},
+	.probe = bcm2835_sdhci_probe,
+	.remove = bcm2835_sdhci_remove,
+};
+module_platform_driver(bcm2835_sdhci_driver);
+
+MODULE_DESCRIPTION("BCM2835 SDHCI driver");
+MODULE_AUTHOR("Stephen Warren");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/sdhci-cns3xxx.c

@@ -0,0 +1,120 @@
+/*
+ * SDHCI support for CNS3xxx SoC
+ *
+ * Copyright 2008 Cavium Networks
+ * Copyright 2010 MontaVista Software, LLC.
+ *
+ * Authors: Scott Shu
+ *	    Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include "sdhci-pltfm.h"
+
+static unsigned int sdhci_cns3xxx_get_max_clk(struct sdhci_host *host)
+{
+	return 150000000;
+}
+
+static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct device *dev = mmc_dev(host->mmc);
+	int div = 1;
+	u16 clk;
+	unsigned long timeout;
+
+	host->mmc->actual_clock = 0;
+
+	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+	if (clock == 0)
+		return;
+
+	while (host->max_clk / div > clock) {
+		/*
+		 * On CNS3xxx divider grows linearly up to 4, and then
+		 * exponentially up to 256.
+		 */
+		if (div < 4)
+			div += 1;
+		else if (div < 256)
+			div *= 2;
+		else
+			break;
+	}
+
+	dev_dbg(dev, "desired SD clock: %d, actual: %d\n",
+		clock, host->max_clk / div);
+
+	/* Divide by 3 is special. */
+	if (div != 3)
+		div >>= 1;
+
+	clk = div << SDHCI_DIVIDER_SHIFT;
+	clk |= SDHCI_CLOCK_INT_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+	timeout = 20;
+	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+			& SDHCI_CLOCK_INT_STABLE)) {
+		if (timeout == 0) {
+			dev_warn(dev, "clock is unstable");
+			break;
+		}
+		timeout--;
+		mdelay(1);
+	}
+
+	clk |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+}
+
+static const struct sdhci_ops sdhci_cns3xxx_ops = {
+	.get_max_clock	= sdhci_cns3xxx_get_max_clk,
+	.set_clock	= sdhci_cns3xxx_set_clock,
+	.set_bus_width	= sdhci_set_bus_width,
+	.reset          = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_pltfm_data sdhci_cns3xxx_pdata = {
+	.ops = &sdhci_cns3xxx_ops,
+	.quirks = SDHCI_QUIRK_BROKEN_DMA |
+		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+		  SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
+};
+
+static int sdhci_cns3xxx_probe(struct platform_device *pdev)
+{
+	return sdhci_pltfm_register(pdev, &sdhci_cns3xxx_pdata, 0);
+}
+
+static int sdhci_cns3xxx_remove(struct platform_device *pdev)
+{
+	return sdhci_pltfm_unregister(pdev);
+}
+
+static struct platform_driver sdhci_cns3xxx_driver = {
+	.driver		= {
+		.name	= "sdhci-cns3xxx",
+		.pm	= SDHCI_PLTFM_PMOPS,
+	},
+	.probe		= sdhci_cns3xxx_probe,
+	.remove		= sdhci_cns3xxx_remove,
+};
+
+module_platform_driver(sdhci_cns3xxx_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for CNS3xxx");
+MODULE_AUTHOR("Scott Shu, "
+	      "Anton Vorontsov <avorontsov@mvista.com>");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/sdhci-dove.c

@@ -0,0 +1,161 @@
+/*
+ * sdhci-dove.c Support for SDHCI on Marvell's Dove SoC
+ *
+ * Author: Saeed Bishara <saeed@marvell.com>
+ *	   Mike Rapoport <mike@compulab.co.il>
+ * Based on sdhci-cns3xxx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include "sdhci-pltfm.h"
+
+struct sdhci_dove_priv {
+	struct clk *clk;
+};
+
+static u16 sdhci_dove_readw(struct sdhci_host *host, int reg)
+{
+	u16 ret;
+
+	switch (reg) {
+	case SDHCI_HOST_VERSION:
+	case SDHCI_SLOT_INT_STATUS:
+		/* those registers don't exist */
+		return 0;
+	default:
+		ret = readw(host->ioaddr + reg);
+	}
+	return ret;
+}
+
+static u32 sdhci_dove_readl(struct sdhci_host *host, int reg)
+{
+	u32 ret;
+
+	ret = readl(host->ioaddr + reg);
+
+	switch (reg) {
+	case SDHCI_CAPABILITIES:
+		/* Mask the support for 3.0V */
+		ret &= ~SDHCI_CAN_VDD_300;
+		break;
+	}
+	return ret;
+}
+
+static const struct sdhci_ops sdhci_dove_ops = {
+	.read_w	= sdhci_dove_readw,
+	.read_l	= sdhci_dove_readl,
+	.set_clock = sdhci_set_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_pltfm_data sdhci_dove_pdata = {
+	.ops	= &sdhci_dove_ops,
+	.quirks	= SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+		  SDHCI_QUIRK_NO_BUSY_IRQ |
+		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
+		  SDHCI_QUIRK_FORCE_DMA |
+		  SDHCI_QUIRK_NO_HISPD_BIT,
+};
+
+static int sdhci_dove_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_dove_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_dove_priv),
+			    GFP_KERNEL);
+	if (!priv) {
+		dev_err(&pdev->dev, "unable to allocate private data");
+		return -ENOMEM;
+	}
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+
+	host = sdhci_pltfm_init(pdev, &sdhci_dove_pdata, 0);
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	pltfm_host = sdhci_priv(host);
+	pltfm_host->priv = priv;
+
+	if (!IS_ERR(priv->clk))
+		clk_prepare_enable(priv->clk);
+
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		goto err_sdhci_add;
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_sdhci_add;
+
+	return 0;
+
+err_sdhci_add:
+	if (!IS_ERR(priv->clk))
+		clk_disable_unprepare(priv->clk);
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static int sdhci_dove_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_dove_priv *priv = pltfm_host->priv;
+
+	sdhci_pltfm_unregister(pdev);
+
+	if (!IS_ERR(priv->clk))
+		clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static const struct of_device_id sdhci_dove_of_match_table[] = {
+	{ .compatible = "marvell,dove-sdhci", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sdhci_dove_of_match_table);
+
+static struct platform_driver sdhci_dove_driver = {
+	.driver		= {
+		.name	= "sdhci-dove",
+		.pm	= SDHCI_PLTFM_PMOPS,
+		.of_match_table = sdhci_dove_of_match_table,
+	},
+	.probe		= sdhci_dove_probe,
+	.remove		= sdhci_dove_remove,
+};
+
+module_platform_driver(sdhci_dove_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for Dove");
+MODULE_AUTHOR("Saeed Bishara <saeed@marvell.com>, "
+	      "Mike Rapoport <mike@compulab.co.il>");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/sdhci-esdhc.h

@@ -0,0 +1,50 @@
+/*
+ * Freescale eSDHC controller driver generics for OF and pltfm.
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ * Copyright (c) 2010 Pengutronix e.K.
+ *   Author: Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#ifndef _DRIVERS_MMC_SDHCI_ESDHC_H
+#define _DRIVERS_MMC_SDHCI_ESDHC_H
+
+/*
+ * Ops and quirks for the Freescale eSDHC controller.
+ */
+
+#define ESDHC_DEFAULT_QUIRKS	(SDHCI_QUIRK_FORCE_BLK_SZ_2048 | \
+				SDHCI_QUIRK_NO_BUSY_IRQ | \
+				SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | \
+				SDHCI_QUIRK_PIO_NEEDS_DELAY)
+
+#define ESDHC_SYSTEM_CONTROL	0x2c
+#define ESDHC_CLOCK_MASK	0x0000fff0
+#define ESDHC_PREDIV_SHIFT	8
+#define ESDHC_DIVIDER_SHIFT	4
+#define ESDHC_CLOCK_PEREN	0x00000004
+#define ESDHC_CLOCK_HCKEN	0x00000002
+#define ESDHC_CLOCK_IPGEN	0x00000001
+
+/* pltfm-specific */
+#define ESDHC_HOST_CONTROL_LE	0x20
+
+/*
+ * P2020 interpretation of the SDHCI_HOST_CONTROL register
+ */
+#define ESDHC_CTRL_4BITBUS          (0x1 << 1)
+#define ESDHC_CTRL_8BITBUS          (0x2 << 1)
+#define ESDHC_CTRL_BUSWIDTH_MASK    (0x3 << 1)
+
+/* OF-specific */
+#define ESDHC_DMA_SYSCTL	0x40c
+#define ESDHC_DMA_SNOOP		0x00000040
+
+#define ESDHC_HOST_CONTROL_RES	0x05
+
+#endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */

