mirror of
https://github.com/AetherDroid/android_kernel_samsung_on5xelte.git
synced 2025-09-09 01:28:05 -04:00
Fixed MTP to work with TWRP
This commit is contained in:
awab228
commit
f6dfaef42e
50820 changed files with 20846062 additions and 0 deletions
461
drivers/regulator/ab8500-ext.c
Normal file
461
drivers/regulator/ab8500-ext.c
Normal file
|
|
@ -0,0 +1,461 @@
|
|||
/*
|
||||
* Copyright (C) ST-Ericsson SA 2010
|
||||
*
|
||||
* License Terms: GNU General Public License v2
|
||||
*
|
||||
* Authors: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
|
||||
*
|
||||
* This file is based on drivers/regulator/ab8500.c
|
||||
*
|
||||
* AB8500 external regulators
|
||||
*
|
||||
* ab8500-ext supports the following regulators:
|
||||
* - VextSupply3
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
#include <linux/mfd/abx500.h>
|
||||
#include <linux/mfd/abx500/ab8500.h>
|
||||
#include <linux/regulator/ab8500.h>
|
||||
|
||||
/**
|
||||
* struct ab8500_ext_regulator_info - ab8500 regulator information
|
||||
* @dev: device pointer
|
||||
* @desc: regulator description
|
||||
* @rdev: regulator device
|
||||
* @cfg: regulator configuration (extension of regulator FW configuration)
|
||||
* @update_bank: bank to control on/off
|
||||
* @update_reg: register to control on/off
|
||||
* @update_mask: mask to enable/disable and set mode of regulator
|
||||
* @update_val: bits holding the regulator current mode
|
||||
* @update_val_hp: bits to set EN pin active (LPn pin deactive)
|
||||
* normally this means high power mode
|
||||
* @update_val_lp: bits to set EN pin active and LPn pin active
|
||||
* normally this means low power mode
|
||||
* @update_val_hw: bits to set regulator pins in HW control
|
||||
* SysClkReq pins and logic will choose mode
|
||||
*/
|
||||
struct ab8500_ext_regulator_info {
|
||||
struct device *dev;
|
||||
struct regulator_desc desc;
|
||||
struct regulator_dev *rdev;
|
||||
struct ab8500_ext_regulator_cfg *cfg;
|
||||
u8 update_bank;
|
||||
u8 update_reg;
|
||||
u8 update_mask;
|
||||
u8 update_val;
|
||||
u8 update_val_hp;
|
||||
u8 update_val_lp;
|
||||
u8 update_val_hw;
|
||||
};
|
||||
|
||||
static int ab8500_ext_regulator_enable(struct regulator_dev *rdev)
|
||||
{
|
||||
int ret;
|
||||
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
u8 regval;
|
||||
|
||||
if (info == NULL) {
|
||||
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/*
|
||||
* To satisfy both HW high power request and SW request, the regulator
|
||||
* must be on in high power.
