Fixed MTP to work with TWRP

drivers/net/wireless/brcm80211/brcmsmac/pmu.c

@@ -0,0 +1,165 @@
+/*
+ * Copyright (c) 2011 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <brcm_hw_ids.h>
+#include <chipcommon.h>
+#include <brcmu_utils.h>
+#include "pub.h"
+#include "aiutils.h"
+#include "pmu.h"
+#include "soc.h"
+
+/*
+ * external LPO crystal frequency
+ */
+#define EXT_ILP_HZ 32768
+
+/*
+ * Duration for ILP clock frequency measurment in milliseconds
+ *
+ * remark: 1000 must be an integer multiple of this duration
+ */
+#define ILP_CALC_DUR	10
+
+/* Fields in pmucontrol */
+#define	PCTL_ILP_DIV_MASK	0xffff0000
+#define	PCTL_ILP_DIV_SHIFT	16
+#define PCTL_PLL_PLLCTL_UPD	0x00000400	/* rev 2 */
+#define PCTL_NOILP_ON_WAIT	0x00000200	/* rev 1 */
+#define	PCTL_HT_REQ_EN		0x00000100
+#define	PCTL_ALP_REQ_EN		0x00000080
+#define	PCTL_XTALFREQ_MASK	0x0000007c
+#define	PCTL_XTALFREQ_SHIFT	2
+#define	PCTL_ILP_DIV_EN		0x00000002
+#define	PCTL_LPO_SEL		0x00000001
+
+/* ILP clock */
+#define	ILP_CLOCK		32000
+
+/* ALP clock on pre-PMU chips */
+#define	ALP_CLOCK		20000000
+
+/* pmustatus */
+#define PST_EXTLPOAVAIL	0x0100
+#define PST_WDRESET	0x0080
+#define	PST_INTPEND	0x0040
+#define	PST_SBCLKST	0x0030
+#define	PST_SBCLKST_ILP	0x0010
+#define	PST_SBCLKST_ALP	0x0020
+#define	PST_SBCLKST_HT	0x0030
+#define	PST_ALPAVAIL	0x0008
+#define	PST_HTAVAIL	0x0004
+#define	PST_RESINIT	0x0003
+
+/* PMU resource bit position */
+#define PMURES_BIT(bit)	(1 << (bit))
+
+/* PMU corerev and chip specific PLL controls.
+ * PMU<rev>_PLL<num>_XX where <rev> is PMU corerev and <num> is an arbitrary
+ * number to differentiate different PLLs controlled by the same PMU rev.
+ */
+
+/* pmu XtalFreqRatio */
+#define	PMU_XTALFREQ_REG_ILPCTR_MASK	0x00001FFF
+#define	PMU_XTALFREQ_REG_MEASURE_MASK	0x80000000
+#define	PMU_XTALFREQ_REG_MEASURE_SHIFT	31
+
+/* 4313 resources */
+#define	RES4313_BB_PU_RSRC		0
+#define	RES4313_ILP_REQ_RSRC		1
+#define	RES4313_XTAL_PU_RSRC		2
+#define	RES4313_ALP_AVAIL_RSRC		3
+#define	RES4313_RADIO_PU_RSRC		4
+#define	RES4313_BG_PU_RSRC		5
+#define	RES4313_VREG1P4_PU_RSRC		6
+#define	RES4313_AFE_PWRSW_RSRC		7
+#define	RES4313_RX_PWRSW_RSRC		8
+#define	RES4313_TX_PWRSW_RSRC		9
+#define	RES4313_BB_PWRSW_RSRC		10
+#define	RES4313_SYNTH_PWRSW_RSRC	11
+#define	RES4313_MISC_PWRSW_RSRC		12
+#define	RES4313_BB_PLL_PWRSW_RSRC	13
+#define	RES4313_HT_AVAIL_RSRC		14
+#define	RES4313_MACPHY_CLK_AVAIL_RSRC	15
+
+u16 si_pmu_fast_pwrup_delay(struct si_pub *sih)
+{
+	uint delay = PMU_MAX_TRANSITION_DLY;
+
+	switch (ai_get_chip_id(sih)) {
+	case BCMA_CHIP_ID_BCM43224:
+	case BCMA_CHIP_ID_BCM43225:
+	case BCMA_CHIP_ID_BCM4313:
+		delay = 3700;
+		break;
+	default:
+		break;
+	}
+
+	return (u16) delay;
+}
+
+u32 si_pmu_measure_alpclk(struct si_pub *sih)
+{
+	struct si_info *sii = container_of(sih, struct si_info, pub);
+	struct bcma_device *core;
+	u32 alp_khz;
+
+	if (ai_get_pmurev(sih) < 10)
+		return 0;
+
+	/* Remember original core before switch to chipc */
+	core = sii->icbus->drv_cc.core;
+
+	if (bcma_read32(core, CHIPCREGOFFS(pmustatus)) & PST_EXTLPOAVAIL) {
+		u32 ilp_ctr, alp_hz;
+
+		/*
+		 * Enable the reg to measure the freq,
+		 * in case it was disabled before
+		 */
+		bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq),
+			    1U << PMU_XTALFREQ_REG_MEASURE_SHIFT);
+
+		/* Delay for well over 4 ILP clocks */
+		udelay(1000);
+
+		/* Read the latched number of ALP ticks per 4 ILP ticks */
+		ilp_ctr = bcma_read32(core, CHIPCREGOFFS(pmu_xtalfreq)) &
+			  PMU_XTALFREQ_REG_ILPCTR_MASK;
+
+		/*
+		 * Turn off the PMU_XTALFREQ_REG_MEASURE_SHIFT
+		 * bit to save power
+		 */
+		bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq), 0);
+
+		/* Calculate ALP frequency */
+		alp_hz = (ilp_ctr * EXT_ILP_HZ) / 4;
+
+		/*
+		 * Round to nearest 100KHz, and at
+		 * the same time convert to KHz
+		 */
+		alp_khz = (alp_hz + 50000) / 100000 * 100;
+	} else
+		alp_khz = 0;
+
+	return alp_khz;
+}