drivers/mmc/host/sdhci-msm.c

@@ -0,0 +1,602 @@
+/*
+ * drivers/mmc/host/sdhci-msm.c - Qualcomm SDHCI Platform driver
+ *
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/delay.h>
+#include <linux/mmc/mmc.h>
+#include <linux/slab.h>
+
+#include "sdhci-pltfm.h"
+
+#define CORE_HC_MODE		0x78
+#define HC_MODE_EN		0x1
+#define CORE_POWER		0x0
+#define CORE_SW_RST		BIT(7)
+
+#define MAX_PHASES		16
+#define CORE_DLL_LOCK		BIT(7)
+#define CORE_DLL_EN		BIT(16)
+#define CORE_CDR_EN		BIT(17)
+#define CORE_CK_OUT_EN		BIT(18)
+#define CORE_CDR_EXT_EN		BIT(19)
+#define CORE_DLL_PDN		BIT(29)
+#define CORE_DLL_RST		BIT(30)
+#define CORE_DLL_CONFIG		0x100
+#define CORE_DLL_STATUS		0x108
+
+#define CORE_VENDOR_SPEC	0x10c
+#define CORE_CLK_PWRSAVE	BIT(1)
+
+#define CDR_SELEXT_SHIFT	20
+#define CDR_SELEXT_MASK		(0xf << CDR_SELEXT_SHIFT)
+#define CMUX_SHIFT_PHASE_SHIFT	24
+#define CMUX_SHIFT_PHASE_MASK	(7 << CMUX_SHIFT_PHASE_SHIFT)
+
+struct sdhci_msm_host {
+	struct platform_device *pdev;
+	void __iomem *core_mem;	/* MSM SDCC mapped address */
+	struct clk *clk;	/* main SD/MMC bus clock */
+	struct clk *pclk;	/* SDHC peripheral bus clock */
+	struct clk *bus_clk;	/* SDHC bus voter clock */
+	struct mmc_host *mmc;
+	struct sdhci_pltfm_data sdhci_msm_pdata;
+};
+
+/* Platform specific tuning */
+static inline int msm_dll_poll_ck_out_en(struct sdhci_host *host, u8 poll)
+{
+	u32 wait_cnt = 50;
+	u8 ck_out_en;
+	struct mmc_host *mmc = host->mmc;
+
+	/* Poll for CK_OUT_EN bit.  max. poll time = 50us */
+	ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) &
+			CORE_CK_OUT_EN);
+
+	while (ck_out_en != poll) {
+		if (--wait_cnt == 0) {
+			dev_err(mmc_dev(mmc), "%s: CK_OUT_EN bit is not %d\n",
+			       mmc_hostname(mmc), poll);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+
+		ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) &
+				CORE_CK_OUT_EN);
+	}
+
+	return 0;
+}
+
+static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase)
+{
+	int rc;
+	static const u8 grey_coded_phase_table[] = {
+		0x0, 0x1, 0x3, 0x2, 0x6, 0x7, 0x5, 0x4,
+		0xc, 0xd, 0xf, 0xe, 0xa, 0xb, 0x9, 0x8
+	};
+	unsigned long flags;
+	u32 config;
+	struct mmc_host *mmc = host->mmc;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config &= ~(CORE_CDR_EN | CORE_CK_OUT_EN);
+	config |= (CORE_CDR_EXT_EN | CORE_DLL_EN);
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '0' */
+	rc = msm_dll_poll_ck_out_en(host, 0);
+	if (rc)
+		goto err_out;
+
+	/*
+	 * Write the selected DLL clock output phase (0 ... 15)
+	 * to CDR_SELEXT bit field of DLL_CONFIG register.
+	 */
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config &= ~CDR_SELEXT_MASK;
+	config |= grey_coded_phase_table[phase] << CDR_SELEXT_SHIFT;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Set CK_OUT_EN bit of DLL_CONFIG register to 1. */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			| CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '1' */
+	rc = msm_dll_poll_ck_out_en(host, 1);
+	if (rc)
+		goto err_out;
+
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config |= CORE_CDR_EN;
+	config &= ~CORE_CDR_EXT_EN;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+	goto out;
+
+err_out:
+	dev_err(mmc_dev(mmc), "%s: Failed to set DLL phase: %d\n",
+	       mmc_hostname(mmc), phase);
+out:
+	spin_unlock_irqrestore(&host->lock, flags);
+	return rc;
+}
+
+/*
+ * Find out the greatest range of consecuitive selected
+ * DLL clock output phases that can be used as sampling
+ * setting for SD3.0 UHS-I card read operation (in SDR104
+ * timing mode) or for eMMC4.5 card read operation (in HS200
+ * timing mode).
+ * Select the 3/4 of the range and configure the DLL with the
+ * selected DLL clock output phase.
+ */
+
+static int msm_find_most_appropriate_phase(struct sdhci_host *host,
+					   u8 *phase_table, u8 total_phases)
+{
+	int ret;
+	u8 ranges[MAX_PHASES][MAX_PHASES] = { {0}, {0} };
+	u8 phases_per_row[MAX_PHASES] = { 0 };
+	int row_index = 0, col_index = 0, selected_row_index = 0, curr_max = 0;
+	int i, cnt, phase_0_raw_index = 0, phase_15_raw_index = 0;
+	bool phase_0_found = false, phase_15_found = false;
+	struct mmc_host *mmc = host->mmc;
+
+	if (!total_phases || (total_phases > MAX_PHASES)) {
+		dev_err(mmc_dev(mmc), "%s: Invalid argument: total_phases=%d\n",
+		       mmc_hostname(mmc), total_phases);
+		return -EINVAL;
+	}
+
+	for (cnt = 0; cnt < total_phases; cnt++) {
+		ranges[row_index][col_index] = phase_table[cnt];
+		phases_per_row[row_index] += 1;
+		col_index++;
+
+		if ((cnt + 1) == total_phases) {
+			continue;
+		/* check if next phase in phase_table is consecutive or not */
+		} else if ((phase_table[cnt] + 1) != phase_table[cnt + 1]) {
+			row_index++;
+			col_index = 0;
+		}
+	}
+
+	if (row_index >= MAX_PHASES)
+		return -EINVAL;
+
+	/* Check if phase-0 is present in first valid window? */
+	if (!ranges[0][0]) {
+		phase_0_found = true;
+		phase_0_raw_index = 0;
+		/* Check if cycle exist between 2 valid windows */
+		for (cnt = 1; cnt <= row_index; cnt++) {
+			if (phases_per_row[cnt]) {
+				for (i = 0; i < phases_per_row[cnt]; i++) {
+					if (ranges[cnt][i] == 15) {
+						phase_15_found = true;
+						phase_15_raw_index = cnt;
+						break;
+					}
+				}
+			}
+		}
+	}
+
+	/* If 2 valid windows form cycle then merge them as single window */
+	if (phase_0_found && phase_15_found) {
+		/* number of phases in raw where phase 0 is present */
+		u8 phases_0 = phases_per_row[phase_0_raw_index];
+		/* number of phases in raw where phase 15 is present */
+		u8 phases_15 = phases_per_row[phase_15_raw_index];
+
+		if (phases_0 + phases_15 >= MAX_PHASES)
+			/*
+			 * If there are more than 1 phase windows then total
+			 * number of phases in both the windows should not be
+			 * more than or equal to MAX_PHASES.
+			 */
+			return -EINVAL;
+
+		/* Merge 2 cyclic windows */
+		i = phases_15;
+		for (cnt = 0; cnt < phases_0; cnt++) {
+			ranges[phase_15_raw_index][i] =
+			    ranges[phase_0_raw_index][cnt];
+			if (++i >= MAX_PHASES)
+				break;
+		}
+
+		phases_per_row[phase_0_raw_index] = 0;
+		phases_per_row[phase_15_raw_index] = phases_15 + phases_0;
+	}
+
+	for (cnt = 0; cnt <= row_index; cnt++) {
+		if (phases_per_row[cnt] > curr_max) {
+			curr_max = phases_per_row[cnt];
+			selected_row_index = cnt;
+		}
+	}
+
+	i = (curr_max * 3) / 4;
+	if (i)
+		i--;
+
+	ret = ranges[selected_row_index][i];
+
+	if (ret >= MAX_PHASES) {
+		ret = -EINVAL;
+		dev_err(mmc_dev(mmc), "%s: Invalid phase selected=%d\n",
+		       mmc_hostname(mmc), ret);
+	}
+
+	return ret;
+}
+
+static inline void msm_cm_dll_set_freq(struct sdhci_host *host)
+{
+	u32 mclk_freq = 0, config;
+
+	/* Program the MCLK value to MCLK_FREQ bit field */
+	if (host->clock <= 112000000)
+		mclk_freq = 0;
+	else if (host->clock <= 125000000)
+		mclk_freq = 1;
+	else if (host->clock <= 137000000)
+		mclk_freq = 2;
+	else if (host->clock <= 150000000)
+		mclk_freq = 3;
+	else if (host->clock <= 162000000)
+		mclk_freq = 4;
+	else if (host->clock <= 175000000)
+		mclk_freq = 5;
+	else if (host->clock <= 187000000)
+		mclk_freq = 6;
+	else if (host->clock <= 200000000)
+		mclk_freq = 7;
+
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config &= ~CMUX_SHIFT_PHASE_MASK;
+	config |= mclk_freq << CMUX_SHIFT_PHASE_SHIFT;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+}
+
+/* Initialize the DLL (Programmable Delay Line) */
+static int msm_init_cm_dll(struct sdhci_host *host)
+{
+	struct mmc_host *mmc = host->mmc;
+	int wait_cnt = 50;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	/*
+	 * Make sure that clock is always enabled when DLL
+	 * tuning is in progress. Keeping PWRSAVE ON may
+	 * turn off the clock.
+	 */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC)
+			& ~CORE_CLK_PWRSAVE), host->ioaddr + CORE_VENDOR_SPEC);
+
+	/* Write 1 to DLL_RST bit of DLL_CONFIG register */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			| CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Write 1 to DLL_PDN bit of DLL_CONFIG register */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			| CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+	msm_cm_dll_set_freq(host);
+
+	/* Write 0 to DLL_RST bit of DLL_CONFIG register */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			& ~CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Write 0 to DLL_PDN bit of DLL_CONFIG register */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			& ~CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Set DLL_EN bit to 1. */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			| CORE_DLL_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Set CK_OUT_EN bit to 1. */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			| CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Wait until DLL_LOCK bit of DLL_STATUS register becomes '1' */
+	while (!(readl_relaxed(host->ioaddr + CORE_DLL_STATUS) &
+		 CORE_DLL_LOCK)) {
+		/* max. wait for 50us sec for LOCK bit to be set */
+		if (--wait_cnt == 0) {
+			dev_err(mmc_dev(mmc), "%s: DLL failed to LOCK\n",
+			       mmc_hostname(mmc));
+			spin_unlock_irqrestore(&host->lock, flags);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	}
+
+	spin_unlock_irqrestore(&host->lock, flags);
+	return 0;
+}
+
+static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
+{
+	int tuning_seq_cnt = 3;
+	u8 phase, *data_buf, tuned_phases[16], tuned_phase_cnt = 0;
+	const u8 *tuning_block_pattern = tuning_blk_pattern_4bit;
+	int size = sizeof(tuning_blk_pattern_4bit);
+	int rc;
+	struct mmc_host *mmc = host->mmc;
+	struct mmc_ios ios = host->mmc->ios;
+
+	/*
+	 * Tuning is required for SDR104, HS200 and HS400 cards and
+	 * if clock frequency is greater than 100MHz in these modes.
+	 */
+	if (host->clock <= 100 * 1000 * 1000 ||
+	    !((ios.timing == MMC_TIMING_MMC_HS200) ||
+	      (ios.timing == MMC_TIMING_UHS_SDR104)))
+		return 0;
+
+	if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) &&
+	    (mmc->ios.bus_width == MMC_BUS_WIDTH_8)) {
+		tuning_block_pattern = tuning_blk_pattern_8bit;
+		size = sizeof(tuning_blk_pattern_8bit);
+	}
+
+	data_buf = kmalloc(size, GFP_KERNEL);
+	if (!data_buf)
+		return -ENOMEM;
+
+retry:
+	/* First of all reset the tuning block */
+	rc = msm_init_cm_dll(host);
+	if (rc)
+		goto out;
+
+	phase = 0;
+	do {
+		struct mmc_command cmd = { 0 };
+		struct mmc_data data = { 0 };
+		struct mmc_request mrq = {
+			.cmd = &cmd,
+			.data = &data
+		};
+		struct scatterlist sg;
+
+		/* Set the phase in delay line hw block */
+		rc = msm_config_cm_dll_phase(host, phase);
+		if (rc)
+			goto out;
+
+		cmd.opcode = opcode;
+		cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+		data.blksz = size;
+		data.blocks = 1;
+		data.flags = MMC_DATA_READ;
+		data.timeout_ns = NSEC_PER_SEC;	/* 1 second */
+
+		data.sg = &sg;
+		data.sg_len = 1;
+		sg_init_one(&sg, data_buf, size);
+		memset(data_buf, 0, size);
+		mmc_wait_for_req(mmc, &mrq);
+
+		if (!cmd.error && !data.error &&
+		    !memcmp(data_buf, tuning_block_pattern, size)) {
+			/* Tuning is successful at this tuning point */
+			tuned_phases[tuned_phase_cnt++] = phase;
+			dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
+				 mmc_hostname(mmc), phase);
+		}
+	} while (++phase < ARRAY_SIZE(tuned_phases));
+
+	if (tuned_phase_cnt) {
+		rc = msm_find_most_appropriate_phase(host, tuned_phases,
+						     tuned_phase_cnt);
+		if (rc < 0)
+			goto out;
+		else
+			phase = rc;
+
+		/*
+		 * Finally set the selected phase in delay
+		 * line hw block.
+		 */
+		rc = msm_config_cm_dll_phase(host, phase);
+		if (rc)
+			goto out;
+		dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
+			 mmc_hostname(mmc), phase);
+	} else {
+		if (--tuning_seq_cnt)
+			goto retry;
+		/* Tuning failed */
+		dev_dbg(mmc_dev(mmc), "%s: No tuning point found\n",
+		       mmc_hostname(mmc));
+		rc = -EIO;
+	}
+
+out:
+	kfree(data_buf);
+	return rc;
+}
+
+static const struct of_device_id sdhci_msm_dt_match[] = {
+	{ .compatible = "qcom,sdhci-msm-v4" },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match);
+
+static struct sdhci_ops sdhci_msm_ops = {
+	.platform_execute_tuning = sdhci_msm_execute_tuning,
+	.reset = sdhci_reset,
+	.set_clock = sdhci_set_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static int sdhci_msm_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_msm_host *msm_host;
+	struct resource *core_memres;
+	int ret;
+	u16 host_version;
+
+	msm_host = devm_kzalloc(&pdev->dev, sizeof(*msm_host), GFP_KERNEL);
+	if (!msm_host)
+		return -ENOMEM;
+
+	msm_host->sdhci_msm_pdata.ops = &sdhci_msm_ops;
+	host = sdhci_pltfm_init(pdev, &msm_host->sdhci_msm_pdata, 0);
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	pltfm_host = sdhci_priv(host);
+	pltfm_host->priv = msm_host;
+	msm_host->mmc = host->mmc;
+	msm_host->pdev = pdev;
+
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		goto pltfm_free;
+
+	sdhci_get_of_property(pdev);
+
+	/* Setup SDCC bus voter clock. */
+	msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus");
+	if (!IS_ERR(msm_host->bus_clk)) {
+		/* Vote for max. clk rate for max. performance */
+		ret = clk_set_rate(msm_host->bus_clk, INT_MAX);
+		if (ret)
+			goto pltfm_free;
+		ret = clk_prepare_enable(msm_host->bus_clk);
+		if (ret)
+			goto pltfm_free;
+	}
+
+	/* Setup main peripheral bus clock */
+	msm_host->pclk = devm_clk_get(&pdev->dev, "iface");
+	if (IS_ERR(msm_host->pclk)) {
+		ret = PTR_ERR(msm_host->pclk);
+		dev_err(&pdev->dev, "Perpheral clk setup failed (%d)\n", ret);
+		goto bus_clk_disable;
+	}
+
+	ret = clk_prepare_enable(msm_host->pclk);
+	if (ret)
+		goto bus_clk_disable;
+
+	/* Setup SDC MMC clock */
+	msm_host->clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(msm_host->clk)) {
+		ret = PTR_ERR(msm_host->clk);
+		dev_err(&pdev->dev, "SDC MMC clk setup failed (%d)\n", ret);
+		goto pclk_disable;
+	}
+
+	ret = clk_prepare_enable(msm_host->clk);
+	if (ret)
+		goto pclk_disable;
+
+	core_memres = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	msm_host->core_mem = devm_ioremap_resource(&pdev->dev, core_memres);
+
+	if (IS_ERR(msm_host->core_mem)) {
+		dev_err(&pdev->dev, "Failed to remap registers\n");
+		ret = PTR_ERR(msm_host->core_mem);
+		goto clk_disable;
+	}
+
+	/* Reset the core and Enable SDHC mode */
+	writel_relaxed(readl_relaxed(msm_host->core_mem + CORE_POWER) |
+		       CORE_SW_RST, msm_host->core_mem + CORE_POWER);
+
+	/* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */
+	usleep_range(1000, 5000);
+	if (readl(msm_host->core_mem + CORE_POWER) & CORE_SW_RST) {
+		dev_err(&pdev->dev, "Stuck in reset\n");
+		ret = -ETIMEDOUT;
+		goto clk_disable;
+	}
+
+	/* Set HC_MODE_EN bit in HC_MODE register */
+	writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE));
+
+	host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+	host->quirks |= SDHCI_QUIRK_SINGLE_POWER_WRITE;
+
+	host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION));
+	dev_dbg(&pdev->dev, "Host Version: 0x%x Vendor Version 0x%x\n",
+		host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >>
+			       SDHCI_VENDOR_VER_SHIFT));
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto clk_disable;
+
+	return 0;
+
+clk_disable:
+	clk_disable_unprepare(msm_host->clk);
+pclk_disable:
+	clk_disable_unprepare(msm_host->pclk);
+bus_clk_disable:
+	if (!IS_ERR(msm_host->bus_clk))
+		clk_disable_unprepare(msm_host->bus_clk);
+pltfm_free:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static int sdhci_msm_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = pltfm_host->priv;
+	int dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) ==
+		    0xffffffff);
+
+	sdhci_remove_host(host, dead);
+	sdhci_pltfm_free(pdev);
+	clk_disable_unprepare(msm_host->clk);
+	clk_disable_unprepare(msm_host->pclk);
+	if (!IS_ERR(msm_host->bus_clk))
+		clk_disable_unprepare(msm_host->bus_clk);
+	return 0;
+}
+
+static struct platform_driver sdhci_msm_driver = {
+	.probe = sdhci_msm_probe,
+	.remove = sdhci_msm_remove,
+	.driver = {
+		   .name = "sdhci_msm",
+		   .of_match_table = sdhci_msm_dt_match,
+	},
+};
+
+module_platform_driver(sdhci_msm_driver);
+
+MODULE_DESCRIPTION("Qualcomm Secure Digital Host Controller Interface driver");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/sdhci-of-arasan.c

@@ -0,0 +1,227 @@
+/*
+ * Arasan Secure Digital Host Controller Interface.
+ * Copyright (C) 2011 - 2012 Michal Simek <monstr@monstr.eu>
+ * Copyright (c) 2012 Wind River Systems, Inc.
+ * Copyright (C) 2013 Pengutronix e.K.
+ * Copyright (C) 2013 Xilinx Inc.
+ *
+ * Based on sdhci-of-esdhc.c
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ *
+ * Authors: Xiaobo Xie <X.Xie@freescale.com>
+ *	    Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/module.h>
+#include "sdhci-pltfm.h"
+
+#define SDHCI_ARASAN_CLK_CTRL_OFFSET	0x2c
+
+#define CLK_CTRL_TIMEOUT_SHIFT		16
+#define CLK_CTRL_TIMEOUT_MASK		(0xf << CLK_CTRL_TIMEOUT_SHIFT)
+#define CLK_CTRL_TIMEOUT_MIN_EXP	13
+
+/**
+ * struct sdhci_arasan_data
+ * @clk_ahb:	Pointer to the AHB clock
+ */
+struct sdhci_arasan_data {
+	struct clk	*clk_ahb;
+};
+
+static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
+{
+	u32 div;
+	unsigned long freq;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	div = readl(host->ioaddr + SDHCI_ARASAN_CLK_CTRL_OFFSET);
+	div = (div & CLK_CTRL_TIMEOUT_MASK) >> CLK_CTRL_TIMEOUT_SHIFT;
+
+	freq = clk_get_rate(pltfm_host->clk);
+	freq /= 1 << (CLK_CTRL_TIMEOUT_MIN_EXP + div);
+
+	return freq;
+}
+
+static struct sdhci_ops sdhci_arasan_ops = {
+	.set_clock = sdhci_set_clock,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.get_timeout_clock = sdhci_arasan_get_timeout_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static struct sdhci_pltfm_data sdhci_arasan_pdata = {
+	.ops = &sdhci_arasan_ops,
+};
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * sdhci_arasan_suspend - Suspend method for the driver
+ * @dev:	Address of the device structure
+ * Returns 0 on success and error value on error
+ *
+ * Put the device in a low power state.
+ */
+static int sdhci_arasan_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_arasan_data *sdhci_arasan = pltfm_host->priv;
+	int ret;
+
+	ret = sdhci_suspend_host(host);
+	if (ret)
+		return ret;
+
+	clk_disable(pltfm_host->clk);
+	clk_disable(sdhci_arasan->clk_ahb);
+
+	return 0;
+}
+
+/**
+ * sdhci_arasan_resume - Resume method for the driver
+ * @dev:	Address of the device structure
+ * Returns 0 on success and error value on error
+ *
+ * Resume operation after suspend
+ */
+static int sdhci_arasan_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_arasan_data *sdhci_arasan = pltfm_host->priv;
+	int ret;
+
+	ret = clk_enable(sdhci_arasan->clk_ahb);
+	if (ret) {
+		dev_err(dev, "Cannot enable AHB clock.\n");
+		return ret;
+	}
+
+	ret = clk_enable(pltfm_host->clk);
+	if (ret) {
+		dev_err(dev, "Cannot enable SD clock.\n");
+		clk_disable(sdhci_arasan->clk_ahb);
+		return ret;
+	}
+
+	return sdhci_resume_host(host);
+}
+#endif /* ! CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend,
+			 sdhci_arasan_resume);
+
+static int sdhci_arasan_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct clk *clk_xin;
+	struct sdhci_host *host;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_arasan_data *sdhci_arasan;
+
+	sdhci_arasan = devm_kzalloc(&pdev->dev, sizeof(*sdhci_arasan),
+			GFP_KERNEL);
+	if (!sdhci_arasan)
+		return -ENOMEM;
+
+	sdhci_arasan->clk_ahb = devm_clk_get(&pdev->dev, "clk_ahb");
+	if (IS_ERR(sdhci_arasan->clk_ahb)) {
+		dev_err(&pdev->dev, "clk_ahb clock not found.\n");
+		return PTR_ERR(sdhci_arasan->clk_ahb);
+	}
+
+	clk_xin = devm_clk_get(&pdev->dev, "clk_xin");
+	if (IS_ERR(clk_xin)) {
+		dev_err(&pdev->dev, "clk_xin clock not found.\n");
+		return PTR_ERR(clk_xin);
+	}
+
+	ret = clk_prepare_enable(sdhci_arasan->clk_ahb);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable AHB clock.\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(clk_xin);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable SD clock.\n");
+		goto clk_dis_ahb;
+	}
+
+	host = sdhci_pltfm_init(pdev, &sdhci_arasan_pdata, 0);
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		dev_err(&pdev->dev, "platform init failed (%u)\n", ret);
+		goto clk_disable_all;
+	}
+
+	sdhci_get_of_property(pdev);
+	pltfm_host = sdhci_priv(host);
+	pltfm_host->priv = sdhci_arasan;
+	pltfm_host->clk = clk_xin;
+
+	ret = sdhci_add_host(host);
+	if (ret) {
+		dev_err(&pdev->dev, "platform register failed (%u)\n", ret);
+		goto err_pltfm_free;
+	}
+
+	return 0;
+
+err_pltfm_free:
+	sdhci_pltfm_free(pdev);
+clk_disable_all:
+	clk_disable_unprepare(clk_xin);
+clk_dis_ahb:
+	clk_disable_unprepare(sdhci_arasan->clk_ahb);
+
+	return ret;
+}
+
+static int sdhci_arasan_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_arasan_data *sdhci_arasan = pltfm_host->priv;
+
+	clk_disable_unprepare(pltfm_host->clk);
+	clk_disable_unprepare(sdhci_arasan->clk_ahb);
+
+	return sdhci_pltfm_unregister(pdev);
+}
+
+static const struct of_device_id sdhci_arasan_of_match[] = {
+	{ .compatible = "arasan,sdhci-8.9a" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
+
+static struct platform_driver sdhci_arasan_driver = {
+	.driver = {
+		.name = "sdhci-arasan",
+		.of_match_table = sdhci_arasan_of_match,
+		.pm = &sdhci_arasan_dev_pm_ops,
+	},
+	.probe = sdhci_arasan_probe,
+	.remove = sdhci_arasan_remove,
+};
+
+module_platform_driver(sdhci_arasan_driver);
+
+MODULE_DESCRIPTION("Driver for the Arasan SDHCI Controller");
+MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com>");
+MODULE_LICENSE("GPL");

