Fixed MTP to work with TWRP

drivers/usb/musb/musb_virthub.c

@@ -0,0 +1,457 @@
+/*
+ * MUSB OTG driver virtual root hub support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+
+#include <asm/unaligned.h>
+
+#include "musb_core.h"
+
+void musb_host_finish_resume(struct work_struct *work)
+{
+	struct musb *musb;
+	unsigned long flags;
+	u8 power;
+
+	musb = container_of(work, struct musb, finish_resume_work.work);
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	power = musb_readb(musb->mregs, MUSB_POWER);
+	power &= ~MUSB_POWER_RESUME;
+	dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
+		power);
+	musb_writeb(musb->mregs, MUSB_POWER, power);
+
+	/*
+	 * ISSUE:  DaVinci (RTL 1.300) disconnects after
+	 * resume of high speed peripherals (but not full
+	 * speed ones).
+	 */
+	musb->is_active = 1;
+	musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME);
+	musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+	usb_hcd_poll_rh_status(musb->hcd);
+	/* NOTE: it might really be A_WAIT_BCON ... */
+	musb->xceiv->state = OTG_STATE_A_HOST;
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+void musb_port_suspend(struct musb *musb, bool do_suspend)
+{
+	struct usb_otg	*otg = musb->xceiv->otg;
+	u8		power;
+	void __iomem	*mbase = musb->mregs;
+
+	if (!is_host_active(musb))
+		return;
+
+	/* NOTE:  this doesn't necessarily put PHY into low power mode,
+	 * turning off its clock; that's a function of PHY integration and
+	 * MUSB_POWER_ENSUSPEND.  PHY may need a clock (sigh) to detect
+	 * SE0 changing to connect (J) or wakeup (K) states.
+	 */
+	power = musb_readb(mbase, MUSB_POWER);
+	if (do_suspend) {
+		int retries = 10000;
+
+		power &= ~MUSB_POWER_RESUME;
+		power |= MUSB_POWER_SUSPENDM;
+		musb_writeb(mbase, MUSB_POWER, power);
+
+		/* Needed for OPT A tests */
+		power = musb_readb(mbase, MUSB_POWER);
+		while (power & MUSB_POWER_SUSPENDM) {
+			power = musb_readb(mbase, MUSB_POWER);
+			if (retries-- < 1)
+				break;
+		}
+
+		dev_dbg(musb->controller, "Root port suspended, power %02x\n", power);
+
+		musb->port1_status |= USB_PORT_STAT_SUSPEND;
+		switch (musb->xceiv->state) {
+		case OTG_STATE_A_HOST:
+			musb->xceiv->state = OTG_STATE_A_SUSPEND;
+			musb->is_active = otg->host->b_hnp_enable;
+			if (musb->is_active)
+				mod_timer(&musb->otg_timer, jiffies
+					+ msecs_to_jiffies(
+						OTG_TIME_A_AIDL_BDIS));
+			musb_platform_try_idle(musb, 0);
+			break;
+		case OTG_STATE_B_HOST:
+			musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
+			musb->is_active = otg->host->b_hnp_enable;
+			musb_platform_try_idle(musb, 0);
+			break;
+		default:
+			dev_dbg(musb->controller, "bogus rh suspend? %s\n",
+				usb_otg_state_string(musb->xceiv->state));
+		}
+	} else if (power & MUSB_POWER_SUSPENDM) {
+		power &= ~MUSB_POWER_SUSPENDM;
+		power |= MUSB_POWER_RESUME;
+		musb_writeb(mbase, MUSB_POWER, power);
+
+		dev_dbg(musb->controller, "Root port resuming, power %02x\n", power);
+
+		/* later, GetPortStatus will stop RESUME signaling */
+		musb->port1_status |= MUSB_PORT_STAT_RESUME;
+		schedule_delayed_work(&musb->finish_resume_work,
+				      msecs_to_jiffies(USB_RESUME_TIMEOUT));
+	}
+}
+
+void musb_port_reset(struct musb *musb, bool do_reset)
+{
+	u8		power;
+	void __iomem	*mbase = musb->mregs;
+
+	if (musb->xceiv->state == OTG_STATE_B_IDLE) {
+		dev_dbg(musb->controller, "HNP: Returning from HNP; no hub reset from b_idle\n");
+		musb->port1_status &= ~USB_PORT_STAT_RESET;
+		return;
+	}
+
+	if (!is_host_active(musb))
+		return;
+
+	/* NOTE:  caller guarantees it will turn off the reset when
+	 * the appropriate amount of time has passed
+	 */
+	power = musb_readb(mbase, MUSB_POWER);
+	if (do_reset) {
+		/*
+		 * If RESUME is set, we must make sure it stays minimum 20 ms.
