mirror of
https://github.com/AetherDroid/android_kernel_samsung_on5xelte.git
synced 2025-09-08 17:18:05 -04:00
Fixed MTP to work with TWRP
This commit is contained in:
awab228
commit
f6dfaef42e
50820 changed files with 20846062 additions and 0 deletions
433
drivers/scsi/gvp11.c
Normal file
433
drivers/scsi/gvp11.c
Normal file
|
|
@ -0,0 +1,433 @@
|
|||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/zorro.h>
|
||||
#include <linux/module.h>
|
||||
|
||||
#include <asm/page.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/amigaints.h>
|
||||
#include <asm/amigahw.h>
|
||||
|
||||
#include "scsi.h"
|
||||
#include "wd33c93.h"
|
||||
#include "gvp11.h"
|
||||
|
||||
|
||||
#define CHECK_WD33C93
|
||||
|
||||
struct gvp11_hostdata {
|
||||
struct WD33C93_hostdata wh;
|
||||
struct gvp11_scsiregs *regs;
|
||||
};
|
||||
|
||||
static irqreturn_t gvp11_intr(int irq, void *data)
|
||||
{
|
||||
struct Scsi_Host *instance = data;
|
||||
struct gvp11_hostdata *hdata = shost_priv(instance);
|
||||
unsigned int status = hdata->regs->CNTR;
|
||||
unsigned long flags;
|
||||
|
||||
if (!(status & GVP11_DMAC_INT_PENDING))
|
||||
return IRQ_NONE;
|
||||
|
||||
spin_lock_irqsave(instance->host_lock, flags);
|
||||
wd33c93_intr(instance);
|
||||
spin_unlock_irqrestore(instance->host_lock, flags);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int gvp11_xfer_mask = 0;
|
||||
|
||||
void gvp11_setup(char *str, int *ints)
|
||||
{
|
||||
gvp11_xfer_mask = ints[1];
|
||||
}
|
||||
|
||||
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
|
||||
{
|
||||
struct Scsi_Host *instance = cmd->device->host;
|
||||
struct gvp11_hostdata *hdata = shost_priv(instance);
|
||||
struct WD33C93_hostdata *wh = &hdata->wh;
|
||||
struct gvp11_scsiregs *regs = hdata->regs;
|
||||
unsigned short cntr = GVP11_DMAC_INT_ENABLE;
|
||||
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
|
||||
int bank_mask;
|
||||
static int scsi_alloc_out_of_range = 0;
|
||||
|
||||
/* use bounce buffer if the physical address is bad */
|
||||
if (addr & wh->dma_xfer_mask) {
|
||||
wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
|
||||
|
||||
if (!scsi_alloc_out_of_range) {
|
||||
wh->dma_bounce_buffer =
|
||||
kmalloc(wh->dma_bounce_len, GFP_KERNEL);
|
||||
wh->dma_buffer_pool = BUF_SCSI_ALLOCED;
|
||||
}
|
||||
|
||||
if (scsi_alloc_out_of_range ||
|
||||
!wh->dma_bounce_buffer) {
|
||||
wh->dma_bounce_buffer =
|
||||
amiga_chip_alloc(wh->dma_bounce_len,
|
||||
"GVP II SCSI Bounce Buffer");
|
||||
|
||||
if (!wh->dma_bounce_buffer) {
|
||||
wh->dma_bounce_len = 0;
|
||||
return 1;
|
||||
}
|
||||
|
||||
wh->dma_buffer_pool = BUF_CHIP_ALLOCED;
|
||||
}
|
||||
|
||||
/* check if the address of the bounce buffer is OK */
|
||||
addr = virt_to_bus(wh->dma_bounce_buffer);
|
||||
|
||||
if (addr & wh->dma_xfer_mask) {
|
||||
/* fall back to Chip RAM if address out of range */
|
||||
if (wh->dma_buffer_pool == BUF_SCSI_ALLOCED) {
|
||||
kfree(wh->dma_bounce_buffer);
|
||||
scsi_alloc_out_of_range = 1;
|
||||
} else {
|
||||
amiga_chip_free(wh->dma_bounce_buffer);
|
||||
}
|
||||
|
||||
wh->dma_bounce_buffer =
|
||||
amiga_chip_alloc(wh->dma_bounce_len,
|
||||
"GVP II SCSI Bounce Buffer");
|
||||
|
||||
if (!wh->dma_bounce_buffer) {
|
||||
wh->dma_bounce_len = 0;
|
||||
return 1;
|
||||
}
|
||||
|
||||
addr = virt_to_bus(wh->dma_bounce_buffer);
|
||||
wh->dma_buffer_pool = BUF_CHIP_ALLOCED;
|
||||
}
|
||||
|
||||