|
||||
*/
|
||||
if (info->cfg && info->cfg->hwreq)
|
||||
regval = info->update_val_hp;
|
||||
else
|
||||
regval = info->update_val;
|
||||
|
||||
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
||||
info->update_bank, info->update_reg,
|
||||
info->update_mask, regval);
|
||||
if (ret < 0) {
|
||||
dev_err(rdev_get_dev(info->rdev),
|
||||
"couldn't set enable bits for regulator\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
dev_dbg(rdev_get_dev(rdev),
|
||||
"%s-enable (bank, reg, mask, value): 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
|
||||
info->desc.name, info->update_bank, info->update_reg,
|
||||
info->update_mask, regval);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ab8500_ext_regulator_disable(struct regulator_dev *rdev)
|
||||
{
|
||||
int ret;
|
||||
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
u8 regval;
|
||||
|
||||
if (info == NULL) {
|
||||
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/*
|
||||
* Set the regulator in HW request mode if configured
|
||||
*/
|
||||
if (info->cfg && info->cfg->hwreq)
|
||||
regval = info->update_val_hw;
|
||||
else
|
||||
regval = 0;
|
||||
|
||||
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
||||
info->update_bank, info->update_reg,
|
||||
info->update_mask, regval);
|
||||
if (ret < 0) {
|
||||
dev_err(rdev_get_dev(info->rdev),
|
||||
"couldn't set disable bits for regulator\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
dev_dbg(rdev_get_dev(rdev), "%s-disable (bank, reg, mask, value):"
|
||||
" 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
|
||||
info->desc.name, info->update_bank, info->update_reg,
|
||||
info->update_mask, regval);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ab8500_ext_regulator_is_enabled(struct regulator_dev *rdev)
|
||||
{
|
||||
int ret;
|
||||
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
u8 regval;
|
||||
|
||||
if (info == NULL) {
|
||||
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = abx500_get_register_interruptible(info->dev,
|
||||
info->update_bank, info->update_reg, ®val);
|
||||
if (ret < 0) {
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"couldn't read 0x%x register\n", info->update_reg);
|
||||
return ret;
|
||||
}
|
||||
|
||||
dev_dbg(rdev_get_dev(rdev), "%s-is_enabled (bank, reg, mask, value):"
|
||||
" 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
|
||||
info->desc.name, info->update_bank, info->update_reg,
|
||||
info->update_mask, regval);
|
||||
|
||||
if (((regval & info->update_mask) == info->update_val_lp) ||
|
||||
((regval & info->update_mask) == info->update_val_hp))
|
||||
return 1;
|
||||
else
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ab8500_ext_regulator_set_mode(struct regulator_dev *rdev,
|
||||
unsigned int mode)
|
||||
{
|
||||
int ret = 0;
|
||||
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
u8 regval;
|
||||
|
||||
if (info == NULL) {
|
||||
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
regval = info->update_val_hp;
|
||||
break;
|
||||
case REGULATOR_MODE_IDLE:
|
||||
regval = info->update_val_lp;
|
||||
break;
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* If regulator is enabled and info->cfg->hwreq is set, the regulator
|
||||
must be on in high power, so we don't need to write the register with
|
||||
the same value.
|
||||
*/
|
||||
if (ab8500_ext_regulator_is_enabled(rdev) &&
|
||||
!(info->cfg && info->cfg->hwreq)) {
|
||||
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
||||
info->update_bank, info->update_reg,
|
||||
info->update_mask, regval);
|
||||
if (ret < 0) {
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"Could not set regulator mode.\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
dev_dbg(rdev_get_dev(rdev),
|
||||
"%s-set_mode (bank, reg, mask, value): "
|
||||
"0x%x, 0x%x, 0x%x, 0x%x\n",
|
||||
info->desc.name, info->update_bank, info->update_reg,
|
||||
