mirror of
https://github.com/AetherDroid/android_kernel_samsung_on5xelte.git
synced 2025-09-08 09:08:05 -04:00
Fixed MTP to work with TWRP
This commit is contained in:
awab228
commit
f6dfaef42e
50820 changed files with 20846062 additions and 0 deletions
236
drivers/pcmcia/sa1111_lubbock.c
Normal file
236
drivers/pcmcia/sa1111_lubbock.c
Normal file
|
|
@ -0,0 +1,236 @@
|
|||
/*
|
||||
* linux/drivers/pcmcia/pxa2xx_lubbock.c
|
||||
*
|
||||
* Author: George Davis
|
||||
* Created: Jan 10, 2002
|
||||
* Copyright: MontaVista Software Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* Originally based upon linux/drivers/pcmcia/sa1100_neponset.c
|
||||
*
|
||||
* Lubbock PCMCIA specific routines.
|
||||
*
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/hardware/sa1111.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <mach/lubbock.h>
|
||||
|
||||
#include "sa1111_generic.h"
|
||||
|
||||
static int
|
||||
lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
|
||||
const socket_state_t *state)
|
||||
{
|
||||
struct sa1111_pcmcia_socket *s = to_skt(skt);
|
||||
unsigned int pa_dwr_mask, pa_dwr_set, misc_mask, misc_set;
|
||||
int ret = 0;
|
||||
|
||||
pa_dwr_mask = pa_dwr_set = misc_mask = misc_set = 0;
|
||||
|
||||
/* Lubbock uses the Maxim MAX1602, with the following connections:
|
||||
*
|
||||
* Socket 0 (PCMCIA):
|
||||
* MAX1602 Lubbock Register
|
||||
* Pin Signal
|
||||
* ----- ------- ----------------------
|
||||
* A0VPP S0_PWR0 SA-1111 GPIO A<0>
|
||||
* A1VPP S0_PWR1 SA-1111 GPIO A<1>
|
||||
* A0VCC S0_PWR2 SA-1111 GPIO A<2>
|
||||
* A1VCC S0_PWR3 SA-1111 GPIO A<3>
|
||||
* VX VCC
|
||||
* VY +3.3V
|
||||
* 12IN +12V
|
||||
* CODE +3.3V Cirrus Code, CODE = High (VY)
|
||||
*
|
||||
* Socket 1 (CF):
|
||||
* MAX1602 Lubbock Register
|
||||
* Pin Signal
|
||||
* ----- ------- ----------------------
|
||||
* A0VPP GND VPP is not connected
|
||||
* A1VPP GND VPP is not connected
|
||||
* A0VCC S1_PWR0 MISC_WR<14>
|
||||
* A1VCC S1_PWR1 MISC_WR<15>
|
||||
* VX VCC
|
||||
* VY +3.3V
|
||||
* 12IN GND VPP is not connected
|
||||
* CODE +3.3V Cirrus Code, CODE = High (VY)
|
||||
*
|
||||
*/
|
||||
|
||||
again:
|
||||
switch (skt->nr) {
|
||||
case 0:
|
||||
pa_dwr_mask = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
|
||||
|
||||
switch (state->Vcc) {
|
||||
case 0: /* Hi-Z */
|
||||
break;
|
||||
|
||||
case 33: /* VY */
|
||||
pa_dwr_set |= GPIO_A3;
|
||||
break;
|
||||
|
||||
case 50: /* VX */
|
||||
pa_dwr_set |= GPIO_A2;
|
||||
break;
|
||||
|
||||
default:
|
||||
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
|
||||
__func__, state->Vcc);
|
||||
ret = -1;
|
||||
}
|
||||
|
||||
switch (state->Vpp) {
|
||||
case 0: /* Hi-Z */
|
||||
break;
|
||||
|
||||
case 120: /* 12IN */
|
||||
pa_dwr_set |= GPIO_A1;
|
||||
break;
|
||||
|
||||
default: /* VCC */
|
||||
if (state->Vpp == state->Vcc)
|
||||
pa_dwr_set |= GPIO_A0;
|
||||
else {
|
||||
printk(KERN_ERR "%s(): unrecognized Vpp %u\n",
|
||||
__func__, state->Vpp);
|
||||
ret = -1;
|
||||
break;
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
case 1:
|
||||
misc_mask = (1 << 15) | (1 << 14);
|
||||
|
||||
switch (state->Vcc) {
|