if (!dir_in) {
|
||||
/* copy to bounce buffer for a write */
|
||||
memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr,
|
||||
cmd->SCp.this_residual);
|
||||
}
|
||||
}
|
||||
|
||||
/* setup dma direction */
|
||||
if (!dir_in)
|
||||
cntr |= GVP11_DMAC_DIR_WRITE;
|
||||
|
||||
wh->dma_dir = dir_in;
|
||||
regs->CNTR = cntr;
|
||||
|
||||
/* setup DMA *physical* address */
|
||||
regs->ACR = addr;
|
||||
|
||||
if (dir_in) {
|
||||
/* invalidate any cache */
|
||||
cache_clear(addr, cmd->SCp.this_residual);
|
||||
} else {
|
||||
/* push any dirty cache */
|
||||
cache_push(addr, cmd->SCp.this_residual);
|
||||
}
|
||||
|
||||
bank_mask = (~wh->dma_xfer_mask >> 18) & 0x01c0;
|
||||
if (bank_mask)
|
||||
regs->BANK = bank_mask & (addr >> 18);
|
||||
|
||||
/* start DMA */
|
||||
regs->ST_DMA = 1;
|
||||
|
||||
/* return success */
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
|
||||
int status)
|
||||
{
|
||||
struct gvp11_hostdata *hdata = shost_priv(instance);
|
||||
struct WD33C93_hostdata *wh = &hdata->wh;
|
||||
struct gvp11_scsiregs *regs = hdata->regs;
|
||||
|
||||
/* stop DMA */
|
||||
regs->SP_DMA = 1;
|
||||
/* remove write bit from CONTROL bits */
|
||||
regs->CNTR = GVP11_DMAC_INT_ENABLE;
|
||||
|
||||
/* copy from a bounce buffer, if necessary */
|
||||
if (status && wh->dma_bounce_buffer) {
|
||||
if (wh->dma_dir && SCpnt)
|
||||
memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer,
|
||||
SCpnt->SCp.this_residual);
|
||||
|
||||
if (wh->dma_buffer_pool == BUF_SCSI_ALLOCED)
|
||||
kfree(wh->dma_bounce_buffer);
|
||||
else
|
||||
amiga_chip_free(wh->dma_bounce_buffer);
|
||||
|
||||
wh->dma_bounce_buffer = NULL;
|
||||
wh->dma_bounce_len = 0;
|
||||
}
|
||||
}
|
||||
|
||||
static int gvp11_bus_reset(struct scsi_cmnd *cmd)
|
||||
{
|
||||
struct Scsi_Host *instance = cmd->device->host;
|
||||
|
||||
/* FIXME perform bus-specific reset */
|
||||
|
||||
/* FIXME 2: shouldn't we no-op this function (return
|
||||
FAILED), and fall back to host reset function,
|
||||
wd33c93_host_reset ? */
|
||||
|
||||
spin_lock_irq(instance->host_lock);
|
||||
wd33c93_host_reset(cmd);
|
||||
spin_unlock_irq(instance->host_lock);
|
||||
|
||||
return SUCCESS;
|
||||
}
|
||||
|
||||
static struct scsi_host_template gvp11_scsi_template = {
|
||||
.module = THIS_MODULE,
|
||||
.name = "GVP Series II SCSI",
|
||||
.show_info = wd33c93_show_info,
|
||||
.write_info = wd33c93_write_info,
|
||||
.proc_name = "GVP11",
|
||||
.queuecommand = wd33c93_queuecommand,
|
||||
.eh_abort_handler = wd33c93_abort,
|
||||
.eh_bus_reset_handler = gvp11_bus_reset,
|
||||
.eh_host_reset_handler = wd33c93_host_reset,
|
||||
.can_queue = CAN_QUEUE,
|
||||
.this_id = 7,
|
||||
.sg_tablesize = SG_ALL,
|
||||
.cmd_per_lun = CMD_PER_LUN,
|
||||
.use_clustering = DISABLE_CLUSTERING
|
||||
};
|
||||
|
||||
static int check_wd33c93(struct gvp11_scsiregs *regs)
|
||||
{
|
||||
#ifdef CHECK_WD33C93
|
||||
volatile unsigned char *sasr_3393, *scmd_3393;
|
||||
unsigned char save_sasr;
|
||||
unsigned char q, qq;
|
||||
|
||||
/*
|
||||
* These darn GVP boards are a problem - it can be tough to tell
|
||||
* whether or not they include a SCSI controller. This is the
|
||||
* ultimate Yet-Another-GVP-Detection-Hack in that it actually
|
||||
* probes for a WD33c93 chip: If we find one, it's extremely
|
||||
* likely that this card supports SCSI, regardless of Product_
|
||||
* Code, Board_Size, etc.