info->update_mask, regval);
|
||||
}
|
||||
|
||||
info->update_val = regval;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static unsigned int ab8500_ext_regulator_get_mode(struct regulator_dev *rdev)
|
||||
{
|
||||
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
int ret;
|
||||
|
||||
if (info == NULL) {
|
||||
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (info->update_val == info->update_val_hp)
|
||||
ret = REGULATOR_MODE_NORMAL;
|
||||
else if (info->update_val == info->update_val_lp)
|
||||
ret = REGULATOR_MODE_IDLE;
|
||||
else
|
||||
ret = -EINVAL;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ab8500_ext_set_voltage(struct regulator_dev *rdev, int min_uV,
|
||||
int max_uV, unsigned *selector)
|
||||
{
|
||||
struct regulation_constraints *regu_constraints = rdev->constraints;
|
||||
|
||||
if (!regu_constraints) {
|
||||
dev_err(rdev_get_dev(rdev), "No regulator constraints\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (regu_constraints->min_uV == min_uV &&
|
||||
regu_constraints->max_uV == max_uV)
|
||||
return 0;
|
||||
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"Requested min %duV max %duV != constrained min %duV max %duV\n",
|
||||
min_uV, max_uV,
|
||||
regu_constraints->min_uV, regu_constraints->max_uV);
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int ab8500_ext_list_voltage(struct regulator_dev *rdev,
|
||||
unsigned selector)
|
||||
{
|
||||
struct regulation_constraints *regu_constraints = rdev->constraints;
|
||||
|
||||
if (regu_constraints == NULL) {
|
||||
dev_err(rdev_get_dev(rdev), "regulator constraints null pointer\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
/* return the uV for the fixed regulators */
|
||||
if (regu_constraints->min_uV && regu_constraints->max_uV) {
|
||||
if (regu_constraints->min_uV == regu_constraints->max_uV)
|
||||
return regu_constraints->min_uV;
|
||||
}
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static struct regulator_ops ab8500_ext_regulator_ops = {
|
||||
.enable = ab8500_ext_regulator_enable,
|
||||
.disable = ab8500_ext_regulator_disable,
|
||||
.is_enabled = ab8500_ext_regulator_is_enabled,
|
||||
.set_mode = ab8500_ext_regulator_set_mode,
|
||||
.get_mode = ab8500_ext_regulator_get_mode,
|
||||
.set_voltage = ab8500_ext_set_voltage,
|
||||
.list_voltage = ab8500_ext_list_voltage,
|
||||
};
|
||||
|
||||
static struct ab8500_ext_regulator_info
|
||||
ab8500_ext_regulator_info[AB8500_NUM_EXT_REGULATORS] = {
|
||||
[AB8500_EXT_SUPPLY1] = {
|
||||
.desc = {
|
||||
.name = "VEXTSUPPLY1",
|
||||
.ops = &ab8500_ext_regulator_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.id = AB8500_EXT_SUPPLY1,
|
||||
.owner = THIS_MODULE,
|
||||
.n_voltages = 1,
|
||||
},
|
||||
.update_bank = 0x04,
|
||||
.update_reg = 0x08,
|
||||
.update_mask = 0x03,
|
||||
.update_val = 0x01,
|
||||
.update_val_hp = 0x01,
|
||||
.update_val_lp = 0x03,
|
||||
.update_val_hw = 0x02,
|
||||
},
|
||||
[AB8500_EXT_SUPPLY2] = {
|
||||
.desc = {
|
||||
.name = "VEXTSUPPLY2",
|
||||
.ops = &ab8500_ext_regulator_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.id = AB8500_EXT_SUPPLY2,
|
||||
.owner = THIS_MODULE,
|
||||
.n_voltages = 1,
|
||||
},
|
||||
.update_bank = 0x04,
|
||||
.update_reg = 0x08,
|
||||
.update_mask = 0x0c,
|
||||
.update_val = 0x04,
|
||||
.update_val_hp = 0x04,
|
||||
.update_val_lp = 0x0c,
|
||||
.update_val_hw = 0x08,
|
||||
},
|
||||
[AB8500_EXT_SUPPLY3] = {
|
||||
.desc = {
|
||||
.name = "VEXTSUPPLY3",
|
||||
.ops = &ab8500_ext_regulator_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.id = AB8500_EXT_SUPPLY3,
|
||||
.owner = THIS_MODULE,
|
||||
.n_voltages = 1,
|
||||
},
|
||||
.update_bank = 0x04,
|
||||
.update_reg = 0x08,
|
||||
.update_mask = 0x30,
|
||||
.update_val = 0x10,
|
||||
.update_val_hp = 0x10,
|
||||
.update_val_lp = 0x30,
|
||||
.update_val_hw = 0x20,
|
||||
},
|
||||
};
|
||||
|
||||