drivers/mmc/host/sdhci-of-esdhc.c

@@ -0,0 +1,403 @@
+/*
+ * Freescale eSDHC controller driver.
+ *
+ * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ *
+ * Authors: Xiaobo Xie <X.Xie@freescale.com>
+ *	    Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mmc/host.h>
+#include "sdhci-pltfm.h"
+#include "sdhci-esdhc.h"
+
+#define VENDOR_V_22	0x12
+#define VENDOR_V_23	0x13
+static u32 esdhc_readl(struct sdhci_host *host, int reg)
+{
+	u32 ret;
+
+	ret = in_be32(host->ioaddr + reg);
+	/*
+	 * The bit of ADMA flag in eSDHC is not compatible with standard
+	 * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
+	 * supported by eSDHC.
+	 * And for many FSL eSDHC controller, the reset value of field
+	 * SDHCI_CAN_DO_ADMA1 is one, but some of them can't support ADMA,
+	 * only these vendor version is greater than 2.2/0x12 support ADMA.
+	 * For FSL eSDHC, must aligned 4-byte, so use 0xFC to read the
+	 * the verdor version number, oxFE is SDHCI_HOST_VERSION.
+	 */
+	if ((reg == SDHCI_CAPABILITIES) && (ret & SDHCI_CAN_DO_ADMA1)) {
+		u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+		tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+		if (tmp > VENDOR_V_22)
+			ret |= SDHCI_CAN_DO_ADMA2;
+	}
+
+	return ret;
+}
+
+static u16 esdhc_readw(struct sdhci_host *host, int reg)
+{
+	u16 ret;
+	int base = reg & ~0x3;
+	int shift = (reg & 0x2) * 8;
+
+	if (unlikely(reg == SDHCI_HOST_VERSION))
+		ret = in_be32(host->ioaddr + base) & 0xffff;
+	else
+		ret = (in_be32(host->ioaddr + base) >> shift) & 0xffff;
+	return ret;
+}
+
+static u8 esdhc_readb(struct sdhci_host *host, int reg)
+{
+	int base = reg & ~0x3;
+	int shift = (reg & 0x3) * 8;
+	u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
+
+	/*
+	 * "DMA select" locates at offset 0x28 in SD specification, but on
+	 * P5020 or P3041, it locates at 0x29.
+	 */
+	if (reg == SDHCI_HOST_CONTROL) {
+		u32 dma_bits;
+
+		dma_bits = in_be32(host->ioaddr + reg);
+		/* DMA select is 22,23 bits in Protocol Control Register */
+		dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK;
+
+		/* fixup the result */
+		ret &= ~SDHCI_CTRL_DMA_MASK;
+		ret |= dma_bits;
+	}
+
+	return ret;
+}
+
+static void esdhc_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	/*
+	 * Enable IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
+	 * when SYSCTL[RSTD]) is set for some special operations.
+	 * No any impact other operation.
+	 */
+	if (reg == SDHCI_INT_ENABLE)
+		val |= SDHCI_INT_BLK_GAP;
+	sdhci_be32bs_writel(host, val, reg);
+}
+
+static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	if (reg == SDHCI_BLOCK_SIZE) {
+		/*
+		 * Two last DMA bits are reserved, and first one is used for
+		 * non-standard blksz of 4096 bytes that we don't support
+		 * yet. So clear the DMA boundary bits.
+		 */
+		val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
+	}
+	sdhci_be32bs_writew(host, val, reg);
+}
+
+static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	/*
+	 * "DMA select" location is offset 0x28 in SD specification, but on
+	 * P5020 or P3041, it's located at 0x29.
+	 */
+	if (reg == SDHCI_HOST_CONTROL) {
+		u32 dma_bits;
+
+		/*
+		 * If host control register is not standard, exit
+		 * this function
+		 */
+		if (host->quirks2 & SDHCI_QUIRK2_BROKEN_HOST_CONTROL)
+			return;
+
+		/* DMA select is 22,23 bits in Protocol Control Register */
+		dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5;
+		clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5,
+			dma_bits);
+		val &= ~SDHCI_CTRL_DMA_MASK;
+		val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK;
+	}
+
+	/* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
+	if (reg == SDHCI_HOST_CONTROL)
+		val &= ~ESDHC_HOST_CONTROL_RES;
+	sdhci_be32bs_writeb(host, val, reg);
+}
+
+/*
+ * For Abort or Suspend after Stop at Block Gap, ignore the ADMA
+ * error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC])
+ * and Block Gap Event(IRQSTAT[BGE]) are also set.
+ * For Continue, apply soft reset for data(SYSCTL[RSTD]);
+ * and re-issue the entire read transaction from beginning.
+ */
+static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask)
+{
+	u32 tmp;
+	bool applicable;
+	dma_addr_t dmastart;
+	dma_addr_t dmanow;
+
+	tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+	tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+
+	applicable = (intmask & SDHCI_INT_DATA_END) &&
+		(intmask & SDHCI_INT_BLK_GAP) &&
+		(tmp == VENDOR_V_23);
+	if (!applicable)
+		return;
+
+	host->data->error = 0;
+	dmastart = sg_dma_address(host->data->sg);
+	dmanow = dmastart + host->data->bytes_xfered;
+	/*
+	 * Force update to the next DMA block boundary.
+	 */
+	dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
+		SDHCI_DEFAULT_BOUNDARY_SIZE;
+	host->data->bytes_xfered = dmanow - dmastart;
+	sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+}
+
+static int esdhc_of_enable_dma(struct sdhci_host *host)
+{
+	setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
+	return 0;
+}
+
+static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return pltfm_host->clock;
+}
+
+static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return pltfm_host->clock / 256 / 16;
+}
+
+static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	int pre_div = 2;
+	int div = 1;
+	u32 temp;
+
+	host->mmc->actual_clock = 0;
+
+	if (clock == 0)
+		return;
+
+	/* Workaround to reduce the clock frequency for p1010 esdhc */
+	if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
+		if (clock > 20000000)
+			clock -= 5000000;
+		if (clock > 40000000)
+			clock -= 5000000;
+	}
+
+	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+	temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
+		| ESDHC_CLOCK_MASK);
+	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+
+	while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
+		pre_div *= 2;
+
+	while (host->max_clk / pre_div / div > clock && div < 16)
+		div++;
+
+	dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
+		clock, host->max_clk / pre_div / div);
+
+	pre_div >>= 1;
+	div--;
+
+	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+	temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
+		| (div << ESDHC_DIVIDER_SHIFT)
+		| (pre_div << ESDHC_PREDIV_SHIFT));
+	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+	mdelay(1);
+}
+
+static void esdhc_of_platform_init(struct sdhci_host *host)
+{
+	u32 vvn;
+
+	vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+	vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+	if (vvn == VENDOR_V_22)
+		host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
+
+	if (vvn > VENDOR_V_22)
+		host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
+}
+
+static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
+{
+	u32 ctrl;
+
+	switch (width) {
+	case MMC_BUS_WIDTH_8:
+		ctrl = ESDHC_CTRL_8BITBUS;
+		break;
+
+	case MMC_BUS_WIDTH_4:
+		ctrl = ESDHC_CTRL_4BITBUS;
+		break;
+
+	default:
+		ctrl = 0;
+		break;
+	}
+
+	clrsetbits_be32(host->ioaddr + SDHCI_HOST_CONTROL,
+			ESDHC_CTRL_BUSWIDTH_MASK, ctrl);
+}
+
+static const struct sdhci_ops sdhci_esdhc_ops = {
+	.read_l = esdhc_readl,
+	.read_w = esdhc_readw,
+	.read_b = esdhc_readb,
+	.write_l = esdhc_writel,
+	.write_w = esdhc_writew,
+	.write_b = esdhc_writeb,
+	.set_clock = esdhc_of_set_clock,
+	.enable_dma = esdhc_of_enable_dma,
+	.get_max_clock = esdhc_of_get_max_clock,
+	.get_min_clock = esdhc_of_get_min_clock,
+	.platform_init = esdhc_of_platform_init,
+	.adma_workaround = esdhci_of_adma_workaround,
+	.set_bus_width = esdhc_pltfm_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+#ifdef CONFIG_PM
+
+static u32 esdhc_proctl;
+static int esdhc_of_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	esdhc_proctl = sdhci_be32bs_readl(host, SDHCI_HOST_CONTROL);
+
+	return sdhci_suspend_host(host);
+}
+
+static int esdhc_of_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	int ret = sdhci_resume_host(host);
+
+	if (ret == 0) {
+		/* Isn't this already done by sdhci_resume_host() ? --rmk */
+		esdhc_of_enable_dma(host);
+		sdhci_be32bs_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
+	}
+
+	return ret;
+}
+
+static const struct dev_pm_ops esdhc_pmops = {
+	.suspend	= esdhc_of_suspend,
+	.resume		= esdhc_of_resume,
+};
+#define ESDHC_PMOPS (&esdhc_pmops)
+#else
+#define ESDHC_PMOPS NULL
+#endif
+
+static const struct sdhci_pltfm_data sdhci_esdhc_pdata = {
+	/*
+	 * card detection could be handled via GPIO
+	 * eSDHC cannot support End Attribute in NOP ADMA descriptor
+	 */
+	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
+		| SDHCI_QUIRK_NO_CARD_NO_RESET
+		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+	.ops = &sdhci_esdhc_ops,
+};
+
+static int sdhci_esdhc_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct device_node *np;
+	int ret;
+
+	host = sdhci_pltfm_init(pdev, &sdhci_esdhc_pdata, 0);
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	sdhci_get_of_property(pdev);
+
+	np = pdev->dev.of_node;
+	if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
+		/*
+		 * Freescale messed up with P2020 as it has a non-standard
+		 * host control register
+		 */
+		host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL;
+	}
+
+	/* call to generic mmc_of_parse to support additional capabilities */
+	mmc_of_parse(host->mmc);
+	mmc_of_parse_voltage(np, &host->ocr_mask);
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		sdhci_pltfm_free(pdev);
+
+	return ret;
+}
+
+static int sdhci_esdhc_remove(struct platform_device *pdev)
+{
+	return sdhci_pltfm_unregister(pdev);
+}
+
+static const struct of_device_id sdhci_esdhc_of_match[] = {
+	{ .compatible = "fsl,mpc8379-esdhc" },
+	{ .compatible = "fsl,mpc8536-esdhc" },
+	{ .compatible = "fsl,esdhc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
+
+static struct platform_driver sdhci_esdhc_driver = {
+	.driver = {
+		.name = "sdhci-esdhc",
+		.of_match_table = sdhci_esdhc_of_match,
+		.pm = ESDHC_PMOPS,
+	},
+	.probe = sdhci_esdhc_probe,
+	.remove = sdhci_esdhc_remove,
+};
+
+module_platform_driver(sdhci_esdhc_driver);
+
+MODULE_DESCRIPTION("SDHCI OF driver for Freescale MPC eSDHC");
+MODULE_AUTHOR("Xiaobo Xie <X.Xie@freescale.com>, "
+	      "Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/sdhci-of-hlwd.c

