Fixed MTP to work with TWRP

drivers/net/ethernet/intel/ixgbevf/vf.c

@@ -0,0 +1,619 @@
+/*******************************************************************************
+
+  Intel 82599 Virtual Function driver
+  Copyright(c) 1999 - 2012 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "vf.h"
+#include "ixgbevf.h"
+
+/**
+ *  ixgbevf_start_hw_vf - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware by filling the bus info structure and media type, clears
+ *  all on chip counters, initializes receive address registers, multicast
+ *  table, VLAN filter table, calls routine to set up link and flow control
+ *  settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+static s32 ixgbevf_start_hw_vf(struct ixgbe_hw *hw)
+{
+	/* Clear adapter stopped flag */
+	hw->adapter_stopped = false;
+
+	return 0;
+}
+
+/**
+ *  ixgbevf_init_hw_vf - virtual function hardware initialization
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the hardware by resetting the hardware and then starting
+ *  the hardware
+ **/
+static s32 ixgbevf_init_hw_vf(struct ixgbe_hw *hw)
+{
+	s32 status = hw->mac.ops.start_hw(hw);
+
+	hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
+
+	return status;
+}
+
+/**
+ *  ixgbevf_reset_hw_vf - Performs hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by reseting the transmit and receive units, masks and
+ *  clears all interrupts.
+ **/
+static s32 ixgbevf_reset_hw_vf(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 timeout = IXGBE_VF_INIT_TIMEOUT;
+	s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR;
+	u32 msgbuf[IXGBE_VF_PERMADDR_MSG_LEN];
+	u8 *addr = (u8 *)(&msgbuf[1]);
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	hw->mac.ops.stop_adapter(hw);
+
+	/* reset the api version */
+	hw->api_version = ixgbe_mbox_api_10;
+
+	IXGBE_WRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* we cannot reset while the RSTI / RSTD bits are asserted */
+	while (!mbx->ops.check_for_rst(hw) && timeout) {
+		timeout--;
+		udelay(5);
+	}
+
+	if (!timeout)
+		return IXGBE_ERR_RESET_FAILED;
+
+	/* mailbox timeout can now become active */
+	mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT;
+
+	msgbuf[0] = IXGBE_VF_RESET;
+	mbx->ops.write_posted(hw, msgbuf, 1);
+
+	mdelay(10);
+
+	/* set our "perm_addr" based on info provided by PF */
+	/* also set up the mc_filter_type which is piggy backed
+	 * on the mac address in word 3 */
+	ret_val = mbx->ops.read_posted(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN);
+	if (ret_val)
+		return ret_val;
+
+	/* New versions of the PF may NACK the reset return message
+	 * to indicate that no MAC address has yet been assigned for
+	 * the VF.
+	 */
+	if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK) &&
+	    msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_NACK))
+		return IXGBE_ERR_INVALID_MAC_ADDR;
+
+	memcpy(hw->mac.perm_addr, addr, ETH_ALEN);
+	hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
+
+	return 0;
+}
+
+/**
+ *  ixgbevf_stop_hw_vf - Generic stop Tx/Rx units
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ *  disables transmit and receive units. The adapter_stopped flag is used by
+ *  the shared code and drivers to determine if the adapter is in a stopped
+ *  state and should not touch the hardware.
+ **/
+static s32 ixgbevf_stop_hw_vf(struct ixgbe_hw *hw)
+{
+	u32 number_of_queues;
+	u32 reg_val;
+	u16 i;
+
+	/*
+	 * Set the adapter_stopped flag so other driver functions stop touching
+	 * the hardware
+	 */
+	hw->adapter_stopped = true;
+
+	/* Disable the receive unit by stopped each queue */
+	number_of_queues = hw->mac.max_rx_queues;
+	for (i = 0; i < number_of_queues; i++) {
+		reg_val = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
+		if (reg_val & IXGBE_RXDCTL_ENABLE) {
+			reg_val &= ~IXGBE_RXDCTL_ENABLE;
+			IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val);
+		}
+	}
+
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Clear interrupt mask to stop from interrupts being generated */
+	IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK);
+
+	/* Clear any pending interrupts */
+	IXGBE_READ_REG(hw, IXGBE_VTEICR);
+
+	/* Disable the transmit unit.  Each queue must be disabled. */
+	number_of_queues = hw->mac.max_tx_queues;
+	for (i = 0; i < number_of_queues; i++) {
+		reg_val = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
+		if (reg_val & IXGBE_TXDCTL_ENABLE) {
+			reg_val &= ~IXGBE_TXDCTL_ENABLE;
+			IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), reg_val);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbevf_mta_vector - Determines bit-vector in multicast table to set
+ *  @hw: pointer to hardware structure
+ *  @mc_addr: the multicast address
+ *
+ *  Extracts the 12 bits, from a multicast address, to determine which
+ *  bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ *  incoming rx multicast addresses, to determine the bit-vector to check in
+ *  the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ *  by the MO field of the MCSTCTRL. The MO field is set during initialization
+ *  to mc_filter_type.
