mirror of
https://github.com/RaySollium99/picodrive.git
synced 2025-09-05 07:17:45 -04:00
initial import
git-svn-id: file:///home/notaz/opt/svn/PicoDrive@2 be3aeb3a-fb24-0410-a615-afba39da0efa
This commit is contained in:
notaz
parent
2cadbd5e56
commit
cc68a136aa
341 changed files with 180839 additions and 0 deletions
347
Pico/sound/sn76496.c
Normal file
347
Pico/sound/sn76496.c
Normal file
|
|
@ -0,0 +1,347 @@
|
|||
/***************************************************************************
|
||||
|
||||
sn76496.c
|
||||
|
||||
Routines to emulate the Texas Instruments SN76489 / SN76496 programmable
|
||||
tone /noise generator. Also known as (or at least compatible with) TMS9919.
|
||||
|
||||
Noise emulation is not accurate due to lack of documentation. The noise
|
||||
generator uses a shift register with a XOR-feedback network, but the exact
|
||||
layout is unknown. It can be set for either period or white noise; again,
|
||||
the details are unknown.
|
||||
|
||||
28/03/2005 : Sebastien Chevalier
|
||||
Update th SN76496Write func, according to SN76489 doc found on SMSPower.
|
||||
- On write with 0x80 set to 0, when LastRegister is other then TONE,
|
||||
the function is similar than update with 0x80 set to 1
|
||||
***************************************************************************/
|
||||
|
||||
#ifndef __GNUC__
|
||||
#pragma warning (disable:4244)
|
||||
#endif
|
||||
|
||||
#include "sn76496.h"
|
||||
|
||||
#define MAX_OUTPUT 0x47ff // was 0x7fff
|
||||
|
||||
#define STEP 0x10000
|
||||
|
||||
|
||||
/* Formulas for noise generator */
|
||||
/* bit0 = output */
|
||||
|
||||
/* noise feedback for white noise mode (verified on real SN76489 by John Kortink) */
|
||||
#define FB_WNOISE 0x14002 /* (16bits) bit16 = bit0(out) ^ bit2 ^ bit15 */
|
||||
|
||||
/* noise feedback for periodic noise mode */
|
||||
//#define FB_PNOISE 0x10000 /* 16bit rorate */
|
||||
#define FB_PNOISE 0x08000 /* JH 981127 - fixes Do Run Run */
|
||||
|
||||
/*
|
||||
0x08000 is definitely wrong. The Master System conversion of Marble Madness
|
||||
uses periodic noise as a baseline. With a 15-bit rotate, the bassline is
|
||||
out of tune.
|
||||
The 16-bit rotate has been confirmed against a real PAL Sega Master System 2.
|
||||
Hope that helps the System E stuff, more news on the PSG as and when!
|
||||
*/
|
||||
|
||||
/* noise generator start preset (for periodic noise) */
|
||||
#define NG_PRESET 0x0f35
|
||||
|
||||
|
||||
struct SN76496
|
||||
{
|
||||
//sound_stream * Channel;
|
||||
int SampleRate;
|
||||
unsigned int UpdateStep;
|
||||
int VolTable[16]; /* volume table */
|
||||
int Register[8]; /* registers */
|
||||
int LastRegister; /* last register written */
|
||||
int Volume[4]; /* volume of voice 0-2 and noise */
|
||||
unsigned int RNG; /* noise generator */
|
||||
int NoiseFB; /* noise feedback mask */
|
||||
int Period[4];
|
||||
int Count[4];
|
||||
int Output[4];
|
||||
int pad[1];
|
||||
};
|
||||
|
||||
static struct SN76496 ono_sn; // one and only SN76496
|
||||
int *sn76496_regs;
|
||||
|
||||
//static
|
||||
void SN76496Write(int data)
|
||||
{
|
||||
struct SN76496 *R = &ono_sn;
|
||||
int n;
|
||||
|
||||
|
||||
/* update the output buffer before changing the registers */
|
||||
//stream_update(R->Channel,0);
|
||||
|
||||
if (data & 0x80)
|
||||
{
|
||||
int r = (data & 0x70) >> 4;
|
||||
int c = r/2;
|
||||
|
||||
R->LastRegister = r;
|
||||
R->Register[r] = (R->Register[r] & 0x3f0) | (data & 0x0f);
|
||||
switch (r)
|
||||
{
|
||||
case 0: /* tone 0 : frequency */
|
||||
case 2: /* tone 1 : frequency */
|
||||
case 4: /* tone 2 : frequency */
|
||||
R->Period[c] = R->UpdateStep * R->Register[r];
|
||||
if (R->Period[c] == 0) R->Period[c] = R->UpdateStep;
|
||||
if (r == 4)
|
||||
{
|
||||