@@ -0,0 +1,103 @@
+/*
+ * drivers/mmc/host/sdhci-of-hlwd.c
+ *
+ * Nintendo Wii Secure Digital Host Controller Interface.
+ * Copyright (C) 2009 The GameCube Linux Team
+ * Copyright (C) 2009 Albert Herranz
+ *
+ * Based on sdhci-of-esdhc.c
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ *
+ * Authors: Xiaobo Xie <X.Xie@freescale.com>
+ *	    Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mmc/host.h>
+#include "sdhci-pltfm.h"
+
+/*
+ * Ops and quirks for the Nintendo Wii SDHCI controllers.
+ */
+
+/*
+ * We need a small delay after each write, or things go horribly wrong.
+ */
+#define SDHCI_HLWD_WRITE_DELAY	5 /* usecs */
+
+static void sdhci_hlwd_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	sdhci_be32bs_writel(host, val, reg);
+	udelay(SDHCI_HLWD_WRITE_DELAY);
+}
+
+static void sdhci_hlwd_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	sdhci_be32bs_writew(host, val, reg);
+	udelay(SDHCI_HLWD_WRITE_DELAY);
+}
+
+static void sdhci_hlwd_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	sdhci_be32bs_writeb(host, val, reg);
+	udelay(SDHCI_HLWD_WRITE_DELAY);
+}
+
+static const struct sdhci_ops sdhci_hlwd_ops = {
+	.read_l = sdhci_be32bs_readl,
+	.read_w = sdhci_be32bs_readw,
+	.read_b = sdhci_be32bs_readb,
+	.write_l = sdhci_hlwd_writel,
+	.write_w = sdhci_hlwd_writew,
+	.write_b = sdhci_hlwd_writeb,
+	.set_clock = sdhci_set_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_pltfm_data sdhci_hlwd_pdata = {
+	.quirks = SDHCI_QUIRK_32BIT_DMA_ADDR |
+		  SDHCI_QUIRK_32BIT_DMA_SIZE,
+	.ops = &sdhci_hlwd_ops,
+};
+
+static int sdhci_hlwd_probe(struct platform_device *pdev)
+{
+	return sdhci_pltfm_register(pdev, &sdhci_hlwd_pdata, 0);
+}
+
+static int sdhci_hlwd_remove(struct platform_device *pdev)
+{
+	return sdhci_pltfm_unregister(pdev);
+}
+
+static const struct of_device_id sdhci_hlwd_of_match[] = {
+	{ .compatible = "nintendo,hollywood-sdhci" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_hlwd_of_match);
+
+static struct platform_driver sdhci_hlwd_driver = {
+	.driver = {
+		.name = "sdhci-hlwd",
+		.of_match_table = sdhci_hlwd_of_match,
+		.pm = SDHCI_PLTFM_PMOPS,
+	},
+	.probe = sdhci_hlwd_probe,
+	.remove = sdhci_hlwd_remove,
+};
+
+module_platform_driver(sdhci_hlwd_driver);
+
+MODULE_DESCRIPTION("Nintendo Wii SDHCI OF driver");
+MODULE_AUTHOR("The GameCube Linux Team, Albert Herranz");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/sdhci-pci-data.c

@@ -0,0 +1,5 @@
+#include <linux/module.h>
+#include <linux/mmc/sdhci-pci-data.h>
+
+struct sdhci_pci_data *(*sdhci_pci_get_data)(struct pci_dev *pdev, int slotno);
+EXPORT_SYMBOL_GPL(sdhci_pci_get_data);

drivers/mmc/host/sdhci-pci-o2micro.c

@@ -0,0 +1,395 @@
+/*
+ * Copyright (C) 2013 BayHub Technology Ltd.
+ *
+ * Authors: Peter Guo <peter.guo@bayhubtech.com>
+ *          Adam Lee <adam.lee@canonical.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/pci.h>
+
+#include "sdhci.h"
+#include "sdhci-pci.h"
+#include "sdhci-pci-o2micro.h"
+
+static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
+{
+	u32 scratch_32;
+	pci_read_config_dword(chip->pdev,
+			      O2_SD_PLL_SETTING, &scratch_32);
+
+	scratch_32 &= 0x0000FFFF;
+	scratch_32 |= value;
+
+	pci_write_config_dword(chip->pdev,
+			       O2_SD_PLL_SETTING, scratch_32);
+}
+
+static void o2_pci_led_enable(struct sdhci_pci_chip *chip)
+{
+	int ret;
+	u32 scratch_32;
+
+	/* Set led of SD host function enable */
+	ret = pci_read_config_dword(chip->pdev,
+				    O2_SD_FUNC_REG0, &scratch_32);
+	if (ret)
+		return;
+
+	scratch_32 &= ~O2_SD_FREG0_LEDOFF;
+	pci_write_config_dword(chip->pdev,
+			       O2_SD_FUNC_REG0, scratch_32);
+
+	ret = pci_read_config_dword(chip->pdev,
+				    O2_SD_TEST_REG, &scratch_32);
+	if (ret)
+		return;
+
+	scratch_32 |= O2_SD_LED_ENABLE;
+	pci_write_config_dword(chip->pdev,
+			       O2_SD_TEST_REG, scratch_32);
+
+}
+
+void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
+{
+	u32 scratch_32;
+	int ret;
+	/* Improve write performance for SD3.0 */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~((1 << 12) | (1 << 13) | (1 << 14));
+	pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32);
+
+	/* Enable Link abnormal reset generating Reset */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~((1 << 19) | (1 << 11));
+	scratch_32 |= (1 << 10);
+	pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32);
+
+	/* set card power over current protection */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 |= (1 << 4);
+	pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32);
+
+	/* adjust the output delay for SD mode */
+	pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492);
+
+	/* Set the output voltage setting of Aux 1.2v LDO */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~(3 << 12);
+	pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32);
+
+	/* Set Max power supply capability of SD host */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~(0x01FE);
+	scratch_32 |= 0x00CC;
+	pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32);
+	/* Set DLL Tuning Window */
+	ret = pci_read_config_dword(chip->pdev,
+				    O2_SD_TUNING_CTRL, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~(0x000000FF);
+	scratch_32 |= 0x00000066;
+	pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32);
+
+	/* Set UHS2 T_EIDLE */
+	ret = pci_read_config_dword(chip->pdev,
+				    O2_SD_UHS2_L1_CTRL, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~(0x000000FC);
+	scratch_32 |= 0x00000084;
+	pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32);
+
+	/* Set UHS2 Termination */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~((1 << 21) | (1 << 30));
+
+	pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);
+
+	/* Set L1 Entrance Timer */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~(0xf0000000);
+	scratch_32 |= 0x30000000;
+	pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32);
+
+	ret = pci_read_config_dword(chip->pdev,
+				    O2_SD_MISC_CTRL4, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~(0x000f0000);
+	scratch_32 |= 0x00080000;
+	pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32);
+}
+EXPORT_SYMBOL_GPL(sdhci_pci_o2_fujin2_pci_init);
+
+int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
+{
+	struct sdhci_pci_chip *chip;
+	struct sdhci_host *host;
+	u32 reg;
+
+	chip = slot->chip;
+	host = slot->host;
+	switch (chip->pdev->device) {
+	case PCI_DEVICE_ID_O2_SDS0:
+	case PCI_DEVICE_ID_O2_SEABIRD0:
+	case PCI_DEVICE_ID_O2_SEABIRD1:
+	case PCI_DEVICE_ID_O2_SDS1:
+	case PCI_DEVICE_ID_O2_FUJIN2:
+		reg = sdhci_readl(host, O2_SD_VENDOR_SETTING);
+		if (reg & 0x1)
+			host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+
+		if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2)
+			break;
+		/* set dll watch dog timer */
+		reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2);
+		reg |= (1 << 12);
+		sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2);
+
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_pci_o2_probe_slot);
+
+int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
+{
+	int ret;
+	u8 scratch;
+	u32 scratch_32;
+
+	switch (chip->pdev->device) {
+	case PCI_DEVICE_ID_O2_8220:
+	case PCI_DEVICE_ID_O2_8221:
+	case PCI_DEVICE_ID_O2_8320:
+	case PCI_DEVICE_ID_O2_8321:
+		/* This extra setup is required due to broken ADMA. */
+		ret = pci_read_config_byte(chip->pdev,
+				O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+		scratch &= 0x7f;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+		/* Set Multi 3 to VCC3V# */
+		pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
+
+		/* Disable CLK_REQ# support after media DET */
+		ret = pci_read_config_byte(chip->pdev,
+				O2_SD_CLKREQ, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x20;
+		pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
+
+		/* Choose capabilities, enable SDMA.  We have to write 0x01
+		 * to the capabilities register first to unlock it.
+		 */
+		ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x01;
+		pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
+		pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
+
+		/* Disable ADMA1/2 */
+		pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
+		pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
+
+		/* Disable the infinite transfer mode */
+		ret = pci_read_config_byte(chip->pdev,
+				O2_SD_INF_MOD, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x08;
+		pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
+
+		/* Lock WP */
+		ret = pci_read_config_byte(chip->pdev,
+				O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x80;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+		break;
+	case PCI_DEVICE_ID_O2_SDS0:
+	case PCI_DEVICE_ID_O2_SDS1:
+	case PCI_DEVICE_ID_O2_FUJIN2:
+		/* UnLock WP */
+		ret = pci_read_config_byte(chip->pdev,
+				O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+
+		scratch &= 0x7f;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+		/* DevId=8520 subId= 0x11 or 0x12  Type Chip support */
+		if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) {
+			ret = pci_read_config_dword(chip->pdev,
+						    O2_SD_FUNC_REG0,
+						    &scratch_32);
+			scratch_32 = ((scratch_32 & 0xFF000000) >> 24);
+
+			/* Check Whether subId is 0x11 or 0x12 */
+			if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
+				scratch_32 = 0x2c280000;
+
+				/* Set Base Clock to 208MZ */
+				o2_pci_set_baseclk(chip, scratch_32);
+				ret = pci_read_config_dword(chip->pdev,
+							    O2_SD_FUNC_REG4,
+							    &scratch_32);
+
+				/* Enable Base Clk setting change */
+				scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
+				pci_write_config_dword(chip->pdev,
+						       O2_SD_FUNC_REG4,
+						       scratch_32);
+
+				/* Set Tuning Window to 4 */
+				pci_write_config_byte(chip->pdev,
+						      O2_SD_TUNING_CTRL, 0x44);
+
+				break;
+			}
+		}
+
+		/* Enable 8520 led function */
+		o2_pci_led_enable(chip);
+
+		/* Set timeout CLK */
+		ret = pci_read_config_dword(chip->pdev,
+					    O2_SD_CLK_SETTING, &scratch_32);
+		if (ret)
+			return ret;
+
+		scratch_32 &= ~(0xFF00);
+		scratch_32 |= 0x07E0C800;
+		pci_write_config_dword(chip->pdev,
+				       O2_SD_CLK_SETTING, scratch_32);
+
+		ret = pci_read_config_dword(chip->pdev,
+					    O2_SD_CLKREQ, &scratch_32);
+		if (ret)
+			return ret;
+		scratch_32 |= 0x3;
+		pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32);
+
+		ret = pci_read_config_dword(chip->pdev,
+					    O2_SD_PLL_SETTING, &scratch_32);
+		if (ret)
+			return ret;
+
+		scratch_32 &= ~(0x1F3F070E);
+		scratch_32 |= 0x18270106;
+		pci_write_config_dword(chip->pdev,
+				       O2_SD_PLL_SETTING, scratch_32);
+
+		/* Disable UHS1 funciton */
+		ret = pci_read_config_dword(chip->pdev,
+					    O2_SD_CAP_REG2, &scratch_32);
+		if (ret)
+			return ret;
+		scratch_32 &= ~(0xE0);
+		pci_write_config_dword(chip->pdev,
+				       O2_SD_CAP_REG2, scratch_32);
+
+		if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2)
+			sdhci_pci_o2_fujin2_pci_init(chip);
+
+		/* Lock WP */
+		ret = pci_read_config_byte(chip->pdev,
+					   O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x80;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+		break;
+	case PCI_DEVICE_ID_O2_SEABIRD0:
+	case PCI_DEVICE_ID_O2_SEABIRD1:
+		/* UnLock WP */
+		ret = pci_read_config_byte(chip->pdev,
+				O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+
+		scratch &= 0x7f;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+		ret = pci_read_config_dword(chip->pdev,
+					    O2_SD_PLL_SETTING, &scratch_32);
+
+		if ((scratch_32 & 0xff000000) == 0x01000000) {
+			scratch_32 &= 0x0000FFFF;
+			scratch_32 |= 0x1F340000;
+
+			pci_write_config_dword(chip->pdev,
+					       O2_SD_PLL_SETTING, scratch_32);
+		} else {
+			scratch_32 &= 0x0000FFFF;
+			scratch_32 |= 0x2c280000;
+
+			pci_write_config_dword(chip->pdev,
+					       O2_SD_PLL_SETTING, scratch_32);
+
+			ret = pci_read_config_dword(chip->pdev,
+						    O2_SD_FUNC_REG4,
+						    &scratch_32);
+			scratch_32 |= (1 << 22);
+			pci_write_config_dword(chip->pdev,
+					       O2_SD_FUNC_REG4, scratch_32);
+		}
+
+		/* Set Tuning Windows to 5 */
+		pci_write_config_byte(chip->pdev,
+				O2_SD_TUNING_CTRL, 0x55);
+		/* Lock WP */
+		ret = pci_read_config_byte(chip->pdev,
+					   O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x80;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+		break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_pci_o2_probe);
+
+int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
+{
+	sdhci_pci_o2_probe(chip);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_pci_o2_resume);

drivers/mmc/host/sdhci-pci-o2micro.h

@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2013 BayHub Technology Ltd.
+ *
+ * Authors: Peter Guo <peter.guo@bayhubtech.com>
+ *          Adam Lee <adam.lee@canonical.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __SDHCI_PCI_O2MICRO_H
+#define __SDHCI_PCI_O2MICRO_H
+
+#include "sdhci-pci.h"
+
+/*
+ * O2Micro device IDs
+ */
+
+#define PCI_DEVICE_ID_O2_SDS0		0x8420
+#define PCI_DEVICE_ID_O2_SDS1		0x8421
+#define PCI_DEVICE_ID_O2_FUJIN2		0x8520
+#define PCI_DEVICE_ID_O2_SEABIRD0	0x8620
+#define PCI_DEVICE_ID_O2_SEABIRD1	0x8621
+
+/*
+ * O2Micro device registers
+ */
+
+#define O2_SD_MISC_REG5		0x64
+#define O2_SD_LD0_CTRL		0x68
+#define O2_SD_DEV_CTRL		0x88
+#define O2_SD_LOCK_WP		0xD3
+#define O2_SD_TEST_REG		0xD4
+#define O2_SD_FUNC_REG0		0xDC
+#define O2_SD_MULTI_VCC3V	0xEE
+#define O2_SD_CLKREQ		0xEC
+#define O2_SD_CAPS		0xE0
+#define O2_SD_ADMA1		0xE2
+#define O2_SD_ADMA2		0xE7
+#define O2_SD_INF_MOD		0xF1
+#define O2_SD_MISC_CTRL4	0xFC
+#define O2_SD_TUNING_CTRL	0x300
+#define O2_SD_PLL_SETTING	0x304
+#define O2_SD_CLK_SETTING	0x328
+#define O2_SD_CAP_REG2		0x330
+#define O2_SD_CAP_REG0		0x334
+#define O2_SD_UHS1_CAP_SETTING	0x33C
+#define O2_SD_DELAY_CTRL	0x350
+#define O2_SD_UHS2_L1_CTRL	0x35C
+#define O2_SD_FUNC_REG3		0x3E0
+#define O2_SD_FUNC_REG4		0x3E4
+#define O2_SD_LED_ENABLE	BIT(6)
+#define O2_SD_FREG0_LEDOFF	BIT(13)
+#define O2_SD_FREG4_ENABLE_CLK_SET	BIT(22)
+
+#define O2_SD_VENDOR_SETTING	0x110
+#define O2_SD_VENDOR_SETTING2	0x1C8
+
+extern void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip);
+
+extern int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot);
+
+extern int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip);
+
+extern int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip);
+
+#endif /* __SDHCI_PCI_O2MICRO_H */