|
||||
*/
|
||||
|
||||
/* Get pointers to the presumed register locations and save contents */
|
||||
|
||||
sasr_3393 = ®s->SASR;
|
||||
scmd_3393 = ®s->SCMD;
|
||||
save_sasr = *sasr_3393;
|
||||
|
||||
/* First test the AuxStatus Reg */
|
||||
|
||||
q = *sasr_3393; /* read it */
|
||||
if (q & 0x08) /* bit 3 should always be clear */
|
||||
return -ENODEV;
|
||||
*sasr_3393 = WD_AUXILIARY_STATUS; /* setup indirect address */
|
||||
if (*sasr_3393 == WD_AUXILIARY_STATUS) { /* shouldn't retain the write */
|
||||
*sasr_3393 = save_sasr; /* Oops - restore this byte */
|
||||
return -ENODEV;
|
||||
}
|
||||
if (*sasr_3393 != q) { /* should still read the same */
|
||||
*sasr_3393 = save_sasr; /* Oops - restore this byte */
|
||||
return -ENODEV;
|
||||
}
|
||||
if (*scmd_3393 != q) /* and so should the image at 0x1f */
|
||||
return -ENODEV;
|
||||
|
||||
/*
|
||||
* Ok, we probably have a wd33c93, but let's check a few other places
|
||||
* for good measure. Make sure that this works for both 'A and 'B
|
||||
* chip versions.
|
||||
*/
|
||||
|
||||
*sasr_3393 = WD_SCSI_STATUS;
|
||||
q = *scmd_3393;
|
||||
*sasr_3393 = WD_SCSI_STATUS;
|
||||
*scmd_3393 = ~q;
|
||||
*sasr_3393 = WD_SCSI_STATUS;
|
||||
qq = *scmd_3393;
|
||||
*sasr_3393 = WD_SCSI_STATUS;
|
||||
*scmd_3393 = q;
|
||||
if (qq != q) /* should be read only */
|
||||
return -ENODEV;
|
||||
*sasr_3393 = 0x1e; /* this register is unimplemented */
|
||||
q = *scmd_3393;
|
||||
*sasr_3393 = 0x1e;
|
||||
*scmd_3393 = ~q;
|
||||
*sasr_3393 = 0x1e;
|
||||
qq = *scmd_3393;
|
||||
*sasr_3393 = 0x1e;
|
||||
*scmd_3393 = q;
|
||||
if (qq != q || qq != 0xff) /* should be read only, all 1's */
|
||||
return -ENODEV;
|
||||
*sasr_3393 = WD_TIMEOUT_PERIOD;
|
||||
q = *scmd_3393;
|
||||
*sasr_3393 = WD_TIMEOUT_PERIOD;
|
||||
*scmd_3393 = ~q;
|
||||
*sasr_3393 = WD_TIMEOUT_PERIOD;
|
||||
qq = *scmd_3393;
|
||||
*sasr_3393 = WD_TIMEOUT_PERIOD;
|
||||
*scmd_3393 = q;
|
||||
if (qq != (~q & 0xff)) /* should be read/write */
|
||||
return -ENODEV;
|
||||
#endif /* CHECK_WD33C93 */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gvp11_probe(struct zorro_dev *z, const struct zorro_device_id *ent)
|
||||
{
|
||||
struct Scsi_Host *instance;
|
||||
unsigned long address;
|
||||
int error;
|
||||
unsigned int epc;
|
||||
unsigned int default_dma_xfer_mask;
|
||||
struct gvp11_hostdata *hdata;
|
||||
struct gvp11_scsiregs *regs;
|
||||
wd33c93_regs wdregs;
|
||||
|
||||
default_dma_xfer_mask = ent->driver_data;
|
||||
|
||||
/*
|
||||
* Rumors state that some GVP ram boards use the same product
|
||||
* code as the SCSI controllers. Therefore if the board-size
|
||||
* is not 64KB we assume it is a ram board and bail out.