+ **/
+static s32 ixgbevf_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+	u32 vector = 0;
+
+	switch (hw->mac.mc_filter_type) {
+	case 0:   /* use bits [47:36] of the address */
+		vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+		break;
+	case 1:   /* use bits [46:35] of the address */
+		vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+		break;
+	case 2:   /* use bits [45:34] of the address */
+		vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+		break;
+	case 3:   /* use bits [43:32] of the address */
+		vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+		break;
+	default:  /* Invalid mc_filter_type */
+		break;
+	}
+
+	/* vector can only be 12-bits or boundary will be exceeded */
+	vector &= 0xFFF;
+	return vector;
+}
+
+/**
+ *  ixgbevf_get_mac_addr_vf - Read device MAC address
+ *  @hw: pointer to the HW structure
+ *  @mac_addr: pointer to storage for retrieved MAC address
+ **/
+static s32 ixgbevf_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+	memcpy(mac_addr, hw->mac.perm_addr, ETH_ALEN);
+
+	return 0;
+}
+
+static s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 msgbuf[3];
+	u8 *msg_addr = (u8 *)(&msgbuf[1]);
+	s32 ret_val;
+
+	memset(msgbuf, 0, sizeof(msgbuf));
+	/*
+	 * If index is one then this is the start of a new list and needs
+	 * indication to the PF so it can do it's own list management.
+	 * If it is zero then that tells the PF to just clear all of
+	 * this VF's macvlans and there is no new list.
+	 */
+	msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT;
+	msgbuf[0] |= IXGBE_VF_SET_MACVLAN;
+	if (addr)
+		memcpy(msg_addr, addr, ETH_ALEN);
+	ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
+
+	if (!ret_val)
+		ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+
+	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+	if (!ret_val)
+		if (msgbuf[0] ==
+		    (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK))
+			ret_val = -ENOMEM;
+
+	return ret_val;
+}
+
+/**
+ *  ixgbevf_set_rar_vf - set device MAC address
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *  @addr: Address to put into receive address register
+ *  @vmdq: Unused in this implementation
+ **/
+static s32 ixgbevf_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr,
+			      u32 vmdq)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 msgbuf[3];
+	u8 *msg_addr = (u8 *)(&msgbuf[1]);
+	s32 ret_val;
+
+	memset(msgbuf, 0, sizeof(msgbuf));
+	msgbuf[0] = IXGBE_VF_SET_MAC_ADDR;
+	memcpy(msg_addr, addr, ETH_ALEN);
+	ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
+
+	if (!ret_val)
+		ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+
+	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+	/* if nacked the address was rejected, use "perm_addr" */
+	if (!ret_val &&
+	    (msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK)))
+		ixgbevf_get_mac_addr_vf(hw, hw->mac.addr);
+
+	return ret_val;
+}
+
+static void ixgbevf_write_msg_read_ack(struct ixgbe_hw *hw,
+					u32 *msg, u16 size)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 retmsg[IXGBE_VFMAILBOX_SIZE];
+	s32 retval = mbx->ops.write_posted(hw, msg, size);
+
+	if (!retval)
+		mbx->ops.read_posted(hw, retmsg, size);
+}
+
+/**
+ *  ixgbevf_update_mc_addr_list_vf - Update Multicast addresses
+ *  @hw: pointer to the HW structure
+ *  @netdev: pointer to net device structure
+ *
+ *  Updates the Multicast Table Array.
+ **/
+static s32 ixgbevf_update_mc_addr_list_vf(struct ixgbe_hw *hw,
+					  struct net_device *netdev)
+{
+	struct netdev_hw_addr *ha;
+	u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
+	u16 *vector_list = (u16 *)&msgbuf[1];
+	u32 cnt, i;
+
+	/* Each entry in the list uses 1 16 bit word.  We have 30
+	 * 16 bit words available in our HW msg buffer (minus 1 for the
+	 * msg type).  That's 30 hash values if we pack 'em right.  If
+	 * there are more than 30 MC addresses to add then punt the
+	 * extras for now and then add code to handle more than 30 later.
+	 * It would be unusual for a server to request that many multi-cast
+	 * addresses except for in large enterprise network environments.