drivers/mmc/host/sdhci-pci.h

@@ -0,0 +1,86 @@
+#ifndef __SDHCI_PCI_H
+#define __SDHCI_PCI_H
+
+/*
+ * PCI device IDs
+ */
+
+#define PCI_DEVICE_ID_INTEL_PCH_SDIO0	0x8809
+#define PCI_DEVICE_ID_INTEL_PCH_SDIO1	0x880a
+#define PCI_DEVICE_ID_INTEL_BYT_EMMC	0x0f14
+#define PCI_DEVICE_ID_INTEL_BYT_SDIO	0x0f15
+#define PCI_DEVICE_ID_INTEL_BYT_SD	0x0f16
+#define PCI_DEVICE_ID_INTEL_BYT_EMMC2	0x0f50
+#define PCI_DEVICE_ID_INTEL_BSW_EMMC	0x2294
+#define PCI_DEVICE_ID_INTEL_BSW_SDIO	0x2295
+#define PCI_DEVICE_ID_INTEL_BSW_SD	0x2296
+#define PCI_DEVICE_ID_INTEL_MRFL_MMC	0x1190
+#define PCI_DEVICE_ID_INTEL_CLV_SDIO0	0x08f9
+#define PCI_DEVICE_ID_INTEL_CLV_SDIO1	0x08fa
+#define PCI_DEVICE_ID_INTEL_CLV_SDIO2	0x08fb
+#define PCI_DEVICE_ID_INTEL_CLV_EMMC0	0x08e5
+#define PCI_DEVICE_ID_INTEL_CLV_EMMC1	0x08e6
+#define PCI_DEVICE_ID_INTEL_QRK_SD	0x08A7
+
+/*
+ * PCI registers
+ */
+
+#define PCI_SDHCI_IFPIO			0x00
+#define PCI_SDHCI_IFDMA			0x01
+#define PCI_SDHCI_IFVENDOR		0x02
+
+#define PCI_SLOT_INFO			0x40	/* 8 bits */
+#define  PCI_SLOT_INFO_SLOTS(x)		((x >> 4) & 7)
+#define  PCI_SLOT_INFO_FIRST_BAR_MASK	0x07
+
+#define MAX_SLOTS			8
+
+struct sdhci_pci_chip;
+struct sdhci_pci_slot;
+
+struct sdhci_pci_fixes {
+	unsigned int		quirks;
+	unsigned int		quirks2;
+	bool			allow_runtime_pm;
+	bool			own_cd_for_runtime_pm;
+
+	int			(*probe) (struct sdhci_pci_chip *);
+
+	int			(*probe_slot) (struct sdhci_pci_slot *);
+	void			(*remove_slot) (struct sdhci_pci_slot *, int);
+
+	int			(*suspend) (struct sdhci_pci_chip *);
+	int			(*resume) (struct sdhci_pci_chip *);
+};
+
+struct sdhci_pci_slot {
+	struct sdhci_pci_chip	*chip;
+	struct sdhci_host	*host;
+	struct sdhci_pci_data	*data;
+
+	int			pci_bar;
+	int			rst_n_gpio;
+	int			cd_gpio;
+	int			cd_irq;
+
+	char			*cd_con_id;
+	int			cd_idx;
+	bool			cd_override_level;
+
+	void (*hw_reset)(struct sdhci_host *host);
+};
+
+struct sdhci_pci_chip {
+	struct pci_dev		*pdev;
+
+	unsigned int		quirks;
+	unsigned int		quirks2;
+	bool			allow_runtime_pm;
+	const struct sdhci_pci_fixes *fixes;
+
+	int			num_slots;	/* Slots on controller */
+	struct sdhci_pci_slot	*slots[MAX_SLOTS]; /* Pointers to host slots */
+};
+
+#endif /* __SDHCI_PCI_H */

drivers/mmc/host/sdhci-pltfm.c

@@ -0,0 +1,276 @@
+/*
+ * sdhci-pltfm.c Support for SDHCI platform devices
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * Copyright (c) 2007, 2011 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ *
+ * Authors: Xiaobo Xie <X.Xie@freescale.com>
+ *	    Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * SDHCI platform devices
+ *
+ * Inspired by sdhci-pci.c, by Pierre Ossman
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#ifdef CONFIG_PPC
+#include <asm/machdep.h>
+#endif
+#include "sdhci-pltfm.h"
+
+unsigned int sdhci_pltfm_clk_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return clk_get_rate(pltfm_host->clk);
+}
+EXPORT_SYMBOL_GPL(sdhci_pltfm_clk_get_max_clock);
+
+static const struct sdhci_ops sdhci_pltfm_ops = {
+	.set_clock = sdhci_set_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+#ifdef CONFIG_OF
+static bool sdhci_of_wp_inverted(struct device_node *np)
+{
+	if (of_get_property(np, "sdhci,wp-inverted", NULL) ||
+	    of_get_property(np, "wp-inverted", NULL))
+		return true;
+
+	/* Old device trees don't have the wp-inverted property. */
+#ifdef CONFIG_PPC
+	return machine_is(mpc837x_rdb) || machine_is(mpc837x_mds);
+#else
+	return false;
+#endif /* CONFIG_PPC */
+}
+
+void sdhci_get_of_property(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	const __be32 *clk;
+	u32 bus_width;
+	int size;
+
+	if (of_device_is_available(np)) {
+		if (of_get_property(np, "sdhci,auto-cmd12", NULL))
+			host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+
+		if (of_get_property(np, "sdhci,1-bit-only", NULL) ||
+		    (of_property_read_u32(np, "bus-width", &bus_width) == 0 &&
+		    bus_width == 1))
+			host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+
+		if (sdhci_of_wp_inverted(np))
+			host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
+
+		if (of_get_property(np, "broken-cd", NULL))
+			host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+		if (of_get_property(np, "no-1-8-v", NULL))
+			host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
+
+		if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
+			host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+
+		if (of_device_is_compatible(np, "fsl,p2020-esdhc") ||
+		    of_device_is_compatible(np, "fsl,p1010-esdhc") ||
+		    of_device_is_compatible(np, "fsl,t4240-esdhc") ||
+		    of_device_is_compatible(np, "fsl,mpc8536-esdhc"))
+			host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+		clk = of_get_property(np, "clock-frequency", &size);
+		if (clk && size == sizeof(*clk) && *clk)
+			pltfm_host->clock = be32_to_cpup(clk);
+
+		if (of_find_property(np, "keep-power-in-suspend", NULL))
+			host->mmc->pm_caps |= MMC_PM_KEEP_POWER;
+
+		if (of_find_property(np, "enable-sdio-wakeup", NULL))
+			host->mmc->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+	}
+}
+#else
+void sdhci_get_of_property(struct platform_device *pdev) {}
+#endif /* CONFIG_OF */
+EXPORT_SYMBOL_GPL(sdhci_get_of_property);
+
+struct sdhci_host *sdhci_pltfm_init(struct platform_device *pdev,
+				    const struct sdhci_pltfm_data *pdata,
+				    size_t priv_size)
+{
+	struct sdhci_host *host;
+	struct resource *iomem;
+	int ret;
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	if (resource_size(iomem) < 0x100)
+		dev_err(&pdev->dev, "Invalid iomem size!\n");
+
+	host = sdhci_alloc_host(&pdev->dev,
+		sizeof(struct sdhci_pltfm_host) + priv_size);
+
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		goto err;
+	}
+
+	host->hw_name = dev_name(&pdev->dev);
+	if (pdata && pdata->ops)
+		host->ops = pdata->ops;
+	else
+		host->ops = &sdhci_pltfm_ops;
+	if (pdata) {
+		host->quirks = pdata->quirks;
+		host->quirks2 = pdata->quirks2;
+	}
+
+	host->irq = platform_get_irq(pdev, 0);
+
+	if (!request_mem_region(iomem->start, resource_size(iomem),
+		mmc_hostname(host->mmc))) {
+		dev_err(&pdev->dev, "cannot request region\n");
+		ret = -EBUSY;
+		goto err_request;
+	}
+
+	host->ioaddr = ioremap(iomem->start, resource_size(iomem));
+	if (!host->ioaddr) {
+		dev_err(&pdev->dev, "failed to remap registers\n");
+		ret = -ENOMEM;
+		goto err_remap;
+	}
+
+	/*
+	 * Some platforms need to probe the controller to be able to
+	 * determine which caps should be used.
+	 */
+	if (host->ops && host->ops->platform_init)
+		host->ops->platform_init(host);
+
+	platform_set_drvdata(pdev, host);
+
+	return host;
+
+err_remap:
+	release_mem_region(iomem->start, resource_size(iomem));
+err_request:
+	sdhci_free_host(host);
+err:
+	dev_err(&pdev->dev, "%s failed %d\n", __func__, ret);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(sdhci_pltfm_init);
+
+void sdhci_pltfm_free(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	iounmap(host->ioaddr);
+	release_mem_region(iomem->start, resource_size(iomem));
+	sdhci_free_host(host);
+}
+EXPORT_SYMBOL_GPL(sdhci_pltfm_free);
+
+int sdhci_pltfm_register(struct platform_device *pdev,
+			const struct sdhci_pltfm_data *pdata,
+			size_t priv_size)
+{
+	struct sdhci_host *host;
+	int ret = 0;
+
+	host = sdhci_pltfm_init(pdev, pdata, priv_size);
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	sdhci_get_of_property(pdev);
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		sdhci_pltfm_free(pdev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(sdhci_pltfm_register);
+
+int sdhci_pltfm_unregister(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+
+	sdhci_remove_host(host, dead);
+	sdhci_pltfm_free(pdev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_pltfm_unregister);
+
+#ifdef CONFIG_PM
+int sdhci_pltfm_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	return sdhci_suspend_host(host);
+}
+EXPORT_SYMBOL_GPL(sdhci_pltfm_suspend);
+
+int sdhci_pltfm_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	return sdhci_resume_host(host);
+}
+EXPORT_SYMBOL_GPL(sdhci_pltfm_resume);
+
+const struct dev_pm_ops sdhci_pltfm_pmops = {
+	.suspend	= sdhci_pltfm_suspend,
+	.resume		= sdhci_pltfm_resume,
+};
+EXPORT_SYMBOL_GPL(sdhci_pltfm_pmops);
+#endif	/* CONFIG_PM */
+
+static int __init sdhci_pltfm_drv_init(void)
+{
+	pr_info("sdhci-pltfm: SDHCI platform and OF driver helper\n");
+
+	return 0;
+}
+module_init(sdhci_pltfm_drv_init);
+
+static void __exit sdhci_pltfm_drv_exit(void)
+{
+}
+module_exit(sdhci_pltfm_drv_exit);
+
+MODULE_DESCRIPTION("SDHCI platform and OF driver helper");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/sdhci-pltfm.h

@@ -0,0 +1,122 @@
+/*
+ * Copyright 2010 MontaVista Software, LLC.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DRIVERS_MMC_SDHCI_PLTFM_H
+#define _DRIVERS_MMC_SDHCI_PLTFM_H
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include "sdhci.h"
+
+struct sdhci_pltfm_data {
+	const struct sdhci_ops *ops;
+	unsigned int quirks;
+	unsigned int quirks2;
+};
+
+struct sdhci_pltfm_host {
+	struct clk *clk;
+	void *priv; /* to handle quirks across io-accessor calls */
+
+	/* migrate from sdhci_of_host */
+	unsigned int clock;
+	u16 xfer_mode_shadow;
+
+	unsigned long private[0] ____cacheline_aligned;
+};
+
+#ifdef CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
+/*
+ * These accessors are designed for big endian hosts doing I/O to
+ * little endian controllers incorporating a 32-bit hardware byte swapper.
+ */
+static inline u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg)
+{
+	return in_be32(host->ioaddr + reg);
+}
+
+static inline u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg)
+{
+	return in_be16(host->ioaddr + (reg ^ 0x2));
+}
+
+static inline u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg)
+{
+	return in_8(host->ioaddr + (reg ^ 0x3));
+}
+
+static inline void sdhci_be32bs_writel(struct sdhci_host *host,
+				       u32 val, int reg)
+{
+	out_be32(host->ioaddr + reg, val);
+}
+
+static inline void sdhci_be32bs_writew(struct sdhci_host *host,
+				       u16 val, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	int base = reg & ~0x3;
+	int shift = (reg & 0x2) * 8;
+
+	switch (reg) {
+	case SDHCI_TRANSFER_MODE:
+		/*
+		 * Postpone this write, we must do it together with a
+		 * command write that is down below.
+		 */
+		pltfm_host->xfer_mode_shadow = val;
+		return;
+	case SDHCI_COMMAND:
+		sdhci_be32bs_writel(host,
+				    val << 16 | pltfm_host->xfer_mode_shadow,
+				    SDHCI_TRANSFER_MODE);
+		return;
+	}
+	clrsetbits_be32(host->ioaddr + base, 0xffff << shift, val << shift);
+}
+
+static inline void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	int base = reg & ~0x3;
+	int shift = (reg & 0x3) * 8;
+
+	clrsetbits_be32(host->ioaddr + base , 0xff << shift, val << shift);
+}
+#endif /* CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER */
+
+extern void sdhci_get_of_property(struct platform_device *pdev);
+
+extern struct sdhci_host *sdhci_pltfm_init(struct platform_device *pdev,
+					  const struct sdhci_pltfm_data *pdata,
+					  size_t priv_size);
+extern void sdhci_pltfm_free(struct platform_device *pdev);
+
+extern int sdhci_pltfm_register(struct platform_device *pdev,
+				const struct sdhci_pltfm_data *pdata,
+				size_t priv_size);
+extern int sdhci_pltfm_unregister(struct platform_device *pdev);
+
+extern unsigned int sdhci_pltfm_clk_get_max_clock(struct sdhci_host *host);
+
+static inline void *sdhci_pltfm_priv(struct sdhci_pltfm_host *host)
+{
+	return (void *)host->private;
+}
+
+#ifdef CONFIG_PM
+extern int sdhci_pltfm_suspend(struct device *dev);
+extern int sdhci_pltfm_resume(struct device *dev);
+extern const struct dev_pm_ops sdhci_pltfm_pmops;
+#define SDHCI_PLTFM_PMOPS (&sdhci_pltfm_pmops)
+#else
+#define SDHCI_PLTFM_PMOPS NULL
+#endif
+
+#endif /* _DRIVERS_MMC_SDHCI_PLTFM_H */