/* update noise shift frequency */
|
||||
if ((R->Register[6] & 0x03) == 0x03)
|
||||
R->Period[3] = 2 * R->Period[2];
|
||||
}
|
||||
break;
|
||||
case 1: /* tone 0 : volume */
|
||||
case 3: /* tone 1 : volume */
|
||||
case 5: /* tone 2 : volume */
|
||||
case 7: /* noise : volume */
|
||||
R->Volume[c] = R->VolTable[data & 0x0f];
|
||||
break;
|
||||
case 6: /* noise : frequency, mode */
|
||||
{
|
||||
int n = R->Register[6];
|
||||
R->NoiseFB = (n & 4) ? FB_WNOISE : FB_PNOISE;
|
||||
n &= 3;
|
||||
/* N/512,N/1024,N/2048,Tone #3 output */
|
||||
R->Period[3] = ((n&3) == 3) ? 2 * R->Period[2] : (R->UpdateStep << (5+(n&3)));
|
||||
|
||||
/* reset noise shifter */
|
||||
R->RNG = NG_PRESET;
|
||||
R->Output[3] = R->RNG & 1;
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
int r = R->LastRegister;
|
||||
int c = r/2;
|
||||
|
||||
switch (r)
|
||||
{
|
||||
case 0: /* tone 0 : frequency */
|
||||
case 2: /* tone 1 : frequency */
|
||||
case 4: /* tone 2 : frequency */
|
||||
R->Register[r] = (R->Register[r] & 0x0f) | ((data & 0x3f) << 4);
|
||||
R->Period[c] = R->UpdateStep * R->Register[r];
|
||||
if (R->Period[c] == 0) R->Period[c] = R->UpdateStep;
|
||||
if (r == 4)
|
||||
{
|
||||
/* update noise shift frequency */
|
||||
if ((R->Register[6] & 0x03) == 0x03)
|
||||
R->Period[3] = 2 * R->Period[2];
|
||||
}
|
||||
break;
|
||||
case 1: /* tone 0 : volume */
|
||||
case 3: /* tone 1 : volume */
|
||||
case 5: /* tone 2 : volume */
|
||||
case 7: /* noise : volume */
|
||||
R->Volume[c] = R->VolTable[data & 0x0f];
|
||||
R->Register[r] = (R->Register[r] & 0x3f0) | (data & 0x0f);
|
||||
break;
|
||||
case 6: /* noise : frequency, mode */
|
||||
{
|
||||
R->Register[r] = (R->Register[r] & 0x3f0) | (data & 0x0f);
|
||||
n = R->Register[6];
|
||||
R->NoiseFB = (n & 4) ? FB_WNOISE : FB_PNOISE;
|
||||
n &= 3;
|
||||
/* N/512,N/1024,N/2048,Tone #3 output */
|
||||
R->Period[3] = ((n&3) == 3) ? 2 * R->Period[2] : (R->UpdateStep << (5+(n&3)));
|
||||
|
||||
/* reset noise shifter */
|
||||
R->RNG = NG_PRESET;
|
||||
R->Output[3] = R->RNG & 1;
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
WRITE8_HANDLER( SN76496_0_w ) { SN76496Write(0,data); }
|
||||
WRITE8_HANDLER( SN76496_1_w ) { SN76496Write(1,data); }
|
||||
WRITE8_HANDLER( SN76496_2_w ) { SN76496Write(2,data); }
|
||||
WRITE8_HANDLER( SN76496_3_w ) { SN76496Write(3,data); }
|
||||
WRITE8_HANDLER( SN76496_4_w ) { SN76496Write(4,data); }
|
||||
*/
|
||||
|
||||
//static
|
||||
void SN76496Update(short *buffer,int length,int stereo)
|
||||
{
|
||||
int i;
|
||||
struct SN76496 *R = &ono_sn;
|
||||
|
||||
/* If the volume is 0, increase the counter */
|
||||
for (i = 0;i < 4;i++)
|
||||
{
|
||||
if (R->Volume[i] == 0)
|
||||
{
|
||||
/* note that I do count += length, NOT count = length + 1. You might think */
|
||||
/* it's the same since the volume is 0, but doing the latter could cause */
|
||||
/* interferencies when the program is rapidly modulating the volume. */
|
||||
if (R->Count[i] <= length*STEP) R->Count[i] += length*STEP;
|
||||
}
|
||||
}
|
||||
|
||||
while (length > 0)
|
||||
{
|
||||
int vol[4];
|
||||
unsigned int out;
|
||||
int left;
|
||||
|
||||
|
||||
/* vol[] keeps track of how long each square wave stays */
|
||||
/* in the 1 position during the sample period. */
|
||||
vol[0] = vol[1] = vol[2] = vol[3] = 0;
|
||||
|
||||
for (i = 0;i < 3;i++)
|
||||
{
|
||||
if (R->Output[i]) vol[i] += R->Count[i];
|
||||
R->Count[i] -= STEP;
|
||||
/* Period[i] is the half period of the square wave. Here, in each */
|
||||
/* loop I add Period[i] twice, so that at the end of the loop the */
|
||||
/* square wave is in the same status (0 or 1) it was at the start. */
|
||||
/* vol[i] is also incremented by Period[i], since the wave has been 1 */
|
||||