+	 */
+
+	cnt = netdev_mc_count(netdev);
+	if (cnt > 30)
+		cnt = 30;
+	msgbuf[0] = IXGBE_VF_SET_MULTICAST;
+	msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT;
+
+	i = 0;
+	netdev_for_each_mc_addr(ha, netdev) {
+		if (i == cnt)
+			break;
+		if (is_link_local_ether_addr(ha->addr))
+			continue;
+
+		vector_list[i++] = ixgbevf_mta_vector(hw, ha->addr);
+	}
+
+	ixgbevf_write_msg_read_ack(hw, msgbuf, IXGBE_VFMAILBOX_SIZE);
+
+	return 0;
+}
+
+/**
+ *  ixgbevf_set_vfta_vf - Set/Unset vlan filter table address
+ *  @hw: pointer to the HW structure
+ *  @vlan: 12 bit VLAN ID
+ *  @vind: unused by VF drivers
+ *  @vlan_on: if true then set bit, else clear bit
+ **/
+static s32 ixgbevf_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+			       bool vlan_on)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 msgbuf[2];
+	s32 err;
+
+	msgbuf[0] = IXGBE_VF_SET_VLAN;
+	msgbuf[1] = vlan;
+	/* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
+	msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
+
+	err = mbx->ops.write_posted(hw, msgbuf, 2);
+	if (err)
+		goto mbx_err;
+
+	err = mbx->ops.read_posted(hw, msgbuf, 2);
+	if (err)
+		goto mbx_err;
+
+	/* remove extra bits from the message */
+	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+	msgbuf[0] &= ~(0xFF << IXGBE_VT_MSGINFO_SHIFT);
+
+	if (msgbuf[0] != (IXGBE_VF_SET_VLAN | IXGBE_VT_MSGTYPE_ACK))
+		err = IXGBE_ERR_INVALID_ARGUMENT;
+
+mbx_err:
+	return err;
+}
+
+/**
+ *  ixgbevf_setup_mac_link_vf - Setup MAC link settings
+ *  @hw: pointer to hardware structure
+ *  @speed: Unused in this implementation
+ *  @autoneg: Unused in this implementation
+ *  @autoneg_wait_to_complete: Unused in this implementation
+ *
+ *  Do nothing and return success.  VF drivers are not allowed to change
+ *  global settings.  Maintained for driver compatibility.
+ **/
+static s32 ixgbevf_setup_mac_link_vf(struct ixgbe_hw *hw,
+				     ixgbe_link_speed speed, bool autoneg,
+				     bool autoneg_wait_to_complete)
+{
+	return 0;
+}
+
+/**
+ *  ixgbevf_check_mac_link_vf - Get link/speed status
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @link_up: true is link is up, false otherwise
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+static s32 ixgbevf_check_mac_link_vf(struct ixgbe_hw *hw,
+				     ixgbe_link_speed *speed,
+				     bool *link_up,
+				     bool autoneg_wait_to_complete)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	struct ixgbe_mac_info *mac = &hw->mac;
+	s32 ret_val = 0;
+	u32 links_reg;
+	u32 in_msg = 0;
+
+	/* If we were hit with a reset drop the link */
+	if (!mbx->ops.check_for_rst(hw) || !mbx->timeout)
+		mac->get_link_status = true;
+
+	if (!mac->get_link_status)
+		goto out;
+
+	/* if link status is down no point in checking to see if pf is up */
+	links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+	if (!(links_reg & IXGBE_LINKS_UP))
+		goto out;
+
+	/* for SFP+ modules and DA cables on 82599 it can take up to 500usecs
+	 * before the link status is correct
+	 */
+	if (mac->type == ixgbe_mac_82599_vf) {
+		int i;
+
+		for (i = 0; i < 5; i++) {
+			udelay(100);
+			links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+
+			if (!(links_reg & IXGBE_LINKS_UP))
+				goto out;
+		}
+	}
+
+	switch (links_reg & IXGBE_LINKS_SPEED_82599) {
+	case IXGBE_LINKS_SPEED_10G_82599:
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+		break;
+	case IXGBE_LINKS_SPEED_1G_82599:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		break;
+	case IXGBE_LINKS_SPEED_100_82599:
+		*speed = IXGBE_LINK_SPEED_100_FULL;
+		break;
+	}
+
+	/* if the read failed it could just be a mailbox collision, best wait
+	 * until we are called again and don't report an error */
+	if (mbx->ops.read(hw, &in_msg, 1))
+		goto out;
+
+	if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) {
+		/* msg is not CTS and is NACK we must have lost CTS status */
+		if (in_msg & IXGBE_VT_MSGTYPE_NACK)
+			ret_val = -1;