+		 * Then we must clear RESUME and wait a bit to let musb start
+		 * generating SOFs. If we don't do this, OPT HS A 6.8 tests
+		 * fail with "Error! Did not receive an SOF before suspend
+		 * detected".
+		 */
+		if (power &  MUSB_POWER_RESUME) {
+			long remain = (unsigned long) musb->rh_timer - jiffies;
+
+			if (musb->rh_timer > 0 && remain > 0) {
+				/* take into account the minimum delay after resume */
+				schedule_delayed_work(
+					&musb->deassert_reset_work, remain);
+				return;
+			}
+
+			musb_writeb(mbase, MUSB_POWER,
+				    power & ~MUSB_POWER_RESUME);
+
+			/* Give the core 1 ms to clear MUSB_POWER_RESUME */
+			schedule_delayed_work(&musb->deassert_reset_work,
+					      msecs_to_jiffies(1));
+			return;
+		}
+
+		power &= 0xf0;
+		musb_writeb(mbase, MUSB_POWER,
+				power | MUSB_POWER_RESET);
+
+		musb->port1_status |= USB_PORT_STAT_RESET;
+		musb->port1_status &= ~USB_PORT_STAT_ENABLE;
+		schedule_delayed_work(&musb->deassert_reset_work,
+				      msecs_to_jiffies(50));
+	} else {
+		dev_dbg(musb->controller, "root port reset stopped\n");
+		musb_writeb(mbase, MUSB_POWER,
+				power & ~MUSB_POWER_RESET);
+
+		power = musb_readb(mbase, MUSB_POWER);
+		if (power & MUSB_POWER_HSMODE) {
+			dev_dbg(musb->controller, "high-speed device connected\n");
+			musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
+		}
+
+		musb->port1_status &= ~USB_PORT_STAT_RESET;
+		musb->port1_status |= USB_PORT_STAT_ENABLE
+					| (USB_PORT_STAT_C_RESET << 16)
+					| (USB_PORT_STAT_C_ENABLE << 16);
+		usb_hcd_poll_rh_status(musb->hcd);
+
+		musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+	}
+}
+
+void musb_root_disconnect(struct musb *musb)
+{
+	struct usb_otg	*otg = musb->xceiv->otg;
+
+	musb->port1_status = USB_PORT_STAT_POWER
+			| (USB_PORT_STAT_C_CONNECTION << 16);
+
+	usb_hcd_poll_rh_status(musb->hcd);
+	musb->is_active = 0;
+
+	switch (musb->xceiv->state) {
+	case OTG_STATE_A_SUSPEND:
+		if (otg->host->b_hnp_enable) {
+			musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
+			musb->g.is_a_peripheral = 1;
+			break;
+		}
+		/* FALLTHROUGH */
+	case OTG_STATE_A_HOST:
+		musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		musb->xceiv->state = OTG_STATE_B_IDLE;
+		break;
+	default:
+		dev_dbg(musb->controller, "host disconnect (%s)\n",
+			usb_otg_state_string(musb->xceiv->state));
+	}
+}
+
+
+/*---------------------------------------------------------------------*/
+
+/* Caller may or may not hold musb->lock */
+int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	int		retval = 0;
+
+	/* called in_irq() via usb_hcd_poll_rh_status() */
+	if (musb->port1_status & 0xffff0000) {
+		*buf = 0x02;
+		retval = 1;
+	}
+	return retval;
+}
+
+static int musb_has_gadget(struct musb *musb)
+{
+	/*
+	 * In host-only mode we start a connection right away. In OTG mode
+	 * we have to wait until we loaded a gadget. We don't really need a
+	 * gadget if we operate as a host but we should not start a session
+	 * as a device without a gadget or else we explode.
