Fixed MTP to work with TWRP

net/irda/Kconfig

@@ -0,0 +1,96 @@
+#
+# IrDA protocol configuration
+#
+
+menuconfig IRDA
+	depends on NET && !S390
+	tristate "IrDA (infrared) subsystem support"
+	select CRC_CCITT
+	---help---
+	  Say Y here if you want to build support for the IrDA (TM) protocols.
+	  The Infrared Data Associations (tm) specifies standards for wireless
+	  infrared communication and is supported by most laptops and PDA's.
+
+	  To use Linux support for the IrDA (tm) protocols, you will also need
+	  some user-space utilities like irattach.  For more information, see
+	  the file <file:Documentation/networking/irda.txt>.  You also want to
+	  read the IR-HOWTO, available at
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  If you want to exchange bits of data (vCal, vCard) with a PDA, you
+	  will need to install some OBEX application, such as OpenObex :
+	  <http://sourceforge.net/projects/openobex/>
+
+	  To compile this support as a module, choose M here: the module will
+	  be called irda.
+
+comment "IrDA protocols"
+	depends on IRDA
+
+source "net/irda/irlan/Kconfig"
+
+source "net/irda/irnet/Kconfig"
+
+source "net/irda/ircomm/Kconfig"
+
+config IRDA_ULTRA
+	bool "Ultra (connectionless) protocol"
+	depends on IRDA
+	help
+	  Say Y here to support the connectionless Ultra IRDA protocol.
+	  Ultra allows to exchange data over IrDA with really simple devices
+	  (watch, beacon) without the overhead of the IrDA protocol (no handshaking,
+	  no management frames, simple fixed header).
+	  Ultra is available as a special socket : socket(AF_IRDA, SOCK_DGRAM, 1);
+
+comment "IrDA options"
+	depends on IRDA
+
+config IRDA_CACHE_LAST_LSAP
+	bool "Cache last LSAP"
+	depends on IRDA
+	help
+	  Say Y here if you want IrLMP to cache the last LSAP used.  This
+	  makes sense since most frames will be sent/received on the same
+	  connection.  Enabling this option will save a hash-lookup per frame.
+
+	  If unsure, say Y.
+
+config IRDA_FAST_RR
+	bool "Fast RRs (low latency)"
+	depends on IRDA
+	---help---
+	  Say Y here is you want IrLAP to send fast RR (Receive Ready) frames
+	  when acting as a primary station.
+	  Disabling this option will make latency over IrDA very bad. Enabling
+	  this option will make the IrDA stack send more packet than strictly
+	  necessary, thus reduce your battery life (but not that much).
+
+	  Fast RR will make IrLAP send out a RR frame immediately when
+	  receiving a frame if its own transmit queue is currently empty. This
+	  will give a lot of speed improvement when receiving much data since
+	  the secondary station will not have to wait the max. turn around
+	  time (usually 500ms) before it is allowed to transmit the next time.
+	  If the transmit queue of the secondary is also empty, the primary will
+	  start backing-off before sending another RR frame, waiting longer
+	  each time until the back-off reaches the max. turn around time.
+	  This back-off increase in controlled via
+	  /proc/sys/net/irda/fast_poll_increase
+
+	  If unsure, say Y.
+
+config IRDA_DEBUG
+	bool "Debug information"
+	depends on IRDA
+	help
+	  Say Y here if you want the IrDA subsystem to write debug information
+	  to your syslog. You can change the debug level in
+	  /proc/sys/net/irda/debug .
+	  When this option is enabled, the IrDA also perform many extra internal
+	  verifications which will usually prevent the kernel to crash in case of
+	  bugs.
+
+	  If unsure, say Y (since it makes it easier to find the bugs).
+
+source "drivers/net/irda/Kconfig"
+