drivers/mmc/host/sdhci-pxav2.c

@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) 2010 Marvell International Ltd.
+ *		Zhangfei Gao <zhangfei.gao@marvell.com>
+ *		Kevin Wang <dwang4@marvell.com>
+ *		Jun Nie <njun@marvell.com>
+ *		Qiming Wu <wuqm@marvell.com>
+ *		Philip Rakity <prakity@marvell.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_data/pxa_sdhci.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "sdhci.h"
+#include "sdhci-pltfm.h"
+
+#define SD_FIFO_PARAM		0xe0
+#define DIS_PAD_SD_CLK_GATE	0x0400 /* Turn on/off Dynamic SD Clock Gating */
+#define CLK_GATE_ON		0x0200 /* Disable/enable Clock Gate */
+#define CLK_GATE_CTL		0x0100 /* Clock Gate Control */
+#define CLK_GATE_SETTING_BITS	(DIS_PAD_SD_CLK_GATE | \
+		CLK_GATE_ON | CLK_GATE_CTL)
+
+#define SD_CLOCK_BURST_SIZE_SETUP	0xe6
+#define SDCLK_SEL_SHIFT		8
+#define SDCLK_SEL_MASK		0x3
+#define SDCLK_DELAY_SHIFT	10
+#define SDCLK_DELAY_MASK	0x3c
+
+#define SD_CE_ATA_2		0xea
+#define MMC_CARD		0x1000
+#define MMC_WIDTH		0x0100
+
+static void pxav2_reset(struct sdhci_host *host, u8 mask)
+{
+	struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
+	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
+
+	sdhci_reset(host, mask);
+
+	if (mask == SDHCI_RESET_ALL) {
+		u16 tmp = 0;
+
+		/*
+		 * tune timing of read data/command when crc error happen
+		 * no performance impact
+		 */
+		if (pdata && pdata->clk_delay_sel == 1) {
+			tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
+
+			tmp &= ~(SDCLK_DELAY_MASK << SDCLK_DELAY_SHIFT);
+			tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
+				<< SDCLK_DELAY_SHIFT;
+			tmp &= ~(SDCLK_SEL_MASK << SDCLK_SEL_SHIFT);
+			tmp |= (1 & SDCLK_SEL_MASK) << SDCLK_SEL_SHIFT;
+
+			writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
+		}
+
+		if (pdata && (pdata->flags & PXA_FLAG_ENABLE_CLOCK_GATING)) {
+			tmp = readw(host->ioaddr + SD_FIFO_PARAM);
+			tmp &= ~CLK_GATE_SETTING_BITS;
+			writew(tmp, host->ioaddr + SD_FIFO_PARAM);
+		} else {
+			tmp = readw(host->ioaddr + SD_FIFO_PARAM);
+			tmp &= ~CLK_GATE_SETTING_BITS;
+			tmp |= CLK_GATE_SETTING_BITS;
+			writew(tmp, host->ioaddr + SD_FIFO_PARAM);
+		}
+	}
+}
+
+static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width)
+{
+	u8 ctrl;
+	u16 tmp;
+
+	ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
+	tmp = readw(host->ioaddr + SD_CE_ATA_2);
+	if (width == MMC_BUS_WIDTH_8) {
+		ctrl &= ~SDHCI_CTRL_4BITBUS;
+		tmp |= MMC_CARD | MMC_WIDTH;
+	} else {
+		tmp &= ~(MMC_CARD | MMC_WIDTH);
+		if (width == MMC_BUS_WIDTH_4)
+			ctrl |= SDHCI_CTRL_4BITBUS;
+		else
+			ctrl &= ~SDHCI_CTRL_4BITBUS;
+	}
+	writew(tmp, host->ioaddr + SD_CE_ATA_2);
+	writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
+}
+
+static const struct sdhci_ops pxav2_sdhci_ops = {
+	.set_clock     = sdhci_set_clock,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.set_bus_width = pxav2_mmc_set_bus_width,
+	.reset         = pxav2_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_pxav2_of_match[] = {
+	{
+		.compatible = "mrvl,pxav2-mmc",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, sdhci_pxav2_of_match);
+
+static struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev)
+{
+	struct sdhci_pxa_platdata *pdata;
+	struct device_node *np = dev->of_node;
+	u32 bus_width;
+	u32 clk_delay_cycles;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	if (of_find_property(np, "non-removable", NULL))
+		pdata->flags |= PXA_FLAG_CARD_PERMANENT;
+
+	of_property_read_u32(np, "bus-width", &bus_width);
+	if (bus_width == 8)
+		pdata->flags |= PXA_FLAG_SD_8_BIT_CAPABLE_SLOT;
+
+	of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles);
+	if (clk_delay_cycles > 0) {
+		pdata->clk_delay_sel = 1;
+		pdata->clk_delay_cycles = clk_delay_cycles;
+	}
+
+	return pdata;
+}
+#else
+static inline struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
+static int sdhci_pxav2_probe(struct platform_device *pdev)
+{
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct sdhci_host *host = NULL;
+	struct sdhci_pxa *pxa = NULL;
+	const struct of_device_id *match;
+
+	int ret;
+	struct clk *clk;
+
+	pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL);
+	if (!pxa)
+		return -ENOMEM;
+
+	host = sdhci_pltfm_init(pdev, NULL, 0);
+	if (IS_ERR(host)) {
+		kfree(pxa);
+		return PTR_ERR(host);
+	}
+	pltfm_host = sdhci_priv(host);
+	pltfm_host->priv = pxa;
+
+	clk = clk_get(dev, "PXA-SDHCLK");
+	if (IS_ERR(clk)) {
+		dev_err(dev, "failed to get io clock\n");
+		ret = PTR_ERR(clk);
+		goto err_clk_get;
+	}
+	pltfm_host->clk = clk;
+	clk_prepare_enable(clk);
+
+	host->quirks = SDHCI_QUIRK_BROKEN_ADMA
+		| SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
+		| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
+
+	match = of_match_device(of_match_ptr(sdhci_pxav2_of_match), &pdev->dev);
+	if (match) {
+		pdata = pxav2_get_mmc_pdata(dev);
+	}
+	if (pdata) {
+		if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
+			/* on-chip device */
+			host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+			host->mmc->caps |= MMC_CAP_NONREMOVABLE;
+		}
+
+		/* If slot design supports 8 bit data, indicate this to MMC. */
+		if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
+			host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+
+		if (pdata->quirks)
+			host->quirks |= pdata->quirks;
+		if (pdata->host_caps)
+			host->mmc->caps |= pdata->host_caps;
+		if (pdata->pm_caps)
+			host->mmc->pm_caps |= pdata->pm_caps;
+	}
+
+	host->ops = &pxav2_sdhci_ops;
+
+	ret = sdhci_add_host(host);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add host\n");
+		goto err_add_host;
+	}
+
+	platform_set_drvdata(pdev, host);
+
+	return 0;
+
+err_add_host:
+	clk_disable_unprepare(clk);
+	clk_put(clk);
+err_clk_get:
+	sdhci_pltfm_free(pdev);
+	kfree(pxa);
+	return ret;
+}
+
+static int sdhci_pxav2_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = pltfm_host->priv;
+
+	sdhci_remove_host(host, 1);
+
+	clk_disable_unprepare(pltfm_host->clk);
+	clk_put(pltfm_host->clk);
+	sdhci_pltfm_free(pdev);
+	kfree(pxa);
+
+	return 0;
+}
+
+static struct platform_driver sdhci_pxav2_driver = {
+	.driver		= {
+		.name	= "sdhci-pxav2",
+#ifdef CONFIG_OF
+		.of_match_table = sdhci_pxav2_of_match,
+#endif
+		.pm	= SDHCI_PLTFM_PMOPS,
+	},
+	.probe		= sdhci_pxav2_probe,
+	.remove		= sdhci_pxav2_remove,
+};
+
+module_platform_driver(sdhci_pxav2_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for pxav2");
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_LICENSE("GPL v2");
+

drivers/mmc/host/sdhci-pxav3.c

@@ -0,0 +1,541 @@
+/*
+ * Copyright (C) 2010 Marvell International Ltd.
+ *		Zhangfei Gao <zhangfei.gao@marvell.com>
+ *		Kevin Wang <dwang4@marvell.com>
+ *		Mingwei Wang <mwwang@marvell.com>
+ *		Philip Rakity <prakity@marvell.com>
+ *		Mark Brown <markb@marvell.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/platform_data/pxa_sdhci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/mbus.h>
+
+#include "sdhci.h"
+#include "sdhci-pltfm.h"
+
+#define PXAV3_RPM_DELAY_MS     50
+
+#define SD_CLOCK_BURST_SIZE_SETUP		0x10A
+#define SDCLK_SEL	0x100
+#define SDCLK_DELAY_SHIFT	9
+#define SDCLK_DELAY_MASK	0x1f
+
+#define SD_CFG_FIFO_PARAM       0x100
+#define SDCFG_GEN_PAD_CLK_ON	(1<<6)
+#define SDCFG_GEN_PAD_CLK_CNT_MASK	0xFF
+#define SDCFG_GEN_PAD_CLK_CNT_SHIFT	24
+
+#define SD_SPI_MODE          0x108
+#define SD_CE_ATA_1          0x10C
+
+#define SD_CE_ATA_2          0x10E
+#define SDCE_MISC_INT		(1<<2)
+#define SDCE_MISC_INT_EN	(1<<1)
+
+/*
+ * These registers are relative to the second register region, for the
+ * MBus bridge.
+ */
+#define SDHCI_WINDOW_CTRL(i)	(0x80 + ((i) << 3))
+#define SDHCI_WINDOW_BASE(i)	(0x84 + ((i) << 3))
+#define SDHCI_MAX_WIN_NUM	8
+
+static int mv_conf_mbus_windows(struct platform_device *pdev,
+				const struct mbus_dram_target_info *dram)
+{
+	int i;
+	void __iomem *regs;
+	struct resource *res;
+
+	if (!dram) {
+		dev_err(&pdev->dev, "no mbus dram info\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot get mbus registers\n");
+		return -EINVAL;
+	}
+
+	regs = ioremap(res->start, resource_size(res));
+	if (!regs) {
+		dev_err(&pdev->dev, "cannot map mbus registers\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < SDHCI_MAX_WIN_NUM; i++) {
+		writel(0, regs + SDHCI_WINDOW_CTRL(i));
+		writel(0, regs + SDHCI_WINDOW_BASE(i));
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+
+		/* Write size, attributes and target id to control register */
+		writel(((cs->size - 1) & 0xffff0000) |
+			(cs->mbus_attr << 8) |
+			(dram->mbus_dram_target_id << 4) | 1,
+			regs + SDHCI_WINDOW_CTRL(i));
+		/* Write base address to base register */
+		writel(cs->base, regs + SDHCI_WINDOW_BASE(i));
+	}
+
+	iounmap(regs);
+
+	return 0;
+}
+
+static int armada_38x_quirks(struct platform_device *pdev,
+			     struct sdhci_host *host)
+{
+	struct device_node *np = pdev->dev.of_node;
+
+	host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
+	/*
+	 * According to erratum 'FE-2946959' both SDR50 and DDR50
+	 * modes require specific clock adjustments in SDIO3
+	 * Configuration register, if the adjustment is not done,
+	 * remove them from the capabilities.
+	 */
+	host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+	host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50);
+
+	/*
+	 * According to erratum 'ERR-7878951' Armada 38x SDHCI
+	 * controller has different capabilities than the ones shown
+	 * in its registers
+	 */
+	host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+	if (of_property_read_bool(np, "no-1-8-v")) {
+		host->caps &= ~SDHCI_CAN_VDD_180;
+		host->mmc->caps &= ~MMC_CAP_1_8V_DDR;
+	} else {
+		host->caps &= ~SDHCI_CAN_VDD_330;
+	}
+	host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_USE_SDR50_TUNING);
+
+	return 0;
+}
+
+static void pxav3_reset(struct sdhci_host *host, u8 mask)
+{
+	struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
+	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
+
+	sdhci_reset(host, mask);
+
+	if (mask == SDHCI_RESET_ALL) {
+		/*
+		 * tune timing of read data/command when crc error happen
+		 * no performance impact
+		 */
+		if (pdata && 0 != pdata->clk_delay_cycles) {
+			u16 tmp;
+
+			tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
+			tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
+				<< SDCLK_DELAY_SHIFT;
+			tmp |= SDCLK_SEL;
+			writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
+		}
+	}
+}
+
+#define MAX_WAIT_COUNT 5
+static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = pltfm_host->priv;
+	u16 tmp;
+	int count;
+
+	if (pxa->power_mode == MMC_POWER_UP
+			&& power_mode == MMC_POWER_ON) {
+
+		dev_dbg(mmc_dev(host->mmc),
+				"%s: slot->power_mode = %d,"
+				"ios->power_mode = %d\n",
+				__func__,
+				pxa->power_mode,
+				power_mode);
+
+		/* set we want notice of when 74 clocks are sent */
+		tmp = readw(host->ioaddr + SD_CE_ATA_2);
+		tmp |= SDCE_MISC_INT_EN;
+		writew(tmp, host->ioaddr + SD_CE_ATA_2);
+
+		/* start sending the 74 clocks */
+		tmp = readw(host->ioaddr + SD_CFG_FIFO_PARAM);
+		tmp |= SDCFG_GEN_PAD_CLK_ON;
+		writew(tmp, host->ioaddr + SD_CFG_FIFO_PARAM);
+
+		/* slowest speed is about 100KHz or 10usec per clock */
+		udelay(740);
+		count = 0;
+
+		while (count++ < MAX_WAIT_COUNT) {
+			if ((readw(host->ioaddr + SD_CE_ATA_2)
+						& SDCE_MISC_INT) == 0)
+				break;
+			udelay(10);
+		}
+
+		if (count == MAX_WAIT_COUNT)
+			dev_warn(mmc_dev(host->mmc), "74 clock interrupt not cleared\n");
+
+		/* clear the interrupt bit if posted */
+		tmp = readw(host->ioaddr + SD_CE_ATA_2);
+		tmp |= SDCE_MISC_INT;
+		writew(tmp, host->ioaddr + SD_CE_ATA_2);
+	}
+	pxa->power_mode = power_mode;
+}
+
+static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
+{
+	u16 ctrl_2;
+
+	/*
+	 * Set V18_EN -- UHS modes do not work without this.
+	 * does not change signaling voltage
+	 */
+	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+	/* Select Bus Speed Mode for host */
+	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+	switch (uhs) {
+	case MMC_TIMING_UHS_SDR12:
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+		break;
+	case MMC_TIMING_UHS_SDR25:
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+		break;
+	case MMC_TIMING_UHS_SDR50:
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
+		break;
+	case MMC_TIMING_UHS_SDR104:
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
+		break;
+	case MMC_TIMING_UHS_DDR50:
+		ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
+		break;
+	}
+
+	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+	dev_dbg(mmc_dev(host->mmc),
+		"%s uhs = %d, ctrl_2 = %04X\n",
+		__func__, uhs, ctrl_2);
+}
+
+static const struct sdhci_ops pxav3_sdhci_ops = {
+	.set_clock = sdhci_set_clock,
+	.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = pxav3_reset,
+	.set_uhs_signaling = pxav3_set_uhs_signaling,
+};
+
+static struct sdhci_pltfm_data sdhci_pxav3_pdata = {
+	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
+		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
+		| SDHCI_QUIRK_32BIT_ADMA_SIZE
+		| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+	.ops = &pxav3_sdhci_ops,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_pxav3_of_match[] = {
+	{
+		.compatible = "mrvl,pxav3-mmc",
+	},
+	{
+		.compatible = "marvell,armada-380-sdhci",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match);
+
+static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
+{
+	struct sdhci_pxa_platdata *pdata;
+	struct device_node *np = dev->of_node;
+	u32 clk_delay_cycles;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	if (!of_property_read_u32(np, "mrvl,clk-delay-cycles",
+				  &clk_delay_cycles))
+		pdata->clk_delay_cycles = clk_delay_cycles;
+
+	return pdata;
+}
+#else
+static inline struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
+static int sdhci_pxav3_probe(struct platform_device *pdev)
+{
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	struct sdhci_host *host = NULL;
+	struct sdhci_pxa *pxa = NULL;
+	const struct of_device_id *match;
+
+	int ret;
+	struct clk *clk;
+
+	pxa = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_pxa), GFP_KERNEL);
+	if (!pxa)
+		return -ENOMEM;
+
+	host = sdhci_pltfm_init(pdev, &sdhci_pxav3_pdata, 0);
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	/* enable 1/8V DDR capable */
+	host->mmc->caps |= MMC_CAP_1_8V_DDR;
+
+	if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) {
+		ret = armada_38x_quirks(pdev, host);
+		if (ret < 0)
+			goto err_clk_get;
+		ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
+		if (ret < 0)
+			goto err_mbus_win;
+	}
+
+
+	pltfm_host = sdhci_priv(host);
+	pltfm_host->priv = pxa;
+
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(dev, "failed to get io clock\n");
+		ret = PTR_ERR(clk);
+		goto err_clk_get;
+	}
+	pltfm_host->clk = clk;
+	clk_prepare_enable(clk);
+
+	match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev);
+	if (match) {
+		ret = mmc_of_parse(host->mmc);
+		if (ret)
+			goto err_of_parse;
+		sdhci_get_of_property(pdev);
+		pdata = pxav3_get_mmc_pdata(dev);
+	} else if (pdata) {
+		/* on-chip device */
+		if (pdata->flags & PXA_FLAG_CARD_PERMANENT)
+			host->mmc->caps |= MMC_CAP_NONREMOVABLE;
+
+		/* If slot design supports 8 bit data, indicate this to MMC. */
+		if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
+			host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+
+		if (pdata->quirks)
+			host->quirks |= pdata->quirks;
+		if (pdata->quirks2)
+			host->quirks2 |= pdata->quirks2;
+		if (pdata->host_caps)
+			host->mmc->caps |= pdata->host_caps;
+		if (pdata->host_caps2)
+			host->mmc->caps2 |= pdata->host_caps2;
+		if (pdata->pm_caps)
+			host->mmc->pm_caps |= pdata->pm_caps;
+
+		if (gpio_is_valid(pdata->ext_cd_gpio)) {
+			ret = mmc_gpio_request_cd(host->mmc, pdata->ext_cd_gpio,
+						  0);
+			if (ret) {
+				dev_err(mmc_dev(host->mmc),
+					"failed to allocate card detect gpio\n");
+				goto err_cd_req;
+			}
+		}
+	}
+
+	pm_runtime_get_noresume(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, PXAV3_RPM_DELAY_MS);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+	pm_suspend_ignore_children(&pdev->dev, 1);
+
+	ret = sdhci_add_host(host);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add host\n");
+		goto err_add_host;
+	}
+
+	platform_set_drvdata(pdev, host);
+
+	if (host->mmc->pm_caps & MMC_PM_KEEP_POWER) {
+		device_init_wakeup(&pdev->dev, 1);
+		host->mmc->pm_flags |= MMC_PM_WAKE_SDIO_IRQ;
+	} else {
+		device_init_wakeup(&pdev->dev, 0);
+	}
+
+	pm_runtime_put_autosuspend(&pdev->dev);
+
+	return 0;
+
+err_add_host:
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+err_of_parse:
+err_cd_req:
+	clk_disable_unprepare(clk);
+err_clk_get:
+err_mbus_win:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static int sdhci_pxav3_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	pm_runtime_get_sync(&pdev->dev);
+	sdhci_remove_host(host, 1);
+	pm_runtime_disable(&pdev->dev);
+
+	clk_disable_unprepare(pltfm_host->clk);
+
+	sdhci_pltfm_free(pdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_pxav3_suspend(struct device *dev)
+{
+	int ret;
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	ret = sdhci_suspend_host(host);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+static int sdhci_pxav3_resume(struct device *dev)
+{
+	int ret;
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	ret = sdhci_resume_host(host);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+static int sdhci_pxav3_runtime_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	unsigned long flags;
+
+	if (pltfm_host->clk) {
+		spin_lock_irqsave(&host->lock, flags);
+		host->runtime_suspended = true;
+		spin_unlock_irqrestore(&host->lock, flags);
+
+		clk_disable_unprepare(pltfm_host->clk);
+	}
+
+	return 0;
+}
+
+static int sdhci_pxav3_runtime_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	unsigned long flags;
+
+	if (pltfm_host->clk) {
+		clk_prepare_enable(pltfm_host->clk);
+
+		spin_lock_irqsave(&host->lock, flags);
+		host->runtime_suspended = false;
+		spin_unlock_irqrestore(&host->lock, flags);
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM
+static const struct dev_pm_ops sdhci_pxav3_pmops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sdhci_pxav3_suspend, sdhci_pxav3_resume)
+	SET_RUNTIME_PM_OPS(sdhci_pxav3_runtime_suspend,
+		sdhci_pxav3_runtime_resume, NULL)
+};
+
+#define SDHCI_PXAV3_PMOPS (&sdhci_pxav3_pmops)
+
+#else
+#define SDHCI_PXAV3_PMOPS NULL
+#endif
+
+static struct platform_driver sdhci_pxav3_driver = {
+	.driver		= {
+		.name	= "sdhci-pxav3",
+#ifdef CONFIG_OF
+		.of_match_table = sdhci_pxav3_of_match,
+#endif
+		.pm	= SDHCI_PXAV3_PMOPS,
+	},
+	.probe		= sdhci_pxav3_probe,
+	.remove		= sdhci_pxav3_remove,
+};
+
+module_platform_driver(sdhci_pxav3_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for pxav3");
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_LICENSE("GPL v2");
+