|
||||
*/
|
||||
if (zorro_resource_len(z) != 0x10000)
|
||||
return -ENODEV;
|
||||
|
||||
address = z->resource.start;
|
||||
if (!request_mem_region(address, 256, "wd33c93"))
|
||||
return -EBUSY;
|
||||
|
||||
regs = ZTWO_VADDR(address);
|
||||
|
||||
error = check_wd33c93(regs);
|
||||
if (error)
|
||||
goto fail_check_or_alloc;
|
||||
|
||||
instance = scsi_host_alloc(&gvp11_scsi_template,
|
||||
sizeof(struct gvp11_hostdata));
|
||||
if (!instance) {
|
||||
error = -ENOMEM;
|
||||
goto fail_check_or_alloc;
|
||||
}
|
||||
|
||||
instance->irq = IRQ_AMIGA_PORTS;
|
||||
instance->unique_id = z->slotaddr;
|
||||
|
||||
regs->secret2 = 1;
|
||||
regs->secret1 = 0;
|
||||
regs->secret3 = 15;
|
||||
while (regs->CNTR & GVP11_DMAC_BUSY)
|
||||
;
|
||||
regs->CNTR = 0;
|
||||
regs->BANK = 0;
|
||||
|
||||
wdregs.SASR = ®s->SASR;
|
||||
wdregs.SCMD = ®s->SCMD;
|
||||
|
||||
hdata = shost_priv(instance);
|
||||
if (gvp11_xfer_mask)
|
||||
hdata->wh.dma_xfer_mask = gvp11_xfer_mask;
|
||||
else
|
||||
hdata->wh.dma_xfer_mask = default_dma_xfer_mask;
|
||||
|
||||
hdata->wh.no_sync = 0xff;
|
||||
hdata->wh.fast = 0;
|
||||
hdata->wh.dma_mode = CTRL_DMA;
|
||||
hdata->regs = regs;
|
||||
|
||||
/*
|
||||
* Check for 14MHz SCSI clock
|
||||
*/
|
||||
epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000);
|
||||
wd33c93_init(instance, wdregs, dma_setup, dma_stop,
|
||||
(epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10
|
||||
: WD33C93_FS_12_15);
|
||||
|
||||
error = request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED,
|
||||
"GVP11 SCSI", instance);
|
||||
if (error)
|
||||
goto fail_irq;
|
||||
|
||||
regs->CNTR = GVP11_DMAC_INT_ENABLE;
|
||||
|
||||
error = scsi_add_host(instance, NULL);
|
||||
if (error)
|
||||
goto fail_host;
|
||||
|
||||
zorro_set_drvdata(z, instance);
|
||||
scsi_scan_host(instance);
|
||||
return 0;
|
||||
|
||||
fail_host:
|
||||
free_irq(IRQ_AMIGA_PORTS, instance);
|
||||
fail_irq:
|
||||
scsi_host_put(instance);
|
||||
fail_check_or_alloc:
|
||||
release_mem_region(address, 256);
|
||||
return error;
|
||||
}
|
||||
|
||||
static void gvp11_remove(struct zorro_dev *z)
|
||||
{
|
||||
struct Scsi_Host *instance = zorro_get_drvdata(z);
|
||||
struct gvp11_hostdata *hdata = shost_priv(instance);
|
||||
|
||||
hdata->regs->CNTR = 0;
|
||||
scsi_remove_host(instance);
|
||||
free_irq(IRQ_AMIGA_PORTS, instance);
|
||||
scsi_host_put(instance);
|
||||
release_mem_region(z->resource.start, 256);
|
||||
}
|
||||
|
||||
/*
|
||||
* This should (hopefully) be the correct way to identify
|
||||
* all the different GVP SCSI controllers (except for the
|
||||
* SERIES I though).
|
||||
*/
|
||||
|
||||
static struct zorro_device_id gvp11_zorro_tbl[] = {
|
||||
{ ZORRO_PROD_GVP_COMBO_030_R3_SCSI, ~0x00ffffff },
|
||||
{ ZORRO_PROD_GVP_SERIES_II, ~0x00ffffff },
|
||||
{ ZORRO_PROD_GVP_GFORCE_030_SCSI, ~0x01ffffff },
|
||||
{ ZORRO_PROD_GVP_A530_SCSI, ~0x01ffffff },
|
||||
{ ZORRO_PROD_GVP_COMBO_030_R4_SCSI, ~0x01ffffff },
|
||||
{ ZORRO_PROD_GVP_A1291, ~0x07ffffff },
|
||||
{ ZORRO_PROD_GVP_GFORCE_040_SCSI_1, ~0x07ffffff },
|
||||
{ 0 }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(zorro, gvp11_zorro_tbl);
|
||||
|
||||
static struct zorro_driver gvp11_driver = {
|
||||
.name = "gvp11",
|
||||
.id_table = gvp11_zorro_tbl,
|
||||
.probe = gvp11_probe,
|
||||
.remove = gvp11_remove,
|
||||
};
|
||||
|
||||
static int __init gvp11_init(void)
|
||||
{
|
||||
return zorro_register_driver(&gvp11_driver);
|
||||
}
|
||||
module_init(gvp11_init);
|
||||
|
||||
static void __exit gvp11_exit(void)
|
||||
{
|
||||
zorro_unregister_driver(&gvp11_driver);
|
||||
}
|
||||
module_exit(gvp11_exit);
|
||||
|
||||
MODULE_DESCRIPTION("GVP Series II SCSI");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Add table
Add a link
Reference in a new issue