Fixed MTP to work with TWRP

drivers/mmc/host/sdhci-of-esdhc.c

@@ -0,0 +1,403 @@
+/*
+ * Freescale eSDHC controller driver.
+ *
+ * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ *
+ * Authors: Xiaobo Xie <X.Xie@freescale.com>
+ *	    Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mmc/host.h>
+#include "sdhci-pltfm.h"
+#include "sdhci-esdhc.h"
+
+#define VENDOR_V_22	0x12
+#define VENDOR_V_23	0x13
+static u32 esdhc_readl(struct sdhci_host *host, int reg)
+{
+	u32 ret;
+
+	ret = in_be32(host->ioaddr + reg);
+	/*
+	 * The bit of ADMA flag in eSDHC is not compatible with standard
+	 * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
+	 * supported by eSDHC.
+	 * And for many FSL eSDHC controller, the reset value of field
+	 * SDHCI_CAN_DO_ADMA1 is one, but some of them can't support ADMA,
+	 * only these vendor version is greater than 2.2/0x12 support ADMA.
+	 * For FSL eSDHC, must aligned 4-byte, so use 0xFC to read the
+	 * the verdor version number, oxFE is SDHCI_HOST_VERSION.
+	 */
+	if ((reg == SDHCI_CAPABILITIES) && (ret & SDHCI_CAN_DO_ADMA1)) {
+		u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+		tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+		if (tmp > VENDOR_V_22)
+			ret |= SDHCI_CAN_DO_ADMA2;
+	}
+
+	return ret;
+}
+
+static u16 esdhc_readw(struct sdhci_host *host, int reg)
+{
+	u16 ret;
+	int base = reg & ~0x3;
+	int shift = (reg & 0x2) * 8;
+
+	if (unlikely(reg == SDHCI_HOST_VERSION))
+		ret = in_be32(host->ioaddr + base) & 0xffff;
+	else
+		ret = (in_be32(host->ioaddr + base) >> shift) & 0xffff;
+	return ret;
+}
+
+static u8 esdhc_readb(struct sdhci_host *host, int reg)
+{
+	int base = reg & ~0x3;
+	int shift = (reg & 0x3) * 8;
+	u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
+
+	/*
+	 * "DMA select" locates at offset 0x28 in SD specification, but on
+	 * P5020 or P3041, it locates at 0x29.
+	 */
+	if (reg == SDHCI_HOST_CONTROL) {
+		u32 dma_bits;
+
+		dma_bits = in_be32(host->ioaddr + reg);
+		/* DMA select is 22,23 bits in Protocol Control Register */
+		dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK;
+
+		/* fixup the result */
+		ret &= ~SDHCI_CTRL_DMA_MASK;
+		ret |= dma_bits;
+	}
+
+	return ret;
+}
+
+static void esdhc_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	/*
+	 * Enable IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
+	 * when SYSCTL[RSTD]) is set for some special operations.
+	 * No any impact other operation.
+	 */
+	if (reg == SDHCI_INT_ENABLE)
+		val |= SDHCI_INT_BLK_GAP;
+	sdhci_be32bs_writel(host, val, reg);
+}
+
+static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	if (reg == SDHCI_BLOCK_SIZE) {
+		/*
+		 * Two last DMA bits are reserved, and first one is used for
+		 * non-standard blksz of 4096 bytes that we don't support
+		 * yet. So clear the DMA boundary bits.
+		 */
+		val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
+	}
+	sdhci_be32bs_writew(host, val, reg);
+}
+
+static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	/*
+	 * "DMA select" location is offset 0x28 in SD specification, but on
+	 * P5020 or P3041, it's located at 0x29.
+	 */
+	if (reg == SDHCI_HOST_CONTROL) {
+		u32 dma_bits;
+
+		/*
+		 * If host control register is not standard, exit
+		 * this function
+		 */
+		if (host->quirks2 & SDHCI_QUIRK2_BROKEN_HOST_CONTROL)
+			return;
+
+		/* DMA select is 22,23 bits in Protocol Control Register */
+		dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5;
+		clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5,
+			dma_bits);
+		val &= ~SDHCI_CTRL_DMA_MASK;
+		val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK;
+	}
+
+	/* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
+	if (reg == SDHCI_HOST_CONTROL)
+		val &= ~ESDHC_HOST_CONTROL_RES;
+	sdhci_be32bs_writeb(host, val, reg);
+}
+
+/*
+ * For Abort or Suspend after Stop at Block Gap, ignore the ADMA
+ * error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC])
+ * and Block Gap Event(IRQSTAT[BGE]) are also set.
+ * For Continue, apply soft reset for data(SYSCTL[RSTD]);
+ * and re-issue the entire read transaction from beginning.
+ */
+static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask)
+{
+	u32 tmp;
+	bool applicable;
+	dma_addr_t dmastart;
+	dma_addr_t dmanow;
+
+	tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+	tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+
+	applicable = (intmask & SDHCI_INT_DATA_END) &&
+		(intmask & SDHCI_INT_BLK_GAP) &&
+		(tmp == VENDOR_V_23);
+	if (!applicable)
+		return;
+
+	host->data->error = 0;
+	dmastart = sg_dma_address(host->data->sg);
+	dmanow = dmastart + host->data->bytes_xfered;
+	/*
+	 * Force update to the next DMA block boundary.