+	 */
+#ifdef CONFIG_USB_MUSB_HOST
+	return 1;
+#else
+	if (musb->port_mode == MUSB_PORT_MODE_HOST)
+		return 1;
+	return musb->g.dev.driver != NULL;
+#endif
+}
+
+int musb_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	u32		temp;
+	int		retval = 0;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) {
+		spin_unlock_irqrestore(&musb->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	/* hub features:  always zero, setting is a NOP
+	 * port features: reported, sometimes updated when host is active
+	 * no indicators
+	 */
+	switch (typeReq) {
+	case ClearHubFeature:
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if ((wIndex & 0xff) != 1)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			musb_port_suspend(musb, false);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (!hcd->self.is_b_host)
+				musb_platform_set_vbus(musb, 0);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+		case USB_PORT_FEAT_C_RESET:
+		case USB_PORT_FEAT_C_SUSPEND:
+			break;
+		default:
+			goto error;
+		}
+		dev_dbg(musb->controller, "clear feature %d\n", wValue);
+		musb->port1_status &= ~(1 << wValue);
+		break;
+	case GetHubDescriptor:
+		{
+		struct usb_hub_descriptor *desc = (void *)buf;
+
+		desc->bDescLength = 9;
+		desc->bDescriptorType = 0x29;
+		desc->bNbrPorts = 1;
+		desc->wHubCharacteristics = cpu_to_le16(
+				  0x0001	/* per-port power switching */
+				| 0x0010	/* no overcurrent reporting */
+				);
+		desc->bPwrOn2PwrGood = 5;	/* msec/2 */
+		desc->bHubContrCurrent = 0;
+
+		/* workaround bogus struct definition */
+		desc->u.hs.DeviceRemovable[0] = 0x02;	/* port 1 */
+		desc->u.hs.DeviceRemovable[1] = 0xff;
+		}
+		break;
+	case GetHubStatus:
+		temp = 0;
+		*(__le32 *) buf = cpu_to_le32(temp);
+		break;
+	case GetPortStatus:
+		if (wIndex != 1)
+			goto error;
+
+		put_unaligned(cpu_to_le32(musb->port1_status
+					& ~MUSB_PORT_STAT_RESUME),
+				(__le32 *) buf);
+
+		/* port change status is more interesting */
+		dev_dbg(musb->controller, "port status %08x\n",
+				musb->port1_status);
+		break;
+	case SetPortFeature:
+		if ((wIndex & 0xff) != 1)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			/* NOTE: this controller has a strange state machine
+			 * that involves "requesting sessions" according to
+			 * magic side effects from incompletely-described
+			 * rules about startup...
+			 *
+			 * This call is what really starts the host mode; be
+			 * very careful about side effects if you reorder any
+			 * initialization logic, e.g. for OTG, or change any
+			 * logic relating to VBUS power-up.
+			 */
+			if (!hcd->self.is_b_host && musb_has_gadget(musb))
+				musb_start(musb);
+			break;
+		case USB_PORT_FEAT_RESET:
+			musb_port_reset(musb, true);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			musb_port_suspend(musb, true);
+			break;
+		case USB_PORT_FEAT_TEST:
+			if (unlikely(is_host_active(musb)))
+				goto error;
+
+			wIndex >>= 8;
+			switch (wIndex) {
+			case 1:
+				pr_debug("TEST_J\n");
+				temp = MUSB_TEST_J;
+				break;
+			case 2:
+				pr_debug("TEST_K\n");
+				temp = MUSB_TEST_K;
+				break;
+			case 3:
+				pr_debug("TEST_SE0_NAK\n");
+				temp = MUSB_TEST_SE0_NAK;
+				break;
+			case 4:
+				pr_debug("TEST_PACKET\n");
+				temp = MUSB_TEST_PACKET;
+				musb_load_testpacket(musb);
+				break;
+			case 5:
+				pr_debug("TEST_FORCE_ENABLE\n");
+				temp = MUSB_TEST_FORCE_HOST
+					| MUSB_TEST_FORCE_HS;
+
+				musb_writeb(musb->mregs, MUSB_DEVCTL,
+						MUSB_DEVCTL_SESSION);
+				break;
+			case 6:
+				pr_debug("TEST_FIFO_ACCESS\n");
+				temp = MUSB_TEST_FIFO_ACCESS;
+				break;
+			default:
+				goto error;
+			}
+			musb_writeb(musb->mregs, MUSB_TESTMODE, temp);
+			break;
+		default:
+			goto error;
+		}
+		dev_dbg(musb->controller, "set feature %d\n", wValue);
+		musb->port1_status |= 1 << wValue;
+		break;
+
+	default:
+error:
+		/* "protocol stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return retval;
+}