/* exactly half of the time, regardless of the initial position. */
|
||||
/* If we exit the loop in the middle, Output[i] has to be inverted */
|
||||
/* and vol[i] incremented only if the exit status of the square */
|
||||
/* wave is 1. */
|
||||
while (R->Count[i] <= 0)
|
||||
{
|
||||
R->Count[i] += R->Period[i];
|
||||
if (R->Count[i] > 0)
|
||||
{
|
||||
R->Output[i] ^= 1;
|
||||
if (R->Output[i]) vol[i] += R->Period[i];
|
||||
break;
|
||||
}
|
||||
R->Count[i] += R->Period[i];
|
||||
vol[i] += R->Period[i];
|
||||
}
|
||||
if (R->Output[i]) vol[i] -= R->Count[i];
|
||||
}
|
||||
|
||||
left = STEP;
|
||||
do
|
||||
{
|
||||
int nextevent;
|
||||
|
||||
if (R->Count[3] < left) nextevent = R->Count[3];
|
||||
else nextevent = left;
|
||||
|
||||
if (R->Output[3]) vol[3] += R->Count[3];
|
||||
R->Count[3] -= nextevent;
|
||||
if (R->Count[3] <= 0)
|
||||
{
|
||||
if (R->RNG & 1) R->RNG ^= R->NoiseFB;
|
||||
R->RNG >>= 1;
|
||||
R->Output[3] = R->RNG & 1;
|
||||
R->Count[3] += R->Period[3];
|
||||
if (R->Output[3]) vol[3] += R->Period[3];
|
||||
}
|
||||
if (R->Output[3]) vol[3] -= R->Count[3];
|
||||
|
||||
left -= nextevent;
|
||||
} while (left > 0);
|
||||
|
||||
out = vol[0] * R->Volume[0] + vol[1] * R->Volume[1] +
|
||||
vol[2] * R->Volume[2] + vol[3] * R->Volume[3];
|
||||
|
||||
if (out > MAX_OUTPUT * STEP) out = MAX_OUTPUT * STEP;
|
||||
|
||||
out /= STEP; // will be optimized to shift
|
||||
if(stereo) {
|
||||
// only left channel for stereo (will be copied to right by ym2612 mixing code)
|
||||
*buffer += out;
|
||||
buffer+=2;
|
||||
} else
|
||||
*buffer++ += out;
|
||||
|
||||
length--;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
static void SN76496_set_clock(struct SN76496 *R,int clock)
|
||||
{
|
||||
|
||||
/* the base clock for the tone generators is the chip clock divided by 16; */
|
||||
/* for the noise generator, it is clock / 256. */
|
||||
/* Here we calculate the number of steps which happen during one sample */
|
||||
/* at the given sample rate. No. of events = sample rate / (clock/16). */
|
||||
/* STEP is a multiplier used to turn the fraction into a fixed point */
|
||||
/* number. */
|
||||
R->UpdateStep = ((double)STEP * R->SampleRate * 16) / clock;
|
||||
}
|
||||
|
||||
|
||||
static void SN76496_set_gain(struct SN76496 *R,int gain)
|
||||
{
|
||||
int i;
|
||||
double out;
|
||||
|
||||
|
||||
gain &= 0xff;
|
||||
|
||||
/* increase max output basing on gain (0.2 dB per step) */
|
||||
out = MAX_OUTPUT / 3;
|
||||
while (gain-- > 0)
|
||||
out *= 1.023292992; /* = (10 ^ (0.2/20)) */
|
||||
|
||||
/* build volume table (2dB per step) */
|
||||
for (i = 0;i < 15;i++)
|
||||
{
|
||||
/* limit volume to avoid clipping */
|
||||
if (out > MAX_OUTPUT / 3) R->VolTable[i] = MAX_OUTPUT / 3;
|
||||
else R->VolTable[i] = out;
|
||||
|
||||
out /= 1.258925412; /* = 10 ^ (2/20) = 2dB */
|
||||
}
|
||||
R->VolTable[15] = 0;
|
||||
}
|
||||
|
||||
|
||||
//static
|
||||
int SN76496_init(int clock,int sample_rate)
|
||||
{
|
||||
struct SN76496 *R = &ono_sn;
|
||||
int i;
|
||||
|
||||
//R->Channel = stream_create(0,1, sample_rate,R,SN76496Update);
|
||||
sn76496_regs = R->Register;
|
||||
|
||||
R->SampleRate = sample_rate;
|
||||
SN76496_set_clock(R,clock);
|
||||
|
||||
for (i = 0;i < 4;i++) R->Volume[i] = 0;
|
||||
|
||||
R->LastRegister = 0;
|
||||
for (i = 0;i < 8;i+=2)
|
||||
{
|
||||
R->Register[i] = 0;
|
||||
R->Register[i + 1] = 0x0f; /* volume = 0 */
|
||||
}
|
||||
|
||||
for (i = 0;i < 4;i++)
|
||||
{
|
||||
R->Output[i] = 0;
|
||||
R->Period[i] = R->Count[i] = R->UpdateStep;
|
||||
}
|
||||
R->RNG = NG_PRESET;
|
||||
R->Output[3] = R->RNG & 1;
|
||||
|
||||
// added
|
||||
SN76496_set_gain(R, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
Loading…
Add table
Add a link
Reference in a new issue