static struct of_regulator_match ab8500_ext_regulator_match[] = {
|
||||
{ .name = "ab8500_ext1", .driver_data = (void *) AB8500_EXT_SUPPLY1, },
|
||||
{ .name = "ab8500_ext2", .driver_data = (void *) AB8500_EXT_SUPPLY2, },
|
||||
{ .name = "ab8500_ext3", .driver_data = (void *) AB8500_EXT_SUPPLY3, },
|
||||
};
|
||||
|
||||
static int ab8500_ext_regulator_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
|
||||
struct ab8500_platform_data *ppdata;
|
||||
struct ab8500_regulator_platform_data *pdata;
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
struct regulator_config config = { };
|
||||
int i, err;
|
||||
|
||||
if (np) {
|
||||
err = of_regulator_match(&pdev->dev, np,
|
||||
ab8500_ext_regulator_match,
|
||||
ARRAY_SIZE(ab8500_ext_regulator_match));
|
||||
if (err < 0) {
|
||||
dev_err(&pdev->dev,
|
||||
"Error parsing regulator init data: %d\n", err);
|
||||
return err;
|
||||
}
|
||||
}
|
||||
|
||||
if (!ab8500) {
|
||||
dev_err(&pdev->dev, "null mfd parent\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ppdata = dev_get_platdata(ab8500->dev);
|
||||
if (!ppdata) {
|
||||
dev_err(&pdev->dev, "null parent pdata\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
pdata = ppdata->regulator;
|
||||
if (!pdata) {
|
||||
dev_err(&pdev->dev, "null pdata\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* make sure the platform data has the correct size */
|
||||
if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) {
|
||||
dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* check for AB8500 2.x */
|
||||
if (is_ab8500_2p0_or_earlier(ab8500)) {
|
||||
struct ab8500_ext_regulator_info *info;
|
||||
|
||||
/* VextSupply3LPn is inverted on AB8500 2.x */
|
||||
info = &ab8500_ext_regulator_info[AB8500_EXT_SUPPLY3];
|
||||
info->update_val = 0x30;
|
||||
info->update_val_hp = 0x30;
|
||||
info->update_val_lp = 0x10;
|
||||
}
|
||||
|
||||
/* register all regulators */
|
||||
for (i = 0; i < ARRAY_SIZE(ab8500_ext_regulator_info); i++) {
|
||||
struct ab8500_ext_regulator_info *info = NULL;
|
||||
|
||||
/* assign per-regulator data */
|
||||
info = &ab8500_ext_regulator_info[i];
|
||||
info->dev = &pdev->dev;
|
||||
info->cfg = (struct ab8500_ext_regulator_cfg *)
|
||||
pdata->ext_regulator[i].driver_data;
|
||||
|
||||
config.dev = &pdev->dev;
|
||||
config.driver_data = info;
|
||||
config.of_node = ab8500_ext_regulator_match[i].of_node;
|
||||
config.init_data = (np) ?
|
||||
ab8500_ext_regulator_match[i].init_data :
|
||||
&pdata->ext_regulator[i];
|
||||
|
||||
/* register regulator with framework */
|
||||
info->rdev = devm_regulator_register(&pdev->dev, &info->desc,
|
||||
&config);
|
||||
if (IS_ERR(info->rdev)) {
|
||||
err = PTR_ERR(info->rdev);
|
||||
dev_err(&pdev->dev, "failed to register regulator %s\n",
|
||||
info->desc.name);
|
||||
return err;
|
||||
}
|
||||
|
||||
dev_dbg(rdev_get_dev(info->rdev),
|
||||
"%s-probed\n", info->desc.name);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver ab8500_ext_regulator_driver = {
|
||||
.probe = ab8500_ext_regulator_probe,
|
||||
.driver = {
|
||||
.name = "ab8500-ext-regulator",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init ab8500_ext_regulator_init(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = platform_driver_register(&ab8500_ext_regulator_driver);
|
||||
if (ret)
|
||||
pr_err("Failed to register ab8500 ext regulator: %d\n", ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
subsys_initcall(ab8500_ext_regulator_init);
|
||||
|
||||
static void __exit ab8500_ext_regulator_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&ab8500_ext_regulator_driver);
|
||||
}
|
||||
module_exit(ab8500_ext_regulator_exit);
|
||||
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>");
|
||||
MODULE_DESCRIPTION("AB8500 external regulator driver");
|
||||
MODULE_ALIAS("platform:ab8500-ext-regulator");
|
||||
Loading…
Add table
Add a link
Reference in a new issue