+		goto out;
+	}
+
+	/* the pf is talking, if we timed out in the past we reinit */
+	if (!mbx->timeout) {
+		ret_val = -1;
+		goto out;
+	}
+
+	/* if we passed all the tests above then the link is up and we no
+	 * longer need to check for link */
+	mac->get_link_status = false;
+
+out:
+	*link_up = !mac->get_link_status;
+	return ret_val;
+}
+
+/**
+ *  ixgbevf_rlpml_set_vf - Set the maximum receive packet length
+ *  @hw: pointer to the HW structure
+ *  @max_size: value to assign to max frame size
+ **/
+void ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size)
+{
+	u32 msgbuf[2];
+
+	msgbuf[0] = IXGBE_VF_SET_LPE;
+	msgbuf[1] = max_size;
+	ixgbevf_write_msg_read_ack(hw, msgbuf, 2);
+}
+
+/**
+ *  ixgbevf_negotiate_api_version - Negotiate supported API version
+ *  @hw: pointer to the HW structure
+ *  @api: integer containing requested API version
+ **/
+int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api)
+{
+	int err;
+	u32 msg[3];
+
+	/* Negotiate the mailbox API version */
+	msg[0] = IXGBE_VF_API_NEGOTIATE;
+	msg[1] = api;
+	msg[2] = 0;
+	err = hw->mbx.ops.write_posted(hw, msg, 3);
+
+	if (!err)
+		err = hw->mbx.ops.read_posted(hw, msg, 3);
+
+	if (!err) {
+		msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+		/* Store value and return 0 on success */
+		if (msg[0] == (IXGBE_VF_API_NEGOTIATE | IXGBE_VT_MSGTYPE_ACK)) {
+			hw->api_version = api;
+			return 0;
+		}
+
+		err = IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	return err;
+}
+
+int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
+		       unsigned int *default_tc)
+{
+	int err;
+	u32 msg[5];
+
+	/* do nothing if API doesn't support ixgbevf_get_queues */
+	switch (hw->api_version) {
+	case ixgbe_mbox_api_11:
+		break;
+	default:
+		return 0;
+	}
+
+	/* Fetch queue configuration from the PF */
+	msg[0] = IXGBE_VF_GET_QUEUE;
+	msg[1] = msg[2] = msg[3] = msg[4] = 0;
+	err = hw->mbx.ops.write_posted(hw, msg, 5);
+
+	if (!err)
+		err = hw->mbx.ops.read_posted(hw, msg, 5);
+
+	if (!err) {
+		msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+		/*
+		 * if we we didn't get an ACK there must have been
+		 * some sort of mailbox error so we should treat it
+		 * as such
+		 */
+		if (msg[0] != (IXGBE_VF_GET_QUEUE | IXGBE_VT_MSGTYPE_ACK))
+			return IXGBE_ERR_MBX;
+
+		/* record and validate values from message */
+		hw->mac.max_tx_queues = msg[IXGBE_VF_TX_QUEUES];
+		if (hw->mac.max_tx_queues == 0 ||
+		    hw->mac.max_tx_queues > IXGBE_VF_MAX_TX_QUEUES)
+			hw->mac.max_tx_queues = IXGBE_VF_MAX_TX_QUEUES;
+
+		hw->mac.max_rx_queues = msg[IXGBE_VF_RX_QUEUES];
+		if (hw->mac.max_rx_queues == 0 ||
+		    hw->mac.max_rx_queues > IXGBE_VF_MAX_RX_QUEUES)
+			hw->mac.max_rx_queues = IXGBE_VF_MAX_RX_QUEUES;
+
+		*num_tcs = msg[IXGBE_VF_TRANS_VLAN];
+		/* in case of unknown state assume we cannot tag frames */
+		if (*num_tcs > hw->mac.max_rx_queues)
+			*num_tcs = 1;
+
+		*default_tc = msg[IXGBE_VF_DEF_QUEUE];
+		/* default to queue 0 on out-of-bounds queue number */
+		if (*default_tc >= hw->mac.max_tx_queues)
+			*default_tc = 0;
+	}
+
+	return err;
+}
+
+static const struct ixgbe_mac_operations ixgbevf_mac_ops = {
+	.init_hw             = ixgbevf_init_hw_vf,
+	.reset_hw            = ixgbevf_reset_hw_vf,
+	.start_hw            = ixgbevf_start_hw_vf,
+	.get_mac_addr        = ixgbevf_get_mac_addr_vf,
+	.stop_adapter        = ixgbevf_stop_hw_vf,
+	.setup_link          = ixgbevf_setup_mac_link_vf,
+	.check_link          = ixgbevf_check_mac_link_vf,
+	.set_rar             = ixgbevf_set_rar_vf,
+	.update_mc_addr_list = ixgbevf_update_mc_addr_list_vf,
+	.set_uc_addr         = ixgbevf_set_uc_addr_vf,
+	.set_vfta            = ixgbevf_set_vfta_vf,
+};
+
+const struct ixgbevf_info ixgbevf_82599_vf_info = {
+	.mac = ixgbe_mac_82599_vf,
+	.mac_ops = &ixgbevf_mac_ops,
+};
+
+const struct ixgbevf_info ixgbevf_X540_vf_info = {
+	.mac = ixgbe_mac_X540_vf,
+	.mac_ops = &ixgbevf_mac_ops,
+};