drivers/mmc/host/sdhci-s3c-regs.h

@@ -0,0 +1,87 @@
+/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - SDHCI (HSMMC) register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_SDHCI_REGS_H
+#define __PLAT_S3C_SDHCI_REGS_H __FILE__
+
+#define S3C_SDHCI_CONTROL2			(0x80)
+#define S3C_SDHCI_CONTROL3			(0x84)
+#define S3C64XX_SDHCI_CONTROL4			(0x8C)
+
+#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR	(1 << 31)
+#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK		(1 << 30)
+#define S3C_SDHCI_CTRL2_CDINVRXD3		(1 << 29)
+#define S3C_SDHCI_CTRL2_SLCARDOUT		(1 << 28)
+
+#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK		(0xf << 24)
+#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT		(24)
+#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x)		((_x) << 24)
+
+#define S3C_SDHCI_CTRL2_LVLDAT_MASK		(0xff << 16)
+#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT		(16)
+#define S3C_SDHCI_CTRL2_LVLDAT(_x)		((_x) << 16)
+
+#define S3C_SDHCI_CTRL2_ENFBCLKTX		(1 << 15)
+#define S3C_SDHCI_CTRL2_ENFBCLKRX		(1 << 14)
+#define S3C_SDHCI_CTRL2_SDCDSEL			(1 << 13)
+#define S3C_SDHCI_CTRL2_SDSIGPC			(1 << 12)
+#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART	(1 << 11)
+
+#define S3C_SDHCI_CTRL2_DFCNT_MASK		(0x3 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_SHIFT		(9)
+#define S3C_SDHCI_CTRL2_DFCNT_NONE		(0x0 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK		(0x1 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK		(0x2 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK		(0x3 << 9)
+
+#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD		(1 << 8)
+#define S3C_SDHCI_CTRL2_RWAITMODE		(1 << 7)
+#define S3C_SDHCI_CTRL2_DISBUFRD		(1 << 6)
+#define S3C_SDHCI_CTRL2_SELBASECLK_MASK		(0x3 << 4)
+#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT	(4)
+#define S3C_SDHCI_CTRL2_PWRSYNC			(1 << 3)
+#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON		(1 << 1)
+#define S3C_SDHCI_CTRL2_HWINITFIN		(1 << 0)
+
+#define S3C_SDHCI_CTRL3_FCSEL3			(1 << 31)
+#define S3C_SDHCI_CTRL3_FCSEL2			(1 << 23)
+#define S3C_SDHCI_CTRL3_FCSEL1			(1 << 15)
+#define S3C_SDHCI_CTRL3_FCSEL0			(1 << 7)
+
+#define S3C_SDHCI_CTRL3_FIA3_MASK		(0x7f << 24)
+#define S3C_SDHCI_CTRL3_FIA3_SHIFT		(24)
+#define S3C_SDHCI_CTRL3_FIA3(_x)		((_x) << 24)
+
+#define S3C_SDHCI_CTRL3_FIA2_MASK		(0x7f << 16)
+#define S3C_SDHCI_CTRL3_FIA2_SHIFT		(16)
+#define S3C_SDHCI_CTRL3_FIA2(_x)		((_x) << 16)
+
+#define S3C_SDHCI_CTRL3_FIA1_MASK		(0x7f << 8)
+#define S3C_SDHCI_CTRL3_FIA1_SHIFT		(8)
+#define S3C_SDHCI_CTRL3_FIA1(_x)		((_x) << 8)
+
+#define S3C_SDHCI_CTRL3_FIA0_MASK		(0x7f << 0)
+#define S3C_SDHCI_CTRL3_FIA0_SHIFT		(0)
+#define S3C_SDHCI_CTRL3_FIA0(_x)		((_x) << 0)
+
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK	(0x3 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT	(16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA	(0x0 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA	(0x1 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA	(0x2 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA	(0x3 << 16)
+
+#define S3C64XX_SDHCI_CONTROL4_BUSY		(1)
+
+#endif /* __PLAT_S3C_SDHCI_REGS_H */