||||
case 0: /* Hi-Z */
|
||||
break;
|
||||
|
||||
case 33: /* VY */
|
||||
misc_set |= 1 << 15;
|
||||
break;
|
||||
|
||||
case 50: /* VX */
|
||||
misc_set |= 1 << 14;
|
||||
break;
|
||||
|
||||
default:
|
||||
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
|
||||
__func__, state->Vcc);
|
||||
ret = -1;
|
||||
break;
|
||||
}
|
||||
|
||||
if (state->Vpp != state->Vcc && state->Vpp != 0) {
|
||||
printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n",
|
||||
__func__, state->Vpp);
|
||||
ret = -1;
|
||||
break;
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
ret = -1;
|
||||
}
|
||||
|
||||
if (ret == 0)
|
||||
ret = sa1111_pcmcia_configure_socket(skt, state);
|
||||
|
||||
if (ret == 0) {
|
||||
lubbock_set_misc_wr(misc_mask, misc_set);
|
||||
sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
|
||||
}
|
||||
|
||||
#if 1
|
||||
if (ret == 0 && state->Vcc == 33) {
|
||||
struct pcmcia_state new_state;
|
||||
|
||||
/*
|
||||
* HACK ALERT:
|
||||
* We can't sense the voltage properly on Lubbock before
|
||||
* actually applying some power to the socket (catch 22).
|
||||
* Resense the socket Voltage Sense pins after applying
|
||||
* socket power.
|
||||
*
|
||||
* Note: It takes about 2.5ms for the MAX1602 VCC output
|
||||
* to rise.
|
||||
*/
|
||||
mdelay(3);
|
||||
|
||||
sa1111_pcmcia_socket_state(skt, &new_state);
|
||||
|
||||
if (!new_state.vs_3v && !new_state.vs_Xv) {
|
||||
/*
|
||||
* Switch to 5V, Configure socket with 5V voltage
|
||||
*/
|
||||
lubbock_set_misc_wr(misc_mask, 0);
|
||||
sa1111_set_io(s->dev, pa_dwr_mask, 0);
|
||||
|
||||
/*
|
||||
* It takes about 100ms to turn off Vcc.
|
||||
*/
|
||||
mdelay(100);
|
||||
|
||||
/*
|
||||
* We need to hack around the const qualifier as
|
||||
* well to keep this ugly workaround localized and
|
||||
* not force it to the rest of the code. Barf bags
|
||||
* available in the seat pocket in front of you!
|
||||
*/
|
||||
((socket_state_t *)state)->Vcc = 50;
|
||||
((socket_state_t *)state)->Vpp = 50;
|
||||
goto again;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct pcmcia_low_level lubbock_pcmcia_ops = {
|
||||
.owner = THIS_MODULE,
|
||||
.configure_socket = lubbock_pcmcia_configure_socket,
|
||||
.first = 0,
|
||||
.nr = 2,
|
||||
};
|
||||
|
||||
#include "pxa2xx_base.h"
|
||||
|
||||
int pcmcia_lubbock_init(struct sa1111_dev *sadev)
|
||||
{
|
||||
int ret = -ENODEV;
|
||||
|
||||
if (machine_is_lubbock()) {
|
||||
/*
|
||||
* Set GPIO_A<3:0> to be outputs for the MAX1600,
|
||||
* and switch to standby mode.
|
||||
*/
|
||||
sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
|
||||
sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
|
||||
sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
|
||||
|
||||
/* Set CF Socket 1 power to standby mode. */
|
||||
lubbock_set_misc_wr((1 << 15) | (1 << 14), 0);
|
||||
|
||||
pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
|
||||
pxa2xx_configure_sockets(&sadev->dev);
|
||||
ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
|
||||
pxa2xx_drv_pcmcia_add_one);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Add table
Add a link
Reference in a new issue