+	 */
+	dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
+		SDHCI_DEFAULT_BOUNDARY_SIZE;
+	host->data->bytes_xfered = dmanow - dmastart;
+	sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+}
+
+static int esdhc_of_enable_dma(struct sdhci_host *host)
+{
+	setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
+	return 0;
+}
+
+static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return pltfm_host->clock;
+}
+
+static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return pltfm_host->clock / 256 / 16;
+}
+
+static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	int pre_div = 2;
+	int div = 1;
+	u32 temp;
+
+	host->mmc->actual_clock = 0;
+
+	if (clock == 0)
+		return;
+
+	/* Workaround to reduce the clock frequency for p1010 esdhc */
+	if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
+		if (clock > 20000000)
+			clock -= 5000000;
+		if (clock > 40000000)
+			clock -= 5000000;
+	}
+
+	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+	temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
+		| ESDHC_CLOCK_MASK);
+	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+
+	while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
+		pre_div *= 2;
+
+	while (host->max_clk / pre_div / div > clock && div < 16)
+		div++;
+
+	dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
+		clock, host->max_clk / pre_div / div);
+
+	pre_div >>= 1;
+	div--;
+
+	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+	temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
+		| (div << ESDHC_DIVIDER_SHIFT)
+		| (pre_div << ESDHC_PREDIV_SHIFT));
+	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+	mdelay(1);
+}
+
+static void esdhc_of_platform_init(struct sdhci_host *host)
+{
+	u32 vvn;
+
+	vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+	vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+	if (vvn == VENDOR_V_22)
+		host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
+
+	if (vvn > VENDOR_V_22)
+		host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
+}
+
+static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
+{
+	u32 ctrl;
+
+	switch (width) {
+	case MMC_BUS_WIDTH_8:
+		ctrl = ESDHC_CTRL_8BITBUS;
+		break;
+
+	case MMC_BUS_WIDTH_4:
+		ctrl = ESDHC_CTRL_4BITBUS;
+		break;
+
+	default:
+		ctrl = 0;
+		break;
+	}
+
+	clrsetbits_be32(host->ioaddr + SDHCI_HOST_CONTROL,
+			ESDHC_CTRL_BUSWIDTH_MASK, ctrl);
+}
+
+static const struct sdhci_ops sdhci_esdhc_ops = {
+	.read_l = esdhc_readl,
+	.read_w = esdhc_readw,
+	.read_b = esdhc_readb,
+	.write_l = esdhc_writel,
+	.write_w = esdhc_writew,
+	.write_b = esdhc_writeb,
+	.set_clock = esdhc_of_set_clock,
+	.enable_dma = esdhc_of_enable_dma,
+	.get_max_clock = esdhc_of_get_max_clock,
+	.get_min_clock = esdhc_of_get_min_clock,
+	.platform_init = esdhc_of_platform_init,
+	.adma_workaround = esdhci_of_adma_workaround,
+	.set_bus_width = esdhc_pltfm_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+#ifdef CONFIG_PM
+
+static u32 esdhc_proctl;
+static int esdhc_of_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	esdhc_proctl = sdhci_be32bs_readl(host, SDHCI_HOST_CONTROL);
+
+	return sdhci_suspend_host(host);
+}
+
+static int esdhc_of_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	int ret = sdhci_resume_host(host);
+
+	if (ret == 0) {
+		/* Isn't this already done by sdhci_resume_host() ? --rmk */
+		esdhc_of_enable_dma(host);
+		sdhci_be32bs_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
+	}
+
+	return ret;
+}
+
+static const struct dev_pm_ops esdhc_pmops = {
+	.suspend	= esdhc_of_suspend,
+	.resume		= esdhc_of_resume,
+};
+#define ESDHC_PMOPS (&esdhc_pmops)
+#else
+#define ESDHC_PMOPS NULL
+#endif
+
+static const struct sdhci_pltfm_data sdhci_esdhc_pdata = {
+	/*
+	 * card detection could be handled via GPIO
+	 * eSDHC cannot support End Attribute in NOP ADMA descriptor
+	 */
+	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
+		| SDHCI_QUIRK_NO_CARD_NO_RESET
+		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+	.ops = &sdhci_esdhc_ops,
+};
+
+static int sdhci_esdhc_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct device_node *np;
+	int ret;
+
+	host = sdhci_pltfm_init(pdev, &sdhci_esdhc_pdata, 0);
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	sdhci_get_of_property(pdev);
+
+	np = pdev->dev.of_node;
+	if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
+		/*
+		 * Freescale messed up with P2020 as it has a non-standard
+		 * host control register
+		 */
+		host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL;
+	}
+
+	/* call to generic mmc_of_parse to support additional capabilities */
+	mmc_of_parse(host->mmc);
+	mmc_of_parse_voltage(np, &host->ocr_mask);
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		sdhci_pltfm_free(pdev);
+
+	return ret;
+}
+
+static int sdhci_esdhc_remove(struct platform_device *pdev)
+{
+	return sdhci_pltfm_unregister(pdev);
+}
+
+static const struct of_device_id sdhci_esdhc_of_match[] = {
+	{ .compatible = "fsl,mpc8379-esdhc" },
+	{ .compatible = "fsl,mpc8536-esdhc" },
+	{ .compatible = "fsl,esdhc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
+
+static struct platform_driver sdhci_esdhc_driver = {
+	.driver = {
+		.name = "sdhci-esdhc",
+		.of_match_table = sdhci_esdhc_of_match,
+		.pm = ESDHC_PMOPS,
+	},
+	.probe = sdhci_esdhc_probe,
+	.remove = sdhci_esdhc_remove,
+};
+
+module_platform_driver(sdhci_esdhc_driver);
+
+MODULE_DESCRIPTION("SDHCI OF driver for Freescale MPC eSDHC");
+MODULE_AUTHOR("Xiaobo Xie <X.Xie@freescale.com>, "
+	      "Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL v2");