drivers/mmc/host/sdhci-s3c.c

@@ -0,0 +1,761 @@
+/* linux/drivers/mmc/host/sdhci-s3c.c
+ *
+ * Copyright 2008 Openmoko Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * SDHCI (HSMMC) support for Samsung SoC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/mmc-sdhci-s3c.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mmc/host.h>
+
+#include "sdhci-s3c-regs.h"
+#include "sdhci.h"
+
+#define MAX_BUS_CLK	(4)
+
+/**
+ * struct sdhci_s3c - S3C SDHCI instance
+ * @host: The SDHCI host created
+ * @pdev: The platform device we where created from.
+ * @ioarea: The resource created when we claimed the IO area.
+ * @pdata: The platform data for this controller.
+ * @cur_clk: The index of the current bus clock.
+ * @clk_io: The clock for the internal bus interface.
+ * @clk_bus: The clocks that are available for the SD/MMC bus clock.
+ */
+struct sdhci_s3c {
+	struct sdhci_host	*host;
+	struct platform_device	*pdev;
+	struct resource		*ioarea;
+	struct s3c_sdhci_platdata *pdata;
+	int			cur_clk;
+	int			ext_cd_irq;
+	int			ext_cd_gpio;
+
+	struct clk		*clk_io;
+	struct clk		*clk_bus[MAX_BUS_CLK];
+	unsigned long		clk_rates[MAX_BUS_CLK];
+
+	bool			no_divider;
+};
+
+/**
+ * struct sdhci_s3c_driver_data - S3C SDHCI platform specific driver data
+ * @sdhci_quirks: sdhci host specific quirks.
+ *
+ * Specifies platform specific configuration of sdhci controller.
+ * Note: A structure for driver specific platform data is used for future
+ * expansion of its usage.
+ */
+struct sdhci_s3c_drv_data {
+	unsigned int	sdhci_quirks;
+	bool		no_divider;
+};
+
+static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
+{
+	return sdhci_priv(host);
+}
+
+/**
+ * sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
+ * @host: The SDHCI host instance.
+ *
+ * Callback to return the maximum clock rate acheivable by the controller.
+*/
+static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned long rate, max = 0;
+	int src;
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		rate = ourhost->clk_rates[src];
+		if (rate > max)
+			max = rate;
+	}
+
+	return max;
+}
+
+/**
+ * sdhci_s3c_consider_clock - consider one the bus clocks for current setting
+ * @ourhost: Our SDHCI instance.
+ * @src: The source clock index.
+ * @wanted: The clock frequency wanted.
+ */
+static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
+					     unsigned int src,
+					     unsigned int wanted)
+{
+	unsigned long rate;
+	struct clk *clksrc = ourhost->clk_bus[src];
+	int shift;
+
+	if (IS_ERR(clksrc))
+		return UINT_MAX;
+
+	/*
+	 * If controller uses a non-standard clock division, find the best clock
+	 * speed possible with selected clock source and skip the division.
+	 */
+	if (ourhost->no_divider) {
+		rate = clk_round_rate(clksrc, wanted);
+		return wanted - rate;
+	}
+
+	rate = ourhost->clk_rates[src];
+
+	for (shift = 0; shift <= 8; ++shift) {
+		if ((rate >> shift) <= wanted)
+			break;
+	}
+
+	if (shift > 8) {
+		dev_dbg(&ourhost->pdev->dev,
+			"clk %d: rate %ld, min rate %lu > wanted %u\n",
+			src, rate, rate / 256, wanted);
+		return UINT_MAX;
+	}
+
+	dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
+		src, rate, wanted, rate >> shift);
+
+	return wanted - (rate >> shift);
+}
+
+/**
+ * sdhci_s3c_set_clock - callback on clock change
+ * @host: The SDHCI host being changed
+ * @clock: The clock rate being requested.
+ *
+ * When the card's clock is going to be changed, look at the new frequency
+ * and find the best clock source to go with it.
+*/
+static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned int best = UINT_MAX;
+	unsigned int delta;
+	int best_src = 0;
+	int src;
+	u32 ctrl;
+
+	host->mmc->actual_clock = 0;
+
+	/* don't bother if the clock is going off. */
+	if (clock == 0) {
+		sdhci_set_clock(host, clock);
+		return;
+	}
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		delta = sdhci_s3c_consider_clock(ourhost, src, clock);
+		if (delta < best) {
+			best = delta;
+			best_src = src;
+		}
+	}
+
+	dev_dbg(&ourhost->pdev->dev,
+		"selected source %d, clock %d, delta %d\n",
+		 best_src, clock, best);
+
+	/* select the new clock source */
+	if (ourhost->cur_clk != best_src) {
+		struct clk *clk = ourhost->clk_bus[best_src];
+
+		clk_prepare_enable(clk);
+		if (ourhost->cur_clk >= 0)
+			clk_disable_unprepare(
+					ourhost->clk_bus[ourhost->cur_clk]);
+
+		ourhost->cur_clk = best_src;
+		host->max_clk = ourhost->clk_rates[best_src];
+	}
+
+	/* turn clock off to card before changing clock source */
+	writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+
+	ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+	ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+
+	/* reprogram default hardware configuration */
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
+		host->ioaddr + S3C64XX_SDHCI_CONTROL4);
+
+	ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+	ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+
+	/* reconfigure the controller for new clock rate */
+	ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+	if (clock < 25 * 1000000)
+		ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
+	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
+
+	sdhci_set_clock(host, clock);
+}
+
+/**
+ * sdhci_s3c_get_min_clock - callback to get minimal supported clock value
+ * @host: The SDHCI host being queried
+ *
+ * To init mmc host properly a minimal clock value is needed. For high system
+ * bus clock's values the standard formula gives values out of allowed range.
+ * The clock still can be set to lower values, if clock source other then
+ * system bus is selected.
+*/
+static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned long rate, min = ULONG_MAX;
+	int src;
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		rate = ourhost->clk_rates[src] / 256;
+		if (!rate)
+			continue;
+		if (rate < min)
+			min = rate;
+	}
+
+	return min;
+}
+
+/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
+static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned long rate, max = 0;
+	int src;
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		struct clk *clk;
+
+		clk = ourhost->clk_bus[src];
+		if (IS_ERR(clk))
+			continue;
+
+		rate = clk_round_rate(clk, ULONG_MAX);
+		if (rate > max)
+			max = rate;
+	}
+
+	return max;
+}
+
+/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
+static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned long rate, min = ULONG_MAX;
+	int src;
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		struct clk *clk;
+
+		clk = ourhost->clk_bus[src];
+		if (IS_ERR(clk))
+			continue;
+
+		rate = clk_round_rate(clk, 0);
+		if (rate < min)
+			min = rate;
+	}
+
+	return min;
+}
+
+/* sdhci_cmu_set_clock - callback on clock change.*/
+static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	struct device *dev = &ourhost->pdev->dev;
+	unsigned long timeout;
+	u16 clk = 0;
+
+	host->mmc->actual_clock = 0;
+
+	/* If the clock is going off, set to 0 at clock control register */
+	if (clock == 0) {
+		sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+		return;
+	}
+
+	sdhci_s3c_set_clock(host, clock);
+
+	clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
+
+	clk = SDHCI_CLOCK_INT_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+	/* Wait max 20 ms */
+	timeout = 20;
+	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+		& SDHCI_CLOCK_INT_STABLE)) {
+		if (timeout == 0) {
+			dev_err(dev, "%s: Internal clock never stabilised.\n",
+				mmc_hostname(host->mmc));
+			return;
+		}
+		timeout--;
+		mdelay(1);
+	}
+
+	clk |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+}
+
+/**
+ * sdhci_s3c_set_bus_width - support 8bit buswidth
+ * @host: The SDHCI host being queried
+ * @width: MMC_BUS_WIDTH_ macro for the bus width being requested
+ *
+ * We have 8-bit width support but is not a v3 controller.
+ * So we add platform_bus_width() and support 8bit width.
+ */
+static void sdhci_s3c_set_bus_width(struct sdhci_host *host, int width)
+{
+	u8 ctrl;
+
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+
+	switch (width) {
+	case MMC_BUS_WIDTH_8:
+		ctrl |= SDHCI_CTRL_8BITBUS;
+		ctrl &= ~SDHCI_CTRL_4BITBUS;
+		break;
+	case MMC_BUS_WIDTH_4:
+		ctrl |= SDHCI_CTRL_4BITBUS;
+		ctrl &= ~SDHCI_CTRL_8BITBUS;
+		break;
+	default:
+		ctrl &= ~SDHCI_CTRL_4BITBUS;
+		ctrl &= ~SDHCI_CTRL_8BITBUS;
+		break;
+	}
+
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
+static struct sdhci_ops sdhci_s3c_ops = {
+	.get_max_clock		= sdhci_s3c_get_max_clk,
+	.set_clock		= sdhci_s3c_set_clock,
+	.get_min_clock		= sdhci_s3c_get_min_clock,
+	.set_bus_width		= sdhci_s3c_set_bus_width,
+	.reset			= sdhci_reset,
+	.set_uhs_signaling	= sdhci_set_uhs_signaling,
+};
+
+#ifdef CONFIG_OF
+static int sdhci_s3c_parse_dt(struct device *dev,
+		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+	struct device_node *node = dev->of_node;
+	u32 max_width;
+
+	/* if the bus-width property is not specified, assume width as 1 */
+	if (of_property_read_u32(node, "bus-width", &max_width))
+		max_width = 1;
+	pdata->max_width = max_width;
+
+	/* get the card detection method */
+	if (of_get_property(node, "broken-cd", NULL)) {
+		pdata->cd_type = S3C_SDHCI_CD_NONE;
+		return 0;
+	}
+
+	if (of_get_property(node, "non-removable", NULL)) {
+		pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
+		return 0;
+	}
+
+	if (of_get_named_gpio(node, "cd-gpios", 0))
+		return 0;
+
+	/* assuming internal card detect that will be configured by pinctrl */
+	pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
+	return 0;
+}
+#else
+static int sdhci_s3c_parse_dt(struct device *dev,
+		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+	return -EINVAL;
+}
+#endif
+
+static const struct of_device_id sdhci_s3c_dt_match[];
+
+static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
+			struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(sdhci_s3c_dt_match, pdev->dev.of_node);
+		return (struct sdhci_s3c_drv_data *)match->data;
+	}
+#endif
+	return (struct sdhci_s3c_drv_data *)
+			platform_get_device_id(pdev)->driver_data;
+}
+
+static int sdhci_s3c_probe(struct platform_device *pdev)
+{
+	struct s3c_sdhci_platdata *pdata;
+	struct sdhci_s3c_drv_data *drv_data;
+	struct device *dev = &pdev->dev;
+	struct sdhci_host *host;
+	struct sdhci_s3c *sc;
+	struct resource *res;
+	int ret, irq, ptr, clks;
+
+	if (!pdev->dev.platform_data && !pdev->dev.of_node) {
+		dev_err(dev, "no device data specified\n");
+		return -ENOENT;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "no irq specified\n");
+		return irq;
+	}
+
+	host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
+	if (IS_ERR(host)) {
+		dev_err(dev, "sdhci_alloc_host() failed\n");
+		return PTR_ERR(host);
+	}
+	sc = sdhci_priv(host);
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		ret = -ENOMEM;
+		goto err_pdata_io_clk;
+	}
+
+	if (pdev->dev.of_node) {
+		ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
+		if (ret)
+			goto err_pdata_io_clk;
+	} else {
+		memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
+		sc->ext_cd_gpio = -1; /* invalid gpio number */
+	}
+
+	drv_data = sdhci_s3c_get_driver_data(pdev);
+
+	sc->host = host;
+	sc->pdev = pdev;
+	sc->pdata = pdata;
+	sc->cur_clk = -1;
+
+	platform_set_drvdata(pdev, host);
+
+	sc->clk_io = devm_clk_get(dev, "hsmmc");
+	if (IS_ERR(sc->clk_io)) {
+		dev_err(dev, "failed to get io clock\n");
+		ret = PTR_ERR(sc->clk_io);
+		goto err_pdata_io_clk;
+	}
+
+	/* enable the local io clock and keep it running for the moment. */
+	clk_prepare_enable(sc->clk_io);
+
+	for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
+		char name[14];
+
+		snprintf(name, 14, "mmc_busclk.%d", ptr);
+		sc->clk_bus[ptr] = devm_clk_get(dev, name);
+		if (IS_ERR(sc->clk_bus[ptr]))
+			continue;
+
+		clks++;
+		sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]);
+
+		dev_info(dev, "clock source %d: %s (%ld Hz)\n",
+				ptr, name, sc->clk_rates[ptr]);
+	}
+
+	if (clks == 0) {
+		dev_err(dev, "failed to find any bus clocks\n");
+		ret = -ENOENT;
+		goto err_no_busclks;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(host->ioaddr)) {
+		ret = PTR_ERR(host->ioaddr);
+		goto err_req_regs;
+	}
+
+	/* Ensure we have minimal gpio selected CMD/CLK/Detect */
+	if (pdata->cfg_gpio)
+		pdata->cfg_gpio(pdev, pdata->max_width);
+
+	host->hw_name = "samsung-hsmmc";
+	host->ops = &sdhci_s3c_ops;
+	host->quirks = 0;
+	host->quirks2 = 0;
+	host->irq = irq;
+
+	/* Setup quirks for the controller */
+	host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
+	host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
+	if (drv_data) {
+		host->quirks |= drv_data->sdhci_quirks;
+		sc->no_divider = drv_data->no_divider;
+	}
+
+#ifndef CONFIG_MMC_SDHCI_S3C_DMA
+
+	/* we currently see overruns on errors, so disable the SDMA
+	 * support as well. */
+	host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+
+#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
+
+	/* It seems we do not get an DATA transfer complete on non-busy
+	 * transfers, not sure if this is a problem with this specific
+	 * SDHCI block, or a missing configuration that needs to be set. */
+	host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
+
+	/* This host supports the Auto CMD12 */
+	host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+
+	/* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
+	host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
+
+	if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
+	    pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
+		host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+	if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
+		host->mmc->caps = MMC_CAP_NONREMOVABLE;
+
+	switch (pdata->max_width) {
+	case 8:
+		host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+	case 4:
+		host->mmc->caps |= MMC_CAP_4_BIT_DATA;
+		break;
+	}
+
+	if (pdata->pm_caps)
+		host->mmc->pm_caps |= pdata->pm_caps;
+
+	host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
+			 SDHCI_QUIRK_32BIT_DMA_SIZE);
+
+	/* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
+	host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
+
+	/*
+	 * If controller does not have internal clock divider,
+	 * we can use overriding functions instead of default.
+	 */
+	if (sc->no_divider) {
+		sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
+		sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
+		sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
+	}
+
+	/* It supports additional host capabilities if needed */
+	if (pdata->host_caps)
+		host->mmc->caps |= pdata->host_caps;
+
+	if (pdata->host_caps2)
+		host->mmc->caps2 |= pdata->host_caps2;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_suspend_ignore_children(&pdev->dev, 1);
+
+	mmc_of_parse(host->mmc);
+
+	ret = sdhci_add_host(host);
+	if (ret) {
+		dev_err(dev, "sdhci_add_host() failed\n");
+		goto err_req_regs;
+	}
+
+#ifdef CONFIG_PM_RUNTIME
+	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
+		clk_disable_unprepare(sc->clk_io);
+#endif
+	return 0;
+
+ err_req_regs:
+	pm_runtime_disable(&pdev->dev);
+
+ err_no_busclks:
+	clk_disable_unprepare(sc->clk_io);
+
+ err_pdata_io_clk:
+	sdhci_free_host(host);
+
+	return ret;
+}
+
+static int sdhci_s3c_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host =  platform_get_drvdata(pdev);
+	struct sdhci_s3c *sc = sdhci_priv(host);
+
+	if (sc->ext_cd_irq)
+		free_irq(sc->ext_cd_irq, sc);
+
+#ifdef CONFIG_PM_RUNTIME
+	if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
+		clk_prepare_enable(sc->clk_io);
+#endif
+	sdhci_remove_host(host, 1);
+
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	clk_disable_unprepare(sc->clk_io);
+
+	sdhci_free_host(host);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_s3c_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	return sdhci_suspend_host(host);
+}
+
+static int sdhci_s3c_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	return sdhci_resume_host(host);
+}
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+static int sdhci_s3c_runtime_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	struct clk *busclk = ourhost->clk_io;
+	int ret;
+
+	ret = sdhci_runtime_suspend_host(host);
+
+	if (ourhost->cur_clk >= 0)
+		clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
+	clk_disable_unprepare(busclk);
+	return ret;
+}
+
+static int sdhci_s3c_runtime_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	struct clk *busclk = ourhost->clk_io;
+	int ret;
+
+	clk_prepare_enable(busclk);
+	if (ourhost->cur_clk >= 0)
+		clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
+	ret = sdhci_runtime_resume_host(host);
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_PM
+static const struct dev_pm_ops sdhci_s3c_pmops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
+	SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
+			   NULL)
+};
+
+#define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops)
+
+#else
+#define SDHCI_S3C_PMOPS NULL
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212)
+static struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
+	.no_divider = true,
+};
+#define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)&exynos4_sdhci_drv_data)
+#else
+#define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)NULL)
+#endif
+
+static struct platform_device_id sdhci_s3c_driver_ids[] = {
+	{
+		.name		= "s3c-sdhci",
+		.driver_data	= (kernel_ulong_t)NULL,
+	}, {
+		.name		= "exynos4-sdhci",
+		.driver_data	= EXYNOS4_SDHCI_DRV_DATA,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_s3c_dt_match[] = {
+	{ .compatible = "samsung,s3c6410-sdhci", },
+	{ .compatible = "samsung,exynos4210-sdhci",
+		.data = (void *)EXYNOS4_SDHCI_DRV_DATA },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
+#endif
+
+static struct platform_driver sdhci_s3c_driver = {
+	.probe		= sdhci_s3c_probe,
+	.remove		= sdhci_s3c_remove,
+	.id_table	= sdhci_s3c_driver_ids,
+	.driver		= {
+		.name	= "s3c-sdhci",
+		.of_match_table = of_match_ptr(sdhci_s3c_dt_match),
+		.pm	= SDHCI_S3C_PMOPS,
+	},
+};
+
+module_platform_driver(sdhci_s3c_driver);
+
+MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c-sdhci");

drivers/mmc/host/sdhci-sirf.c

@@ -0,0 +1,206 @@
+/*
+ * SDHCI support for SiRF primaII and marco SoCs
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/mmc/slot-gpio.h>
+#include "sdhci-pltfm.h"
+
+#define SDHCI_SIRF_8BITBUS BIT(3)
+
+struct sdhci_sirf_priv {
+	struct clk *clk;
+	int gpio_cd;
+};
+
+static unsigned int sdhci_sirf_get_max_clk(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_sirf_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	return clk_get_rate(priv->clk);
+}
+
+static void sdhci_sirf_set_bus_width(struct sdhci_host *host, int width)
+{
+	u8 ctrl;
+
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+	ctrl &= ~(SDHCI_CTRL_4BITBUS | SDHCI_SIRF_8BITBUS);
+
+	/*
+	 * CSR atlas7 and prima2 SD host version is not 3.0
+	 * 8bit-width enable bit of CSR SD hosts is 3,
+	 * while stardard hosts use bit 5
+	 */
+	if (width == MMC_BUS_WIDTH_8)
+		ctrl |= SDHCI_SIRF_8BITBUS;
+	else if (width == MMC_BUS_WIDTH_4)
+		ctrl |= SDHCI_CTRL_4BITBUS;
+
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
+static struct sdhci_ops sdhci_sirf_ops = {
+	.set_clock = sdhci_set_clock,
+	.get_max_clock	= sdhci_sirf_get_max_clk,
+	.set_bus_width = sdhci_sirf_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static struct sdhci_pltfm_data sdhci_sirf_pdata = {
+	.ops = &sdhci_sirf_ops,
+	.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
+		SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+		SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+		SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
+		SDHCI_QUIRK_DELAY_AFTER_POWER,
+};
+
+static int sdhci_sirf_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_sirf_priv *priv;
+	struct clk *clk;
+	int gpio_cd;
+	int ret;
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "unable to get clock");
+		return PTR_ERR(clk);
+	}
+
+	if (pdev->dev.of_node)
+		gpio_cd = of_get_named_gpio(pdev->dev.of_node, "cd-gpios", 0);
+	else
+		gpio_cd = -EINVAL;
+
+	host = sdhci_pltfm_init(pdev, &sdhci_sirf_pdata, sizeof(struct sdhci_sirf_priv));
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	pltfm_host = sdhci_priv(host);
+	priv = sdhci_pltfm_priv(pltfm_host);
+	priv->clk = clk;
+	priv->gpio_cd = gpio_cd;
+
+	sdhci_get_of_property(pdev);
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		goto err_clk_prepare;
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_sdhci_add;
+
+	/*
+	 * We must request the IRQ after sdhci_add_host(), as the tasklet only
+	 * gets setup in sdhci_add_host() and we oops.
+	 */
+	if (gpio_is_valid(priv->gpio_cd)) {
+		ret = mmc_gpio_request_cd(host->mmc, priv->gpio_cd, 0);
+		if (ret) {
+			dev_err(&pdev->dev, "card detect irq request failed: %d\n",
+				ret);
+			goto err_request_cd;
+		}
+		mmc_gpiod_request_cd_irq(host->mmc);
+	}
+
+	return 0;
+
+err_request_cd:
+	sdhci_remove_host(host, 0);
+err_sdhci_add:
+	clk_disable_unprepare(priv->clk);
+err_clk_prepare:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static int sdhci_sirf_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_sirf_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+	sdhci_pltfm_unregister(pdev);
+
+	if (gpio_is_valid(priv->gpio_cd))
+		mmc_gpio_free_cd(host->mmc);
+
+	clk_disable_unprepare(priv->clk);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_sirf_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_sirf_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int ret;
+
+	ret = sdhci_suspend_host(host);
+	if (ret)
+		return ret;
+
+	clk_disable(priv->clk);
+
+	return 0;
+}
+
+static int sdhci_sirf_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_sirf_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	int ret;
+
+	ret = clk_enable(priv->clk);
+	if (ret) {
+		dev_dbg(dev, "Resume: Error enabling clock\n");
+		return ret;
+	}
+
+	return sdhci_resume_host(host);
+}
+
+static SIMPLE_DEV_PM_OPS(sdhci_sirf_pm_ops, sdhci_sirf_suspend, sdhci_sirf_resume);
+#endif
+
+static const struct of_device_id sdhci_sirf_of_match[] = {
+	{ .compatible = "sirf,prima2-sdhc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_sirf_of_match);
+
+static struct platform_driver sdhci_sirf_driver = {
+	.driver		= {
+		.name	= "sdhci-sirf",
+		.of_match_table = sdhci_sirf_of_match,
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &sdhci_sirf_pm_ops,
+#endif
+	},
+	.probe		= sdhci_sirf_probe,
+	.remove		= sdhci_sirf_remove,
+};
+
+module_platform_driver(sdhci_sirf_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for SiRFprimaII/SiRFmarco");
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_LICENSE("GPL v2");