Fixed MTP to work with TWRP

sound/soc/tegra/Kconfig

@@ -0,0 +1,130 @@
+config SND_SOC_TEGRA
+	tristate "SoC Audio for the Tegra System-on-Chip"
+	depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
+	depends on COMMON_CLK
+	depends on RESET_CONTROLLER
+	select REGMAP_MMIO
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	help
+	  Say Y or M here if you want support for SoC audio on Tegra.
+
+config SND_SOC_TEGRA20_AC97
+	tristate
+	depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
+	select SND_SOC_AC97_BUS
+	select SND_SOC_TEGRA20_DAS
+	help
+	  Say Y or M if you want to add support for codecs attached to the
+	  Tegra20 AC97 interface. You will also need to select the individual
+	  machine drivers to support below.
+
+config SND_SOC_TEGRA20_DAS
+	tristate
+	depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
+	help
+	  Say Y or M if you want to add support for the Tegra20 DAS module.
+	  You will also need to select the individual machine drivers to
+	  support below.
+
+config SND_SOC_TEGRA20_I2S
+	tristate
+	depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
+	select SND_SOC_TEGRA20_DAS
+	help
+	  Say Y or M if you want to add support for codecs attached to the
+	  Tegra20 I2S interface. You will also need to select the individual
+	  machine drivers to support below.
+
+config SND_SOC_TEGRA20_SPDIF
+	tristate
+	depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
+	default m
+	help
+	  Say Y or M if you want to add support for the Tegra20 SPDIF interface.
+	  You will also need to select the individual machine drivers to support
+	  below.
+
+config SND_SOC_TEGRA30_AHUB
+	tristate
+	depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC
+	help
+	  Say Y or M if you want to add support for the Tegra20 AHUB module.
+	  You will also need to select the individual machine drivers to
+	  support below.
+
+config SND_SOC_TEGRA30_I2S
+	tristate
+	depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC
+	select SND_SOC_TEGRA30_AHUB
+	help
+	  Say Y or M if you want to add support for codecs attached to the
+	  Tegra30 I2S interface. You will also need to select the individual
+	  machine drivers to support below.
+
+config SND_SOC_TEGRA_RT5640
+	tristate "SoC Audio support for Tegra boards using an RT5640 codec"
+	depends on SND_SOC_TEGRA && I2C && GPIOLIB
+	select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
+	select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
+	select SND_SOC_RT5640
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the RT5640 codec, such as Dalmore.
+
+config SND_SOC_TEGRA_WM8753
+	tristate "SoC Audio support for Tegra boards using a WM8753 codec"
+	depends on SND_SOC_TEGRA && I2C && GPIOLIB
+	select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
+	select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
+	select SND_SOC_WM8753
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the WM8753 codec, such as Whistler.
+
+config SND_SOC_TEGRA_WM8903
+	tristate "SoC Audio support for Tegra boards using a WM8903 codec"
+	depends on SND_SOC_TEGRA && I2C && GPIOLIB
+	select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
+	select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
+	select SND_SOC_WM8903
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the WM8093 codec. Currently, the supported boards are
+	  Harmony, Ventana, Seaboard, Kaen, and Aebl.
+
+config SND_SOC_TEGRA_WM9712
+	tristate "SoC Audio support for Tegra boards using a WM9712 codec"
+	depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC && GPIOLIB
+	select SND_SOC_TEGRA20_AC97
+	select SND_SOC_WM9712
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the WM9712 (or compatible) codec.
+
+config SND_SOC_TEGRA_TRIMSLICE
+	tristate "SoC Audio support for TrimSlice board"
+	depends on SND_SOC_TEGRA && I2C
+	select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
+	select SND_SOC_TLV320AIC23_I2C
+	help
+	  Say Y or M here if you want to add support for SoC audio on the
+	  TrimSlice platform.
+
+config SND_SOC_TEGRA_ALC5632
+	tristate "SoC Audio support for Tegra boards using an ALC5632 codec"
+	depends on SND_SOC_TEGRA && I2C && GPIOLIB
+	select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
+	select SND_SOC_ALC5632
+	help
+	  Say Y or M here if you want to add support for SoC audio on the
+	  Toshiba AC100 netbook.
+
+config SND_SOC_TEGRA_MAX98090
+	tristate "SoC Audio support for Tegra boards using a MAX98090 codec"
+	depends on SND_SOC_TEGRA && I2C && GPIOLIB
+	select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
+	select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
+	select SND_SOC_MAX98090
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the MAX98090 codec, such as Venice2.